From: Rafael J. Wysocki Date: Sat, 27 Dec 2008 15:30:52 +0000 (+0100) Subject: PCI PM: Fix pci_update_current_state X-Git-Tag: v2.6.29-rc1~181^2~38 X-Git-Url: http://www.pilppa.org/gitweb/gitweb.cgi?a=commitdiff_plain;h=f06fc0b6f8a6846e0ad48aee7b0f282b4fb5dcdc;p=linux-2.6-omap-h63xx.git PCI PM: Fix pci_update_current_state Currently, PCI devices without the PM capability that are power manageable by the platform (eg. ACPI) are not handled correctly by pci_set_power_state(), because their current_state field is not updated to reflect the new power state of the device. Fix this by making pci_update_current_state() accept additional argument representing the power state of the device as set by the platform. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 1b807330e50..9d2aa6366fd 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -525,14 +525,17 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) * pci_update_current_state - Read PCI power state of given device from its * PCI PM registers and cache it * @dev: PCI device to handle. + * @state: State to cache in case the device doesn't have the PM capability */ -static void pci_update_current_state(struct pci_dev *dev) +static void pci_update_current_state(struct pci_dev *dev, pci_power_t state) { if (dev->pm_cap) { u16 pmcsr; pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK); + } else { + dev->current_state = state; } } @@ -575,7 +578,7 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state) */ int ret = platform_pci_set_power_state(dev, PCI_D0); if (!ret) - pci_update_current_state(dev); + pci_update_current_state(dev, PCI_D0); } /* This device is quirked not to be put into D3, so don't put it in D3 */ @@ -588,7 +591,7 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state) /* Allow the platform to finalize the transition */ int ret = platform_pci_set_power_state(dev, state); if (!ret) { - pci_update_current_state(dev); + pci_update_current_state(dev, state); error = 0; } }