From: Felipe Balbi Date: Tue, 30 Sep 2008 18:42:49 +0000 (+0300) Subject: i2c: move twl4030-usb to platform_device X-Git-Tag: v2.6.27-omap1~121 X-Git-Url: http://www.pilppa.org/gitweb/gitweb.cgi?a=commitdiff_plain;h=fde13f8fc7de977e71304fd500fed029b41ceb19;p=linux-2.6-omap-h63xx.git i2c: move twl4030-usb to platform_device use new style twl4030-core to register a platform_device for twl4030-usb. Signed-off-by: Felipe Balbi Signed-off-by: Tony Lindgren --- diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 8c4c9dd4434..30735285138 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -344,12 +344,18 @@ static struct omap_board_config_kernel sdp2430_config[] __initdata = { {OMAP_TAG_SERIAL_CONSOLE, &sdp2430_serial_console_config}, }; + +static struct twl4030_usb_data sdp2430_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + static struct twl4030_platform_data sdp2430_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, /* platform_data for children goes here */ .keypad = &sdp2430_kp_data, + .usb = &sdp2430_usb_data, }; static struct i2c_board_info __initdata sdp2430_i2c_boardinfo[] = { diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index fe1ba4e8767..e0c39c2ada5 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -300,12 +300,17 @@ static struct omap_board_config_kernel sdp3430_config[] __initdata = { { OMAP_TAG_LCD, &sdp3430_lcd_config }, }; +static struct twl4030_usb_data sdp3430_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + static struct twl4030_platform_data sdp3430_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, /* platform_data for children goes here */ .keypad = &sdp3430_kp_data, + .usb = &sdp3430_usb_data, }; static struct i2c_board_info __initdata sdp3430_i2c_boardinfo[] = { diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index c07c7129123..219579b95e9 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -183,9 +183,16 @@ static struct omap_board_config_kernel ldp_config[] __initdata = { { OMAP_TAG_UART, &ldp_uart_config }, }; +static struct twl4030_usb_data ldp_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + static struct twl4030_platform_data ldp_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, + + /* platform_data for children goes here */ + .usb = &ldp_usb_data, }; static struct i2c_board_info __initdata ldp_i2c_boardinfo[] = { diff --git a/arch/arm/mach-omap2/board-omap2evm.c b/arch/arm/mach-omap2/board-omap2evm.c index d2a3743ce6a..be8348d7be6 100644 --- a/arch/arm/mach-omap2/board-omap2evm.c +++ b/arch/arm/mach-omap2/board-omap2evm.c @@ -226,12 +226,17 @@ static struct omap_board_config_kernel omap2_evm_config[] __initdata = { { OMAP_TAG_LCD, &omap2_evm_lcd_config }, }; +static struct twl4030_usb_data omap2evm_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + static struct twl4030_platform_data omap2evm_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, /* platform_data for children goes here */ .keypad = &omap2evm_kp_data, + .usb = &omap2evm_usb_data, }; static struct i2c_board_info __initdata omap2evm_i2c_boardinfo[] = { diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index fa8f5f64e3e..ae677b991ba 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -110,9 +110,16 @@ static struct omap_uart_config omap3_beagle_uart_config __initdata = { .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), }; +static struct twl4030_usb_data beagle_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + static struct twl4030_platform_data beagle_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, + + /* platform_data for children goes here */ + .usb = &beagle_usb_data, }; static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = { diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index c4a969d3d50..158138c25dc 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -90,6 +90,10 @@ static struct omap_uart_config omap3_evm_uart_config __initdata = { .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), }; +static struct twl4030_usb_data omap3evm_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + static int omap3evm_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_RIGHT), @@ -118,13 +122,13 @@ static struct twl4030_keypad_data omap3evm_kp_data = { .irq = TWL4030_MODIRQ_KEYPAD, }; - static struct twl4030_platform_data omap3evm_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, /* platform_data for children goes here */ .keypad = &omap3evm_kp_data, + .usb = &omap3evm_usb_data, }; static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = { diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index a41e6faace6..2e6d2c7d457 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -146,9 +146,14 @@ static struct omap_uart_config overo_uart_config __initdata = { .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), }; +static struct twl4030_usb_data overo_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + static struct twl4030_platform_data overo_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, + .usb = &overo_usb_data, }; static struct i2c_board_info __initdata overo_i2c_boardinfo[] = { diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index e91be601d69..121aec99fe0 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -186,22 +186,6 @@ config TWL4030_USB tristate "TWL4030 USB Transceiver Driver" depends on TWL4030_CORE -choice - prompt "Transceiver mode" - depends on TWL4030_USB - help - TWL4030 USB transceiver can operate in various - mutually-exclusive modes. Select one of them. - -config TWL4030_USB_HS_ULPI - depends on TWL4030_USB - bool "High-speed ULPI" - help - Say Y here if the TWL4030 is connected to high-speed USB - controller through a ULPI interface. - -endchoice - config TWL4030_PWRBUTTON tristate "TWL4030 Power button Driver" depends on TWL4030_CORE diff --git a/drivers/i2c/chips/twl4030-core.c b/drivers/i2c/chips/twl4030-core.c index 0a2d8fe0220..02be771a922 100644 --- a/drivers/i2c/chips/twl4030-core.c +++ b/drivers/i2c/chips/twl4030-core.c @@ -57,6 +57,12 @@ #define twl_has_keypad() false #endif +#if defined(CONFIG_TWL4030_USB) || defined(CONFIG_TWL4030_USB_MODULE) +#define twl_has_usb() true +#else +#define twl_has_usb() false +#endif + /* Primary Interrupt Handler on TWL4030 Registers */ /* Register Definitions */ @@ -701,6 +707,27 @@ static int add_children(struct twl4030_platform_data *pdata) } } + if (twl_has_usb() && pdata->usb) { + pdev = platform_device_alloc("twl4030_usb", -1); + if (pdev) { + twl = &twl4030_modules[TWL4030_SLAVENUM_NUM0]; + pdev->dev.parent = &twl->client->dev; + device_init_wakeup(&pdev->dev, 1); + status = platform_device_add_data(pdev, pdata->usb, + sizeof(*pdata->usb)); + if (status < 0) { + platform_device_put(pdev); + goto err; + } + status = platform_device_add(pdev); + if (status < 0) + platform_device_put(pdev); + } else { + status = -ENOMEM; + goto err; + } + } + err: pr_err("failed to add twl4030's children\n"); return status; diff --git a/drivers/i2c/chips/twl4030-usb.c b/drivers/i2c/chips/twl4030-usb.c index 2906b82cebb..246aa9d1de6 100644 --- a/drivers/i2c/chips/twl4030-usb.c +++ b/drivers/i2c/chips/twl4030-usb.c @@ -2,6 +2,8 @@ * twl4030_usb - TWL4030 USB transceiver, talking to OMAP OTG controller * * Copyright (C) 2004-2007 Texas Instruments + * Copyright (C) 2008 Nokia Corporation + * Contact: Felipe Balbi * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -22,11 +24,11 @@ * - 3-pin mode support may be added in future. */ - #include #include #include #include +#include #include #include #include @@ -228,14 +230,6 @@ #define VUSB3V1_TYPE 0x78 #define VUSB3V1_REMAP 0x79 -#define ID_STATUS 0x96 -#define ID_RES_FLOAT (1 << 4) /* mini-B */ -#define ID_RES_440K (1 << 3) /* type 2 charger */ -#define ID_RES_200K (1 << 2) /* 5-wire carkit or - type 1 charger */ -#define ID_RES_102K (1 << 1) /* phone */ -#define ID_RES_GND (1 << 0) /* mini-A */ - /* In module TWL4030_MODULE_INTBR */ #define PMBR1 0x0D #define GPIO_USB_4PIN_ULPI_2430C (3 << 0) @@ -250,11 +244,7 @@ #define REG_PWR_SIH_CTRL 0x07 #define COR (1 << 2) -/* internal define on top of container_of */ -#define xceiv_to_twl(x) container_of((x), struct twl4030_usb, otg); - /* bits in OTG_CTRL */ - #define OTG_XCEIV_OUTPUTS \ (OTG_ASESSVLD|OTG_BSESSEND|OTG_BSESSVLD|OTG_VBUSVLD|OTG_ID) #define OTG_XCEIV_INPUTS \ @@ -268,22 +258,23 @@ OTG_CTRL_BITS) -/*-------------------------------------------------------------------------*/ - struct twl4030_usb { struct otg_transceiver otg; + struct device *dev; + + /* pin configuration */ + enum twl4030_usb_mode usb_mode; int irq; - u8 usb_mode; /* pin configuration */ -#define T2_USB_MODE_ULPI 1 -/* #define T2_USB_MODE_CEA2011_3PIN 2 */ u8 asleep; }; -static struct twl4030_usb *the_transceiver; +/* internal define on top of container_of */ +#define xceiv_to_twl(x) container_of((x), struct twl4030_usb, otg); /*-------------------------------------------------------------------------*/ -static int twl4030_i2c_write_u8_verify(u8 module, u8 data, u8 address) +static int twl4030_i2c_write_u8_verify(struct twl4030_usb *twl, + u8 module, u8 data, u8 address) { u8 check; @@ -297,46 +288,51 @@ static int twl4030_i2c_write_u8_verify(u8 module, u8 data, u8 address) (check == data)) return 0; /* Failed again: Return error */ + return -EBUSY; } -#define twl4030_usb_write_verify(address, data) \ - twl4030_i2c_write_u8_verify(TWL4030_MODULE_USB, (data), (address)) +#define twl4030_usb_write_verify(twl, address, data) \ + twl4030_i2c_write_u8_verify(twl, TWL4030_MODULE_USB, (data), (address)) -static inline int twl4030_usb_write(u8 address, u8 data) +static inline int twl4030_usb_write(struct twl4030_usb *twl, + u8 address, u8 data) { int ret = 0; + ret = twl4030_i2c_write_u8(TWL4030_MODULE_USB, data, address); if (ret >= 0) { #if 0 /* debug */ u8 data1; if (twl4030_i2c_read_u8(TWL4030_MODULE_USB, &data1, address) < 0) - printk(KERN_ERR "re-read failed\n"); + dev_err(twl->dev, "re-read failed\n"); else - printk(KERN_INFO + dev_dbg(twl->dev, "Write %s wrote %x read %x from reg %x\n", (data1 == data) ? "succeed" : "mismatch", data, data1, address); #endif } else { - printk(KERN_WARNING + dev_warn(twl->dev, "TWL4030:USB:Write[0x%x] Error %d\n", address, ret); } + return ret; } -static inline int twl4030_usb_read(u8 address) +static inline int twl4030_usb_read(struct twl4030_usb *twl, u8 address) { u8 data; int ret = 0; + ret = twl4030_i2c_read_u8(TWL4030_MODULE_USB, &data, address); - if (ret >= 0) { + if (ret >= 0) ret = data; - } else { - printk(KERN_WARNING + else + dev_warn(twl->dev, "TWL4030:USB:Read[0x%x] Error %d\n", address, ret); - } + return ret; } @@ -345,14 +341,13 @@ static inline int twl4030_usb_read(u8 address) static inline int twl4030_usb_set_bits(struct twl4030_usb *twl, u8 reg, u8 bits) { - return twl4030_usb_write(reg + 1, bits); + return twl4030_usb_write(twl, reg + 1, bits); } static inline int twl4030_usb_clear_bits(struct twl4030_usb *twl, u8 reg, u8 bits) { - return twl4030_usb_write(reg + 2, bits); - + return twl4030_usb_write(twl, reg + 2, bits); } /*-------------------------------------------------------------------------*/ @@ -380,185 +375,130 @@ static void twl4030_usb_set_mode(struct twl4030_usb *twl, int mode) }; } -#ifdef CONFIG_TWL4030_USB_HS_ULPI -static void hs_usb_init(struct twl4030_usb *twl) -{ - twl->usb_mode = T2_USB_MODE_ULPI; - return; -} - -#endif - -static void twl4030_i2c_access(int on) +static void twl4030_i2c_access(struct twl4030_usb *twl, int on) { unsigned long timeout; - int val = twl4030_usb_read(PHY_CLK_CTRL); + int val = twl4030_usb_read(twl, PHY_CLK_CTRL); if (val >= 0) { if (on) { /* enable DPLL to access PHY registers over I2C */ val |= REQ_PHY_DPLL_CLK; - if (twl4030_usb_write_verify(PHY_CLK_CTRL, - (u8)val) < 0) { - printk(KERN_ERR "twl4030_usb: i2c write failed," - " line %d\n", __LINE__); - return; - } + WARN_ON(twl4030_usb_write_verify(twl, PHY_CLK_CTRL, + (u8)val) < 0); timeout = jiffies + HZ; - while (!(twl4030_usb_read(PHY_CLK_CTRL_STS) & + while (!(twl4030_usb_read(twl, PHY_CLK_CTRL_STS) & PHY_DPLL_CLK) && time_before(jiffies, timeout)) udelay(10); - if (!(twl4030_usb_read(PHY_CLK_CTRL_STS) & + if (!(twl4030_usb_read(twl, PHY_CLK_CTRL_STS) & PHY_DPLL_CLK)) - printk(KERN_ERR "Timeout setting T2 HSUSB " + dev_err(twl->dev, "Timeout setting T2 HSUSB " "PHY DPLL clock\n"); } else { /* let ULPI control the DPLL clock */ val &= ~REQ_PHY_DPLL_CLK; - if (twl4030_usb_write_verify(PHY_CLK_CTRL, - (u8)val) < 0) { - printk(KERN_ERR "twl4030_usb: i2c write failed," - " line %d\n", __LINE__); - } + WARN_ON(twl4030_usb_write_verify(twl, PHY_CLK_CTRL, + (u8)val) < 0); } } - return; } -static void usb_irq_enable(int rising, int falling) +static void usb_irq_enable(struct twl4030_usb *twl, int rising, int falling) { u8 val; /* edge setup */ - if (twl4030_i2c_read_u8(TWL4030_MODULE_INT, &val, REG_PWR_EDR1) < 0) { - printk(KERN_ERR "twl4030_usb: i2c read failed," - " line %d\n", __LINE__); - return; - } + WARN_ON(twl4030_i2c_read_u8(TWL4030_MODULE_INT, + &val, REG_PWR_EDR1) < 0); + val &= ~(USB_PRES_RISING | USB_PRES_FALLING); if (rising) val = val | USB_PRES_RISING; if (falling) val = val | USB_PRES_FALLING; - if (twl4030_i2c_write_u8_verify(TWL4030_MODULE_INT, val, - REG_PWR_EDR1) < 0) { - printk(KERN_ERR "twl4030_usb: i2c write failed," - " line %d\n", __LINE__); - return; - } + WARN_ON(twl4030_i2c_write_u8_verify(twl, TWL4030_MODULE_INT, + val, REG_PWR_EDR1) < 0); /* un-mask interrupt */ - if (twl4030_i2c_read_u8(TWL4030_MODULE_INT, &val, REG_PWR_IMR1) < 0) { - printk(KERN_ERR "twl4030_usb: i2c read failed," - " line %d\n", __LINE__); - return; - } + WARN_ON(twl4030_i2c_read_u8(TWL4030_MODULE_INT, + &val, REG_PWR_IMR1) < 0); + val &= ~USB_PRES; - if (twl4030_i2c_write_u8_verify(TWL4030_MODULE_INT, val, - REG_PWR_IMR1) < 0) - printk(KERN_ERR "twl4030_usb: i2c write failed," - " line %d\n", __LINE__); - return; + WARN_ON(twl4030_i2c_write_u8_verify(twl, TWL4030_MODULE_INT, + val, REG_PWR_IMR1) < 0); } -static void usb_irq_disable(void) +static void usb_irq_disable(struct twl4030_usb *twl) { u8 val; /* undo edge setup */ - if (twl4030_i2c_read_u8(TWL4030_MODULE_INT, &val, REG_PWR_EDR1) < 0) { - printk(KERN_ERR "twl4030_usb: i2c read failed," - " line %d\n", __LINE__); - return; - } + WARN_ON(twl4030_i2c_read_u8(TWL4030_MODULE_INT, + &val, REG_PWR_EDR1) < 0); val &= ~(USB_PRES_RISING | USB_PRES_FALLING); - if (twl4030_i2c_write_u8_verify(TWL4030_MODULE_INT, val, - REG_PWR_EDR1) < 0) { - printk(KERN_ERR "twl4030_usb: i2c write failed," - " line %d\n", __LINE__); - return; - } + WARN_ON(twl4030_i2c_write_u8_verify(twl, TWL4030_MODULE_INT, + val, REG_PWR_EDR1) < 0); /* mask interrupt */ - if (twl4030_i2c_read_u8(TWL4030_MODULE_INT, &val, REG_PWR_IMR1) < 0) { - printk(KERN_ERR "twl4030_usb: i2c read failed," - " line %d\n", __LINE__); - return; - } + WARN_ON(twl4030_i2c_read_u8(TWL4030_MODULE_INT, + &val, REG_PWR_IMR1) < 0); val |= USB_PRES; - if (twl4030_i2c_write_u8_verify(TWL4030_MODULE_INT, val, - REG_PWR_IMR1) < 0) - printk(KERN_ERR "twl4030_usb: i2c write failed," - " line %d\n", __LINE__); - return; + WARN_ON(twl4030_i2c_write_u8_verify(twl, TWL4030_MODULE_INT, + val, REG_PWR_IMR1) < 0); } static void twl4030_phy_power(struct twl4030_usb *twl, int on) { u8 pwr; - pwr = twl4030_usb_read(PHY_PWR_CTRL); + pwr = twl4030_usb_read(twl, PHY_PWR_CTRL); if (on) { pwr &= ~PHY_PWR_PHYPWD; - if (twl4030_usb_write_verify(PHY_PWR_CTRL, pwr) < 0) { - printk(KERN_ERR "twl4030_usb: i2c write failed," - " line %d\n", __LINE__); - return; - } - twl4030_usb_write(PHY_CLK_CTRL, - twl4030_usb_read(PHY_CLK_CTRL) | + WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0); + twl4030_usb_write(twl, PHY_CLK_CTRL, + twl4030_usb_read(twl, PHY_CLK_CTRL) | (PHY_CLK_CTRL_CLOCKGATING_EN | PHY_CLK_CTRL_CLK32K_EN)); } else { pwr |= PHY_PWR_PHYPWD; - if (twl4030_usb_write_verify(PHY_PWR_CTRL, pwr) < 0) { - printk(KERN_ERR "twl4030_usb: i2c write failed," - " line %d\n", __LINE__); - } + WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0); } - return; } -static void twl4030_phy_suspend(int controller_off) +static void twl4030_phy_suspend(struct twl4030_usb *twl, int controller_off) { - struct twl4030_usb *twl = the_transceiver; - if (controller_off) - usb_irq_disable(); + usb_irq_disable(twl); if (twl->asleep) return; if (!controller_off) /* enable rising edge interrupt to detect cable attach */ - usb_irq_enable(1, 0); + usb_irq_enable(twl, 1, 0); twl4030_phy_power(twl, 0); twl->asleep = 1; - return; } -static void twl4030_phy_resume(void) +static void twl4030_phy_resume(struct twl4030_usb *twl) { - struct twl4030_usb *twl = the_transceiver; - if (!twl->asleep) return; /* enable falling edge interrupt to detect cable detach */ - usb_irq_enable(0, 1); + usb_irq_enable(twl, 0, 1); twl4030_phy_power(twl, 1); - twl4030_i2c_access(1); + twl4030_i2c_access(twl, 1); twl4030_usb_set_mode(twl, twl->usb_mode); if (twl->usb_mode == T2_USB_MODE_ULPI) - twl4030_i2c_access(0); + twl4030_i2c_access(twl, 0); twl->asleep = 0; - return; } static void twl4030_usb_ldo_init(struct twl4030_usb *twl) @@ -591,59 +531,57 @@ static void twl4030_usb_ldo_init(struct twl4030_usb *twl) static irqreturn_t twl4030_usb_irq(int irq, void *_twl) { - int ret = IRQ_NONE; + struct twl4030_usb *twl = _twl; u8 val; /* action based on cable attach or detach */ - if (twl4030_i2c_read_u8(TWL4030_MODULE_INT, &val, REG_PWR_EDR1) < 0) { - printk(KERN_ERR "twl4030_usb: i2c read failed," - " line %d\n", __LINE__); - goto done; - } + WARN_ON(twl4030_i2c_read_u8(TWL4030_MODULE_INT, + &val, REG_PWR_EDR1) < 0); if (val & USB_PRES_RISING) { - twl4030_phy_resume(); + twl4030_phy_resume(twl); twl4030charger_usb_en(1); } else { twl4030charger_usb_en(0); - twl4030_phy_suspend(0); + twl4030_phy_suspend(twl, 0); } - ret = IRQ_HANDLED; - -done: - return ret; + return IRQ_HANDLED; } static int twl4030_set_suspend(struct otg_transceiver *x, int suspend) { + struct twl4030_usb *twl = xceiv_to_twl(x); + if (suspend) - twl4030_phy_suspend(1); + twl4030_phy_suspend(twl, 1); else - twl4030_phy_resume(); + twl4030_phy_resume(twl); return 0; } -static int twl4030_set_peripheral(struct otg_transceiver *xceiv, +static int twl4030_set_peripheral(struct otg_transceiver *x, struct usb_gadget *gadget) { + struct twl4030_usb *twl; u32 l; - struct twl4030_usb *twl = xceiv_to_twl(xceiv); - if (!xceiv) + if (!x) return -ENODEV; + twl = xceiv_to_twl(x); + if (!gadget) { omap_writew(0, OTG_IRQ_EN); - twl4030_phy_suspend(1); + twl4030_phy_suspend(twl, 1); twl->otg.gadget = NULL; return -ENODEV; } twl->otg.gadget = gadget; - twl4030_phy_resume(); + twl4030_phy_resume(twl); l = omap_readl(OTG_CTRL) & OTG_CTRL_MASK; l &= ~(OTG_XCEIV_OUTPUTS|OTG_CTRL_BITS); @@ -660,23 +598,25 @@ static int twl4030_set_peripheral(struct otg_transceiver *xceiv, return 0; } -static int twl4030_set_host(struct otg_transceiver *xceiv, struct usb_bus *host) +static int twl4030_set_host(struct otg_transceiver *x, struct usb_bus *host) { - struct twl4030_usb *twl = xceiv_to_twl(xceiv); + struct twl4030_usb *twl; - if (!xceiv) + if (!x) return -ENODEV; + twl = xceiv_to_twl(x); + if (!host) { omap_writew(0, OTG_IRQ_EN); - twl4030_phy_suspend(1); + twl4030_phy_suspend(twl, 1); twl->otg.host = NULL; return -ENODEV; } twl->otg.host = host; - twl4030_phy_resume(); + twl4030_phy_resume(twl); twl4030_usb_set_bits(twl, TWL4030_OTG_CTRL, TWL4030_OTG_CTRL_DMPULLDOWN @@ -689,63 +629,63 @@ static int twl4030_set_host(struct otg_transceiver *xceiv, struct usb_bus *host) return 0; } -static int __init twl4030_usb_init(void) +static int __init twl4030_usb_probe(struct platform_device *pdev) { + struct twl4030_usb_data *pdata = pdev->dev.platform_data; struct twl4030_usb *twl; int status; - if (the_transceiver) - return 0; - twl = kzalloc(sizeof *twl, GFP_KERNEL); if (!twl) - return 0; + return -ENOMEM; - the_transceiver = twl; + if (!pdata) { + dev_info(&pdev->dev, "platform_data not available\n"); + return -EINVAL; + } + twl->dev = &pdev->dev; twl->irq = TWL4030_PWRIRQ_USB_PRES; twl->otg.set_host = twl4030_set_host; twl->otg.set_peripheral = twl4030_set_peripheral; twl->otg.set_suspend = twl4030_set_suspend; + twl->usb_mode = pdata->usb_mode; - usb_irq_disable(); + usb_irq_disable(twl); status = request_irq(twl->irq, twl4030_usb_irq, 0, "twl4030_usb", twl); if (status < 0) { - printk(KERN_DEBUG "can't get IRQ %d, err %d\n", + dev_dbg(&pdev->dev, "can't get IRQ %d, err %d\n", twl->irq, status); kfree(twl); - return -ENODEV; + return status; } -#if defined(CONFIG_TWL4030_USB_HS_ULPI) - hs_usb_init(twl); -#endif + twl4030_usb_ldo_init(twl); twl4030_phy_power(twl, 1); - twl4030_i2c_access(1); + twl4030_i2c_access(twl, 1); twl4030_usb_set_mode(twl, twl->usb_mode); - if (twl->usb_mode == T2_USB_MODE_ULPI) - twl4030_i2c_access(0); twl->asleep = 0; - if (twl->usb_mode == T2_USB_MODE_ULPI) - twl4030_phy_suspend(1); + if (twl->usb_mode == T2_USB_MODE_ULPI) { + twl4030_i2c_access(twl, 0); + twl4030_phy_suspend(twl, 0); + } otg_set_transceiver(&twl->otg); - - printk(KERN_INFO "Initialized TWL4030 USB module\n"); + platform_set_drvdata(pdev, twl); + dev_info(&pdev->dev, "Initialized TWL4030 USB module\n"); return 0; } - -static void __exit twl4030_usb_exit(void) +static int __exit twl4030_usb_remove(struct platform_device *pdev) { - struct twl4030_usb *twl = the_transceiver; + struct twl4030_usb *twl = platform_get_drvdata(pdev); int val; - usb_irq_disable(); + usb_irq_disable(twl); free_irq(twl->irq, twl); /* set transceiver mode to power on defaults */ @@ -755,11 +695,11 @@ static void __exit twl4030_usb_exit(void) * clear dpll clock request for i2c access, * disable 32KHz */ - val = twl4030_usb_read(PHY_CLK_CTRL); + val = twl4030_usb_read(twl, PHY_CLK_CTRL); if (val >= 0) { val |= PHY_CLK_CTRL_CLOCKGATING_EN; val &= ~(PHY_CLK_CTRL_CLK32K_EN | REQ_PHY_DPLL_CLK); - twl4030_usb_write(PHY_CLK_CTRL, (u8)val); + twl4030_usb_write(twl, PHY_CLK_CTRL, (u8)val); } /* disable complete OTG block */ @@ -768,12 +708,32 @@ static void __exit twl4030_usb_exit(void) twl4030_phy_power(twl, 0); kfree(twl); + + return 0; } -subsys_initcall(twl4030_usb_init); +static struct platform_driver twl4030_driver = { + .probe = twl4030_usb_probe, + .remove = __exit_p(twl4030_remove), + .driver = { + .name = "twl4030_usb", + .owner = THIS_MODULE, + }, +}; + +static int __init twl4030_usb_init(void) +{ + return platform_driver_register(&twl4030_driver); +} +module_init(twl4030_usb_init); + +static void __exit twl4030_usb_exit(void) +{ + platform_driver_unregister(&twl4030_driver); +} module_exit(twl4030_usb_exit); -MODULE_ALIAS("i2c:twl4030-usb"); -MODULE_AUTHOR("Texas Instruments, Inc."); +MODULE_ALIAS("platform:twl4030_usb"); +MODULE_AUTHOR("Texas Instruments, Inc, Nokia Corporation"); MODULE_DESCRIPTION("TWL4030 USB transceiver driver"); MODULE_LICENSE("GPL"); diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h index 0ac417cec3a..8a12ff0cbc5 100644 --- a/include/linux/i2c/twl4030.h +++ b/include/linux/i2c/twl4030.h @@ -61,9 +61,19 @@ struct twl4030_keypad_data { unsigned int rep:1; }; +enum twl4030_usb_mode { + T2_USB_MODE_ULPI = 1, + T2_USB_MODE_CEA2011_3PIN = 2, +}; + +struct twl4030_usb_data { + enum twl4030_usb_mode usb_mode; +}; + struct twl4030_platform_data { unsigned irq_base, irq_end; struct twl4030_keypad_data *keypad; + struct twl4030_usb_data *usb; /* REVISIT more to come ... _nothing_ should be hard-wired */ };