From: Haavard Skinnemoen <hskinnemoen@atmel.com>
Date: Thu, 24 Jan 2008 15:56:53 +0000 (+0100)
Subject: [AVR32] extint: Set initial irq type to low level
X-Git-Tag: v2.6.25-rc1~1240^2
X-Git-Url: http://www.pilppa.org/gitweb/gitweb.cgi?a=commitdiff_plain;h=d6c49a7a78fc841418bbd58bda504076f80ec51d;p=linux-2.6-omap-h63xx.git

[AVR32] extint: Set initial irq type to low level

David Brownell pointed out a mismatch in the avr32 extint code:

> I noticed a small glitch that's not fixed by this patch:  the
> initial type is falling edge, but IRQ_TYPE_NONE is mapped to
> IRQ_TYPE_LEVEL_LOW.  Potentially surprising.

Fix it by setting the initial type (and handler) to low level,
matching the meaning of IRQ_TYPE_NONE.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
---

diff --git a/arch/avr32/mach-at32ap/extint.c b/arch/avr32/mach-at32ap/extint.c
index 81a4a02f5f4..c36a6d59d6f 100644
--- a/arch/avr32/mach-at32ap/extint.c
+++ b/arch/avr32/mach-at32ap/extint.c
@@ -226,15 +226,15 @@ static int __init eic_probe(struct platform_device *pdev)
 	pattern = eic_readl(eic, MODE);
 	nr_irqs = fls(pattern);
 
-	/* Trigger on falling edge unless overridden by driver */
-	eic_writel(eic, MODE, 0UL);
+	/* Trigger on low level unless overridden by driver */
 	eic_writel(eic, EDGE, 0UL);
+	eic_writel(eic, LEVEL, 0UL);
 
 	eic->chip = &eic_chip;
 
 	for (i = 0; i < nr_irqs; i++) {
 		set_irq_chip_and_handler(eic->first_irq + i, &eic_chip,
-					 handle_edge_irq);
+					 handle_level_irq);
 		set_irq_chip_data(eic->first_irq + i, eic);
 	}