]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/log
linux-2.6-omap-h63xx.git
16 years agox86: remove explicit C3 TSC check on 64bit
Andi Kleen [Wed, 30 Jan 2008 12:32:41 +0000 (13:32 +0100)]
x86: remove explicit C3 TSC check on 64bit

Trust the ACPI code to disable TSC instead when C3 is used.

AMD Fam10h does not disable TSC in any C states so the
check was incorrect there anyways after the change
to handle this like Intel on AMD too.

This allows to use the TSC when C3 is disabled in software
(acpi.max_c_state=2), but the BIOS supports it anyways.

Match i386 behaviour.

Cc: lenb@kernel.org
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: allow TSC clock source on AMD Fam10h and some cleanup
Andi Kleen [Wed, 30 Jan 2008 12:32:40 +0000 (13:32 +0100)]
x86: allow TSC clock source on AMD Fam10h and some cleanup

After a lot of discussions with AMD it turns out that TSC
on Fam10h CPUs is synchronized when the CONSTANT_TSC cpuid bit is set.
Or rather that if there are ever systems where that is not
true it would be their BIOS' task to disable the bit.

So finally use TSC gettimeofday on Fam10h by default.

Or rather it is always used now on CPUs where the AMD
specific CONSTANT_TSC bit is set.

This gives a nice speed bost for gettimeofday() on these systems
which tends to be by far the most common v/syscall.

On a Fam10h system here TSC gtod uses about 20% of the CPU time of
acpi_pm based gtod(). This was measured on 32bit, on 64bit
it is even better because TSC gtod() can use a vsyscall
and stay in ring 3, which acpi_pm doesn't.

The Intel check simply checks for CONSTANT_TSC too without hardcoding
Intel vendor. This is equivalent on 64bit because all 64bit capable Intel
CPUs will have CONSTANT_TSC set.

On Intel there is no CPU supplied CONSTANT_TSC bit currently,
but we synthesize one based on hardcoded knowledge which steppings
have p-state invariant TSC.

So the new logic is now: On CPUs which have the AMD specific
CONSTANT_TSC bit set or on Intel CPUs which are new enough
to be known to have p-state invariant TSC always use
TSC based gettimeofday()

Cc: lenb@kernel.org
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: move X86_FEATURE_CONSTANT_TSC into early cpu feature detection
Andi Kleen [Wed, 30 Jan 2008 12:32:40 +0000 (13:32 +0100)]
x86: move X86_FEATURE_CONSTANT_TSC into early cpu feature detection

Need this in the next patch in time_init and that happens early.

This includes a minor fix on i386 where early_intel_workarounds()
[which is now called early_init_intel] really executes early as
the comments say.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: remove the now unused X86_FEATURE_SYNC_RDTSC
Andi Kleen [Wed, 30 Jan 2008 12:32:40 +0000 (13:32 +0100)]
x86: remove the now unused X86_FEATURE_SYNC_RDTSC

we need to know whether RDTSC is synchronous or not.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: fix sched_clock()
Ingo Molnar [Wed, 30 Jan 2008 12:32:40 +0000 (13:32 +0100)]
x86: fix sched_clock()

[ andi@firstfloor.org: build fix ]

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: remove get_cycles_sync
Andi Kleen [Wed, 30 Jan 2008 12:32:39 +0000 (13:32 +0100)]
x86: remove get_cycles_sync

rdtsc is now speculation-safe, so no need for the sync variants of
the APIs.

[ mingo@elte.hu: removed the nsec_barrier() complication. ]

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: read_tsc sync
Ingo Molnar [Wed, 30 Jan 2008 12:32:39 +0000 (13:32 +0100)]
x86: read_tsc sync

make native_read_tsc() always non-speculative.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: map vsyscalls early enough
Ingo Molnar [Wed, 30 Jan 2008 12:32:39 +0000 (13:32 +0100)]
x86: map vsyscalls early enough

map vsyscalls early enough. This is important if a __vsyscall_fn
function is used by other kernel code too.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: move native_read_tsc() offline
Ingo Molnar [Wed, 30 Jan 2008 12:32:39 +0000 (13:32 +0100)]
x86: move native_read_tsc() offline

move native_read_tsc() offline.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: introduce rdtsc_barrier()
Andi Kleen [Wed, 30 Jan 2008 12:32:38 +0000 (13:32 +0100)]
x86: introduce rdtsc_barrier()

rdtsc_barrier() is a new barrier primitive that stops RDTSC speculation
to avoid races with timer interrupts on other CPUs.

It expands either to LFENCE (for Intel CPUs) or MFENCE (for
AMD CPUs) which stops RDTSC on all currently known microarchitectures
that implement SSE. On CPUs without SSE there is generally no RDTSC
speculation.

[ mingo@elte.hu: renamed it to rdtsc_barrier() and made it x86-only ]

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agogit-x86: unbreak UML
WANG Cong [Wed, 30 Jan 2008 12:32:38 +0000 (13:32 +0100)]
git-x86: unbreak UML

Acked-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: move nop declarations into separate include file
Andi Kleen [Wed, 30 Jan 2008 12:32:38 +0000 (13:32 +0100)]
x86: move nop declarations into separate include file

Moving things out of processor.h is always a good thing.

Also needed to avoid include loop in later patch.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: lfence fix
Ingo Molnar [Wed, 30 Jan 2008 12:32:38 +0000 (13:32 +0100)]
x86: lfence fix

LFENCE is available on XMM2 or higher Intel CPUs - not XMM or higher...

this caused boot failures on XMM1 & !XMM1 capable CPUs.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: Implement support to synchronize RDTSC with LFENCE on Intel CPUs
Andi Kleen [Wed, 30 Jan 2008 12:32:37 +0000 (13:32 +0100)]
x86: Implement support to synchronize RDTSC with LFENCE on Intel CPUs

According to Intel RDTSC can be always synchronized with LFENCE
on all current CPUs. Implement the necessary CPUID bit for that.

It is unclear yet if that is true for all future CPUs too,
but if there's another way the kernel can be always updated.

Cc: asit.k.mallick@intel.com
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: implement support to synchronize RDTSC through MFENCE on AMD CPUs
Andi Kleen [Wed, 30 Jan 2008 12:32:37 +0000 (13:32 +0100)]
x86: implement support to synchronize RDTSC through MFENCE on AMD CPUs

According to AMD RDTSC can be synchronized through MFENCE.
Implement the necessary CPUID bit for that.

Cc: andreas.herrmann3@amd.com
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: make ptrace.h safe to include from assembler code
Andi Kleen [Wed, 30 Jan 2008 12:32:36 +0000 (13:32 +0100)]
x86: make ptrace.h safe to include from assembler code

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: clean up k8topology.c
Carlos R. Mafra [Wed, 30 Jan 2008 12:32:36 +0000 (13:32 +0100)]
x86: clean up k8topology.c

This patch fixes all errors pointed out by checkpatch.pl.

                                      errors   lines of code   errors/KLOC
arch/x86/mm/k8topology_64.c (before)      72             185         389.1
arch/x86/mm/k8topology_64.c (after)        0             185             0

No code changed.

   text    data     bss     dec     hex filename
   1506       0       0    1506     5e2 k8topology_64.o.after
   1506       0       0    1506     5e2 k8topology_64.o.before

md5sum:

   f9f48331a7eca4fc60d2a03369dc5f53  k8topology_64.o.after
   f9f48331a7eca4fc60d2a03369dc5f53  k8topology_64.o.before

Signed-off-by: Carlos R. Mafra <crmafra@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: clean up apic_32.c, take 2
Hiroshi Shimamoto [Wed, 30 Jan 2008 12:32:36 +0000 (13:32 +0100)]
x86: clean up apic_32.c, take 2

More white space and coding style clean up.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: debug: double-check the empty zero page
Ingo Molnar [Wed, 30 Jan 2008 12:32:36 +0000 (13:32 +0100)]
x86: debug: double-check the empty zero page

temporary debugging - remove before this hits v2.6.25.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: not clear empty_zero_page again
Yinghai Lu [Wed, 30 Jan 2008 12:32:36 +0000 (13:32 +0100)]
x86: not clear empty_zero_page again

empty_zero_page is in .bss section, and it is cleared in clear_bss by
x86_64_start_kernel(). So don't clear that again in mem_init

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: clean up apic_32/64.c
Hiroshi Shimamoto [Wed, 30 Jan 2008 12:32:35 +0000 (13:32 +0100)]
x86: clean up apic_32/64.c

White space and coding style clean up.
Make apic_32/64.c similar.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: introduce force_sig_info_fault helper to X86_64
Harvey Harrison [Wed, 30 Jan 2008 12:32:35 +0000 (13:32 +0100)]
x86: introduce force_sig_info_fault helper to X86_64

Use the force_sig_info_fault helper from X86_32 in X86_64.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: begin fault_{32|64}.c unification
Harvey Harrison [Wed, 30 Jan 2008 12:32:35 +0000 (13:32 +0100)]
x86: begin fault_{32|64}.c unification

Move X86_32 only get_segment_eip to X86_64
Move X86_64 only is_errata93 to X86_32

Change X86_32 loop in is_prefetch to highlight the differences
between them.  Fold the logic from __is_prefetch in as well on
X86_32.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: fault_32.c cleanup
Harvey Harrison [Wed, 30 Jan 2008 12:32:34 +0000 (13:32 +0100)]
x86: fault_32.c cleanup

We get die() from kdebug.h, no need for forward declaration.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: fix style errors in nmi_int.c
Carlos R. Mafra [Wed, 30 Jan 2008 12:32:33 +0000 (13:32 +0100)]
x86: fix style errors in nmi_int.c

This patch fixes most errors detected by checkpatch.pl.

                                     errors   lines of code   errors/KLOC
arch/x86/oprofile/nmi_int.c (after)       1             461           2.1
arch/x86/oprofile/nmi_int.c (before)     60             477         125.7

No code changed.

size:
   text    data     bss     dec     hex filename
   2675     264     472    3411     d53 nmi_int.o.after
   2675     264     472    3411     d53 nmi_int.o.before

md5sum:
  847aea0cc68fe1a2b5e7019439f3b4dd  nmi_int.o.after
  847aea0cc68fe1a2b5e7019439f3b4dd  nmi_int.o.before

Signed-off-by: Carlos R. Mafra <crmafra@gmail.com>
Reviewed-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: code clarification patch to Kprobes arch code
Quentin Barnes [Wed, 30 Jan 2008 12:32:32 +0000 (13:32 +0100)]
x86: code clarification patch to Kprobes arch code

When developing the Kprobes arch code for ARM, I ran across some code
found in x86 and s390 Kprobes arch code which I didn't consider as
good as it could be.

Once I figured out what the code was doing, I changed the code
for ARM Kprobes to work the way I felt was more appropriate.
I've tested the code this way in ARM for about a year and would
like to push the same change to the other affected architectures.

The code in question is in kprobe_exceptions_notify() which
does:
====
          /* kprobe_running() needs smp_processor_id() */
          preempt_disable();
          if (kprobe_running() &&
              kprobe_fault_handler(args->regs, args->trapnr))
                  ret = NOTIFY_STOP;
          preempt_enable();
====

For the moment, ignore the code having the preempt_disable()/
preempt_enable() pair in it.

The problem is that kprobe_running() needs to call smp_processor_id()
which will assert if preemption is enabled.  That sanity check by
smp_processor_id() makes perfect sense since calling it with preemption
enabled would return an unreliable result.

But the function kprobe_exceptions_notify() can be called from a
context where preemption could be enabled.  If that happens, the
assertion in smp_processor_id() happens and we're dead.  So what
the original author did (speculation on my part!) is put in the
preempt_disable()/preempt_enable() pair to simply defeat the check.

Once I figured out what was going on, I considered this an
inappropriate approach.  If kprobe_exceptions_notify() is called
from a preemptible context, we can't be in a kprobe processing
context at that time anyways since kprobes requires preemption to
already be disabled, so just check for preemption enabled, and if
so, blow out before ever calling kprobe_running().  I wrote the ARM
kprobe code like this:
====
          /* To be potentially processing a kprobe fault and to
           * trust the result from kprobe_running(), we have
           * be non-preemptible. */
          if (!preemptible() && kprobe_running() &&
              kprobe_fault_handler(args->regs, args->trapnr))
                  ret = NOTIFY_STOP;
====

The above code has been working fine for ARM Kprobes for a year.
So I changed the x86 code (2.6.24-rc6) to be the same way and ran
the Systemtap tests on that kernel.  As on ARM, Systemtap on x86
comes up with the same test results either way, so it's a neutral
external functional change (as expected).

This issue has been discussed previously on linux-arm-kernel and the
Systemtap mailing lists.  Pointers to the by base for the two
discussions:
http://lists.arm.linux.org.uk/lurker/message/20071219.223225.1f5c2a5e.en.html
http://sourceware.org/ml/systemtap/2007-q1/msg00251.html

Signed-off-by: Quentin Barnes <qbarnes@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Ananth N Mavinakayahanalli <ananth@in.ibm.com>
Acked-by: Ananth N Mavinakayahanalli <ananth@in.ibm.com>
16 years agox86: get rid of checkpatch.pl complains on apm_32.c
Cyrill Gorcunov [Wed, 30 Jan 2008 12:32:32 +0000 (13:32 +0100)]
x86: get rid of checkpatch.pl complains on apm_32.c

This patch eliminates most of code-style errors
discovered by checkpatch.pl on arch/x86/kernel/apm_32.c

no code changed:

      text    data     bss     dec     hex filename
     12142    1837      84   14063    36ef apm_32.o.before
     12142    1837      84   14063    36ef apm_32.o.after

   md5:
       2676b881ad55e387da4a995e8b9ee372  apm_32.o.before.asm
       2676b881ad55e387da4a995e8b9ee372  apm_32.o.after.asm

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: default to PCI=y
Adrian Bunk [Wed, 30 Jan 2008 12:32:32 +0000 (13:32 +0100)]
x86: default to PCI=y

PCI is one of the few hardware stuff where defaulting to y makes sense.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: gitignore arch/x86/vdso files
Sam Ravnborg [Wed, 30 Jan 2008 12:32:32 +0000 (13:32 +0100)]
x86: gitignore arch/x86/vdso files

Teach git to ignore generated files in
arch/x86/vdso/*

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roland McGrath <roland@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: coding style cleanup for kernel/bootflag.c
Cyrill Gorcunov [Wed, 30 Jan 2008 12:32:31 +0000 (13:32 +0100)]
x86: coding style cleanup for kernel/bootflag.c

This patch eliminates checkpatch.pl complaints on bootflag.c

No code changed:

   text    data     bss     dec     hex filename
    321       8       0     329     149 bootflag.o.before
    321       8       0     329     149 bootflag.o.after

   md5:
      9c1b474bcf25ddc1724a29c19880043f  bootflag.o.before.asm
      9c1b474bcf25ddc1724a29c19880043f  bootflag.o.after.asm

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: hlt on early crash
Ingo Molnar [Wed, 30 Jan 2008 12:32:31 +0000 (13:32 +0100)]
x86: hlt on early crash

H. Peter Anvin <hpa@zytor.com> wrote:

> It probably should actually HLT, to avoid sucking power, and stressing
> the thermal system.  We're dead at this point, and the early 486's
> which had problems with HLT will lock up - we don't care.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agogit-x86: drivers/pnp/pnpbios/bioscalls.c build fix
Andrew Morton [Wed, 30 Jan 2008 12:32:31 +0000 (13:32 +0100)]
git-x86: drivers/pnp/pnpbios/bioscalls.c build fix

drivers/pnp/pnpbios/bioscalls.c:64: warning: (near initialization for 'bad_bios_desc.<anonymous>')

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: reduce CONFIG_X86_PPRO_FENCE bloat
Nick Piggin [Wed, 30 Jan 2008 12:32:31 +0000 (13:32 +0100)]
x86: reduce CONFIG_X86_PPRO_FENCE bloat

CONFIG_X86_PPRO_FENCE bloats text:

i386 allmodconf: size mm/built-in.o
           text    data     bss     dec     hex         text ratio
vanilla: 163082   20372   40120  223574   36956          100.00%
bugfix : 163509   20372   40120  224001   36b01            0.26%
noppro : 162191   20372   40120  222683   365db         -  0.55%
both   : 162267   20372   40120  222759   36627         -  0.50% (+0.05% vs noppro)

So with the ppro memory ordering bug out of the way, the PG_uptodate fix
only adds 76 bytes of text.

allow this config to be specified by distros.

[ mingo@elte.hu: x86.git merge ]

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: unify arch/x86/lib/Makefile(s)
Sam Ravnborg [Wed, 30 Jan 2008 12:32:31 +0000 (13:32 +0100)]
x86: unify arch/x86/lib/Makefile(s)

Trivial unification of Makefiles for the
x86 specific library part.
Linking order is slightly modified but should be harmless.

Tested doing a defconfig build before and after and saw
no build changes.

It adds almost as many lines as it deletes - bacause
I broke a few lines up fo readability in the Makefile.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: unify arch/x86/boot/compressed/Makefile(s)
Sam Ravnborg [Wed, 30 Jan 2008 12:32:30 +0000 (13:32 +0100)]
x86: unify arch/x86/boot/compressed/Makefile(s)

Trivial unification of the two Makefiles.
Tested doing a defconfig build for both 32 and 64 bit and
no build changes occured.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: unify arch/x86/kernel/Makefile(s)
Sam Ravnborg [Wed, 30 Jan 2008 12:32:27 +0000 (13:32 +0100)]
x86: unify arch/x86/kernel/Makefile(s)

Combine the 32 and 64 bit specific Makefiles in one file.
While doing so link order was (almost) preserved on 32 bit
but on 64 bit link order changed a lot.

Patch was checked with defconfig + allyesconfig builds.
The same .o files were linked in these configurations.

To keep readability of the Makefiles a few Kconfig
symbols was added/modified and it was checked that
they were not used anywhere else.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: teach vdso to clean
Sam Ravnborg [Wed, 30 Jan 2008 12:32:27 +0000 (13:32 +0100)]
x86: teach vdso to clean

A few files remained after 'make clean' in arch/x86/vdso/.
Teach vdso to clean up those files in a bit brutal fashion.
The filenames are just hardcoded in the Makefile.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roland McGrath <roland@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: biarch support for 32 bit builds beautified
Sam Ravnborg [Wed, 30 Jan 2008 12:32:23 +0000 (13:32 +0100)]
x86: biarch support for 32 bit builds beautified

There were no reason to mess around with CC, AS and LD.
Fixing this up avoided duplicated option for ld.

A small fixlet were needed in boot/Makefile which assumed
that CC were modified.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: share more options between 32 and 64 bit build
Sam Ravnborg [Wed, 30 Jan 2008 12:32:21 +0000 (13:32 +0100)]
x86: share more options between 32 and 64 bit build

On recommendation from Andi Kleen share a few more options
between 32 and 64 bit builds.
A defconfig build for i386 did not show any difference in
size of text and data.

The additional shared options are:
-Wno-sign-compare
-fno-asynchronous-unwind-tables
-mno-sse
-mno-mmx
-mno-sse2
-mno-3dnow

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: unification of arch/x86/Makefiles
Sam Ravnborg [Wed, 30 Jan 2008 12:32:20 +0000 (13:32 +0100)]
x86: unification of arch/x86/Makefiles

Unify the 32 and 64 bit specific Makefiles.
The unification was simplest to do in one step although the
readability of the patch suffers a bit from this.

Noteworthy remarks on the unification:
- The 64 bit cpu stuff should be moved to Makefile_32.cpu
  but I did not feel confident doing it due to subtle differences
- The use of cflags-y were abandoned since we have seen one bug where
  we did wrong due to missing assignment to KBUILD_CFLAGS.
  The cc-option marcro uses KBUILD_CFLAGS.
- The "No need to remake" line are deleted. It caused "make -B" to fail
- For 64 bit the sub architecture stuff is not used.
- The way head64.o is specified could be nicer - but it awaits the
  introduction of head32.o (which seems like a win to introduce for readability)
- Patch is checkpatch clean

Patch is tested by doing a defconfig build for i386 and x86_64 and in both
cases monitoring that only relevant files were recompiled when applying
the patch.

[ mingo@elte.hu: build fix ]

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: kprobes change kprobe_handler flow
Harvey Harrison [Wed, 30 Jan 2008 12:32:19 +0000 (13:32 +0100)]
x86: kprobes change kprobe_handler flow

Make the control flow of kprobe_handler more obvious.

Collapse the separate if blocks/gotos with if/else blocks
this unifies the duplication of the check for a breakpoint
instruction race with another cpu.

Create two jump targets:
preempt_out: re-enables preemption before returning ret
out: only returns ret

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: cosmetic fixes fault_{32|64}.c
Harvey Harrison [Wed, 30 Jan 2008 12:32:19 +0000 (13:32 +0100)]
x86: cosmetic fixes fault_{32|64}.c

First step towards unifying these files.
- Checkpatch trailing whitespace fixes
- Checkpatch indentation of switch statement fixes
- Checkpatch single statement ifs need no braces fixes
- Checkpatch consistent spacing after comma fixes
- Introduce defines for pagefault error bits from X86_64 and add useful
  comment from X86_32.  Use these defines in X86_32 where obvious.
- Unify comments between 32|64 bit
- Small ifdef movement for CONFIG_KPROBES in notify_page_fault()
- Introduce X86_64 only case statement

No Functional Changes.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agoarch/x86/kernel/io_apic_{64,32}.c: use time_before
Julia Lawall [Wed, 30 Jan 2008 12:32:19 +0000 (13:32 +0100)]
arch/x86/kernel/io_apic_{64,32}.c: use time_before

The functions time_before, time_before_eq, time_after, and time_after_eq
are more robust for comparing jiffies against other values.

A simplified version of the semantic patch making this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@ change_compare_np @
expression E;
@@

(
- jiffies <= E
+ time_before_eq(jiffies,E)
|
- jiffies >= E
+ time_after_eq(jiffies,E)
|
- jiffies < E
+ time_before(jiffies,E)
|
- jiffies > E
+ time_after(jiffies,E)
)

@ include depends on change_compare_np @
@@

#include <linux/jiffies.h>

@ no_include depends on !include && change_compare_np @
@@

  #include <linux/...>
+ #include <linux/jiffies.h>
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agoarch/x86/kernel/apm_32.c: use time_before, time_before_eq,
Julia Lawall [Wed, 30 Jan 2008 12:32:18 +0000 (13:32 +0100)]
arch/x86/kernel/apm_32.c: use time_before, time_before_eq,

The functions time_before, time_before_eq, time_after, and time_after_eq
are more robust for comparing jiffies against other values.

A simplified version of the semantic patch making this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@ change_compare_np @
expression E;
@@

(
- jiffies <= E
+ time_before_eq(jiffies,E)
|
- jiffies >= E
+ time_after_eq(jiffies,E)
|
- jiffies < E
+ time_before(jiffies,E)
|
- jiffies > E
+ time_after(jiffies,E)
)

@ include depends on change_compare_np @
@@

#include <linux/jiffies.h>

@ no_include depends on !include && change_compare_np @
@@

  #include <linux/...>
+ #include <linux/jiffies.h>
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agoarch/x86/ia32: use time_before, time_before_eq, etc.
Julia Lawall [Wed, 30 Jan 2008 12:32:17 +0000 (13:32 +0100)]
arch/x86/ia32: use time_before, time_before_eq, etc.

The functions time_before, time_before_eq, time_after, and time_after_eq
are more robust for comparing jiffies against other values.

A simplified version of the semantic patch making this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@ change_compare_np @
expression E;
@@

(
- jiffies <= E
+ time_before_eq(jiffies,E)
|
- jiffies >= E
+ time_after_eq(jiffies,E)
|
- jiffies < E
+ time_before(jiffies,E)
|
- jiffies > E
+ time_after(jiffies,E)
)

@ include depends on change_compare_np @
@@

#include <linux/jiffies.h>

@ no_include depends on !include && change_compare_np @
@@

  #include <linux/...>
+ #include <linux/jiffies.h>
// </smpl>

[ mingo@elte.hu: merge to x86.git ]

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: kprobes remove fix_riprel #ifdef
Harvey Harrison [Wed, 30 Jan 2008 12:32:16 +0000 (13:32 +0100)]
x86: kprobes remove fix_riprel #ifdef

Move #ifdef around function definiton into the function and
unconditionally return on X86_32.  Saves an ifdef from the
one callsite.

[ mingo@elte.hu: minor cleanup. ]

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: introduce REX prefix helper for kprobes
Harvey Harrison [Wed, 30 Jan 2008 12:32:14 +0000 (13:32 +0100)]
x86: introduce REX prefix helper for kprobes

Fold some small ifdefs into a helper function.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: arch/x86/math-emu/errors.c: fix printk warnings
Andrew Morton [Wed, 30 Jan 2008 12:32:13 +0000 (13:32 +0100)]
x86: arch/x86/math-emu/errors.c: fix printk warnings

arch/x86/math-emu/errors.c:163: warning: format '%ld' expects type 'long int', but argument 3 has type 'u32'
arch/x86/math-emu/errors.c:175: warning: format '%ld' expects type 'long int', but argument 3 has type 'u32'
arch/x86/math-emu/errors.c:175: warning: format '%ld' expects type 'long int', but argument 4 has type 'u32'
arch/x86/math-emu/errors.c:175: warning: format '%ld' expects type 'long int', but argument 5 has type 'u32'
arch/x86/math-emu/errors.c:175: warning: format '%ld' expects type 'long int', but argument 6 has type 'u32'

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: arch/x86/kernel/cpu/mcheck/k7.c checkpatch fixes
Andrew Morton [Wed, 30 Jan 2008 12:32:13 +0000 (13:32 +0100)]
x86: arch/x86/kernel/cpu/mcheck/k7.c checkpatch fixes

#88: FILE: arch/x86/kernel/cpu/mcheck/k7.c:34:
+ rdmsr(MSR_IA32_MC0_STATUS+i*4,low, high);
                               ^

ERROR: need space after that ',' (ctx:VxV)
#142: FILE: arch/x86/kernel/cpu/mcheck/p4.c:170:
+ rdmsr(MSR_IA32_MC0_STATUS+i*4,low, high);
                               ^

ERROR: need space after that ',' (ctx:VxV)
#180: FILE: arch/x86/kernel/cpu/mcheck/p6.c:34:
+ rdmsr(MSR_IA32_MC0_STATUS+i*4,low, high);
                               ^

total: 3 errors, 0 warnings, 114 lines checked

Your patch has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.

Please run checkpatch prior to sending patches

Cc: Min Zhang <mzhang@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: arch/x86/kernel/cpu/mcheck/ checkpatch fixes
Andrew Morton [Wed, 30 Jan 2008 12:32:12 +0000 (13:32 +0100)]
x86: arch/x86/kernel/cpu/mcheck/ checkpatch fixes

#40: FILE: arch/x86/kernel/cpu/mcheck/k7.c:46:
+ snprintf (misc, 20, "[%08x%08x]", ahigh, alow);

WARNING: line over 80 characters
#45: FILE: arch/x86/kernel/cpu/mcheck/k7.c:50:
+ snprintf (addr, 24, " at %08x%08x", ahigh, alow);

WARNING: no space between function name and open parenthesis '('
#45: FILE: arch/x86/kernel/cpu/mcheck/k7.c:50:
+ snprintf (addr, 24, " at %08x%08x", ahigh, alow);

WARNING: no space between function name and open parenthesis '('
#48: FILE: arch/x86/kernel/cpu/mcheck/k7.c:52:
+ printk (KERN_EMERG "CPU %d: Bank %d: %08x%08x%s%s\n",

WARNING: no space between function name and open parenthesis '('
#65: FILE: arch/x86/kernel/cpu/mcheck/p4.c:161:
+ printk (KERN_DEBUG "CPU %d: EIP: %08x EFLAGS: %08x\n"

WARNING: no space between function name and open parenthesis '('
#88: FILE: arch/x86/kernel/cpu/mcheck/p4.c:182:
+ snprintf (misc, 20, "[%08x%08x]", ahigh, alow);

WARNING: line over 80 characters
#93: FILE: arch/x86/kernel/cpu/mcheck/p4.c:186:
+ snprintf (addr, 24, " at %08x%08x", ahigh, alow);

WARNING: no space between function name and open parenthesis '('
#93: FILE: arch/x86/kernel/cpu/mcheck/p4.c:186:
+ snprintf (addr, 24, " at %08x%08x", ahigh, alow);

WARNING: no space between function name and open parenthesis '('
#96: FILE: arch/x86/kernel/cpu/mcheck/p4.c:188:
+ printk (KERN_EMERG "CPU %d: Bank %d: %08x%08x%s%s\n",

WARNING: no space between function name and open parenthesis '('
#120: FILE: arch/x86/kernel/cpu/mcheck/p6.c:46:
+ snprintf (misc, 20, "[%08x%08x]", ahigh, alow);

WARNING: line over 80 characters
#125: FILE: arch/x86/kernel/cpu/mcheck/p6.c:50:
+ snprintf (addr, 24, " at %08x%08x", ahigh, alow);

WARNING: no space between function name and open parenthesis '('
#125: FILE: arch/x86/kernel/cpu/mcheck/p6.c:50:
+ snprintf (addr, 24, " at %08x%08x", ahigh, alow);

WARNING: no space between function name and open parenthesis '('
#128: FILE: arch/x86/kernel/cpu/mcheck/p6.c:52:
+ printk (KERN_EMERG "CPU %d: Bank %d: %08x%08x%s%s\n",

total: 0 errors, 13 warnings, 100 lines checked

Your patch has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.

Please run checkpatch prior to sending patches

Cc: Min Zhang <mzhang@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agoarch/x86/kernel/cpu/mcheck/p4.c: cleanups
Min Zhang [Wed, 30 Jan 2008 12:32:11 +0000 (13:32 +0100)]
arch/x86/kernel/cpu/mcheck/p4.c: cleanups

SMP, the machine check exception dispatches all logical processors within a
physical package to the machine-check exception handler, so the printk
within each handler outputs concurrently and makes the output unreadable.
Refer to Intel system programming guide Part 1 Section 7.8.5
http://developer.intel.com/design/processor/manuals/253668.pdf

Signed-off-by: Min Zhang <mzhang@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: 32-bit EFI runtime service support: fixes in sync with 64-bit support
Huang, Ying [Wed, 30 Jan 2008 12:32:11 +0000 (13:32 +0100)]
x86: 32-bit EFI runtime service support: fixes in sync with 64-bit support

support according to fixes of x86_64 support.

- Delete efi_rt_lock because it is used during system early boot,
  before SMP is initialized.

- Change local_flush_tlb() to __flush_tlb_all() to flush global page
  mapping.

- Clean up includes.

- Revise Kconfig description.

- Enable noefi kernel parameter on i386.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agoreplace x86_read/write_per_cpu with a common function.
Glauber de Oliveira Costa [Wed, 30 Jan 2008 12:32:11 +0000 (13:32 +0100)]
replace x86_read/write_per_cpu with a common function.

x86_read_per_cpu() and its writeish sister are not present in x86_64. So in
this patch, we replace them with __get_cpu_var(), which is present in both

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: patching functions on 64-bit
Glauber de Oliveira Costa [Wed, 30 Jan 2008 12:32:10 +0000 (13:32 +0100)]
x86: patching functions on 64-bit

Like i386, x86_64 also need to include its own patching function.
(Well, if you're not in a hurry, and don't care about speed, you don't
really _need_ ;-))

So here they are. Not much different in essence from i386

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: move patching code to arch-specific file.
Glauber de Oliveira Costa [Wed, 30 Jan 2008 12:32:10 +0000 (13:32 +0100)]
x86: move patching code to arch-specific file.

The core patching code for paravirt is sufficiently different
among i386 and x86_64, and we move them to specific files.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: add CLBR_ defines for 64-bit
Glauber de Oliveira Costa [Wed, 30 Jan 2008 12:32:09 +0000 (13:32 +0100)]
x86: add CLBR_ defines for 64-bit

x86_64 needs a potentially larger clobber list than i386, due to its calling
convention. So we add more CLBR_ defines for it.
Note that CLBR_ANY is different for each of the architectures, since it comprises
the notion of "All call clobbers in this architecture"

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: cleanup CLI_STRING, STI_STRING and friends
Glauber de Oliveira Costa [Wed, 30 Jan 2008 12:32:09 +0000 (13:32 +0100)]
x86: cleanup CLI_STRING, STI_STRING and friends

Since the advent of ticket locking, CLI_STRING, STI_STRING, and friends
are not used anymore. They can now be safely deleted.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: replace privileged instructions with paravirt macros
Glauber de Oliveira Costa [Wed, 30 Jan 2008 12:32:08 +0000 (13:32 +0100)]
x86: replace privileged instructions with paravirt macros

The assembly code in entry_64.S issues a bunch of privileged instructions,
like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so,
and we then replace them with macros that will do the right thing.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: adds paravirt hook for swapgs
Glauber de Oliveira Costa [Wed, 30 Jan 2008 12:32:08 +0000 (13:32 +0100)]
x86: adds paravirt hook for swapgs

This patch adds paravirt hook for swapgs operation, which is a privileged
operation in x86_64.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: add macro for privileged 64-bit operation
Glauber de Oliveira Costa [Wed, 30 Jan 2008 12:32:07 +0000 (13:32 +0100)]
x86: add macro for privileged 64-bit operation

i386 has a macro GET_CR0_INTO_EAX, used in early trap handling code.
x86_64 has similar needs, only it needs to put cr2 into rcx. We provide
a macro for such task, in the same way

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: change irq functions to accomodate 64-bit
Glauber de Oliveira Costa [Wed, 30 Jan 2008 12:32:07 +0000 (13:32 +0100)]
x86: change irq functions to accomodate 64-bit

This patch changes the irq handling function definitions
in paravirt.h (like raw_local_irq_disable) to accomodate for x86_64.
The differences are in the calling convention.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: adjust assembly macros on 64-bit as well.
Glauber de Oliveira Costa [Wed, 30 Jan 2008 12:32:06 +0000 (13:32 +0100)]
x86: adjust assembly macros on 64-bit as well.

This patch adjust the paravirt macros used in assembly code
to accomodate for x86_64 as well.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: change assembly definition of paravirt_patch_site
Glauber de Oliveira Costa [Wed, 30 Jan 2008 12:32:06 +0000 (13:32 +0100)]
x86: change assembly definition of paravirt_patch_site

To account for differences in x86_64, we change the macros that
create raw instances of the paravirt_patch_site struct.
We need to align 64-pointers to 64-bit boundaries, so we add an alignment
directive. Also, we need to make room for a word-sized pointer,
instead of a fixed 32-bit one

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: provide paravirtualized hook for rdtscp
Glauber de Oliveira Costa [Wed, 30 Jan 2008 12:32:05 +0000 (13:32 +0100)]
x86: provide paravirtualized hook for rdtscp

This patch adds a field in pv_cpu_ops for a paravirtualized hook
for rdtscp, needed for x86_64.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: cleanup write_tsc
Glauber de Oliveira Costa [Wed, 30 Jan 2008 12:32:05 +0000 (13:32 +0100)]
x86: cleanup write_tsc

write_tsc() does not need to be enclosed in any paravirt closure,
as it uses wrmsr(). So we rip off the duplicate in msr.h
and the definition from paravirt.h

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: adjust PVOP_CALL/VCALL macros for 64-bit
Glauber de Oliveira Costa [Wed, 30 Jan 2008 12:32:05 +0000 (13:32 +0100)]
x86: adjust PVOP_CALL/VCALL macros for 64-bit

This patch adjust the PVOP_VCALL and PVOP_CALL macros to
work with x86_64. It has a different calling convention, and
we use auxiliary macros to account for both calling conventions
as cleanly as possible

Comments are adjusted accordingly.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: change paravirt_32.c name
Glauber de Oliveira Costa [Wed, 30 Jan 2008 12:32:04 +0000 (13:32 +0100)]
x86: change paravirt_32.c name

This patch changes paravirt_32.c to paravirt.c. The goal
is to have paravirt support in x86_64, so we do it in a common file

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86, ptrace: overflow signal API
Markus Metzger [Wed, 30 Jan 2008 12:32:04 +0000 (13:32 +0100)]
x86, ptrace: overflow signal API

Establish the user API for sending a user-defined signal to the traced task on a BTS buffer overflow.

This should complete the user API for the BTS ptrace extension.
The patches so far implement wrap-around overflow handling as is needed for debugging.

The remaining open is another overflow handling mechanism that sends a signal to the traced task on a buffer overflow.
This will take some more time from my side.

Since, from a user perspective, this occurs behind the scenes, the patch set should already be useful. More features may/will be added on top of it (overflow signal, pageable back-up buffers, kernel tracing, core file support, profiling, ...).

Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86, ptrace: add buffer size checks
Markus Metzger [Wed, 30 Jan 2008 12:32:03 +0000 (13:32 +0100)]
x86, ptrace: add buffer size checks

Pass the buffer size for (most) ptrace commands that pass user-allocated buffers and check that size before accessing the buffer. Unfortunately, PTRACE_BTS_GET already uses all 4 parameters.
Commands that access user buffers return the number of bytes or records read or written.

Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86, ptrace: support 32bit-cross-64bit BTS recording
Markus Metzger [Wed, 30 Jan 2008 12:32:03 +0000 (13:32 +0100)]
x86, ptrace: support 32bit-cross-64bit BTS recording

Support BTS recording of 32bit and 64bit tasks from 32bit or 64bit tasks.

Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86, ptrace: rlimit BTS buffer allocation
Markus Metzger [Wed, 30 Jan 2008 12:32:03 +0000 (13:32 +0100)]
x86, ptrace: rlimit BTS buffer allocation

Check the rlimit of the tracing task for total and locked memory when allocating the BTS buffer.

Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: move deeply indented code to reenter_kprobe
Masami Hiramatsu [Wed, 30 Jan 2008 12:32:02 +0000 (13:32 +0100)]
x86: move deeply indented code to reenter_kprobe

Move some deeply indented code related to re-entrance processing
from kprobe_handler() to reenter_kprobe().

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: add reenter_kprobe helper
Harvey Harrison [Wed, 30 Jan 2008 12:32:02 +0000 (13:32 +0100)]
x86: add reenter_kprobe helper

[ mhiramat@redhat.com: updated it to latest x86.git ]

Factor common X86_32, X86_64 kprobe reenter logic from deeply
indented section to helper function.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
16 years agox86: fix kprobe_handler reenable preemption
Masami Hiramatsu [Wed, 30 Jan 2008 12:32:01 +0000 (13:32 +0100)]
x86: fix kprobe_handler reenable preemption

Fix a preemption bug in kprobe_handler(). It has to call preempt_enable()
before returning.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: voluntary leave_mm before entering ACPI C3
Venki Pallipadi [Wed, 30 Jan 2008 12:32:01 +0000 (13:32 +0100)]
x86: voluntary leave_mm before entering ACPI C3

Aviod TLB flush IPIs during C3 states by voluntary leave_mm()
before entering C3.

The performance impact of TLB flush on C3 should not be significant with
respect to C3 wakeup latency. Also, CPUs tend to flush TLB in hardware while in
C3 anyways.

On a 8 logical CPU system, running make -j2, the number of tlbflush IPIs goes
down from 40 per second to ~ 0. Total number of interrupts during the run
of this workload was ~1200 per second, which makes it ~3% savings in wakeups.

There was no measurable performance or power impact however.

[ akpm@linux-foundation.org: symbol export fixes. ]

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: add some pirq debugging
Ingo Molnar [Wed, 30 Jan 2008 12:32:00 +0000 (13:32 +0100)]
x86: add some pirq debugging

we use a few static mapping rules in our pirq routing functions,
and for example regression f3ac84324fd94 was due to the pirq
being out of range of the remapping array. Put in a few
WARN_ON_ONCE() lines so that we get notified about any such
out-of-bound incidents.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agoPCI: remove default PCI expansion ROM memory allocation
Gary Hade [Wed, 30 Jan 2008 12:31:59 +0000 (13:31 +0100)]
PCI: remove default PCI expansion ROM memory allocation

increasing number of PCI slots in large multi-node systems.  The kernel
currently attempts by default to allocate memory for all PCI expansion
ROMs so there has also been an increasing number of PCI memory
allocation failures seen on these systems.  This occurs because the BIOS
either (1) provides insufficient PCI memory resource for all the
expansion ROMs or (2) provides adequate PCI memory resource for
expansion ROMs but provides the space in kernel unexpected BIOS assigned
P2P non-prefetch windows.

The resulting PCI memory allocation failures may be benign when related
to memory requests for expansion ROMs themselves but in some cases they
can occur when attempting to allocate space for more critical BARs.
This can happen when a successful expansion ROM allocation request
consumes memory resource that was intended for a non-ROM BAR.  We have
seen this happen during PCI hotplug of an adapter that contains a P2P
bridge where successful memory allocation for an expansion ROM BAR on
device behind the bridge consumed memory that was intended for a non-ROM
BAR on the P2P bridge.  In all cases the allocation failure messages can
be very confusing for users.

This patch addresses the issue by changing the kernel default behavior
so that expansion ROM memory allocations are no longer attempted by
default when the BIOS has not assigned a specific address range to the
expansion ROM BAR.  This was done by changing the 'pci=rom' boot option
behavior for BIOS unassigned expansion ROMs to actually match it's
current kernel-parameters.txt description which already implies "off" by
default. Behavior for BIOS assigned expansion ROMs implemented in
pcibios_assign_resources() [arch/x86/pci/i386.c] is unchanged.

Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Cc: Greg KH <greg@kroah.com>
Cc: Jan Beulich <jbeulich@novell.com>
Acked-by: "Jun'ichi Nomura" <j-nomura@ce.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: fix dmi_alloc() to not advance alloc index in case of
Parag Warudkar [Wed, 30 Jan 2008 12:31:59 +0000 (13:31 +0100)]
x86: fix dmi_alloc() to not advance alloc index in case of

dmi_alloc() for CONFIG_X86_64 is defined to allocate from a static array
and it maintains a allocation index which is advanced each time allocation
is attempted - it gets incremented even if an allocation fails thereby
depriving any future request that may be small enough to be satisfied from
the array.

Fix this by first testing if allocation is going to be possible and
incrementing alloc index only then.

Signed-off-by: Parag Warudkar <parag.warudkar@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: fix DMI out of memory problems
Parag Warudkar [Wed, 30 Jan 2008 12:31:59 +0000 (13:31 +0100)]
x86: fix DMI out of memory problems

People with HP Desktops (including me) encounter couple of DMI errors
during boot - dmi_save_oem_strings_devices: out of memory and
dmi_string: out of memory.

On some HP desktops the DMI data include OEM strings (type 11) out of
which only few are meaningful and most other are empty. DMI code
religiously creates copies of these 27 strings (65 bytes each in my
case) and goes OOM in dmi_string().

If DMI_MAX_DATA is bumped up a little then it goes and fails in
dmi_save_oem_strings while allocating dmi_devices of sizeof(struct
dmi_device) corresponding to these strings.

On x86_64 since we cannot use alloc_bootmem this early, the code uses a
static array of 2048 bytes (DMI_MAX_DATA) for allocating the memory DMI
needs. It does not survive the creation of empty strings and devices.

Fix this by detecting and not newly allocating empty strings and instead
using a one statically defined dmi_empty_string.

Also do not create a new struct dmi_device for each empty string - use
one statically define dmi_device with .name=dmi_empty_string and add
that to the dmi_devices list.

On x64 this should stop the OOM with same current size of DMI_MAX_DATA
and on x86 this should save a good amount of (27*65 bytes +
27*sizeof(struct dmi_device) bootmem.

Compile and boot tested on both 32-bit and 64-bit x86.

Signed-off-by: Parag Warudkar <parag.warudkar@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: remove unused include/asm-x86/processor_32/64.h
Ingo Molnar [Wed, 30 Jan 2008 12:31:58 +0000 (13:31 +0100)]
x86: remove unused include/asm-x86/processor_32/64.h

remove unused include/asm-x86/processor_32/64.h.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: finish processor.h integration
Glauber de Oliveira Costa [Wed, 30 Jan 2008 12:31:57 +0000 (13:31 +0100)]
x86: finish processor.h integration

What's left in processor_32.h and processor_64.h cannot be cleanly
integrated. However, it's just a couple of definitions. They are moved
to processor.h around ifdefs, and the original files are deleted. Note that
there's much less headers included in the final version.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: remove __init modifier from header declaration
Glauber de Oliveira Costa [Wed, 30 Jan 2008 12:31:57 +0000 (13:31 +0100)]
x86: remove __init modifier from header declaration

This patch removes the __init modifier from an extern function
declaration in acpi.h.

Besides not being strictly needed, it requires the inclusion of
linux/init.h, which is usually not even included directly, increasing
header mess by a lot.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: x86 ptrace generic requests
Roland McGrath [Wed, 30 Jan 2008 12:31:56 +0000 (13:31 +0100)]
x86: x86 ptrace generic requests

This removes duplicated code by calling the generic ptrace_request and
compat_ptrace_request functions for the things they already handle.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: x86 core dump TLS
Roland McGrath [Wed, 30 Jan 2008 12:31:56 +0000 (13:31 +0100)]
x86: x86 core dump TLS

This makes ELF core dumps of 32-bit processes include a new
note type NT_386_TLS (0x200) giving the contents of the TLS
slots in struct user_desc format.  This lets post mortem
examination figure out what the segment registers mean like
the debugger does with get_thread_area on a live process.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: x86 ia32_binfmt removal
Roland McGrath [Wed, 30 Jan 2008 12:31:56 +0000 (13:31 +0100)]
x86: x86 ia32_binfmt removal

Remove the old ia32_binfmt.c file, which is no longer used.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: compat_binfmt_elf
Roland McGrath [Wed, 30 Jan 2008 12:31:55 +0000 (13:31 +0100)]
x86: compat_binfmt_elf

This switches x86-64's 32-bit ELF support to use the shared
fs/compat_binfmt_elf.c code instead of our own ia32_binfmt.c.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: x86 user_regset cleanup
Roland McGrath [Wed, 30 Jan 2008 12:31:55 +0000 (13:31 +0100)]
x86: x86 user_regset cleanup

This removes a bunch of dead code that is no longer needed now
that the user_regset interfaces are being used for all these jobs.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: x86 ptrace user_regset
Roland McGrath [Wed, 30 Jan 2008 12:31:54 +0000 (13:31 +0100)]
x86: x86 ptrace user_regset

This cleans up the PTRACE_*REGS* request code so each one is just a
simple call to copy_regset_to_user or copy_regset_from_user.  The
ptrace layouts already match the user_regset formats (core dump formats).

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: x86 CORE_DUMP_USE_REGSET
Roland McGrath [Wed, 30 Jan 2008 12:31:54 +0000 (13:31 +0100)]
x86: x86 CORE_DUMP_USE_REGSET

This switches x86 to the user_regset-based code for ELF core dumps.
The core dumps come out exactly the same as before.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: x86 user_regset_view
Roland McGrath [Wed, 30 Jan 2008 12:31:53 +0000 (13:31 +0100)]
x86: x86 user_regset_view

This defines task_user_regset_view and the tables
describing the x86 user_regset layouts for 32 and 64.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: x86 user_regset general regs
Roland McGrath [Wed, 30 Jan 2008 12:31:52 +0000 (13:31 +0100)]
x86: x86 user_regset general regs

This adds accessor functions in the user_regset style for
the general registers (struct user_regs_struct).

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: x86 user_regset TLS
Roland McGrath [Wed, 30 Jan 2008 12:31:52 +0000 (13:31 +0100)]
x86: x86 user_regset TLS

This adds accessor functions in the user_regset style for the TLS data.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: x86 TLS desc_struct cleanup
Roland McGrath [Wed, 30 Jan 2008 12:31:51 +0000 (13:31 +0100)]
x86: x86 TLS desc_struct cleanup

This cleans up the TLS code to use struct desc_struct and to separate the
encoding and installation magic from the interface wrappers.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: x86 i387 cleanup
Roland McGrath [Wed, 30 Jan 2008 12:31:51 +0000 (13:31 +0100)]
x86: x86 i387 cleanup

This removes all the old code that is no longer used after
the i387 unification and cleanup.  The i387_64.h is renamed
to i387.h with no changes, but since it replaces the nonempty
one-line stub i387.h it looks like a big diff and not a rename.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: x86 i387 user_regset
Roland McGrath [Wed, 30 Jan 2008 12:31:50 +0000 (13:31 +0100)]
x86: x86 i387 user_regset

This revamps the i387 code to be shared across 32-bit, 64-bit,
and 32-on-64.  It does so by consolidating the code in one place
based on the user_regset accessor interfaces.  This switches
32-bit to using the i387_64.h header and 64-bit to using the
i387.c that was previously i387_32.c, but that's what took the
least cleanup in each file.  Here i387.h is stubbed to always
include i387_64.h rather than renaming the file, to keep this
diff smaller and easier to read.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: i387 renaming
Roland McGrath [Wed, 30 Jan 2008 12:31:50 +0000 (13:31 +0100)]
x86: i387 renaming

This renames arch/x86/kernel/{i387_32.c => i387.c}.
This is a pure renaming, but paves the way for merging
the 32-bit and 64-bit versions of this code.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: x86 user_regset math_emu
Roland McGrath [Wed, 30 Jan 2008 12:31:49 +0000 (13:31 +0100)]
x86: x86 user_regset math_emu

This converts the ptrace/signal accessors for i387 math_emu
state to the user_regset interface style, and calls these
from the old interfaces.

It also cleans up math_emulate's ptrace check to be a
single-step check, which is what it really wants.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: x86 i387 header cleanup
Roland McGrath [Wed, 30 Jan 2008 12:31:49 +0000 (13:31 +0100)]
x86: x86 i387 header cleanup

This moves some code into asm-x86/i387_64.h in preparation for
unifying this code between 32 and 64.  The 32-bit versions of
some things are copied in some existing names changed to match
32-bit names and share code.  For 64, save_i387 is moved into
an inline from i387_64.c; this matches restore_i387, which is
already an inline, and makes sense since there is exactly one
caller (in signal_64.c).  The save_i387 function could use more
cosmetic cleanup, but it is just moved verbatim in this patch.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: x86 i387 unify structs
Roland McGrath [Wed, 30 Jan 2008 12:31:48 +0000 (13:31 +0100)]
x86: x86 i387 unify structs

The i387_fxsave_struct formats really have the same layout
on 32 and 64, with only some slightly different use of a few
fields.  The i387_fsave_struct and i387_soft_struct formats
are never used by 64-bit kernels, but it doesn't hurt to
have the unused types in the union and cuts down on the
amount of #ifdef hair required throughout the i387 code.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: x86-64 wired cpu_has macros
Roland McGrath [Wed, 30 Jan 2008 12:31:48 +0000 (13:31 +0100)]
x86: x86-64 wired cpu_has macros

This adds hard-wired definitions for the remaining cpu_has_* macros
that correspond to flags required-features.h demands are set for
64-bit.  Using these can efficiently avoid some #ifdef's when
merging 32-bit and 64-bit code together.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>