From: Sergei Shtylyov Date: Fri, 17 Oct 2008 16:09:16 +0000 (+0200) Subject: sgiioc4: remove maskproc() method X-Git-Tag: v2.6.28-rc1~83^2~7 X-Git-Url: http://www.pilppa.org/gitweb/gitweb.cgi?a=commitdiff_plain;h=ea656980f40d599400d2306b23f2fbc707ae7313;p=linux-2.6-omap-h63xx.git sgiioc4: remove maskproc() method Since the maskproc() method calls either mirror the interrupt en/disable via the nIEN bit of the device control register done by the IDE core before issuing a command or unmask the interrupt after a command executed in polled mode (when interrupt is already not expected), it is pointless to implement this method by manipulating the nIEN bit... Signed-off-by: Sergei Shtylyov Cc: jeremy@sgi.com Signed-off-by: Bartlomiej Zolnierkiewicz --- diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c index dd634541ce3..8581789352a 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/pci/sgiioc4.c @@ -108,13 +108,6 @@ sgiioc4_init_hwif_ports(hw_regs_t * hw, unsigned long data_port, hw->io_ports.irq_addr = irq_port; } -static void -sgiioc4_maskproc(ide_drive_t * drive, int mask) -{ - writeb(ATA_DEVCTL_OBS | (mask ? 2 : 0), - (void __iomem *)drive->hwif->io_ports.ctl_addr); -} - static int sgiioc4_checkirq(ide_hwif_t * hwif) { @@ -563,8 +556,6 @@ static const struct ide_port_ops sgiioc4_port_ops = { .set_dma_mode = sgiioc4_set_dma_mode, /* reset DMA engine, clear IRQs */ .resetproc = sgiioc4_resetproc, - /* mask on/off NIEN register */ - .maskproc = sgiioc4_maskproc, }; static const struct ide_dma_ops sgiioc4_dma_ops = {