From: Robert P. J. Day <rpjday@crashcourse.ca>
Date: Sat, 26 Apr 2008 17:46:31 +0000 (-0400)
Subject: [MTD] Delete long-unused jedec.h header file.
X-Git-Tag: v2.6.26-rc1~19^2~5
X-Git-Url: http://www.pilppa.org/gitweb/gitweb.cgi?a=commitdiff_plain;h=fb96c00819c28860fd10137f1c63f7c48dec252b;p=linux-2.6-omap-h63xx.git

[MTD] Delete long-unused jedec.h header file.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---

diff --git a/include/linux/mtd/jedec.h b/include/linux/mtd/jedec.h
deleted file mode 100644
index 9006feb218b..00000000000
--- a/include/linux/mtd/jedec.h
+++ /dev/null
@@ -1,66 +0,0 @@
-
-/* JEDEC Flash Interface.
- * This is an older type of interface for self programming flash. It is
- * commonly use in older AMD chips and is obsolete compared with CFI.
- * It is called JEDEC because the JEDEC association distributes the ID codes
- * for the chips.
- *
- * See the AMD flash databook for information on how to operate the interface.
- *
- * $Id: jedec.h,v 1.4 2005/11/07 11:14:54 gleixner Exp $
- */
-
-#ifndef __LINUX_MTD_JEDEC_H__
-#define __LINUX_MTD_JEDEC_H__
-
-#include <linux/types.h>
-
-#define MAX_JEDEC_CHIPS 16
-
-// Listing of all supported chips and their information
-struct JEDECTable
-{
-   __u16 jedec;
-   char *name;
-   unsigned long size;
-   unsigned long sectorsize;
-   __u32 capabilities;
-};
-
-// JEDEC being 0 is the end of the chip array
-struct jedec_flash_chip
-{
-   __u16 jedec;
-   unsigned long size;
-   unsigned long sectorsize;
-
-   // *(__u8*)(base + (adder << addrshift)) = data << datashift
-   // Address size = size << addrshift
-   unsigned long base;           // Byte 0 of the flash, will be unaligned
-   unsigned int datashift;       // Useful for 32bit/16bit accesses
-   unsigned int addrshift;
-   unsigned long offset;         // linerized start. base==offset for unbanked, uninterleaved flash
-
-   __u32 capabilities;
-
-   // These markers are filled in by the flash_chip_scan function
-   unsigned long start;
-   unsigned long length;
-};
-
-struct jedec_private
-{
-   unsigned long size;         // Total size of all the devices
-
-   /* Bank handling. If sum(bank_fill) == size then this is linear flash.
-      Otherwise the mapping has holes in it. bank_fill may be used to
-      find the holes, but in the common symetric case
-      bank_fill[0] == bank_fill[*], thus addresses may be computed
-      mathmatically. bank_fill must be powers of two */
-   unsigned is_banked;
-   unsigned long bank_fill[MAX_JEDEC_CHIPS];
-
-   struct jedec_flash_chip chips[MAX_JEDEC_CHIPS];
-};
-
-#endif