From: Bartlomiej Zolnierkiewicz Date: Fri, 10 Oct 2008 20:39:39 +0000 (+0200) Subject: ide: move IDE{FLOPPY,TAPE}_WAIT_CMD defines to X-Git-Tag: v2.6.28-rc1~710^2~1 X-Git-Url: http://www.pilppa.org/gitweb/gitweb.cgi?a=commitdiff_plain;h=d6e2955a6b82d2312b5ff885ce13c8ab54d59d96;p=linux-2.6-omap-h63xx.git ide: move IDE{FLOPPY,TAPE}_WAIT_CMD defines to While at it: * IDE{FLOPPY,TAPE}_WAIT_CMD -> WAIT_{FLOPPY,TAPE}_CMD * Use enum for WAIT_* defines. There should be no functional changes caused by this patch. Acked-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 4d7e9ef8242..a63aba2c826 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -61,10 +61,6 @@ #define debug_log(fmt, args...) do {} while (0) #endif - -/* Some drives require a longer irq timeout. */ -#define IDEFLOPPY_WAIT_CMD (5 * WAIT_CMD) - /* * After each failed packet command we issue a request sense command and retry * the packet command IDEFLOPPY_MAX_PC_RETRIES times. @@ -226,7 +222,7 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) idefloppy_floppy_t *floppy = drive->driver_data; return ide_pc_intr(drive, floppy->pc, idefloppy_pc_intr, - IDEFLOPPY_WAIT_CMD, NULL, idefloppy_update_buffers, + WAIT_FLOPPY_CMD, NULL, idefloppy_update_buffers, idefloppy_retry_pc, NULL, ide_io_buffers); } @@ -244,10 +240,9 @@ static int idefloppy_transfer_pc(ide_drive_t *drive) drive->hwif->tp_ops->output_data(drive, NULL, floppy->pc->c, 12); /* Timeout for the packet command */ - return IDEFLOPPY_WAIT_CMD; + return WAIT_FLOPPY_CMD; } - /* * Called as an interrupt (or directly). When the device says it's ready for a * packet, we schedule the packet transfer to occur about 2-3 ticks later in @@ -272,7 +267,7 @@ static ide_startstop_t idefloppy_start_pc_transfer(ide_drive_t *drive) timeout = floppy->ticks; expiry = &idefloppy_transfer_pc; } else { - timeout = IDEFLOPPY_WAIT_CMD; + timeout = WAIT_FLOPPY_CMD; expiry = NULL; } @@ -322,7 +317,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, pc->retries++; return ide_issue_pc(drive, pc, idefloppy_start_pc_transfer, - IDEFLOPPY_WAIT_CMD, NULL); + WAIT_FLOPPY_CMD, NULL); } void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *pc) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 737dd7db6bb..25190966ed3 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -80,13 +80,6 @@ enum { */ #define IDETAPE_MAX_PC_RETRIES 3 -/* - * Some drives (for example, Seagate STT3401A Travan) require a very long - * timeout, because they don't return an interrupt or clear their busy bit - * until after the command completes (even retension commands). - */ -#define IDETAPE_WAIT_CMD (900*HZ) - /* * The following parameter is used to select the point in the internal tape fifo * in which we will start to refill the buffer. Decreasing the following @@ -663,7 +656,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; - return ide_pc_intr(drive, tape->pc, idetape_pc_intr, IDETAPE_WAIT_CMD, + return ide_pc_intr(drive, tape->pc, idetape_pc_intr, WAIT_TAPE_CMD, NULL, idetape_update_buffers, idetape_retry_pc, ide_tape_handle_dsc, ide_tape_io_buffers); } @@ -709,7 +702,7 @@ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive) idetape_tape_t *tape = drive->driver_data; return ide_transfer_pc(drive, tape->pc, idetape_pc_intr, - IDETAPE_WAIT_CMD, NULL); + WAIT_TAPE_CMD, NULL); } static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, @@ -758,7 +751,7 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, pc->retries++; return ide_issue_pc(drive, pc, idetape_transfer_pc, - IDETAPE_WAIT_CMD, NULL); + WAIT_TAPE_CMD, NULL); } /* A mode sense command is used to "sense" tape parameters. */ diff --git a/include/linux/ide.h b/include/linux/ide.h index 55098eed3b2..a9eced25acc 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -133,12 +133,28 @@ struct ide_io_ports { /* * Timeouts for various operations: */ -#define WAIT_DRQ (HZ/10) /* 100msec - spec allows up to 20ms */ -#define WAIT_READY (5*HZ) /* 5sec - some laptops are very slow */ -#define WAIT_PIDENTIFY (10*HZ) /* 10sec - should be less than 3ms (?), if all ATAPI CD is closed at boot */ -#define WAIT_WORSTCASE (30*HZ) /* 30sec - worst case when spinning up */ -#define WAIT_CMD (10*HZ) /* 10sec - maximum wait for an IRQ to happen */ -#define WAIT_MIN_SLEEP (2*HZ/100) /* 20msec - minimum sleep time */ +enum { + /* spec allows up to 20ms */ + WAIT_DRQ = HZ / 10, /* 100ms */ + /* some laptops are very slow */ + WAIT_READY = 5 * HZ, /* 5s */ + /* should be less than 3ms (?), if all ATAPI CD is closed at boot */ + WAIT_PIDENTIFY = 10 * HZ, /* 10s */ + /* worst case when spinning up */ + WAIT_WORSTCASE = 30 * HZ, /* 30s */ + /* maximum wait for an IRQ to happen */ + WAIT_CMD = 10 * HZ, /* 10s */ + /* Some drives require a longer IRQ timeout. */ + WAIT_FLOPPY_CMD = 50 * HZ, /* 50s */ + /* + * Some drives (for example, Seagate STT3401A Travan) require a very + * long timeout, because they don't return an interrupt or clear their + * BSY bit until after the command completes (even retension commands). + */ + WAIT_TAPE_CMD = 900 * HZ, /* 900s */ + /* minimum sleep time */ + WAIT_MIN_SLEEP = HZ / 50, /* 20ms */ +}; /* * Op codes for special requests to be handled by ide_special_rq().