]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/log
linux-2.6-omap-h63xx.git
16 years agolibata: make ata_port_queue_task() an internal function
Jeff Garzik [Wed, 19 Dec 2007 09:25:10 +0000 (04:25 -0500)]
libata: make ata_port_queue_task() an internal function

ata_port_queue_task() served a single user:  ata_pio_task()

Rename to ata_pio_queue_task() and un-export it, as nobody outside of
libata-core.c uses it.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agopata_pcmcia: Minor cleanups and support for dual channel cards
Alan Cox [Mon, 19 Nov 2007 14:43:07 +0000 (14:43 +0000)]
pata_pcmcia: Minor cleanups and support for dual channel cards

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agolibata/pata_it821x: Improve handling of poorly compatible emulations
Alan Cox [Thu, 25 Oct 2007 13:21:16 +0000 (14:21 +0100)]
libata/pata_it821x: Improve handling of poorly compatible emulations

Some it821x RAID firmwares return 0 for the err return off both devices.
A similar issue occurs with the slave returning 0 not 1 if you plug a
gigabyte sata ramdisk into a controller that fakes two SATA ports as
master/slave on an SFF channel.

The patch does the following

- Allow the 'failed diagnostics' case on both master and slave
- Move the HORKAGE_DIAGNOSTIC check after ->dev_config

This second change also allows IT821x to fix up a problem where we report
drive diagnostic failures when in fact the drive is fine but the
microcontroller firmware doesn't appear to get it right. IT821x clears
the flag again to avoid giving the user bogus warnings about their disk.

The other IT821x change is a bit ugly, we slightly abuse the cable type
hook to fiddle with the identify data for the devices. We could add a new
hook for this but as we have only one offender and no more seeming likely
it seems better to keep libata-core clean.

Please let this sit in -mm briefly, just in case the relaxed checking
breaks some other emulated interface.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agopata_pcmcia: Add support for dumb 8bit IDE emulations
Alan Cox [Mon, 15 Oct 2007 19:44:11 +0000 (20:44 +0100)]
pata_pcmcia: Add support for dumb 8bit IDE emulations

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agolibata: make qc->nbytes include extra buffers
Tejun Heo [Wed, 5 Dec 2007 07:43:12 +0000 (16:43 +0900)]
libata: make qc->nbytes include extra buffers

qc->nbytes didn't use to include extra buffers setup by libata core
layer and my be odd.  This patch makes qc->nbytes include any extra
buffers setup by libata core layer and guaranteed to be aligned on 4
byte boundary.

This value is to be used to program the host controller.  As this
represents the actual length of buffer available to the controller and
the controller must be able to deal with short transfers for ATAPI
commands which can transfer variable length, this shouldn't break any
controllers while making problems like rounding-down and controllers
choking up on odd transfer bytes much less likely.

The unmodified value is stored in new field qc->raw_nbytes.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agolibata: convert to chained sg
Tejun Heo [Wed, 5 Dec 2007 07:43:11 +0000 (16:43 +0900)]
libata: convert to chained sg

libata used private sg iterator to handle padding sg.  Now that sg can
be chained, padding can be handled using standard sg ops.  Convert to
chained sg.

* s/qc->__sg/qc->sg/

* s/qc->pad_sgent/qc->extra_sg[]/.  Because chaining consumes one sg
  entry.  There need to be two extra sg entries.  The renaming is also
  for future addition of other extra sg entries.

* Padding setup is moved into ata_sg_setup_extra() which is organized
  in a way that future addition of other extra sg entries is easy.

* qc->orig_n_elem is unused and removed.

* qc->n_elem now contains the number of sg entries that LLDs should
  map.  qc->mapped_n_elem is added to carry the original number of
  mapped sgs for unmapping.

* The last sg of the original sg list is used to chain to extra sg
  list.  The original last sg is pointed to by qc->last_sg and the
  content is stored in qc->saved_last_sg.  It's restored during
  ata_sg_clean().

* All sg walking code has been updated.  Unnecessary assertions and
  checks for conditions the core layer already guarantees are removed.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agolibata: change ATA_QCFLAG_DMAMAP semantics
Tejun Heo [Wed, 5 Dec 2007 07:43:10 +0000 (16:43 +0900)]
libata: change ATA_QCFLAG_DMAMAP semantics

ATA_QCFLAG_DMAMAP was a bit peculiar in that it got set during qc
initialization and cleared if DMA mapping wasn't necessary.  Make it
more straight forward by making the following changes.

* Don't set it during initialization.  Set it after DMA is actually
  mapped.

* Add BUG_ON() to guarantee that there is data to transfer if DMAMAP
  is set.  This always holds for the current code.  The BUG_ON() is
  for docummentation and sanity check.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agolibata: kill non-sg DMA interface
Tejun Heo [Wed, 5 Dec 2007 07:43:09 +0000 (16:43 +0900)]
libata: kill non-sg DMA interface

With atapi_request_sense() converted to use sg, there's no user of
non-sg interface.  Kill non-sg interface.

* ATA_QCFLAG_SINGLE and ATA_QCFLAG_SG are removed.  ATA_QCFLAG_DMAMAP
  is used instead.  (this way no LLD change is necessary)

* qc->buf_virt is removed.

* ata_sg_init_one() and ata_sg_setup_one() are removed.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Rusty Russel <rusty@rustcorp.com.au>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agolibata: update ->data_xfer hook for ATAPI
Tejun Heo [Wed, 5 Dec 2007 07:43:07 +0000 (16:43 +0900)]
libata: update ->data_xfer hook for ATAPI

Depending on how many bytes are transferred as a unit, PIO data
transfer may consume more bytes than requested.  Knowing how much
data is consumed is necessary to determine how much is left for
draining.  This patch update ->data_xfer such that it returns the
number of consumed bytes.

While at it, it also makes the following changes.

* s/adev/dev/
* use READ/WRITE constants for rw indication
* misc clean ups

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agolibata: add ATAPI_* cmd types and implement atapi_cmd_type()
Tejun Heo [Wed, 5 Dec 2007 07:43:06 +0000 (16:43 +0900)]
libata: add ATAPI_* cmd types and implement atapi_cmd_type()

Add ATAPI command types - ATAPI_READ, WRITE, RW_BUF, READ_CD and MISC,
and implement atapi_cmd_type() which takes SCSI opcode and returns to
which class the opcode belongs.  This will be used later to improve
ATAPI handling.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agolibata: rename ATA_PROT_ATAPI_* to ATAPI_PROT_*
Tejun Heo [Tue, 18 Dec 2007 21:34:43 +0000 (16:34 -0500)]
libata: rename ATA_PROT_ATAPI_* to ATAPI_PROT_*

ATA_PROT_ATAPI_* are ugly and naming schemes between ATA_PROT_* and
ATA_PROT_ATAPI_* are inconsistent causing confusion.  Rename them to
ATAPI_PROT_* and make them consistent with ATA counterpart.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agocdrom: add more GPCMD_* constants
Tejun Heo [Wed, 5 Dec 2007 07:43:04 +0000 (16:43 +0900)]
cdrom: add more GPCMD_* constants

Add GPCMD_* constants for READ_BUFFER, WRITE_12 and WRITE_BUFFER for
completeness.  These will be used libata.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agolibata: zero xfer length on ATAPI data xfer IRQ is HSM violation
Albert Lee [Wed, 5 Dec 2007 07:43:02 +0000 (16:43 +0900)]
libata: zero xfer length on ATAPI data xfer IRQ is HSM violation

Treat zero xfer length as HSM violation.  While at it, add
unlikely()'s to ATAPI ireason and transfer length checks.

tj: Formatted patch and added unlikely()'s.

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agolibata: make atapi_request_sense() use sg
Tejun Heo [Wed, 5 Dec 2007 07:43:01 +0000 (16:43 +0900)]
libata: make atapi_request_sense() use sg

atapi_request_sense() is now the only left user of ata_sg_init_one().
Convert it to use sg interface.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Rusty Russel <rusty@rustcorp.com.au>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agolibata: convert NCQ test in ata_qc_issue() to ata_is_ncq()
Tejun Heo [Wed, 5 Dec 2007 01:36:13 +0000 (10:36 +0900)]
libata: convert NCQ test in ata_qc_issue() to ata_is_ncq()

I missed one while converting to ata_is_*() protocol test helpers.
Convert it.  Pointed out by Jeff Garzik.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agopata_hpt37x: checkpatch fixes
Andrew Morton [Fri, 14 Dec 2007 00:01:38 +0000 (16:01 -0800)]
pata_hpt37x: checkpatch fixes

WARNING: line over 80 characters
#70: FILE: drivers/ata/pata_hpt37x.c:850:
+ struct pci_dev *pdev_0 = pci_get_slot(pdev->bus, pdev->devfn - 1);

ERROR: else should follow close brace '}'
#78: FILE: drivers/ata/pata_hpt37x.c:858:
+ }
+ else

total: 1 errors, 1 warnings, 100 lines checked
Your patch has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.

Please run checkpatch prior to sending patches

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agodrivers/ata/libata-eh.c: fix printk warning
Andrew Morton [Fri, 14 Dec 2007 00:01:37 +0000 (16:01 -0800)]
drivers/ata/libata-eh.c: fix printk warning

drivers/ata/libata-eh.c: In function `ata_port_pbar_desc':
drivers/ata/libata-eh.c:215: warning: long long unsigned int format, long unsigned int arg (arg 4)

Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agopata_amd: update mode selection for NV PATAs
Tejun Heo [Tue, 18 Dec 2007 07:33:07 +0000 (16:33 +0900)]
pata_amd: update mode selection for NV PATAs

Cable detection on NV PATA hosts isn't implemented and the CBLID-
cable isn't wired according to the sepc either, so both host-side and
generic drive-side cable detections are broken.  Till now,
nv_cable_detect() relied on peeking BIOS and ACPI configurations to
upgrade to 80C but this often results in misdetection of 40C cable as
80C.  Also, the original implementation was broken in that by the time
BIOS configuration is read it has already been cleared by programming
PIO0 during reset.

This patch reimplements NV mode selection such that...

* BIOS configuration value is stored during driver attach and restored
  on detach.

* Cable type is fixed to ATA_CBL_PATA_IGN and mode selection is soley
  done by nv_mode_filter() which peeks both BIOS and ACPI
  configurations and filter accordingly.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agolibata: reimplement ata_acpi_cbl_80wire() using ata_acpi_gtm_xfermask()
Tejun Heo [Tue, 18 Dec 2007 07:33:06 +0000 (16:33 +0900)]
libata: reimplement ata_acpi_cbl_80wire() using ata_acpi_gtm_xfermask()

Reimplement ata_acpi_cbl_80wire() using ata_acpi_gtm_xfermask() and
while at it relocate the function below ata_acpi_gtm_xfermask().

New ata_acpi_cbl_80wire() implementation takes @gtm, in both pata_via
and pata_amd, use the initial GTM value.  Both are trying to peek
initial BIOS configuration, so using initial caching value makes
sense.  This fixes ACPI part of cable detection in pata_amd which
previously always returned 0 because configuring PIO0 during reset
clears DMA configuration.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agolibata: implement ata_timing_cycle2mode() and use it in libata-acpi and pata_acpi
Tejun Heo [Tue, 18 Dec 2007 07:33:05 +0000 (16:33 +0900)]
libata: implement ata_timing_cycle2mode() and use it in libata-acpi and pata_acpi

libata-acpi is using separate timing tables for transfer modes
although libata-core has the complete ata_timing table.  Implement
ata_timing_cycle2mode() to look for matching mode given transfer type
and cycle duration and use it in libata-acpi and pata_acpi to replace
private timing tables.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agolibata: fix ata_acpi_gtm_xfermask()
Tejun Heo [Tue, 18 Dec 2007 07:33:04 +0000 (16:33 +0900)]
libata: fix ata_acpi_gtm_xfermask()

ata_acpi_gtm_xfermask() as separated out from pacpi_discover_modes()
has various bugs.  Fix them.

* The wrong comparison operator is used when finding for matching
  cycle resulting totally bogus result.

* With the comparion operator fixed, boundary condtion handling is
  clumsy.

* Setting of any DMA mask bit set all bits in PIO mask.

* MWDMA and UDMA blocks are swapped.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agolibata: separate out ata_acpi_gtm_xfermask() from pacpi_discover_modes()
Tejun Heo [Tue, 18 Dec 2007 07:33:03 +0000 (16:33 +0900)]
libata: separate out ata_acpi_gtm_xfermask() from pacpi_discover_modes()

Finding out matching transfer mode from ACPI GTM values is useful for
other purposes too.  Separate out the function and timing tables from
pata_acpi::pacpi_discover_modes().

Other than checking shared-configuration bit after doing
ata_acpi_gtm() in pacpi_discover_modes() which should be safe, this
patch doesn't introduce any behavior change.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agoata_piix: separate controller IDs into separate enum
Tejun Heo [Sat, 24 Nov 2007 12:16:07 +0000 (21:16 +0900)]
ata_piix: separate controller IDs into separate enum

Separate controller IDs into a separate enum as Jeff requested.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agosata_promise: make pdc_atapi_pkt() use values from qc->tf
Tejun Heo [Tue, 4 Dec 2007 04:33:30 +0000 (13:33 +0900)]
sata_promise: make pdc_atapi_pkt() use values from qc->tf

Make pdc_atapi_pkt() use values from qc->tf instead of creating its
own.  This is to ease future ATAPI handling changes.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agolibata: add ATA_CBL_PATA_IGN
Tejun Heo [Tue, 27 Nov 2007 10:43:48 +0000 (19:43 +0900)]
libata: add ATA_CBL_PATA_IGN

ATA_CBL_PATA_UNK indicates that the cable type can't be determined
from the host side and might be either 80c or 40c.  libata applies
drive or other generic limit in this case.  However, there are
controllers where both host and drive side detections are
misimplemented and the driver has to rely solely on private method -
peeking BIOS or ACPI configuration or using some other private
mechanism.

This patch adds ATA_CBL_PATA_IGN which tells libata to ignore the
cable type completely and just let the LLD determine the transfer mode
via host transfer mode masks and ->mode_filter().

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agolibata: xfer_mask is unsigned long not unsigned int
Tejun Heo [Tue, 27 Nov 2007 10:43:42 +0000 (19:43 +0900)]
libata: xfer_mask is unsigned long not unsigned int

Jeff says xfer_mask is unsigned long not unsigned int.  Convert all
xfermask fields and handling functions to deal with unsigned longs.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agolibata: kill ata_id_to_dma_mode()
Tejun Heo [Tue, 27 Nov 2007 10:43:41 +0000 (19:43 +0900)]
libata: kill ata_id_to_dma_mode()

ata_id_to_dma_mode() isn't quite generic.  The function is basically
privately implemented ata_id_xfermask() combined with hardcoded mode
printing and configuration which are specific to ata_generic.

Kill the function and open code it in generic_set_mode() using generic
xfermode handling functions.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agolibata: clean up xfermode / PATA timing related stuff
Tejun Heo [Tue, 27 Nov 2007 10:43:40 +0000 (19:43 +0900)]
libata: clean up xfermode / PATA timing related stuff

* s/ATA_BITS_(PIO|MWDMA|UDMA)/ATA_NR_\1_MODES/g

* Consistently use 0xff to indicate invalid transfer mode (0x00 is
  valid for PIO_SLOW).

* Make ata_xfer_mode2mask() return proper mode mask instead of just
  the highest bit.

* Sort ata_timing table in increasing xfermode order and update
  ata_timing_find_mode() accordingly.

This patch doesn't introduce any behavior change.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agolibata: export xfermode / PATA timing related functions
Tejun Heo [Tue, 27 Nov 2007 10:43:39 +0000 (19:43 +0900)]
libata: export xfermode / PATA timing related functions

Export the following xfermode related functions.

* ata_pack_xfermask()
* ata_unpack_xfermask()
* ata_xfer_mask2mode()
* ata_xfer_mode2mask()
* ata_xfer_mode2shift()
* ata_mode_string()
* ata_id_xfermask()
* ata_timing_find_mode()

These functions will be used later by LLD updates.  While at it,
change unsigned short @speed to u8 @xfer_mode in
ata_timing_find_mode() for consistency.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agoata_generic: unindent loop in generic_set_mode()
Tejun Heo [Tue, 27 Nov 2007 10:43:38 +0000 (19:43 +0900)]
ata_generic: unindent loop in generic_set_mode()

Unindent loop body in generic_set_mode().  This is to ease future
change.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years ago[libata] Build fix WRT ata_is_xxx() new API introduction
Jeff Garzik [Sat, 1 Dec 2007 23:05:39 +0000 (18:05 -0500)]
[libata] Build fix WRT ata_is_xxx() new API introduction

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agolibata: implement fast speed down for unverified data transfer mode
Tejun Heo [Tue, 27 Nov 2007 10:28:59 +0000 (19:28 +0900)]
libata: implement fast speed down for unverified data transfer mode

It's very likely that the configured data transfer mode is the wrong
one if device fails data transfers right after initial data transfer
mode configuration (including NCQ on/off and xfermode).  libata EH
needs to speed down fast before upper layers give up on probing.

This patch implement fast speed down rules to handle such cases
better.  Error occured while data transfer hasn't been verified
trigger fast back-to-back speed down actions until data transfer
works.

This change will make cable mis-detection and other initial
configuration problems corrected before partition scanning code gives
up.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agolibata: implement ATA_DFLAG_DUBIOUS_XFER
Tejun Heo [Tue, 27 Nov 2007 10:28:58 +0000 (19:28 +0900)]
libata: implement ATA_DFLAG_DUBIOUS_XFER

ATA_DFLAG_DUBIOUS_XFER is set whenever data transfer speed or method
changes and gets cleared when data transfer command succeeds in the
newly configured transfer mode.

This will be used to improve speed down logic.

Signed-off-by: Tejun Heo <htejun@gmail.com<
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agolibata: adjust speed down rules
Tejun Heo [Tue, 27 Nov 2007 10:28:57 +0000 (19:28 +0900)]
libata: adjust speed down rules

Speed down rules were too conservative.  Adjust them a bit.

* More than 10 timeouts can't happen in 5 minutes as command timeout
  is 30secs.  Lower the limit for rule #1 to 6.

* 10 timeouts is too high for rule #3 too.  Lower it to 6.

* SATAPI can benefit from falling back to PIO too.  Allow SATAPI
  devices to fall back to PIO.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agolibata: clean up EH speed down implementation
Tejun Heo [Tue, 27 Nov 2007 10:28:56 +0000 (19:28 +0900)]
libata: clean up EH speed down implementation

Clean up EH speed down implementation.

* is_io boolean variable is replaced eflags.  is_io is ATA_EFLAG_IS_IO.

* Error categories now have names.

* Better comments.

* Reorder 5min and 10min rules in ata_eh_speed_down_verdict()

* Use local variable @link to cache @dev->link in ata_eh_speed_down()

These changes are to improve readability and ease further changes.
This patch doesn't introduce any behavior change.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agolibata: move ata_set_mode() to libata-eh.c
Tejun Heo [Tue, 27 Nov 2007 10:28:55 +0000 (19:28 +0900)]
libata: move ata_set_mode() to libata-eh.c

Move ata_set_mode() to libata-eh.c.  ata_set_mode() is surely an EH
action and will be more tightly coupled with the rest of error
handling.  Move it to libata-eh.c.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agolibata: factor out ata_eh_schedule_probe()
Tejun Heo [Tue, 27 Nov 2007 10:28:54 +0000 (19:28 +0900)]
libata: factor out ata_eh_schedule_probe()

Factor out ata_eh_schedule_probe() from ata_eh_handle_dev_fail() and
ata_eh_recover().  This is to improve maintainability and make future
changes easier.

In the previous revision, ata_dev_enabled() test was accidentally
dropped while factoring out.  This problem was spotted by Bartlomiej.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agolibata: implement protocol tests
Tejun Heo [Tue, 27 Nov 2007 10:28:53 +0000 (19:28 +0900)]
libata: implement protocol tests

Implement protocol tests - ata_is_atapi(), ata_is_nodata(),
ata_is_pio(), ata_is_dma(), ata_is_ncq() and ata_is_data() and use
them to replace is_atapi_taskfile() and hard coded protocol tests.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agolibata: rearrange ATA_DFLAG_*
Tejun Heo [Tue, 27 Nov 2007 10:28:52 +0000 (19:28 +0900)]
libata: rearrange ATA_DFLAG_*

Area for DFLAGs which are cleared on INIT is full.  Extend it by 8
bits.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agolibata: checkpatch fixes
Jeff Garzik [Sat, 24 Nov 2007 02:12:14 +0000 (21:12 -0500)]
libata: checkpatch fixes

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agoahci: update PCS programming
Tejun Heo [Mon, 19 Nov 2007 07:03:44 +0000 (16:03 +0900)]
ahci: update PCS programming

For intel ones, ahci unconditionally OR'd 0xf to PCS.  This isn't
correct for the following cases.

* ich6/7m's which only implement P0 and P2 (0xf works fine tho)

* ich8/9's which have six ports and needs 0x3f to enable all ports

This patch updates PCS programming such that...

* port_map determined by ahci_save_initial_config() is OR'd instead of 0xf

* PCS is updated only if necessary (there are turned off enable bits)

port_map is determined from PORTS_IMPL PCI register which is
implemented as write or write-once register.  If the register isn't
programmed, ahci automatically generates it from number of ports,
which is good enough for PCS programming.  ICH6/7M are probably the
only ones where non-contiguous enable bits are necessary && PORTS_IMPL
isn't programmed properly but they're proven to work reliably with 0xf
anyway.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agopata_ninja32: Cardbus ATA initial support
Alan Cox [Mon, 19 Nov 2007 14:45:53 +0000 (14:45 +0000)]
pata_ninja32: Cardbus ATA initial support

Lots of work needed to bring it up to scratch but it does work so you can
now use the card. That makes it at least useful, especially as the other
cardbus cards are usually INIC162x which aren't yet supported well.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agolibata-sff: tf_load
Alan Cox [Mon, 19 Nov 2007 14:34:56 +0000 (14:34 +0000)]
libata-sff: tf_load

Jeff said he preferred that the SFF tf_load followed the spec and we
documented that anyone who needed different overrode it, rather than it
using the ->check_status methods. No driver relies on the current behaviour.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agolibata: IORDY handling
Alan Cox [Mon, 19 Nov 2007 14:33:11 +0000 (14:33 +0000)]
libata: IORDY handling

I believe this version meets all Sergei's objections

Correct the logic for when we issue a set features for transfer mode

- If the device has IORDY and the controller has IORDY - set the mode
- If the device has IORDY and the controller does not - turn IORDY off
- If neither has IORDY do nothing

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agolibata-acpi: add ACPI _PSx method
Shaohua Li [Fri, 2 Nov 2007 01:32:38 +0000 (09:32 +0800)]
libata-acpi: add ACPI _PSx method

ACPI spec (ver 3.0a, p289) requires IDE power on/off executes ACPI _PSx
methods. As recently most PATA drivers use libata, this patch adds _PSx
method support in libata. ACPI spec doesn't mention if SATA requires the
same _PSx method.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Len Brown <len.brown@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agolibata: Disable ATA8-ACS proposed Trusted Computing features by default
Alan Cox [Mon, 5 Nov 2007 03:05:49 +0000 (22:05 -0500)]
libata: Disable ATA8-ACS proposed Trusted Computing features by default

Historically word 48 in the identify data was used to mean 32bit I/O
was supported for VLB IDE etc. ATA8 reassigns this word to the Trusted
Computing Group, where it is used for TCG features. This means that
an ATA8 TCG drive is going to trigger 32bit I/O on some systems which
will be funny.

Anyway we need to sort this out ready for ATA8 so:
- Reorder the ata.h header a bit so the ata_version function occurs early
  in it
- Make dword_io check the ATA version
- Add an ATA8 version checking TCG presence test

While we are at it the current drafts have a flaw where it may not be
possible to disable TCG features at boot (and opt out of the trusted
model) as TCG intends because it relies on presence of a different
optional feature (DCS). Handle this in software by refusing the TCG
commands if libata.allow_tpm is not set. (We must make it possible
as some environments such as proprietary VDR devices will doubtless
want to use it to lock up content)

Finally as with CPRM print a warning so that the user knows they may
not be able to full access and use the device.

Signed-off-by: Alan Cox <alan@redhat.com>
16 years agoata_piix: Add Toshiba Satellite R20 and Tecra M6 to broken suspend list.
Peter Schwenke [Thu, 17 Jan 2008 13:08:55 +0000 (23:08 +1000)]
ata_piix: Add Toshiba Satellite R20 and Tecra M6 to broken suspend list.

Add Toshiba Satellite R20 and Tecra M6 to broken suspend list.  Matt
Piermarini reported and provided the M6 patch.  This is from OSDL bug 7780.

Signed-off-by: Peter Schwenke <peter@bluetoad.com.au>
Cc: Matt Piermarini <mattpiermarini@yahoo.com>
Acked-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agox86: GEODE fix a race condition in the MFGPT timer tick
Jordan Crouse [Tue, 22 Jan 2008 22:30:16 +0000 (23:30 +0100)]
x86: GEODE fix a race condition in the MFGPT timer tick

When we set the MFGPT timer tick, there is a chance that we'll
immediately assert an event.  If for some reason the IRQ routing
for this clock has been setup for some other purpose, then we
could end up firing an interrupt into the SMM handler or worse.

This rearranges the timer tick init function to initalize the handler
before we set up the MFGPT clock to make sure that even if we get
an event, it will go to the handler.

Furthermore, in the handler we need to make sure that we clear the
event, even if the timer isn't running.

Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Tested-by: Arnd Hannemann <hannemann@i4.informatik.rwth-aachen.de>
16 years agoFix file references in documentation and Kconfig
Johann Felix Soden [Sun, 20 Jan 2008 13:41:18 +0000 (14:41 +0100)]
Fix file references in documentation and Kconfig

Fix typo in arch/powerpc/boot/flatdevtree_env.h.
There is no Documentation/networking/ixgbe.txt.

README.cycladesZ is now in Documentation/.
wavelan.p.h is now in drivers/net/wireless/.
HFS.txt is now Documentation/filesystems/hfs.txt.
OSS-files are now in sound/oss/.

Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoMerge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6
Linus Torvalds [Tue, 22 Jan 2008 17:25:55 +0000 (09:25 -0800)]
Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6

* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6:
  hwmon: (it87) request only Environment Controller ports

16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86
Linus Torvalds [Tue, 22 Jan 2008 17:19:06 +0000 (09:19 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86

* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86:
  Revert "x86: fix NMI watchdog & 'stopped time' problem"

16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched
Linus Torvalds [Tue, 22 Jan 2008 17:18:45 +0000 (09:18 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched

* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched:
  sched: group scheduler, set uid share fix

16 years agorcu: fix section mismatch
Randy Dunlap [Tue, 22 Jan 2008 11:31:39 +0000 (03:31 -0800)]
rcu: fix section mismatch

rcu_online_cpu() should be __cpuinit instead of __devinit.

WARNING: vmlinux.o(.text+0x4b6d5): Section mismatch: reference to .init.text: (between 'rcu_cpu_notify' and 'wakeme_after_rcu')

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoW1: w1_therm.c is flagging 0C etc as invalid
David Fries [Tue, 22 Jan 2008 11:31:39 +0000 (03:31 -0800)]
W1: w1_therm.c is flagging 0C etc as invalid

The extra rom[0] check is flagging valid temperatures as invalid when
there is already a CRC data transmission check.

w1_therm_read_bin()
if (rom[8] == crc && rom[0])
verdict = 1;

Requiring rom[0] to be non-zero will flag as invalid temperature
conversions when the low byte is zero, specifically the temperatures 0C,
16C, 32C, 48C, -16C, -32C, and -48C.

The CRC check is produced on the device for the previous 8 bytes and is
required to ensure the data integrity in transmission.  I don't see why the
extra check for rom[0] being non-zero is in there.  Evgeniy Polyakov didn't
know either.  Just for a check I unplugged the sensor, executed a
temperature conversion, and read the results.  The read was all ff's, which
also failed the CRC, so it doesn't need to protect against a disconnected
sensor.

I have more extensive patches in the work, but these two trivial ones will
do for today.  I would like to hear from people who use the ds2490 USB to
one wire dongle.  1 if you would be willing to test the patches as I
currently only have the one sensor on a short parisite powered wire, 2 if
there is any cheap sources for the ds2490.

Signed-off-by: David Fries <david@fries.net>
Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoW1: w1_therm.c ds18b20 decode freezing temperatures correctly
David Fries [Tue, 22 Jan 2008 11:31:37 +0000 (03:31 -0800)]
W1: w1_therm.c ds18b20 decode freezing temperatures correctly

Correct the decoding of negative C temperatures.  The code did a binary OR
of two bytes to make a 16 bit value, but assignd it to an integer.  This
caused the value to not be sign extended and to loose that it was a
negative number in the assignment.

Before the patch (in my freezer),
w1_slave
ed fe 4b 46 7f ff 03 10 e4 : crc=e4 YES
ed fe 4b 46 7f ff 03 10 e4 t=4078
With the patch,
e3 fe 4b 46 7f ff 0d 10 81 : crc=81 YES
e3 fe 4b 46 7f ff 0d 10 81 t=-17

Signed-off-by: David Fries <david@fries.net>
Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agohwmon: (it87) request only Environment Controller ports
Bjorn Helgaas [Tue, 22 Jan 2008 12:21:03 +0000 (07:21 -0500)]
hwmon: (it87) request only Environment Controller ports

The IT8705F and related parts are Super I/O controllers that contain
many separate devices.

Some BIOSes describe IT8705F I/O port usage under a motherboard device
(PNP0C02) with overlapping regions, e.g., 0x290-0x29f and 0x290-0x294.

The it87 driver supports only the Environment Controller, which requires
only two ISA ports, but it used to request an eight-port range.  If that
range exceeds a range reported by the BIOS, as 0x290-0x297 would, the
request fails, and the it87 driver cannot claim the device.

This patch makes the it87 driver request only the two ports used for the
Environment Controller device.

Systems where this problem has been reported:
    Gigabyte GA-K8N Ultra 9
    Gigabyte M56S-S3
    Gigabyte GA-965G-DS3

Kernel bug reports:
    http://bugzilla.kernel.org/show_bug.cgi?id=9514
    http://lkml.org/lkml/2007/12/4/466

Related change:
    http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=a7839e960675b549f06209d18283d5cee2ce9261

    The patch above increases the number of PNP port resources we support.
    Prior to this patch, we ignored some port resources, which masked the
    it87 problem.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
16 years agosched: group scheduler, set uid share fix
Ingo Molnar [Tue, 22 Jan 2008 10:24:58 +0000 (11:24 +0100)]
sched: group scheduler, set uid share fix

setting cpu share to 1 causes hangs, as reported in:

    http://bugzilla.kernel.org/show_bug.cgi?id=9779

as the default share is 1024, the values of 0 and 1 can indeed
cause problems. Limit it to 2 or higher values.

These values can only be set by the root user - but still it
makes sense to protect against nonsensical values.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agoRevert "x86: fix NMI watchdog & 'stopped time' problem"
Thomas Gleixner [Tue, 22 Jan 2008 09:23:01 +0000 (10:23 +0100)]
Revert "x86: fix NMI watchdog & 'stopped time' problem"

This reverts commit d4d25deca49ec2527a634557bf5a6cf449f85deb.

It tried to fix long standing bugzilla entries, but the solution was
reported to break other systems. The reporter of

http://bugzilla.kernel.org/show_bug.cgi?id=9791

tracked it down to this commit and confirmed that reverting the patch
restores the correct behaviour. It's too late in the release cycle to
find a better solution than reverting the commit to avoid regressions.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
16 years agoMakefile: Change typoed 'behavour' to 'behaviour'
Linus Nilsson [Sun, 20 Jan 2008 16:10:01 +0000 (17:10 +0100)]
Makefile: Change typoed 'behavour' to 'behaviour'

Change two occurances of "behavour" to "behaviour".

Signed-off-by: Linus Nilsson <lajnold@acc.umu.se>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Tue, 22 Jan 2008 03:45:49 +0000 (19:45 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
  selinux: fix memory leak in netlabel code

16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Tue, 22 Jan 2008 03:42:25 +0000 (19:42 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  [ICMP]: ICMP_MIB_OUTMSGS increment duplicated
  [IPV6]: RFC 2011 compatibility broken
  [IPV6]: ICMP6_MIB_OUTMSGS increment duplicated
  [NET]: rtnl_link: fix use-after-free
  [AF_KEY]: Fix skb leak on pfkey_send_migrate() error
  [ATM] atm/suni.c: Fix section mismatch.
  [ATM] atm/idt77105.c: Fix section mismatch.
  [IrDA]: af_irda memory leak fixes
  [NEIGH]: Revert 'Fix race between neigh_parms_release and neightbl_fill_parms'
  [NETFILTER]: bridge-netfilter: fix net_device refcnt leaks
  [IPV6] ROUTE: Make sending algorithm more friendly with RFC 4861.
  [IPV4] FIB_HASH : Avoid unecessary loop in fn_hash_dump_zone()
  [NET]: Fix interrupt semaphore corruption in Intel drivers.
  [IPV4] fib_trie: fix duplicated route issue
  [IPV4] fib_hash: fix duplicated route issue
  [IPV6]: Mischecked tw match in __inet6_check_established.
  rfkill: call rfkill_led_trigger_unregister() on error

16 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Tue, 22 Jan 2008 03:40:05 +0000 (19:40 -0800)]
Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  tc35815: Use irq number for tc35815-mac platform device id
  [MIPS] Malta: Fix reading the PCI clock frequency on big-endian
  [MIPS] SMTC: Fix build error.

16 years agoFix filesystem capability support
Andrew G. Morgan [Tue, 22 Jan 2008 01:18:30 +0000 (17:18 -0800)]
Fix filesystem capability support

In linux-2.6.24-rc1, security/commoncap.c:cap_inh_is_capped() was
introduced. It has the exact reverse of its intended behavior. This
led to an unintended privilege esculation involving a process'
inheritable capability set.

To be exposed to this bug, you need to have Filesystem Capabilities
enabled and in use. That is:

- CONFIG_SECURITY_FILE_CAPABILITIES must be defined for the buggy code
  to be compiled in.

- You also need to have files on your system marked with fI bits raised.

Signed-off-by: Andrew G. Morgan <morgan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@akpm@linux-foundation.org>
16 years agos3c2410_fb: fix line length calculation
Stefan Schmidt [Tue, 22 Jan 2008 01:18:27 +0000 (17:18 -0800)]
s3c2410_fb: fix line length calculation

Fix line length calculation. var->width is the size of the display in mm. We
like to use the pixel size.

Without this fix, dynamic (fbset) based resolution and depths changes with
s3c2410_fb don't work at all.

Spotted by john cass <johnpcass@yahoo.com>

Signed-off-by: Stefan Schmidt <stefan@openmoko.org>
Signed-off-by: Harald Welte <laforge@openmoko.org>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Acked-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@akpm@linux-foundation.org>
16 years agoCRIS: add missed local_irq_restore call
Cyrill Gorcunov [Tue, 22 Jan 2008 01:18:26 +0000 (17:18 -0800)]
CRIS: add missed local_irq_restore call

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Mikael Starvik <starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@akpm@linux-foundation.org>
16 years agotimer: fix section mismatch
Randy Dunlap [Tue, 22 Jan 2008 01:18:25 +0000 (17:18 -0800)]
timer: fix section mismatch

The caller is __cpuinit.
Also, this code block and its caller are inside #ifdef CONFIG_HOTPLUG_CPU
blocks, so this code should reflect that config symbol's usage.

WARNING: vmlinux.o(.text+0x4252f): Section mismatch: reference to .init.text: (between 'timer_cpu_notify' and 'msleep')

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@akpm@linux-foundation.org>
16 years agohrtimer: fix section mismatch
Randy Dunlap [Tue, 22 Jan 2008 01:18:24 +0000 (17:18 -0800)]
hrtimer: fix section mismatch

Fix section mismatch in hrtimer.c:

WARNING: vmlinux.o(.text+0x50c61): Section mismatch: reference to .init.text: (between 'hrtimer_cpu_notify' and 'down_read_trylock')

Noticed by Johannes Berg and confirmed by Sam Ravnborg.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@akpm@linux-foundation.org>
16 years agokeyspan: fix oops
Alan Cox [Tue, 22 Jan 2008 01:18:24 +0000 (17:18 -0800)]
keyspan: fix oops

If we get a data URB back from the hardware after we have put the tty to
bed we go kaboom.  Fortunately all we need to do is process the URB without
trying to ram its contents down the throat of an ex-tty.

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@akpm@linux-foundation.org>
16 years agotc35815: Use irq number for tc35815-mac platform device id
Atsushi Nemoto [Fri, 18 Jan 2008 16:15:52 +0000 (01:15 +0900)]
tc35815: Use irq number for tc35815-mac platform device id

The tc35815-mac platform device used a pci bus number and a devfn to
identify its target device, but the pci bus number may vary if some
bus-bridges are found.  Use irq number which is be unique for embedded
controllers.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
16 years ago[MIPS] Malta: Fix reading the PCI clock frequency on big-endian
Dmitri Vorobiev [Mon, 14 Jan 2008 21:27:46 +0000 (00:27 +0300)]
[MIPS] Malta: Fix reading the PCI clock frequency on big-endian

The JMPRS register on Malta boards keeps a 32-bit CPU-endian
value. The readw() function assumes that the value it reads is a
little-endian 16-bit number. Therefore, using readw() to obtain
the value of the JMPRS register is a mistake. This error leads
to incorrect reading of the PCI clock frequency on big-endian
during board start-up.

Change readw() to __raw_readl().

This was tested by injecting a call to printk() and verifying
that the value of the jmpr variable was consistent with current
setting of the JP4 "PCI CLK" jumper.

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
16 years ago[MIPS] SMTC: Fix build error.
Frank Rowand [Tue, 15 Jan 2008 22:26:44 +0000 (14:26 -0800)]
[MIPS] SMTC: Fix build error.

Fix compile warning (which becomes compile error due to -Werror).  Type of
argument "flags" for spin_lock_irqsave() was incorrect in some functions.

Signed-off-by: Frank Rowand <frank.rowand@am.sony.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
16 years agoselinux: fix memory leak in netlabel code
Paul Moore [Mon, 21 Jan 2008 22:31:00 +0000 (09:31 +1100)]
selinux: fix memory leak in netlabel code

Fix a memory leak in security_netlbl_sid_to_secattr() as reported here:
 * https://bugzilla.redhat.com/show_bug.cgi?id=352281

Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: James Morris <jmorris@namei.org>
16 years ago[ICMP]: ICMP_MIB_OUTMSGS increment duplicated
Wang Chen [Mon, 21 Jan 2008 11:39:45 +0000 (03:39 -0800)]
[ICMP]: ICMP_MIB_OUTMSGS increment duplicated

Commit "96793b482540f3a26e2188eaf75cb56b7829d3e3" (Add ICMPMsgStats
MIB (RFC 4293)) made a mistake.

In that patch, David L added a icmp_out_count() in
ip_push_pending_frames(), remove icmp_out_count() from
icmp_reply(). But he forgot to remove icmp_out_count() from
icmp_send() too.  Since icmp_send and icmp_reply will call
icmp_push_reply, which will call ip_push_pending_frames, a duplicated
increment happened in icmp_send.

This patch remove the icmp_out_count from icmp_send too.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPV6]: RFC 2011 compatibility broken
Wang Chen [Mon, 21 Jan 2008 11:05:43 +0000 (03:05 -0800)]
[IPV6]: RFC 2011 compatibility broken

The snmp6 entry name was changed, and it broke compatibility
to RFC 2011.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPV6]: ICMP6_MIB_OUTMSGS increment duplicated
Wang Chen [Mon, 21 Jan 2008 11:04:47 +0000 (03:04 -0800)]
[IPV6]: ICMP6_MIB_OUTMSGS increment duplicated

icmpv6_send() calls ip6_push_pending_frames() indirectly.
Both ip6_push_pending_frames() and icmpv6_send() increment
counter ICMP6_MIB_OUTMSGS.

This patch remove the increment from icmpv6_send.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[NET]: rtnl_link: fix use-after-free
Patrick McHardy [Mon, 21 Jan 2008 01:25:14 +0000 (17:25 -0800)]
[NET]: rtnl_link: fix use-after-free

When unregistering the rtnl_link_ops, all existing devices using
the ops are destroyed. With nested devices this may lead to a
use-after-free despite the use of for_each_netdev_safe() in case
the upper device is next in the device list and is destroyed
by the NETDEV_UNREGISTER notifier.

The easy fix is to restart scanning the device list after removing
a device. Alternatively we could add new devices to the front of
the list to avoid having dependant devices follow the device they
depend on. A third option would be to only restart scanning if
dev->iflink of the next device matches dev->ifindex of the current
one. For now this seems like the safest solution.

With this patch, the veth rtnl_link_ops unregistration can use
rtnl_link_unregister() directly since it now also handles destruction
of multiple devices at once.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[AF_KEY]: Fix skb leak on pfkey_send_migrate() error
Patrick McHardy [Mon, 21 Jan 2008 01:24:29 +0000 (17:24 -0800)]
[AF_KEY]: Fix skb leak on pfkey_send_migrate() error

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[ATM] atm/suni.c: Fix section mismatch.
Adrian Bunk [Mon, 21 Jan 2008 01:23:12 +0000 (17:23 -0800)]
[ATM] atm/suni.c: Fix section mismatch.

EXPORT_SYMBOL'ed code mustn't be __*init.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[ATM] atm/idt77105.c: Fix section mismatch.
Adrian Bunk [Mon, 21 Jan 2008 01:22:28 +0000 (17:22 -0800)]
[ATM] atm/idt77105.c: Fix section mismatch.

EXPORT_SYMBOL'ed code mustn't be __*init.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IrDA]: af_irda memory leak fixes
Jesper Juhl [Mon, 21 Jan 2008 00:58:04 +0000 (16:58 -0800)]
[IrDA]: af_irda memory leak fixes

Here goes an IrDA patch against your latest net-2.6 tree.

This patch fixes some af_irda memory leaks.  It also checks for
irias_new_obect() return value.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[NEIGH]: Revert 'Fix race between neigh_parms_release and neightbl_fill_parms'
David S. Miller [Mon, 21 Jan 2008 00:39:03 +0000 (16:39 -0800)]
[NEIGH]: Revert 'Fix race between neigh_parms_release and neightbl_fill_parms'

Commit 9cd40029423701c376391da59d2c6469672b4bed (Fix race between
neigh_parms_release and neightbl_fill_parms) introduced device
reference counting regressions for several people, see:

http://bugzilla.kernel.org/show_bug.cgi?id=9778

for example.

Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[NETFILTER]: bridge-netfilter: fix net_device refcnt leaks
Patrick McHardy [Sun, 20 Jan 2008 14:25:48 +0000 (06:25 -0800)]
[NETFILTER]: bridge-netfilter: fix net_device refcnt leaks

When packets are flood-forwarded to multiple output devices, the
bridge-netfilter code reuses skb->nf_bridge for each clone to store
the bridge port. When queueing packets using NFQUEUE netfilter takes
a reference to skb->nf_bridge->physoutdev, which is overwritten
when the packet is forwarded to the second port. This causes
refcount unterflows for the first device and refcount leaks for all
others. Additionally this provides incorrect data to the iptables
physdev match.

Unshare skb->nf_bridge by copying it if it is shared before assigning
the physoutdev device.

Reported, tested and based on initial patch by
Jan Christoph Nordholz <hesso@pool.math.tu-berlin.de>.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPV6] ROUTE: Make sending algorithm more friendly with RFC 4861.
YOSHIFUJI Hideaki [Sat, 19 Jan 2008 08:35:16 +0000 (00:35 -0800)]
[IPV6] ROUTE: Make sending algorithm more friendly with RFC 4861.

We omit (or delay) sending NSes for known-to-unreachable routers (in
NUD_FAILED state) according to RFC 4191 (Default Router Preferences
and More-Specific Routes).  But this is not fully compatible with RFC
4861 (Neighbor Discovery Protocol for IPv6), which does not remember
unreachability of neighbors.

So, let's avoid mixing sending algorithm of RFC 4191 and that of RFC
4861, and make the algorithm more friendly with RFC 4861 if RFC 4191
is disabled.

Issue was found by IPv6 Ready Logo Core Self_Test 1.5.0b2 (by TAHI
Project), and has been tracked down by Mitsuru Chinen
<mitch@linux.vnet.ibm.com>.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPV4] FIB_HASH : Avoid unecessary loop in fn_hash_dump_zone()
Eric Dumazet [Fri, 18 Jan 2008 12:30:21 +0000 (04:30 -0800)]
[IPV4] FIB_HASH : Avoid unecessary loop in fn_hash_dump_zone()

I noticed "ip route list" was slower than "cat /proc/net/route" on a
machine with a full Internet routing table (214392 entries : Special
thanks to Robert ;) )

This is similar to problem reported in commit
d8c9283089287341c85a0a69de32c2287a990e71 ("[IPV4] ROUTE: ip_rt_dump()
is unecessary slow")

Fix is to avoid scanning the begining of fz_hash table, but directly
seek to the right offset.

Before patch :

time ip route >/tmp/ROUTE

real    0m1.285s
user    0m0.712s
sys     0m0.436s

After patch

# time ip route >/tmp/ROUTE

real    0m0.835s
user    0m0.692s
sys     0m0.124s

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[NET]: Fix interrupt semaphore corruption in Intel drivers.
David S. Miller [Fri, 18 Jan 2008 12:21:39 +0000 (04:21 -0800)]
[NET]: Fix interrupt semaphore corruption in Intel drivers.

Several of the Intel ethernet drivers keep an atomic counter used to
manage when to actually hit the hardware with a disable or an enable.

The way the net_rx_work() breakout logic works during a pending
napi_disable() is that it simply unschedules the poll even if it
still has work.

This can potentially leave interrupts disabled, but that is OK
because all of the drivers are about to disable interrupts
anyways in all such code paths that do a napi_disable().

Unfortunately, this trips up the semaphore used here in the Intel
drivers.  If you hit this case, when you try to bring the interface
back up it won't enable interrupts.  A reload of the driver module
fixes it of course.

So what we do is make sure all the sequences now go:

napi_disable();
atomic_set(&adapter->irq_sem, 0);
*_irq_disable();

which makes sure the counter is always in the correct state.

Reported by Robert Olsson.

Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPV4] fib_trie: fix duplicated route issue
Joonwoo Park [Fri, 18 Jan 2008 11:45:18 +0000 (03:45 -0800)]
[IPV4] fib_trie: fix duplicated route issue

http://bugzilla.kernel.org/show_bug.cgi?id=9493

The fib allows making identical routes with 'ip route replace'.
This patch makes the fib return -EEXIST if replacement would cause duplication.

Signed-off-by: Joonwoo Park <joonwpark81@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPV4] fib_hash: fix duplicated route issue
Joonwoo Park [Fri, 18 Jan 2008 11:44:48 +0000 (03:44 -0800)]
[IPV4] fib_hash: fix duplicated route issue

http://bugzilla.kernel.org/show_bug.cgi?id=9493

The fib allows making identical routes with 'ip route replace'.
This patch makes the fib return -EEXIST if replacement would cause duplication.

Signed-off-by: Joonwoo Park <joonwpark81@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPV6]: Mischecked tw match in __inet6_check_established.
Pavel Emelyanov [Fri, 18 Jan 2008 11:27:12 +0000 (03:27 -0800)]
[IPV6]: Mischecked tw match in __inet6_check_established.

When looking for a conflicting connection the !sk->sk_bound_dev_if
check is performed only for live sockets, but not for timewait-ed.

This is not the case for ipv4, for __inet6_lookup_established in
both ipv4 and ipv6 and for other places that check for tw-s.

Was this missed accidentally? If so, then this patch fixes it and
besides makes use if the dif variable declared in the function.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agorfkill: call rfkill_led_trigger_unregister() on error
Eric Paris [Sun, 13 Jan 2008 21:20:56 +0000 (16:20 -0500)]
rfkill: call rfkill_led_trigger_unregister() on error

Code inspection turned up that error cases in rfkill_register() do not
call rfkill_led_trigger_unregister() even though we have already
registered.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoMerge branch 'omap-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind...
Russell King [Sun, 20 Jan 2008 10:18:12 +0000 (10:18 +0000)]
Merge branch 'omap-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  ARM: OMAP1: Fix compile for board-nokia770
  ARM: OMAP1: Keymap fix for f-sample and p2-sample

16 years ago[ARM] 4748/1: dca: source drivers/dca/Kconfig in arch/arm/Kconfig to fix warning
Dan Williams [Fri, 18 Jan 2008 22:26:10 +0000 (23:26 +0100)]
[ARM] 4748/1: dca: source drivers/dca/Kconfig in arch/arm/Kconfig to fix warning

'select' used by config symbol 'INTEL_IOATDMA' refers to undefined symbol 'DCA'

Although drivers/dma is currently the only user future drivers outside of
drivers/dma may select this option so it is better to add this to
arch/arm/Kconfig than move DCA to drivers/dma/Kconfig.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] pxa: don't rely on r2 being preserved over a function call
Russell King [Fri, 11 Jan 2008 12:23:58 +0000 (12:23 +0000)]
[ARM] pxa: don't rely on r2 being preserved over a function call

r2 is not guaranteed to be preserved over a function call, so relying
on it to store the link register over the call to sleep_phys_sp() is
unreliable.  Store the link register on the stack instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years agoRemove bogus duplicate CONFIG_LGUEST_GUEST entry.
Rusty Russell [Sun, 20 Jan 2008 00:54:18 +0000 (11:54 +1100)]
Remove bogus duplicate CONFIG_LGUEST_GUEST entry.

It was moved to arch/x86/lguest/Kconfig, but I lost the deletion part in a
patch suffle.  My confused one-liner "fix" to turn it on is also reverted:
84f7466ee20cc094aa38617abfa2f3834871f054

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoarch: Ignore arch/i386 and arch/x86_64
Josef 'Jeff' Sipek [Sat, 19 Jan 2008 21:04:42 +0000 (16:04 -0500)]
arch: Ignore arch/i386 and arch/x86_64

The i386 and x86_64 arch directories contain nothing but a generated symlink
to arch/x86/boot/bzImage when a tree a built.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Anvin <hpa@zytor.com>
Signed-off-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agopata_pdc202xx_old: Fix crashes with ATAPI
Alan Cox [Sat, 19 Jan 2008 15:51:26 +0000 (15:51 +0000)]
pata_pdc202xx_old: Fix crashes with ATAPI

The PDC202xx older devices do not support ATAPI DMA via the usual
interfaces. What documentation I have isn't sufficient to support DMA and
it isn't clear if the Windows drivers do this or it is possible at all.
(Neither do the drivers/ide old drivers)

So turn it ATAPI DMA off, these are disk optimised controllers.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland...
Linus Torvalds [Sat, 19 Jan 2008 19:01:23 +0000 (11:01 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/ipath: Fix receiving UD messages with immediate data

16 years agoARM: OMAP1: Fix compile for board-nokia770
Daniel Walker [Sat, 19 Jan 2008 01:55:08 +0000 (17:55 -0800)]
ARM: OMAP1: Fix compile for board-nokia770

Fix compile for board-nokia770

Signed-off-by: Daniel Walker <dwalker@mvista.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
16 years agoARM: OMAP1: Keymap fix for f-sample and p2-sample
Vivek Kutal [Mon, 7 Jan 2008 14:04:00 +0000 (12:04 -0200)]
ARM: OMAP1: Keymap fix for f-sample and p2-sample

Keymap fix for f-sample and p2-sample.

Signed-off-by: Vivek Kutal <vivek.kutal@celunite.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
16 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzi...
Linus Torvalds [Fri, 18 Jan 2008 22:06:44 +0000 (14:06 -0800)]
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (31 commits)
  Replace cpmac fix
  dl2k: the rest
  dl2k: MSCR, MSSR, ESR, PHY_SCR fixes
  dl2k: BMSR fixes
  dl2k: ANAR, ANLPAR fixes
  dl2k: BMCR_t fixes
  3c574, 3c515 bitfields abuse
  sbni endian fixes
  wan/lmc bitfields fixes
  dscc4 endian fixes
  S2io: Fixed synchronization between scheduling of napi with card reset and close
  atl1: fix frame length bug
  Documentation: add a guideline for hard_start_xmit method
  Revert "sky2: remove check for PCI wakeup setting from BIOS"
  e1000e Kconfig: remove ref to nonexistant docs
  bonding: Don't hold lock when calling rtnl_unlock
  bonding: fix lock ordering for rtnl and bonding_rwsem
  bonding: Fix up parameter parsing
  bonding: release slaves when master removed via sysfs
  bonding: fix locking during alb failover and slave removal
  ...

16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
Linus Torvalds [Fri, 18 Jan 2008 22:06:19 +0000 (14:06 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] clarify watchdog operation in documentation
  [WATCHDOG] Revert "Stop looking for device as soon as one is found"