V4L/DVB (10046): gspca - ov534: Use the gspca usb buf for usb control messages.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10045): gspca - ov534: Remove empty line in trace.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10044): gspca - pac7311: Webcam 093a:2620 added.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10041): m5602 - rework parts of the resolution initialization

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10040): m5602 - ov9650: Activate variopixel

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10039): m5602 - ov9650: Add CIF mode

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10038): m5602: tweak the hsync. Remove redundant init sequence

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10037): m5602: add QVGA mode for the ov9650 sensor

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10036): m5602 - ov9650: Prepare the sensor to set multiple resolutions

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10035): m5602: add a start sending hook in the sensor struct

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10034): m5602: fixup offset in order to align image

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10033): m5602: add some comments

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10032): m5602: add vflip quirk for Alienware m9700

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10031): m5602: correct the name of the Pascal Stangs library

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10030): m5602: Use read/modify/write when toggling vflip on the po1030

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10029): m5602: remove uneeded test on po1030

The po1030 never sends long i2c messages, no need to test for that in
the init phase.

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10028): mt5602: Remove the s5k83a specific read_sensor function

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10027): m5602: convert the s5k83a sensor to use the common function

Convert the s5k83a sensor to use the common read_sensor function

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10026): m5602: remove the s5k4aa implementation of the read_sensor

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10025): m5602: convert the s5k4aa sensor to use the common function

Convert the s5k4aa sensor to use the common read_sensor function

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10024): m5602: Remove the mt9m111 implementation of the read_sensor function.

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10023): m5602: Convert the mt9m111 to use the common read_sensor function

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10022): m5602: Remove the po1030 read_sensor function

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10021): m5602: Let the po1030 use the common read_sensor function

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10020): m5602: Remove the ov9650 implementation of the read sensor function

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10019): m5602: Let the ov9650 use the common read sensor function

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10018): gspca - m5602 - ov9650: Use generic read_sensor function

Toggle read sensor sequence depending on type of sensor. Check that no
more than max width of a sensor is read.

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10015): gspca - m5602: Add initial read sensor implementation

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10014): gspca - m5602: Remove all sensor specific write functions.

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10013): Convert all sensors to use the unified write sensor function

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10012): m5602: Start to unify read/write sensor functions

First step into unifying the read and write sensor functions

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10011): m5602: Remove the write and read sensor from the main struct

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10010): gspca - m5602: Add vflip quirk for the ASUS A6Ja

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10009): gspca - m5602: Convert some functions to be static

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10008): gspca - m5602: Checkpatch.pl fixes on m5602_ov9650.c

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10007): gspca - m5602: Refactor the error handling in the s5k83a

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10006): gspca - m5602: Align some defines

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10005): m5602: Cleanup the s5k4aa error handling, cull some comments

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10004): m5602: Cleanup the po1030 sensor error handling

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10003): m5602: Simplify the error handling in the ov9650 sensor

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10002): m5602: Simplify error handling in the mt9m111 sensor code

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10001): gspca - m5602: Minor fixes

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10000): gspca - m5602: Add lost ampersand

This restores the correct boolean expression

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9999): gspca - zc3xx: Webcam 046d:089d added.

Signed-off-by: Fabio Rossi <rossi.f@inwind.it>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9997): gspca - main: Don't lock the kernel on ioctl.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9995): gspca - ov534 and m5602: Set static some functions/variables.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9994): gspca: t613: Bad loop in om6802 reset.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9992): gspca - pac207: Webcam 093a:2461 added.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9991): gspca - main: Check if a buffer has been queued on streamon.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9990): gspca - main: Remove useless tests of the buffer type.

The buffer type is already checked in v4l2-ioctl.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9988): gspca - spca561: Separate the bridge and sensor tables of Rev72a

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9987): gspca - spca561: Control changes for Rev72a.

- move the rev12a sequence from setcontrast to end of start
- add the white balance control for rev72a
- adjust the contrast formula

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9986): gspca - spca561: Don't get the control values from the webcam.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9985): gspca - spca561: Cleanup source.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9984): gspca - pac7311: Webcam 093a:262c added.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9982): gspca - pac207: Update my email address.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9981): [PATCH] usb-urb.c: Fix initialization of URB list.

Fix the initialization of the URB list for a DVB-USB device to prevent
problems on certain platforms (MIPS).

Signed-off-by: Thomas Reitmayr <treitmayr@devbase.at>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9980): em28xx: simplify analog logic

Now, just two routines are enough for analog: the first one configs the analog
part and register V4L2 devices, and the second one release analog devices.

After this patch, it will be easier to transform em28xx-video into an em28xx
extension, loaded only on analog devices.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9979): em28xx: move usb probe code to a proper place

em28xx-video were holding several code that are not specific to V4L2
interface.

This patch moves the core code for em28xx-core, and usb probing code
into em28xx-cards.

This opens the possibility of breaking em28xx into a core module and a
V4L2 module, loaded only on devices that have analog interfaces.

Some cleanup may be done at em28xx-cards to optimize the config code.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9978): stkwebcam: Implement VIDIOC_ENUM_FRAMESIZES ioctl

This patch implements VIDIOC_ENUM_FRAMESIZES, it is used at least
by gstreamer.

Signed-off-by: Jaime Velasco Juan <jsagarribay@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9977): Kbuild: fix compilation when dib7000p is not defined

dib7000p.h defines a few extern symbols when CONFIG_DVB_DIB7000P is not set. since the
header is used on more than one driver, this causes symbol duplication, as pointed by
Ingo Molnar <mingo@elte.hu>:

drivers/media/dvb/built-in.o: In function `dib7000p_set_gpio':
(.text+0x3f242): multiple definition of `dib7000p_set_gpio'
drivers/media/video/built-in.o:(.text+0xb8c1e): first defined here
drivers/media/dvb/built-in.o: In function `dib7000p_i2c_enumeration':
(.text+0x3f282): multiple definition of `dib7000p_i2c_enumeration'
drivers/media/video/built-in.o:(.text+0xb8c3e): first defined here
drivers/media/dvb/built-in.o: In function `dib7000p_set_wbd_ref':
(.text+0x3f1c1): multiple definition of `dib7000p_set_wbd_ref'
drivers/media/video/built-in.o:(.text+0xb8bfe): first defined here
  LD      drivers/net/built-in.o
make[2]: *** [drivers/media/built-in.o] Error 1

Cc: Patrick Boettcher <patrick.boettcher@desy.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9975): ivtv: set v4l2_dev instead of parent.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9974): v4l2-dev: allow drivers to pass v4l2_device as parent

Drivers that use v4l2_device can set that as parent pointer in the v4l2_dev
field instead of using the struct device parent field.

This allows v4l2-dev.c to check whether this driver is v4l2_device based,
and if so then it can offer additional services.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9973): v4l2-dev: use the release callback from device instead of cdev

Instead of relying on the cdev release callback we should rely on the
release callback from the device struct. This requires that we use
get_device/put_device to do proper refcounting. In order to do this
safely v4l2-dev.c now sets up its own file_operations that call
out to the driver's ops.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9972): v4l: usbvideo, fix module ref count check

usbvideo_ClientIncModCount may return value < 0 in the case of error, not > 0.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9970): em28xx: Allow get/set registers for debug on i2c slave chips

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9969): tvp5150: add support for VIDIOC_G_CHIP_IDENT ioctl

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9967): cs5345: convert to v4l2_subdev and fix broken s_ctrl.

Converted to v4l2_subdev. While doing that I also discovered a stray 'break'
that broke the S_CTRL handling. Fixed that as well.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9966): tda9875: convert to v4l2_subdev.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9965): tda9840: convert to v4l2_subdev.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9964): tda7432: convert to v4l2_subdev.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9963): tlv320aic23b: convert to v4l2_subdev.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9962): tea6420: convert to v4l2_subdev.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9961): tea6415c: convert to v4l2_subdev.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9960): v4l2-subdev: ioctl ops should use unsigned for cmd arg.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9959): tvaudio: convert to v4l2_subdev.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9958): tvp5150: convert to v4l2_subdev.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9957): v4l2-subdev: add g_sliced_vbi_cap and add NULL pointer checks

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9953): em28xx: Add suport for debugging AC97 anciliary chips

The em28xx driver can be coupled to an anciliary AC97 chip. This patch
allows read/write AC97 registers directly.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9944): videodev2.h: fix typo.

The comment said CX2584X instead of CX2341X.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9943): v4l2: document video_device.

Add the missing video_device documentation to v4l2-framework.txt.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9942): v4l2-dev: check for parent device in get_index.

get_index requires a valid parent device in order to discover which
indices are in use. Some drivers (e.g. pvrusb2) do not set the parent
device. In that case just return 0.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9941): cx24113: fix compile warnings

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9940): bt832: remove this driver

The bt832 i2c driver was never used or even compiled and is no longer
maintained. It is now removed completely.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9939): tuner: fix tuner_ioctl compile error if V4L1 ioctls are disabled.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9937): cx18: Use a consistent crystal value for computing all PLL parameters

Use a consistent crystal value of 28.636360 MHz for computing all PLL
parameters so clocks don't have relative error due to assumed crystal
value mismatches.  Also aimed to have all PLLs run their VOCs at close to
400 MHz to minimze the error of these PLLs as frequency synthesizers. Also
set the VDCLK and AIMCLK PLLs to sane values before the APU and CPU firmware
are loaded.  Also fixed I2S Master clock dividers.

Many thanks to Mike Bradley and Jeff Campbell for reporting this problem and
suggesting the solution, researching and experimenting, and performing
extensive testing to support their suggested solution.

Reported-by: Jeff Campbell <jac1dlists@gmail.com>
Reported-by: Mike Bradley <mike.bradley@incanetworks.com>
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9936): cx18: Disable locking of Video and Audio PLL for analog captures

Disable AV_LOCK, locking of audio PLL to video PLL in the cx18-av-core for
analog captures.  It seems to have adverse effects on captures from
SVideo and CVBS sources with current clock & crystal settings in the driver.

Many thanks to Jeff Campbell and Mike Bradley for reporting this problem,
and suggesting the solution and performing extensive testing to support their
suggestion.

Reported-by: Jeff Campbell <jac1dlists@gmail.com>
Reported-by: Mike Bradley <mike.bradley@incanetworks.com>
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9934): v4l2-compat32: add two additional #ifdef __OLD_VIDIOC_ lines

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9932): v4l2-compat32: fix 32-64 compatibility module

Added all missing v4l1/2 ioctls and fix several broken conversions.
Partially based on work done by Cody Pisto <cpisto@gmail.com>.

Tested-by: Brandon Jenkins <bcjenkins@tvwhere.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9931): em28xx: de-obfuscate vidioc_g_ctrl logic

vidioc_g_ctrl() were using an uneeded confusing logic. Instead, use the
direct approach.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9930): em28xx: Fix bad locks on error condition

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9928): Convert GP8PSK module to use S2API

This patch converts the gp8psk module to use the S2API.
It pretends to be  DVB-S2 capable in order to allow the various
supported modulations (8PSK, QPSK-Turbo, etc), and keep software
compatibility with the S2API patches for Mythtv and VDR.

Signed-off by: Alan Nisota <alannisota@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9927): em28xx: use a more standard way to specify video formats

This patch uses the same code for enumberating video formats that are
present on cx88, bttv and saa7134 drivers.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9926): em28xx: Fix a bug that were putting xc2028/3028 tuner to sleep

The changeset 78aa52a159cf introduced a bug on em28xx: buffer setup should be
awaking xc3028. Instead, since we didn't specify the tuner mode, the device
were going to sleep, due to the lack of tuner mode when asking tuner to handle
VIDIOC_S_FREQUENCY:

xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
xc2028 0-0061: divisor= 00 00 14 d0 (freq=83.250)
xc2028 0-0061: Putting xc2028/3028 into poweroff mode.
xc2028 0-0061: Printing sleep stack trace:
Pid: 10936, comm: mplayer Tainted: P   M      2.6.27.8 #1

Call Trace:
 [<ffffffffa0b759ea>] xc2028_sleep+0x89/0x1ab [tuner_xc2028]
 [<ffffffffa0b48fb9>] tuner_s_frequency+0xf5/0x165 [tuner]

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9925): tuner-core: add debug msg's when asking tuner to sleep

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9923): xc5000: remove init_fw option

The init_fw option was broken for the HVR-950q because we would call the reset
callback inside of dvb_attach() and the callback had not been setup yet.

Michael Krufky (who added the init_fw feature) says it's no longer required,
so just remove the option completely.

Thanks to user Zzeiss from #linuxtv chat for reporting the issue and
Michael Krufky <mkrufky@linuxtv.org> for proposing the fix.

Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Acked-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9922): em28xx: don't assume every eb1a:2820 reference design is a Prolink PlayTV USB2

Don't operate under the assumption that every device that uses the em2820
default USB ID is a Prolink PlayTV USB.  We have an eeprom hash, so use that,
since otherwise we cannot support other devices with the 2820 default USB ID
(such as the ADS Tech Instant TV USB USBAV-704)

Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9921): em28xx: add chip id for em2874

Add the em2870 to the list of known em28xx chip ids.

Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9918): cx88: advise/acquire clean-up for HVR-1300/3000/4000

This cleans-up the advise/acquire methods.

This has been tested on the hvr-1300/4000 and assumed to be
correct on the hvr-3000.

This update also fixes analogue tuning on the hvr-1300
when in blackbird mode.

Signed-off-by: Darron Broad <darron@kewl.org>
Cc: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9917): cx24116: change to ALGO_HW

Slow tuning, EG:

> szap-s2 -r -c 39.FTATV "1=Pgm1;Net1"
reading channels from file '39.FTATV'
zapping to 3 '1=Pgm1;Net1':
delivery DVB-S, modulation QPSK
sat 0, frequency 11140 MHz V, symbolrate 1425000, coderate 5/6, rolloff 0.35
vpid 0x0200, apid 0x0300, sid 0x0001
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 00 | signal c2c0 | snr 0000 | ber 00012d4a | unc 00000000 |
status 03 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 03 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 |
status 03 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 03 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 |
status 03 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 |
status 1f | signal c040 | snr bb33 | ber 00000000 | unc 00000000 | FE_HAS_LOCK

Appears to be resolved by dropping zig-zag tuning and relying on
hardware only:

> szap-s2 -r -c 39.FTATV "1=Pgm1;Net1"
reading channels from file '39.FTATV'
zapping to 3 '1=Pgm1;Net1':
delivery DVB-S, modulation QPSK
sat 0, frequency 11140 MHz V, symbolrate 1425000, coderate 5/6, rolloff 0.35
vpid 0x0200, apid 0x0300, sid 0x0001
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 1f | signal ff80 | snr c199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal c040 | snr c199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal ff80 | snr c199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK

Tuning to a weaker channel shows that the hardware recovers sync:

status 1f | signal fe40 | snr 5199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 03 | signal fd40 | snr 5000 | ber 00000000 | unc 00000000 |
status 1f | signal fe40 | snr 5000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 03 | signal fd80 | snr 5000 | ber 00000000 | unc 00000000 |
status 01 | signal fd80 | snr 4e66 | ber 00000000 | unc 00000000 |
status 1f | signal fe40 | snr 5000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 03 | signal fe40 | snr 5000 | ber 00000000 | unc 00000000 |
status 01 | signal fd80 | snr 0000 | ber 00000000 | unc 00000000 |
status 1f | signal fe40 | snr 5199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK

Also, tuning, moving the dish and then restoring the dish also retunes.

Signed-off-by: Darron Broad <darron@kewl.org>
Cc: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>