From: Kumar Gala Date: Mon, 22 Sep 2008 22:00:07 +0000 (-0700) Subject: usb: remove code associated with !CONFIG_PPC_MERGE X-Git-Tag: v2.6.28-rc1~254^2~59 X-Git-Url: http://www.pilppa.org/gitweb/gitweb.cgi?a=commitdiff_plain;h=cede969fe21adece300300a455580635590deb47;p=linux-2.6-omap-h63xx.git usb: remove code associated with !CONFIG_PPC_MERGE Now that arch/ppc is gone we don't need CONFIG_PPC_MERGE anymore remove the dead code associated with !CONFIG_PPC_MERGE. Signed-off-by: Kumar Gala Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 7378aa137a4..c6f9961eed3 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1021,11 +1021,6 @@ MODULE_LICENSE ("GPL"); #define PS3_SYSTEM_BUS_DRIVER ps3_ehci_driver #endif -#if defined(CONFIG_440EPX) && !defined(CONFIG_PPC_MERGE) -#include "ehci-ppc-soc.c" -#define PLATFORM_DRIVER ehci_ppc_soc_driver -#endif - #ifdef CONFIG_USB_EHCI_HCD_PPC_OF #include "ehci-ppc-of.c" #define OF_PLATFORM_DRIVER ehci_hcd_ppc_of_driver diff --git a/drivers/usb/host/ehci-ppc-soc.c b/drivers/usb/host/ehci-ppc-soc.c deleted file mode 100644 index 529590eb403..00000000000 --- a/drivers/usb/host/ehci-ppc-soc.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * EHCI HCD (Host Controller Driver) for USB. - * - * (C) Copyright 2006-2007 Stefan Roese , DENX Software Engineering - * - * Bus Glue for PPC On-Chip EHCI driver - * Tested on AMCC 440EPx - * - * Based on "ehci-au1xxx.c" by K.Boge - * - * This file is licenced under the GPL. - */ - -#include - -extern int usb_disabled(void); - -/* called during probe() after chip reset completes */ -static int ehci_ppc_soc_setup(struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - int retval; - - retval = ehci_halt(ehci); - if (retval) - return retval; - - retval = ehci_init(hcd); - if (retval) - return retval; - - ehci->sbrn = 0x20; - return ehci_reset(ehci); -} - -/** - * usb_ehci_ppc_soc_probe - initialize PPC-SoC-based HCDs - * Context: !in_interrupt() - * - * Allocates basic resources for this USB host controller, and - * then invokes the start() method for the HCD associated with it - * through the hotplug entry's driver_data. - * - */ -int usb_ehci_ppc_soc_probe(const struct hc_driver *driver, - struct usb_hcd **hcd_out, - struct platform_device *dev) -{ - int retval; - struct usb_hcd *hcd; - struct ehci_hcd *ehci; - - if (dev->resource[1].flags != IORESOURCE_IRQ) { - pr_debug("resource[1] is not IORESOURCE_IRQ"); - retval = -ENOMEM; - } - hcd = usb_create_hcd(driver, &dev->dev, "PPC-SOC EHCI"); - if (!hcd) - return -ENOMEM; - hcd->rsrc_start = dev->resource[0].start; - hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1; - - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - pr_debug("request_mem_region failed"); - retval = -EBUSY; - goto err1; - } - - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); - if (!hcd->regs) { - pr_debug("ioremap failed"); - retval = -ENOMEM; - goto err2; - } - - ehci = hcd_to_ehci(hcd); - ehci->big_endian_mmio = 1; - ehci->big_endian_desc = 1; - ehci->caps = hcd->regs; - ehci->regs = hcd->regs + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); - - /* cache this readonly data; minimize chip reads */ - ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); - -#if defined(CONFIG_440EPX) - /* - * 440EPx Errata USBH_3 - * Fix: Enable Break Memory Transfer (BMT) in INSNREG3 - */ - out_be32((void *)((ulong)(&ehci->regs->command) + 0x8c), (1 << 0)); - ehci_dbg(ehci, "Break Memory Transfer (BMT) has beed enabled!\n"); -#endif - - retval = usb_add_hcd(hcd, dev->resource[1].start, IRQF_DISABLED); - if (retval == 0) - return retval; - - iounmap(hcd->regs); -err2: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -err1: - usb_put_hcd(hcd); - return retval; -} - -/* may be called without controller electrically present */ -/* may be called with controller, bus, and devices active */ - -/** - * usb_ehci_hcd_ppc_soc_remove - shutdown processing for PPC-SoC-based HCDs - * @dev: USB Host Controller being removed - * Context: !in_interrupt() - * - * Reverses the effect of usb_ehci_hcd_ppc_soc_probe(), first invoking - * the HCD's stop() method. It is always called from a thread - * context, normally "rmmod", "apmd", or something similar. - * - */ -void usb_ehci_ppc_soc_remove(struct usb_hcd *hcd, struct platform_device *dev) -{ - usb_remove_hcd(hcd); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); - usb_put_hcd(hcd); -} - -static const struct hc_driver ehci_ppc_soc_hc_driver = { - .description = hcd_name, - .product_desc = "PPC-SOC EHCI", - .hcd_priv_size = sizeof(struct ehci_hcd), - - /* - * generic hardware linkage - */ - .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2, - - /* - * basic lifecycle operations - */ - .reset = ehci_ppc_soc_setup, - .start = ehci_run, - .stop = ehci_stop, - .shutdown = ehci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - - /* - * scheduling support - */ - .get_frame_number = ehci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, - .bus_suspend = ehci_bus_suspend, - .bus_resume = ehci_bus_resume, - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, -}; - -static int ehci_hcd_ppc_soc_drv_probe(struct platform_device *pdev) -{ - struct usb_hcd *hcd = NULL; - int ret; - - pr_debug("In ehci_hcd_ppc_soc_drv_probe\n"); - - if (usb_disabled()) - return -ENODEV; - - /* FIXME we only want one one probe() not two */ - ret = usb_ehci_ppc_soc_probe(&ehci_ppc_soc_hc_driver, &hcd, pdev); - return ret; -} - -static int ehci_hcd_ppc_soc_drv_remove(struct platform_device *pdev) -{ - struct usb_hcd *hcd = platform_get_drvdata(pdev); - - /* FIXME we only want one one remove() not two */ - usb_ehci_ppc_soc_remove(hcd, pdev); - return 0; -} - -MODULE_ALIAS("platform:ppc-soc-ehci"); -static struct platform_driver ehci_ppc_soc_driver = { - .probe = ehci_hcd_ppc_soc_drv_probe, - .remove = ehci_hcd_ppc_soc_drv_remove, - .shutdown = usb_hcd_platform_shutdown, - .driver = { - .name = "ppc-soc-ehci", - } -}; diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index b697a13364e..fb1770d6e20 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -604,16 +604,7 @@ ehci_port_speed(struct ehci_hcd *ehci, unsigned int portsc) /* * Big-endian read/write functions are arch-specific. * Other arches can be added if/when they're needed. - * - * REVISIT: arch/powerpc now has readl/writel_be, so the - * definition below can die once the 4xx support is - * finally ported over. */ -#if defined(CONFIG_PPC) && !defined(CONFIG_PPC_MERGE) -#define readl_be(addr) in_be32((__force unsigned *)addr) -#define writel_be(val, addr) out_be32((__force unsigned *)addr, val) -#endif - #if defined(CONFIG_ARM) && defined(CONFIG_ARCH_IXP4XX) #define readl_be(addr) __raw_readl((__force unsigned *)addr) #define writel_be(val, addr) __raw_writel(val, (__force unsigned *)addr) diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h index faf622eafce..222011f6172 100644 --- a/drivers/usb/host/ohci.h +++ b/drivers/usb/host/ohci.h @@ -540,15 +540,7 @@ static inline struct usb_hcd *ohci_to_hcd (const struct ohci_hcd *ohci) * Big-endian read/write functions are arch-specific. * Other arches can be added if/when they're needed. * - * REVISIT: arch/powerpc now has readl/writel_be, so the - * definition below can die once the STB04xxx support is - * finally ported over. */ -#if defined(CONFIG_PPC) && !defined(CONFIG_PPC_MERGE) -#define readl_be(addr) in_be32((__force unsigned *)addr) -#define writel_be(val, addr) out_be32((__force unsigned *)addr, val) -#endif - static inline unsigned int _ohci_readl (const struct ohci_hcd *ohci, __hc32 __iomem * regs) {