David Brownell [Thu, 7 Dec 2006 01:14:03 +0000 (17:14 -0800)]
ARM: OMAP: abstract debug card setup (smc, leds)
Additional cleanup for debug boards on H2/P2/H3/H4: move the init
code that's not board-specific into a new file where it can be easily
shared between all the different boards (avoiding code duplication,
and making it easier to support more devices). Make H4 use that.
This should be easy to drop in to the OMAP1 boards using these debug
cards; the only difference seems to be that the p2 does an extra reset
of the smc using the fpga (probably all boards could do that, if it's
necessary) and doesn't use the gpio mux or request APIs.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
David Brownell [Thu, 7 Dec 2006 01:13:55 +0000 (17:13 -0800)]
ARM: OMAP: omap2/gpmc updates
GPMC updates:
- bugfixes: wrong/missing flags, omitted write, wrong test
- don't map memory segments starting at zero
- improve debug messaging
- export gpmc_get_fclk_perio]d() since it's needed to calc timings
- expect gpmc_cs_set_timings() caller to have initialized sync vs async
Note that this API is glitchy; likely the best fix would be to add
a member to "struct gpmc_timings" to hold GPMC_CONFIG1, since that
holds one key aspect of the GPMC timings (the gpmc_fclk divisor,
and sync vs. async == whether that divisor matters).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
This adds basic support for Siemens SX1. More patches are available,
with video driver, mixer, and serial ports working. That is enough to
do gsm calls with right userland.
Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Tony Lindgren <tony@atomide.com>
This adds support for the keypad on the top of the Amstrad Delta. It's
just a standard omap-keypad so all we need to do is add the keypad
layout and platform data to the board definition file.
Signed-off-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Tony Lindgren <tony@atomide.com>
General update of the board file for Palm Tungsten E. Registers the
platform devices contained in the PDA (ROM chip, keypad, infra-red)
and updates the configuration for USB and MMC, whose config values
were previously guessed in most cases due to lack of documentation
(and now are confirmed by a number of users). Macros for GPIO pins are
moved to a file in include/asm-arm/arch-omap.
Signed-off-by: Andrzej Zaborowski <balrog@zabor.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
Imre Deak [Mon, 5 Mar 2007 15:34:05 +0000 (17:34 +0200)]
ARM: OMAP: add SoSSI clock (remove manual checking of SoSSI state from idle)
The SoSSI driver should already take care of this by enabling / disabling
its clock when necessary, so this legacy callout from the PM idle code
is not needed any more.
Signed-off-by: Imre Deak <imre.deak@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
David Brownell [Mon, 2 Apr 2007 19:45:50 +0000 (12:45 -0700)]
ARM: OMAP: fix OMAP1 dmtimer build warning
Remove the OMAP1 version of omap_dm_timer_get_fclk(), and its associated
compile-time warning. It would only BUG() if called, while it's only
called on OMAP2.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
Linus Torvalds [Fri, 3 Aug 2007 22:16:33 +0000 (15:16 -0700)]
Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
[POWERPC] Fixes for the SLB shadow buffer code
[POWERPC] Fix a compile warning in powermac/feature.c
[POWERPC] Fix a compile warning in pci_32.c
[POWERPC] Fix parse_drconf_memory() for 64-bit start addresses
[POWERPC] Fix num_cpus calculation in smp_call_function_map()
[POWERPC] ps3: Fix section mismatch in ps3/setup.c
[POWERPC] spufs: Fix affinity after introduction of node_allowed() calls
[POWERPC] Fix special PTE code for secondary hash bucket
[POWERPC] Expand RPN field to 34 bits when using 64k pages
Oleg Nesterov [Fri, 3 Aug 2007 21:04:41 +0000 (01:04 +0400)]
Kill some obsolete sub-thread-ptrace stuff
There is a couple of subtle checks which were needed to handle ptracing from
the same thread group. This was deprecated a long ago, imho this code just
complicates the understanding.
And, the "->parent->signal->flags & SIGNAL_GROUP_EXIT" check in exit_notify()
is not right. SIGNAL_GROUP_EXIT can mean exec(), not exit_group(). This means
ptracer can lose a ptraced zombie on exec(). Minor problem, but still the bug.
Daniel Ritz [Fri, 3 Aug 2007 14:07:43 +0000 (16:07 +0200)]
serial: fix 8250 early console setup
the early setup function serial8250_console_early_setup() can be called
from non __init code (eg. hotpluggable serial ports like serial_cs) so
remove the __init from the call chain to avoid crashes.
Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Cc: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 3 Aug 2007 21:57:41 +0000 (14:57 -0700)]
Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
[TCP]: DSACK signals data receival, be conservative
[TCP]: Also handle snd_una changes in tcp_cwnd_down
[TIPC]: Fix two minor sparse warnings.
[TIPC]: Make function tipc_nameseq_subscribe static.
[PF_KEY]: Fix ipsec not working in 2.6.23-rc1-git10
[TCP]: Invoke tcp_sendmsg() directly, do not use inet_sendmsg().
[IPV4] route.c: mostly kmalloc + memset conversion to k[cz]alloc
[IPV4] raw.c: kmalloc + memset conversion to kzalloc
[NETFILTER] nf_conntrack_l3proto_ipv4_compat.c: kmalloc + memset conversion to kzalloc
[NETFILTER] nf_conntrack_expect.c: kmalloc + memset conversion to kzalloc
[NET]: Removal of duplicated include net/wanrouter/wanmain.c
SCTP: remove useless code in function sctp_init_cause
SCTP: drop SACK if ctsn is not less than the next tsn of assoc
SCTP: IPv4 mapped addr not returned in SCTPv6 accept()
SCTP: IPv4 mapped addr not returned in SCTPv6 accept()
sctp: fix shadow symbol in net/sctp/tsnmap.c
sctp: try to fix readlock
sctp: remove shadowed symbols
sctp: move global declaration to header file.
sctp: make locally used function static
Satyam Sharma [Fri, 3 Aug 2007 02:57:13 +0000 (08:27 +0530)]
[MTD] Makefile fix for mtdsuper
We want drivers/mtd/{mtdcore, mtdsuper, mtdpart}.c to be built and linked
into the same mtd.ko module. Fix the Makefile to ensure this, and remove
duplicate MODULE_ declarations in mtdpart.c, as mtdcore.c already has them.
Signed-off-by: Satyam Sharma <satyam@infradead.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Michael Neuling [Fri, 3 Aug 2007 01:55:39 +0000 (11:55 +1000)]
[POWERPC] Fixes for the SLB shadow buffer code
On a machine with hardware 64kB pages and a kernel configured for a
64kB base page size, we need to change the vmalloc segment from 64kB
pages to 4kB pages if some driver creates a non-cacheable mapping in
the vmalloc area. However, we never updated with SLB shadow buffer.
This fixes it. Thanks to paulus for finding this.
Also added some write barriers to ensure the shadow buffer contents
are always consistent.
Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
[POWERPC] Fix parse_drconf_memory() for 64-bit start addresses
Some new machines use the "ibm,dynamic-reconfiguration-memory" property
to provide memory layout information, rather than via memory nodes.
There is a bug in the code to parse this property for start addresses
over 4GB; we store the start address in an unsigned int, which means
we throw away the high bits and add apparently duplicate regions.
This results in a BUG() in free_bootmem_core(). This fixes it by
using an unsigned long instead.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
Kevin Corry [Tue, 31 Jul 2007 20:19:46 +0000 (06:19 +1000)]
[POWERPC] Fix num_cpus calculation in smp_call_function_map()
In smp_call_function_map(), num_cpus is set to the number of online
CPUs minus one. However, if the CPU mask does not include all CPUs
(except the one we're running on), the routine will hang in the first
while() loop until the 8 second timeout occurs.
The num_cpus should be set to the number of CPUs specified in the mask
passed into the routine, after we've made any modifications to the
mask. With this change, we can also get rid of the call to
cpus_empty() and avoid adding another pass through the bitmask.
Signed-off-by: Kevin Corry <kevcorry@us.ibm.com> Signed-off-by: Carl Love <carll@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
Andre Detsch [Mon, 30 Jul 2007 23:48:11 +0000 (09:48 +1000)]
[POWERPC] spufs: Fix affinity after introduction of node_allowed() calls
This patch fixes affinity reference point placement, which was not being
done in some situations, after the introduction of node_allowed() calls.
The previously used parameter, 'ctx', is just the iterator of the
previous list_for_each_entry_reverse loop, and its value might be
invalid at the end of the loop. Also, the right context to seek
for information when defining the reference ctx location
_is_ the reference ctx.
Signed-off-by: Andre Detsch <adetsch@br.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
Paul Mackerras [Fri, 3 Aug 2007 09:16:11 +0000 (19:16 +1000)]
[POWERPC] Fix special PTE code for secondary hash bucket
The code for mapping special 4k pages on kernels using a 64kB base
page size was missing the code for doing the RPN (real page number)
manipulation when inserting the hardware PTE in the secondary hash
bucket. It needs the same code as has already been added to the
code that inserts the HPTE in the primary hash bucket. This adds it.
Paul Mackerras [Fri, 3 Aug 2007 04:08:24 +0000 (14:08 +1000)]
[POWERPC] Expand RPN field to 34 bits when using 64k pages
The real page number field in our PTEs when configured for 64kB pages
is currently 32 bits, which turns out to be not quite enough for the
resources that the eHCA driver wants to map. This expands the RPN
field to include 2 adjacent, previously-unused bits.
Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Ilpo Järvinen [Fri, 3 Aug 2007 02:46:58 +0000 (19:46 -0700)]
[TCP]: Also handle snd_una changes in tcp_cwnd_down
tcp_cwnd_down must check for it too as it should be conservative
in case of collapse stuff and also when receiver is trying to
lie (though that wouldn't be very successful/useful anyway).
Note:
- Separated also is_dupack and do_lost in fast_retransalert
* Much cleaner look-and-feel now
* This time it really fixes cumulative ACK with many new
SACK blocks recovery entry (I claimed this fixes with
last patch but it wasn't). TCP will now call
tcp_update_scoreboard regardless of is_dupack when
in recovery as long as there is enough fackets_out.
- Introduce FLAG_SND_UNA_ADVANCED
* Some prior_snd_una arguments are unnecessary after it
- Added helper FLAG_ANY_PROGRESS to avoid long FLAG...|FLAG...
constructs
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
Joy Latten [Fri, 3 Aug 2007 02:25:43 +0000 (19:25 -0700)]
[PF_KEY]: Fix ipsec not working in 2.6.23-rc1-git10
Although an ipsec SA was established, kernel couldn't seem to find it.
I think since we are now using "x->sel.family" instead of "family" in
the xfrm_selector_match() called in xfrm_state_find(), af_key needs to
set this field too, just as xfrm_user.
In af_key.c, x->sel.family only gets set when there's an
ext_hdrs[SADB_EXT_ADDRESS_PROXY-1] which I think is for tunnel.
I think pfkey needs to also set the x->sel.family field when it is 0.
Tested with below patch, and ipsec worked when using pfkey.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 3 Aug 2007 02:23:56 +0000 (19:23 -0700)]
[TCP]: Invoke tcp_sendmsg() directly, do not use inet_sendmsg().
As discovered by Evegniy Polyakov, if we try to sendmsg after
a connection reset, we can do incredibly stupid things.
The core issue is that inet_sendmsg() tries to autobind the
socket, but we should never do that for TCP. Instead we should
just go straight into TCP's sendmsg() code which will do all
of the necessary state and pending socket error checks.
TCP's sendpage already directly vectors to tcp_sendpage(), so this
merely brings sendmsg() in line with that.
Signed-off-by: David S. Miller <davem@davemloft.net>
Magnus Damm [Fri, 3 Aug 2007 01:17:47 +0000 (10:17 +0900)]
sh: fix defconfigs for sh7751r boards
This patch fixes up the defconfig for various sh7751r based boards
by updating them to the single cpu subtype CONFIG_CPU_SUBTYPE_SH7751R.
The following sh4 boards are updated: hs7751rvoip, landisk, lboxre2,
systemh, titan.
The current defconfigs with two subtypes defined trigger a configuration
bug which result in kernel configurations with missing board support
code. We end up with kernels without board code and with generic machvec
only.
So we need this patch to make sure the board code gets compiled in.
Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Ben Dooks [Mon, 28 May 2007 18:17:54 +0000 (19:17 +0100)]
[MTD] [NAND] nand_base.c: fix type of eccpos pointer
The nand_base.c driver implicitly casts the uint32_t
eccpos array to 'int *', which is not only not guaranteed
to be the same sign as the source, but is not guaranteed
to be the same size.
Fix by changing nand_base.c to use uint32_t
referencing the eccpos fields.
Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
When we mark block bad we have to get chip because this involves
writing to the page's OOB. We hit this bug in UBI - we observed
random obscure crashes when it marks block bad from the background
thread and there is some parallel task which utilizes flash.
This patch also adds a TODO note about BBT table protection which
it seems does not exist.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Roland Stigge [Wed, 18 Jul 2007 12:56:11 +0000 (14:56 +0200)]
[MTD] [NAND] Fix refactoring of EDB7312 hwcontrol function.
The patch ensures that the current code (kernel 2.6.22) uses the bits
like the code prior to the refactoring. The variable "bits" is employed
in a useful way now.
Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
David Woodhouse [Thu, 28 Jun 2007 18:49:36 +0000 (19:49 +0100)]
[JFFS2] Fix suspend failure with JFFS2 GC thread.
The try_to_freeze() call was in the wrong place; we need it in the
signal-pending loop now that a pending freeze also makes
signal_pending() return true.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Joakim Tjernlund [Sun, 24 Jun 2007 17:22:29 +0000 (19:22 +0200)]
[JFFS2] Prevent oops after 'node added in wrong place' debug check
jffs2_add_physical_node_ref() should never really return error -- it's
an internal debugging check which triggered. We really need to work out
why and stop it happening. But in the meantime, let's make the failure
mode a little less nasty.
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
projects / linux-2.6-omap-h63xx.git / log