Paul Walmsley [Sat, 19 Apr 2008 01:43:18 +0000 (19:43 -0600)]
clockdomains: add base OMAP2/3 clockdomain code
This patch creates an interface to the clockdomain registers in the
PRM/CM modules on OMAP2/3. This interface is intended to be used by
PM code, e.g., pm.c; not by device drivers directly.
The patch also adds clockdomain usecount tracking. This is intended
to be called whenever the first clock in a clockdomain is enabled, or
when the last enabled clock in a clockdomain is disabled. If the
clockdomain is in software-supervised mode, the code will force-wakeup
or force-sleep the clockdomain. If the clockdomain is in
hardware-supervised mode, the first clock enable will add sleep and
wakeup dependencies on a user-selectable set of parent domains (usually
MPU & IVA2), and the disable will remove them.
Each clockdomain will be defined in later patches as static
structures. The clockdomain structures are linked into a list at boot
by clkdm_register(), similar to the OMAP clock code.
The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_CLOCKDOMAIN, which
when enabled will emit verbose debug messages via pr_debug().
Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Paul Walmsley [Sat, 19 Apr 2008 01:26:29 +0000 (19:26 -0600)]
add base OMAP2/3 powerdomain code
This patch creates an interface to the powerdomain registers in the
PRM/CM modules on OMAP2/3. This interface is intended to be used by
PM code, e.g., pm.c; not by device drivers directly.
Each powerdomain will be defined in later patches as static
structures. Also defined are dependencies between powerdomains,
used for adding and removing PM_WKDEP and CM_SLEEPDEP bits. The
powerdomain structures are linked into a list at boot by
pwrdm_register(), similar to the OMAP clock code.
The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_POWERDOMAIN, which
when enabled will emit verbose debug messages via pr_debug().
Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Paul Walmsley [Sat, 19 Apr 2008 01:26:01 +0000 (19:26 -0600)]
add OMAP chip type structure; clean up mach-omap2/id.c
Add a new OMAP chip identification interface, omap_chip_id.
omap_chip_id is a structure which contains one bit for each OMAP2/3
CPU type, and on 3430, ES level. For example, the CHIP_IS_OMAP2420
bit is set in omap_chip at boot on an OMAP2420. On OMAP3430ES2, both
CHIP_IS_OMAP3430 and CHIP_IS_OMAP3430ES2 bits are set.
omap_chip is set in mach-omap2/id.c by _set_omap_chip(). Other
code should use the omap_chip_is() function to test against omap_chip.
Also, clean up id.c by splitting some code out of
omap_check_revision() into its own function, _set_system_rev(); and
converting some debug printk()s into pr_debug().
Second revision.
Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
This patch updates the audio driver based on tsc2101 chip
for H2 board. tsc2101 driver was updated against new spi
framework, but its audio driver for H2 wasn't.
Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br> Signed-off-by: Tony Lindgren <tony@atomide.com>
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
[patch 7/7] vfs: mountinfo: show dominating group id
[patch 6/7] vfs: mountinfo: add /proc/<pid>/mountinfo
[patch 5/7] vfs: mountinfo: allow using process root
[patch 4/7] vfs: mountinfo: add mount peer group ID
[patch 3/7] vfs: mountinfo: add mount ID
[patch 2/7] vfs: mountinfo: add seq_file_root()
[patch 1/7] vfs: mountinfo: add dentry_path()
[PATCH] remove unused label in xattr.c (noise from ro-bind)
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
iwlwifi: Fix built-in compilation of iwlcore
net: Unexport move_addr_to_{kernel,user}
rt2x00: Select LEDS_CLASS.
iwlwifi: Select LEDS_CLASS.
leds: Do not guard NEW_LEDS with HAS_IOMEM
[IPSEC]: Fix catch-22 with algorithm IDs above 31
time: Export set_normalized_timespec.
tcp: Make use of before macro in tcp_input.c
hamradio: Remove unneeded and deprecated cli()/sti() calls in dmascc.c
[NETNS]: Remove empty ->init callback.
[DCCP]: Convert do_gettimeofday() to getnstimeofday().
[NETNS]: Don't initialize err variable twice.
[NETNS]: The ip6_fib_timer can work with garbage on net namespace stop.
[IPV4]: Convert do_gettimeofday() to getnstimeofday().
[IPV4]: Make icmp_sk_init() static.
[IPV6]: Make struct ip6_prohibit_entry_template static.
tcp: Trivial fix to correct function name in a comment in net/ipv4/tcp.c
[NET]: Expose netdevice dev_id through sysfs
skbuff: fix missing kernel-doc notation
[ROSE]: Fix soft lockup wrt. rose_node_list_lock
Len Brown [Wed, 23 Apr 2008 04:09:13 +0000 (00:09 -0400)]
pnpacpi: fix potential corruption on "pnpacpi: exceeded the max number of IRQ resources 2"
PNP_MAX_IRQ is 2
If a device invokes pnpacpi_parse_allocated_irqresource() 0, 1, or 2 times, we are happy.
The 3rd time, we will fail and print "pnpacpi: exceeded the max number of IRQ resources: 2"
The 4th and subsequent calls (if this ever happened) would silently scribble on
irq_resource[2], which doesn't actualy exist.
Found-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[mszeredi@suse.cz] rewrite and split big patch into managable chunks
/proc/mounts in its current form lacks important information:
- propagation state
- root of mount for bind mounts
- the st_dev value used within the filesystem
- identifier for each mount and it's parent
It also suffers from the following problems:
- not easily extendable
- ambiguity of mountpoints within a chrooted environment
- doesn't distinguish between filesystem dependent and independent options
- doesn't distinguish between per mount and per super block options
This patch introduces /proc/<pid>/mountinfo which attempts to address
all these deficiencies.
Code shared between /proc/<pid>/mounts and /proc/<pid>/mountinfo is
extracted into separate functions.
Thanks to Al Viro for the help in getting the design right.
Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Miklos Szeredi [Thu, 27 Mar 2008 12:06:24 +0000 (13:06 +0100)]
[patch 5/7] vfs: mountinfo: allow using process root
Allow /proc/<pid>/mountinfo to use the root of <pid> to calculate
mountpoints.
- move definition of 'struct proc_mounts' to <linux/mnt_namespace.h>
- add the process's namespace and root to this structure
- pass a pointer to 'struct proc_mounts' into seq_operations
In addition the following cleanups are made:
- use a common open function for /proc/<pid>/{mounts,mountstat}
- surround namespace.c part of these proc files with #ifdef CONFIG_PROC_FS
- make the seq_operations structures const
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Miklos Szeredi [Thu, 27 Mar 2008 12:06:23 +0000 (13:06 +0100)]
[patch 4/7] vfs: mountinfo: add mount peer group ID
Add a unique ID to each peer group using the IDR infrastructure. The
identifiers are reused after the peer group dissolves.
The IDR structures are protected by holding namepspace_sem for write
while allocating or deallocating IDs.
IDs are allocated when a previously unshared vfsmount becomes the
first member of a peer group. When a new member is added to an
existing group, the ID is copied from one of the old members.
IDs are freed when the last member of a peer group is unshared.
Setting the MNT_SHARED flag on members of a subtree is done as a
separate step, after all the IDs have been allocated. This way an
allocation failure can be cleaned up easilty, without affecting the
propagation state.
Based on design sketch by Al Viro.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Miklos Szeredi [Thu, 27 Mar 2008 12:06:21 +0000 (13:06 +0100)]
[patch 2/7] vfs: mountinfo: add seq_file_root()
Add a new function:
seq_file_root()
This is similar to seq_path(), but calculates the path relative to the
given root, instead of current->fs->root. If the path was unreachable
from root, then modify the root parameter to reflect this.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Ram Pai [Thu, 27 Mar 2008 12:06:20 +0000 (13:06 +0100)]
[patch 1/7] vfs: mountinfo: add dentry_path()
[mszeredi@suse.cz] split big patch into managable chunks
Add the following functions:
dentry_path()
seq_dentry()
These are similar to d_path() and seq_path(). But instead of
calculating the path within a mount namespace, they calculate the path
from the root of the filesystem to a given dentry, ignoring mounts
completely.
Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
[PATCH] get rid of __exit_files(), __exit_fs() and __put_fs_struct()
[PATCH] proc_readfd_common() race fix
[PATCH] double-free of inode on alloc_file() failure exit in create_write_pipe()
[PATCH] teach seq_file to discard entries
[PATCH] umount_tree() will unhash everything itself
[PATCH] get rid of more nameidata passing in namespace.c
[PATCH] switch a bunch of LSM hooks from nameidata to path
[PATCH] lock exclusively in collect_mounts() and drop_collected_mounts()
[PATCH] move a bunch of declarations to fs/internal.h
Commit 884525655d07fdee9245716b998ecdc45cdd8007 ("PCI: clean up resource
alignment management") didn't set the alignment information for the
cardbus window resources, causing their subsequent allocations to fail
miserably with a message like
yenta_cardbus 0000:15:00.0: device not available because of BAR 7 [100:1ff] collisions
yenta_cardbus: probe of 0000:15:00.0 failed with error -16
or similar.
This fixes it and clarifies the code a bit too (we used to have to use
the insane PCI bridge alignment logic that put the alignment in the
"start" field, this makes it use the slightly easier-to-understand
size-based alignment, and allows us to set the resource start to zero
until it gets allocated).
Reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Tue, 22 Apr 2008 09:35:42 +0000 (05:35 -0400)]
[PATCH] get rid of __exit_files(), __exit_fs() and __put_fs_struct()
The only reason to have separated __...() for those was to keep them inlined
for local users in exit.c. Since Alexey removed the inline on those, there's
no reason whatsoever to keep them around; just collapse with normal variants.
Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
[IA64] run drivers/misc/sgi-xp through scripts/checkpatch.pl
[IA64] run rest drivers/misc/sgi-xp through scripts/Lindent
[IA64] run some drivers/misc/sgi-xp through scripts/Lindent
[IA64] move XP and XPC to drivers/misc/sgi-xp
[IA64] minor irq handler cleanups
[IA64] simplify notify hooks in mca.c
[IA64] do notify DIE_MCA_MONARCH_PROCESS for each monarchs
[IA64] disable interrupts on exit of ia64_trace_syscall
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
SELinux fixups needed for preemptable RCU from -rt
SELinux: no BUG_ON(!ss_initialized) in selinux_clone_mnt_opts
Dean Nelson [Tue, 22 Apr 2008 19:50:17 +0000 (14:50 -0500)]
[IA64] run drivers/misc/sgi-xp through scripts/checkpatch.pl
Addressed issues raised by scripts/checkpatch.pl. Removed unnecessary curly
braces. Eliminated uses of volatiles and use of kernel_thread() and daemonize().
Signed-off-by: Dean Nelson <dcn@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
i2c: Fix platform driver hotplug/coldplug
i2c: New driver for the SuperH Mobile I2C bus controller
i2c/scx200_acb: Don't use 0 as NULL pointer
i2c-bfin-twi: Fix mismatch in add timer and delete timer
i2c-bfin-twi: Just let i2c-bfin-twi driver depends on BLACKFIN
i2c-bfin-twi: Use simpler comment headers and strip out information that is maintained in the scm's log
i2c-bfin-twi: Cleanup driver descriptions, versions and some module useful information
i2c-bfin-twi: Add missing pin mux operation
i2c-bfin-twi: Add platform_resource interface to support multi-port TWI controllers
i2c-bfin-twi: Add repeat start feature to avoid break of a bundle of i2c master xfer operation
i2c: Remove trailing whitespaces in busses/Kconfig
i2c: Replace remaining __FUNCTION__ occurrences
i2c: Renesas SH7760 I2C master driver
i2c-dev: Split i2cdev_ioctl
i2c-ibm_iic: Support building as an of_platform driver
i2c-ibm_iic: Change the log levels
i2c: Add platform driver on top of the new pca-algorithm
i2c-algo-pca: Extend for future drivers
i2c-algo-pca: Remove trailing whitespaces and unnecessary UTF
i2c: Remove the algorithm drivers from the config menu
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
dlm: linux/{dlm,dlm_device}.h: cleanup for userspace
dlm: common max length definitions
dlm: move plock code from gfs2
dlm: recover nodes that are removed and re-added
dlm: save master info after failed no-queue request
dlm: make dlm_print_rsb() static
dlm: match signedness between dlm_config_info and cluster_set
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: Suppress hidinput for Samsung IR control
HID: remove 60x GTCO devices from blacklist
HID: export headers properly
HID: WiseGroup 866 Dual Joypad needs output reports quirk
HID: ThrustMaster FF driver is no longer experimental
HID: Logitech diNovo Mini pad support
HID: fix race between open() and disconnect() in usbhid
HID: make hid_input_field and usbhid_modify_dquirk static
HID: pass numbered reports properly to hidraw
HID: fix misplaced rdesc quirk
HID: force feedback driver for Logitech Rumblepad 2
HID: move wait from hid to usbhid
HID: make function from dbg_hid
HID: fix sparse warnings
HID: only dump report traffic with debug level 2
HID: patch to add NOGET for DMI/Acomdata
HID: Sunplus Wireless Desktop needs report descriptor fixup
HID: quirk for MS Wireless Desktop Receiver (model 1028)
HID: fixup fullspeed interval on highspeed Afatech DVB-T IR kbd
HID: fix build failure in hiddev_ioctl with gcc 3.2
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6: (41 commits)
udf: use crc_itu_t from lib instead of udf_crc
udf: Fix compilation warnings when UDF debug is on
udf: Fix bug in VAT mapping code
udf: Add read-only support for 2.50 UDF media
udf: Fix handling of multisession media
udf: Mount filesystem read-only if it has pseudooverwrite partition
udf: Handle VAT packed inside inode properly
udf: Allow loading of VAT inode
udf: Fix detection of VAT version
udf: Silence warning about accesses beyond end of device
udf: Improve anchor block detection
udf: Cleanup anchor block detection.
udf: Move processing of virtual partitions
udf: Move filling of partition descriptor info into a separate function
udf: Improve error recovery on mount
udf: Cleanup volume descriptor sequence processing
udf: fix anchor point detection
udf: Remove declarations of arrays of size UDF_NAME_LEN (256 bytes)
udf: Remove checking of existence of filename in udf_add_entry()
udf: Mark udf_process_sequence() as noinline
...
Petr Tesarik [Tue, 22 Apr 2008 03:36:52 +0000 (05:36 +0200)]
fix brd allocation flags
While looking at the implementation of the Ram backed block device
driver, I stumbled across a write-only local variable, which makes
little sense, so I assume it should actually work like this:
Signed-off-by: Petr Tesarik <ptesarik@suse.cz> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kay Sievers [Tue, 22 Apr 2008 20:16:49 +0000 (22:16 +0200)]
i2c: Fix platform driver hotplug/coldplug
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform
modalias is prefixed with "platform:". Add MODULE_ALIAS() to the
hotpluggable I2C platform drivers, to allow module auto loading.
[ db: add some more drivers ]
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
Magnus Damm [Tue, 22 Apr 2008 20:16:49 +0000 (22:16 +0200)]
i2c: New driver for the SuperH Mobile I2C bus controller
This is V5 of the SuperH Mobile I2C Controller Driver. A simple Master
only driver for the I2C block included in processors such as sh7343,
sh7722 and sh7723. Tested on a sh7722 MigoR using a rs5c732b rtc.
Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
Hans Schillstrom [Tue, 22 Apr 2008 20:16:48 +0000 (22:16 +0200)]
i2c-bfin-twi: Fix mismatch in add timer and delete timer
Move init_completion to just before i2c transfer.
http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3385
Signed-off-by: Hans Schillstrom <hans.schillstrom@shlsys.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
Blackfin TWI controller hardware pin should be requested from GPIO port controller
Before BF54x, there is no need to do this. But as long as BF54x and BF52x
are supported by this generic driver, the missing pin mux operation should be
added.
Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
i2c-bfin-twi: Add platform_resource interface to support multi-port TWI controllers
- Dynamic alloc the resource of TWI driver data according to board information
- TWI register read/write accessor based on dynamic regs_base
- Support TWI0/TWI1 for BF54x
Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Tue, 22 Apr 2008 20:16:47 +0000 (22:16 +0200)]
i2c-dev: Split i2cdev_ioctl
Split the handling of the I2C_RDWR and I2C_SMBUS ioctls to their own
functions. This limits the stack usage, saves one level of indentation
and makes the code more readable.
Sean MacLennan [Tue, 22 Apr 2008 20:16:47 +0000 (22:16 +0200)]
i2c-ibm_iic: Support building as an of_platform driver
This patch allows the i2c-ibm_iic driver to be built either as an ocp
driver or an of_platform driver. This allows it to run under the powerpc
arch but maintains backward compatibility with the ppc arch.
Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
Wolfram Sang [Tue, 22 Apr 2008 20:16:46 +0000 (22:16 +0200)]
i2c-algo-pca: Extend for future drivers
The separation between algorithm and adapter was unsharp at places. This was
partly hidden by the fact, that the ISA-driver allowed just one instance and
had all private data in static variables. This patch makes neccessary
preparations to add a platform driver on top of the algorithm, while still
supporting ISA. Note: Due to lack of hardware, the ISA-driver could not be
tested except that it builds.
Concerning the core struct i2c_algo_pca_data:
- A private data field was added, all hardware dependant data may go here.
Similar to other algorithms, now a pointer to this data is passed to the
adapter's functions. In order to make as less changes as possible to the
ISA-driver, it leaves the private data empty and still only uses its static
variables.
- A "reset_chip" function pointer was added; such a functionality must come
from the adapter, not the algorithm.
- use a variable "i2c_clock" instead of a function pointer "get_clock",
allowing for write access to a default in case a wrong value was supplied.
In the algorithm-file:
- move "i2c-pca-algo.h" into "linux/i2c-algo-pca.h"
- now using per_instance timeout values (i2c_adap->timeout)
- error messages specify the device, not only the driver name
- restructure initialization to easily support "i2c_add_numbered_adapter"
- drop "retries" and "own" (i2c address) as they were unused
(The state-machine for I2C-communication was not touched.)
In the ISA-driver:
- adapt to new algorithm
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
Wolfram Sang [Tue, 22 Apr 2008 20:16:46 +0000 (22:16 +0200)]
i2c-algo-pca: Remove trailing whitespaces and unnecessary UTF
Remove trailing whitespaces to make further patches more readable. Also remove
an unnecessary UTF-char for simplicity ("us" for microseconds is fine enough).
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Tue, 22 Apr 2008 20:16:46 +0000 (22:16 +0200)]
i2c: Remove the algorithm drivers from the config menu
The algorithm drivers are helper drivers that are selected automatically
as needed. There's no point in listing them in the config menu, it can
only confuse users and waste their time.
drivers/input/keyboard/lm8323.c: In function 'lm8323_pwm_store_time':
drivers/input/keyboard/lm8323.c:590: warning: passing argument 3 of 'strict_strtoul' from incompatible pointer type
drivers/input/keyboard/lm8323.c: In function 'lm8323_set_disable':
drivers/input/keyboard/lm8323.c:664: warning: passing argument 3 of 'strict_strtoul' from incompatible pointer type
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Jeff Garzik [Fri, 18 Apr 2008 23:22:58 +0000 (19:22 -0400)]
[IA64] minor irq handler cleanups
- remove unused 'irq' argument from pfm_do_interrupt_handler()
- remove pointless cast to void*
- add KERN_xxx prefix to printk()
- remove braces around singleton C statement
- in tioce_provider.c, start tioce_dma_consistent() and
tioce_error_intr_handler() function declarations in column 0
This change's main purpose is to prepare for the patchset in
jgarzik/misc-2.6.git#irq-remove, that explores removal of the
never-used 'irq' argument in each interrupt handler.
Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
There are many notify_die() and almost all take same style with
ia64_mca_spin(). This patch defines macros and replace them all,
to reduce lines and to improve readability.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
[IA64] disable interrupts on exit of ia64_trace_syscall
While testing with CONFIG_VIRT_CPU_ACCOUNTING=y, I found that
I occasionally get very huge system time in some threads.
So I dug the issue and finally noticed that it was caused
because of an interrupt which interrupt in the following window:
> [arch/ia64/kernel/entry.S: (!CONFIG_PREEMPT && CONFIG_VIRT_CPU_ACCOUNTING)]
>
> ENTRY(ia64_leave_syscall)
> :
> (pUStk) rsm psr.i
> cmp.eq pLvSys,p0=r0,r0 // pLvSys=1: leave from syscall
> (pUStk) cmp.eq.unc p6,p0=r0,r0 // p6 <- pUStk
> .work_processed_syscall:
> adds r2=PT(LOADRS)+16,r12
> (pUStk) mov.m r22=ar.itc // fetch time at leave
> adds r18=TI_FLAGS+IA64_TASK_SIZE,r13
> ;;
> <<< window: from here >>>
> (p6) ld4 r31=[r18] // load current_thread_info()->flags
> ld8 r19=[r2],PT(B6)-PT(LOADRS)
> adds r3=PT(AR_BSPSTORE)+16,r12
> ;;
> mov r16=ar.bsp
> ld8 r18=[r2],PT(R9)-PT(B6)
> (p6) and r15=TIF_WORK_MASK,r31 // any work other than TIF_SYSCALL_TRACE?
> ;;
> ld8 r23=[r3],PT(R11)-PT(AR_BSPSTORE)
> (p6) cmp4.ne.unc p6,p0=r15, r0 // any special work pending?
> (p6) br.cond.spnt .work_pending_syscall
> ;;
> ld8 r9=[r2],PT(CR_IPSR)-PT(R9)
> ld8 r11=[r3],PT(CR_IIP)-PT(R11)
> (pNonSys) break 0 // bug check: we shouldn't be here if pNonSys is TRUE!
> ;;
> invala
> <<< window: to here >>>
> rsm psr.i | psr.ic // turn off interrupts and interruption collection
If pUStk is true, it means we are going to return user mode, hence we fetch
ar.itc to get time at leave from system.
It seems that it is not possible to interrupt the window if pUStk is true,
because interrupts are disabled early. And also disabling interrupt makes
sense because it is safe for referring current_thread_info()->flags.
However interrupting the window while pUStk is true was possible.
The route was:
ia64_trace_syscall
-> .work_pending_syscall_end
-> .work_processed_syscall
Only in case entering the window from this route, interrupts are enabled
during in the window even if pUStk is true. I suppose interrupts must be
disabled here anyway if pUStk is true.
I'm not sure but afraid that what kind of bad effect were there, other
than crazy system time which I found.
FYI, there was a commit 6f6d75825dc49b082906b84537b4df28293c2977 that
points out a bug at same point(exit of ia64_trace_syscall) in 2006.
It can be said that there was an another bug.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
Robert Schedel [Fri, 11 Apr 2008 07:21:48 +0000 (09:21 +0200)]
HID: Suppress hidinput for Samsung IR control
Samsung USB remotes (0419:0001) report six keys via standard HID usage pages
(arrow keys, OK, Power). Kernel 2.6.25 maps those to input events (in addition
to the hiddev report). The remaining 43 keys are reported via proprietary HID
report page and therefore by hiddev only.
Applications using hiddev and input device might process the 6 standard keys
twice. To avoid this, the input device will be suppressed for the Samsung
remote with a quirk entry, forcing to use the hiddev device only.
LIRC already contains the proper support.
Signed-off-by: Robert Schedel <r.schedel@yahoo.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
projects / linux-2.6-omap-h63xx.git / log