From: Andrew Victor Date: Wed, 23 Jan 2008 08:25:15 +0000 (+0100) Subject: [ARM] 4757/1: [AT91] UART initialization X-Git-Tag: v2.6.25-rc1~1175^2~2^2~8 X-Git-Url: http://www.pilppa.org/gitweb/gitweb.cgi?a=commitdiff_plain;h=c8f385a631ef1f49d67a3798ca40dec36ccdf07d;p=linux-2.6-omap-h63xx.git [ARM] 4757/1: [AT91] UART initialization Modify the UART initialization to allow the board-initialization code to specify which pins are connected, and which pins should therefore be initialized. The current at91_init_serial() will continue to work as-is, but is marked as "deprecated" and will be removed once the board-specific files has been updated to use the new interface. As in the AVR32 code, we assume that the TX and RX pins will always be initialized. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index a2647265c21..23966229ea9 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -884,17 +884,21 @@ static struct platform_device at91rm9200_uart0_device = { .num_resources = ARRAY_SIZE(uart0_resources), }; -static inline void configure_usart0_pins(void) +static inline void configure_usart0_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PA17, 1); /* TXD0 */ at91_set_A_periph(AT91_PIN_PA18, 0); /* RXD0 */ - at91_set_A_periph(AT91_PIN_PA20, 0); /* CTS0 */ - /* - * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21. - * We need to drive the pin manually. Default is off (RTS is active low). - */ - at91_set_gpio_output(AT91_PIN_PA21, 1); + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PA20, 0); /* CTS0 */ + + if (pins & ATMEL_UART_RTS) { + /* + * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21. + * We need to drive the pin manually. Default is off (RTS is active low). + */ + at91_set_gpio_output(AT91_PIN_PA21, 1); + } } static struct resource uart1_resources[] = { @@ -929,16 +933,23 @@ static struct platform_device at91rm9200_uart1_device = { .num_resources = ARRAY_SIZE(uart1_resources), }; -static inline void configure_usart1_pins(void) +static inline void configure_usart1_pins(unsigned pins) { - at91_set_A_periph(AT91_PIN_PB18, 0); /* RI1 */ - at91_set_A_periph(AT91_PIN_PB19, 0); /* DTR1 */ at91_set_A_periph(AT91_PIN_PB20, 1); /* TXD1 */ at91_set_A_periph(AT91_PIN_PB21, 0); /* RXD1 */ - at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD1 */ - at91_set_A_periph(AT91_PIN_PB24, 0); /* CTS1 */ - at91_set_A_periph(AT91_PIN_PB25, 0); /* DSR1 */ - at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS1 */ + + if (pins & ATMEL_UART_RI) + at91_set_A_periph(AT91_PIN_PB18, 0); /* RI1 */ + if (pins & ATMEL_UART_DTR) + at91_set_A_periph(AT91_PIN_PB19, 0); /* DTR1 */ + if (pins & ATMEL_UART_DCD) + at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD1 */ + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PB24, 0); /* CTS1 */ + if (pins & ATMEL_UART_DSR) + at91_set_A_periph(AT91_PIN_PB25, 0); /* DSR1 */ + if (pins & ATMEL_UART_RTS) + at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS1 */ } static struct resource uart2_resources[] = { @@ -973,10 +984,15 @@ static struct platform_device at91rm9200_uart2_device = { .num_resources = ARRAY_SIZE(uart2_resources), }; -static inline void configure_usart2_pins(void) +static inline void configure_usart2_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PA22, 0); /* RXD2 */ at91_set_A_periph(AT91_PIN_PA23, 1); /* TXD2 */ + + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PA30, 0); /* CTS2 */ + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PA31, 0); /* RTS2 */ } static struct resource uart3_resources[] = { @@ -1011,16 +1027,21 @@ static struct platform_device at91rm9200_uart3_device = { .num_resources = ARRAY_SIZE(uart3_resources), }; -static inline void configure_usart3_pins(void) +static inline void configure_usart3_pins(unsigned pins) { at91_set_B_periph(AT91_PIN_PA5, 1); /* TXD3 */ at91_set_B_periph(AT91_PIN_PA6, 0); /* RXD3 */ + + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PB1, 0); /* CTS3 */ + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PB0, 0); /* RTS3 */ } static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ -void __init at91_init_serial(struct at91_uart_config *config) +void __init __deprecated at91_init_serial(struct at91_uart_config *config) { int i; @@ -1028,22 +1049,22 @@ void __init at91_init_serial(struct at91_uart_config *config) for (i = 0; i < config->nr_tty; i++) { switch (config->tty_map[i]) { case 0: - configure_usart0_pins(); + configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); at91_uarts[i] = &at91rm9200_uart0_device; at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart"); break; case 1: - configure_usart1_pins(); + configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI); at91_uarts[i] = &at91rm9200_uart1_device; at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart"); break; case 2: - configure_usart2_pins(); + configure_usart2_pins(0); at91_uarts[i] = &at91rm9200_uart2_device; at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart"); break; case 3: - configure_usart3_pins(); + configure_usart3_pins(0); at91_uarts[i] = &at91rm9200_uart3_device; at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart"); break; @@ -1065,6 +1086,53 @@ void __init at91_init_serial(struct at91_uart_config *config) printk(KERN_INFO "AT91: No default serial console defined.\n"); } +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) +{ + struct platform_device *pdev; + + switch (id) { + case 0: /* DBGU */ + pdev = &at91rm9200_dbgu_device; + configure_dbgu_pins(); + at91_clock_associate("mck", &pdev->dev, "usart"); + break; + case AT91RM9200_ID_US0: + pdev = &at91rm9200_uart0_device; + configure_usart0_pins(pins); + at91_clock_associate("usart0_clk", &pdev->dev, "usart"); + break; + case AT91RM9200_ID_US1: + pdev = &at91rm9200_uart1_device; + configure_usart1_pins(pins); + at91_clock_associate("usart1_clk", &pdev->dev, "usart"); + break; + case AT91RM9200_ID_US2: + pdev = &at91rm9200_uart2_device; + configure_usart2_pins(pins); + at91_clock_associate("usart2_clk", &pdev->dev, "usart"); + break; + case AT91RM9200_ID_US3: + pdev = &at91rm9200_uart3_device; + configure_usart3_pins(pins); + at91_clock_associate("usart3_clk", &pdev->dev, "usart"); + break; + default: + return; + } + pdev->id = portnr; /* update to mapped ID */ + + if (portnr < ATMEL_MAX_UART) + at91_uarts[portnr] = pdev; +} + +void __init at91_set_serial_console(unsigned portnr) +{ + if (portnr < ATMEL_MAX_UART) + atmel_default_console_device = at91_uarts[portnr]; + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); +} + void __init at91_add_device_serial(void) { int i; @@ -1075,7 +1143,9 @@ void __init at91_add_device_serial(void) } } #else -void __init at91_init_serial(struct at91_uart_config *config) {} +void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} +void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} #endif diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 8acd62b75cb..5dd06bdccb0 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -760,16 +760,23 @@ static struct platform_device at91sam9260_uart0_device = { .num_resources = ARRAY_SIZE(uart0_resources), }; -static inline void configure_usart0_pins(void) +static inline void configure_usart0_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */ at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */ - at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS0 */ - at91_set_A_periph(AT91_PIN_PB27, 0); /* CTS0 */ - at91_set_A_periph(AT91_PIN_PB24, 0); /* DTR0 */ - at91_set_A_periph(AT91_PIN_PB22, 0); /* DSR0 */ - at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD0 */ - at91_set_A_periph(AT91_PIN_PB25, 0); /* RI0 */ + + if (pins & ATMEL_UART_RTS) + at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS0 */ + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PB27, 0); /* CTS0 */ + if (pins & ATMEL_UART_DTR) + at91_set_A_periph(AT91_PIN_PB24, 0); /* DTR0 */ + if (pins & ATMEL_UART_DSR) + at91_set_A_periph(AT91_PIN_PB22, 0); /* DSR0 */ + if (pins & ATMEL_UART_DCD) + at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD0 */ + if (pins & ATMEL_UART_RI) + at91_set_A_periph(AT91_PIN_PB25, 0); /* RI0 */ } static struct resource uart1_resources[] = { @@ -804,12 +811,15 @@ static struct platform_device at91sam9260_uart1_device = { .num_resources = ARRAY_SIZE(uart1_resources), }; -static inline void configure_usart1_pins(void) +static inline void configure_usart1_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */ at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */ - at91_set_A_periph(AT91_PIN_PB28, 0); /* RTS1 */ - at91_set_A_periph(AT91_PIN_PB29, 0); /* CTS1 */ + + if (pins & ATMEL_UART_RTS) + at91_set_A_periph(AT91_PIN_PB28, 0); /* RTS1 */ + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PB29, 0); /* CTS1 */ } static struct resource uart2_resources[] = { @@ -844,10 +854,15 @@ static struct platform_device at91sam9260_uart2_device = { .num_resources = ARRAY_SIZE(uart2_resources), }; -static inline void configure_usart2_pins(void) +static inline void configure_usart2_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */ at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */ + + if (pins & ATMEL_UART_RTS) + at91_set_A_periph(AT91_PIN_PA4, 0); /* RTS2 */ + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PA5, 0); /* CTS2 */ } static struct resource uart3_resources[] = { @@ -882,10 +897,15 @@ static struct platform_device at91sam9260_uart3_device = { .num_resources = ARRAY_SIZE(uart3_resources), }; -static inline void configure_usart3_pins(void) +static inline void configure_usart3_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PB10, 1); /* TXD3 */ at91_set_A_periph(AT91_PIN_PB11, 0); /* RXD3 */ + + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PC8, 0); /* RTS3 */ + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PC10, 0); /* CTS3 */ } static struct resource uart4_resources[] = { @@ -967,7 +987,7 @@ static inline void configure_usart5_pins(void) static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ -void __init at91_init_serial(struct at91_uart_config *config) +void __init __deprecated at91_init_serial(struct at91_uart_config *config) { int i; @@ -975,22 +995,22 @@ void __init at91_init_serial(struct at91_uart_config *config) for (i = 0; i < config->nr_tty; i++) { switch (config->tty_map[i]) { case 0: - configure_usart0_pins(); + configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI); at91_uarts[i] = &at91sam9260_uart0_device; at91_clock_associate("usart0_clk", &at91sam9260_uart0_device.dev, "usart"); break; case 1: - configure_usart1_pins(); + configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); at91_uarts[i] = &at91sam9260_uart1_device; at91_clock_associate("usart1_clk", &at91sam9260_uart1_device.dev, "usart"); break; case 2: - configure_usart2_pins(); + configure_usart2_pins(0); at91_uarts[i] = &at91sam9260_uart2_device; at91_clock_associate("usart2_clk", &at91sam9260_uart2_device.dev, "usart"); break; case 3: - configure_usart3_pins(); + configure_usart3_pins(0); at91_uarts[i] = &at91sam9260_uart3_device; at91_clock_associate("usart3_clk", &at91sam9260_uart3_device.dev, "usart"); break; @@ -1022,6 +1042,63 @@ void __init at91_init_serial(struct at91_uart_config *config) printk(KERN_INFO "AT91: No default serial console defined.\n"); } +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) +{ + struct platform_device *pdev; + + switch (id) { + case 0: /* DBGU */ + pdev = &at91sam9260_dbgu_device; + configure_dbgu_pins(); + at91_clock_associate("mck", &pdev->dev, "usart"); + break; + case AT91SAM9260_ID_US0: + pdev = &at91sam9260_uart0_device; + configure_usart0_pins(pins); + at91_clock_associate("usart0_clk", &pdev->dev, "usart"); + break; + case AT91SAM9260_ID_US1: + pdev = &at91sam9260_uart1_device; + configure_usart1_pins(pins); + at91_clock_associate("usart1_clk", &pdev->dev, "usart"); + break; + case AT91SAM9260_ID_US2: + pdev = &at91sam9260_uart2_device; + configure_usart2_pins(pins); + at91_clock_associate("usart2_clk", &pdev->dev, "usart"); + break; + case AT91SAM9260_ID_US3: + pdev = &at91sam9260_uart3_device; + configure_usart3_pins(pins); + at91_clock_associate("usart3_clk", &pdev->dev, "usart"); + break; + case AT91SAM9260_ID_US4: + pdev = &at91sam9260_uart4_device; + configure_usart4_pins(); + at91_clock_associate("usart4_clk", &pdev->dev, "usart"); + break; + case AT91SAM9260_ID_US5: + pdev = &at91sam9260_uart5_device; + configure_usart5_pins(); + at91_clock_associate("usart5_clk", &pdev->dev, "usart"); + break; + default: + return; + } + pdev->id = portnr; /* update to mapped ID */ + + if (portnr < ATMEL_MAX_UART) + at91_uarts[portnr] = pdev; +} + +void __init at91_set_serial_console(unsigned portnr) +{ + if (portnr < ATMEL_MAX_UART) + atmel_default_console_device = at91_uarts[portnr]; + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); +} + void __init at91_add_device_serial(void) { int i; @@ -1032,7 +1109,9 @@ void __init at91_add_device_serial(void) } } #else -void __init at91_init_serial(struct at91_uart_config *config) {} +void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} +void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} #endif diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index ba84ba6f18f..467a6431d71 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -867,12 +867,15 @@ static struct platform_device at91sam9261_uart0_device = { .num_resources = ARRAY_SIZE(uart0_resources), }; -static inline void configure_usart0_pins(void) +static inline void configure_usart0_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PC8, 1); /* TXD0 */ at91_set_A_periph(AT91_PIN_PC9, 0); /* RXD0 */ - at91_set_A_periph(AT91_PIN_PC10, 0); /* RTS0 */ - at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS0 */ + + if (pins & ATMEL_UART_RTS) + at91_set_A_periph(AT91_PIN_PC10, 0); /* RTS0 */ + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS0 */ } static struct resource uart1_resources[] = { @@ -907,10 +910,15 @@ static struct platform_device at91sam9261_uart1_device = { .num_resources = ARRAY_SIZE(uart1_resources), }; -static inline void configure_usart1_pins(void) +static inline void configure_usart1_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PC12, 1); /* TXD1 */ at91_set_A_periph(AT91_PIN_PC13, 0); /* RXD1 */ + + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PA12, 0); /* RTS1 */ + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PA13, 0); /* CTS1 */ } static struct resource uart2_resources[] = { @@ -945,16 +953,21 @@ static struct platform_device at91sam9261_uart2_device = { .num_resources = ARRAY_SIZE(uart2_resources), }; -static inline void configure_usart2_pins(void) +static inline void configure_usart2_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PC15, 0); /* RXD2 */ at91_set_A_periph(AT91_PIN_PC14, 1); /* TXD2 */ + + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PA15, 0); /* RTS2*/ + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PA16, 0); /* CTS2 */ } static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ -void __init at91_init_serial(struct at91_uart_config *config) +void __init __deprecated at91_init_serial(struct at91_uart_config *config) { int i; @@ -962,17 +975,17 @@ void __init at91_init_serial(struct at91_uart_config *config) for (i = 0; i < config->nr_tty; i++) { switch (config->tty_map[i]) { case 0: - configure_usart0_pins(); + configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); at91_uarts[i] = &at91sam9261_uart0_device; at91_clock_associate("usart0_clk", &at91sam9261_uart0_device.dev, "usart"); break; case 1: - configure_usart1_pins(); + configure_usart1_pins(0); at91_uarts[i] = &at91sam9261_uart1_device; at91_clock_associate("usart1_clk", &at91sam9261_uart1_device.dev, "usart"); break; case 2: - configure_usart2_pins(); + configure_usart2_pins(0); at91_uarts[i] = &at91sam9261_uart2_device; at91_clock_associate("usart2_clk", &at91sam9261_uart2_device.dev, "usart"); break; @@ -994,6 +1007,48 @@ void __init at91_init_serial(struct at91_uart_config *config) printk(KERN_INFO "AT91: No default serial console defined.\n"); } +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) +{ + struct platform_device *pdev; + + switch (id) { + case 0: /* DBGU */ + pdev = &at91sam9261_dbgu_device; + configure_dbgu_pins(); + at91_clock_associate("mck", &pdev->dev, "usart"); + break; + case AT91SAM9261_ID_US0: + pdev = &at91sam9261_uart0_device; + configure_usart0_pins(pins); + at91_clock_associate("usart0_clk", &pdev->dev, "usart"); + break; + case AT91SAM9261_ID_US1: + pdev = &at91sam9261_uart1_device; + configure_usart1_pins(pins); + at91_clock_associate("usart1_clk", &pdev->dev, "usart"); + break; + case AT91SAM9261_ID_US2: + pdev = &at91sam9261_uart2_device; + configure_usart2_pins(pins); + at91_clock_associate("usart2_clk", &pdev->dev, "usart"); + break; + default: + return; + } + pdev->id = portnr; /* update to mapped ID */ + + if (portnr < ATMEL_MAX_UART) + at91_uarts[portnr] = pdev; +} + +void __init at91_set_serial_console(unsigned portnr) +{ + if (portnr < ATMEL_MAX_UART) + atmel_default_console_device = at91_uarts[portnr]; + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); +} + void __init at91_add_device_serial(void) { int i; @@ -1004,7 +1059,9 @@ void __init at91_add_device_serial(void) } } #else -void __init at91_init_serial(struct at91_uart_config *config) {} +void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} +void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} #endif diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index c025f5c5ffa..a9f35d0c1cb 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -1071,12 +1071,15 @@ static struct platform_device at91sam9263_uart0_device = { .num_resources = ARRAY_SIZE(uart0_resources), }; -static inline void configure_usart0_pins(void) +static inline void configure_usart0_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */ at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */ - at91_set_A_periph(AT91_PIN_PA28, 0); /* RTS0 */ - at91_set_A_periph(AT91_PIN_PA29, 0); /* CTS0 */ + + if (pins & ATMEL_UART_RTS) + at91_set_A_periph(AT91_PIN_PA28, 0); /* RTS0 */ + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PA29, 0); /* CTS0 */ } static struct resource uart1_resources[] = { @@ -1111,12 +1114,15 @@ static struct platform_device at91sam9263_uart1_device = { .num_resources = ARRAY_SIZE(uart1_resources), }; -static inline void configure_usart1_pins(void) +static inline void configure_usart1_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */ at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */ - at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */ - at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */ + + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */ + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */ } static struct resource uart2_resources[] = { @@ -1151,18 +1157,21 @@ static struct platform_device at91sam9263_uart2_device = { .num_resources = ARRAY_SIZE(uart2_resources), }; -static inline void configure_usart2_pins(void) +static inline void configure_usart2_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */ at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */ - at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */ - at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */ + + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */ + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */ } static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ -void __init at91_init_serial(struct at91_uart_config *config) +void __init __deprecated at91_init_serial(struct at91_uart_config *config) { int i; @@ -1170,17 +1179,17 @@ void __init at91_init_serial(struct at91_uart_config *config) for (i = 0; i < config->nr_tty; i++) { switch (config->tty_map[i]) { case 0: - configure_usart0_pins(); + configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); at91_uarts[i] = &at91sam9263_uart0_device; at91_clock_associate("usart0_clk", &at91sam9263_uart0_device.dev, "usart"); break; case 1: - configure_usart1_pins(); + configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); at91_uarts[i] = &at91sam9263_uart1_device; at91_clock_associate("usart1_clk", &at91sam9263_uart1_device.dev, "usart"); break; case 2: - configure_usart2_pins(); + configure_usart2_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); at91_uarts[i] = &at91sam9263_uart2_device; at91_clock_associate("usart2_clk", &at91sam9263_uart2_device.dev, "usart"); break; @@ -1202,6 +1211,48 @@ void __init at91_init_serial(struct at91_uart_config *config) printk(KERN_INFO "AT91: No default serial console defined.\n"); } +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) +{ + struct platform_device *pdev; + + switch (id) { + case 0: /* DBGU */ + pdev = &at91sam9263_dbgu_device; + configure_dbgu_pins(); + at91_clock_associate("mck", &pdev->dev, "usart"); + break; + case AT91SAM9263_ID_US0: + pdev = &at91sam9263_uart0_device; + configure_usart0_pins(pins); + at91_clock_associate("usart0_clk", &pdev->dev, "usart"); + break; + case AT91SAM9263_ID_US1: + pdev = &at91sam9263_uart1_device; + configure_usart1_pins(pins); + at91_clock_associate("usart1_clk", &pdev->dev, "usart"); + break; + case AT91SAM9263_ID_US2: + pdev = &at91sam9263_uart2_device; + configure_usart2_pins(pins); + at91_clock_associate("usart2_clk", &pdev->dev, "usart"); + break; + default: + return; + } + pdev->id = portnr; /* update to mapped ID */ + + if (portnr < ATMEL_MAX_UART) + at91_uarts[portnr] = pdev; +} + +void __init at91_set_serial_console(unsigned portnr) +{ + if (portnr < ATMEL_MAX_UART) + atmel_default_console_device = at91_uarts[portnr]; + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); +} + void __init at91_add_device_serial(void) { int i; @@ -1213,6 +1264,8 @@ void __init at91_add_device_serial(void) } #else void __init at91_init_serial(struct at91_uart_config *config) {} +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} +void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} #endif diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index e886cdfe919..a942b9e3556 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -676,12 +676,23 @@ static struct platform_device at91sam9rl_uart0_device = { .num_resources = ARRAY_SIZE(uart0_resources), }; -static inline void configure_usart0_pins(void) +static inline void configure_usart0_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PA6, 1); /* TXD0 */ at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */ - at91_set_A_periph(AT91_PIN_PA9, 0); /* RTS0 */ - at91_set_A_periph(AT91_PIN_PA10, 0); /* CTS0 */ + + if (pins & ATMEL_UART_RTS) + at91_set_A_periph(AT91_PIN_PA9, 0); /* RTS0 */ + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PA10, 0); /* CTS0 */ + if (pins & ATMEL_UART_DSR) + at91_set_A_periph(AT91_PIN_PD14, 0); /* DSR0 */ + if (pins & ATMEL_UART_DTR) + at91_set_A_periph(AT91_PIN_PD15, 0); /* DTR0 */ + if (pins & ATMEL_UART_DCD) + at91_set_A_periph(AT91_PIN_PD16, 0); /* DCD0 */ + if (pins & ATMEL_UART_RI) + at91_set_A_periph(AT91_PIN_PD17, 0); /* RI0 */ } static struct resource uart1_resources[] = { @@ -716,10 +727,15 @@ static struct platform_device at91sam9rl_uart1_device = { .num_resources = ARRAY_SIZE(uart1_resources), }; -static inline void configure_usart1_pins(void) +static inline void configure_usart1_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PA11, 1); /* TXD1 */ at91_set_A_periph(AT91_PIN_PA12, 0); /* RXD1 */ + + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PA18, 0); /* RTS1 */ + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PA19, 0); /* CTS1 */ } static struct resource uart2_resources[] = { @@ -754,10 +770,15 @@ static struct platform_device at91sam9rl_uart2_device = { .num_resources = ARRAY_SIZE(uart2_resources), }; -static inline void configure_usart2_pins(void) +static inline void configure_usart2_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PA13, 1); /* TXD2 */ at91_set_A_periph(AT91_PIN_PA14, 0); /* RXD2 */ + + if (pins & ATMEL_UART_RTS) + at91_set_A_periph(AT91_PIN_PA29, 0); /* RTS2 */ + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PA30, 0); /* CTS2 */ } static struct resource uart3_resources[] = { @@ -792,16 +813,21 @@ static struct platform_device at91sam9rl_uart3_device = { .num_resources = ARRAY_SIZE(uart3_resources), }; -static inline void configure_usart3_pins(void) +static inline void configure_usart3_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PB0, 1); /* TXD3 */ at91_set_A_periph(AT91_PIN_PB1, 0); /* RXD3 */ + + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PD4, 0); /* RTS3 */ + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PD3, 0); /* CTS3 */ } static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ -void __init at91_init_serial(struct at91_uart_config *config) +void __init __deprecated at91_init_serial(struct at91_uart_config *config) { int i; @@ -809,22 +835,22 @@ void __init at91_init_serial(struct at91_uart_config *config) for (i = 0; i < config->nr_tty; i++) { switch (config->tty_map[i]) { case 0: - configure_usart0_pins(); + configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); at91_uarts[i] = &at91sam9rl_uart0_device; at91_clock_associate("usart0_clk", &at91sam9rl_uart0_device.dev, "usart"); break; case 1: - configure_usart1_pins(); + configure_usart1_pins(0); at91_uarts[i] = &at91sam9rl_uart1_device; at91_clock_associate("usart1_clk", &at91sam9rl_uart1_device.dev, "usart"); break; case 2: - configure_usart2_pins(); + configure_usart2_pins(0); at91_uarts[i] = &at91sam9rl_uart2_device; at91_clock_associate("usart2_clk", &at91sam9rl_uart2_device.dev, "usart"); break; case 3: - configure_usart3_pins(); + configure_usart3_pins(0); at91_uarts[i] = &at91sam9rl_uart3_device; at91_clock_associate("usart3_clk", &at91sam9rl_uart3_device.dev, "usart"); break; @@ -846,6 +872,53 @@ void __init at91_init_serial(struct at91_uart_config *config) printk(KERN_INFO "AT91: No default serial console defined.\n"); } +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) +{ + struct platform_device *pdev; + + switch (id) { + case 0: /* DBGU */ + pdev = &at91sam9rl_dbgu_device; + configure_dbgu_pins(); + at91_clock_associate("mck", &pdev->dev, "usart"); + break; + case AT91SAM9RL_ID_US0: + pdev = &at91sam9rl_uart0_device; + configure_usart0_pins(pins); + at91_clock_associate("usart0_clk", &pdev->dev, "usart"); + break; + case AT91SAM9RL_ID_US1: + pdev = &at91sam9rl_uart1_device; + configure_usart1_pins(pins); + at91_clock_associate("usart1_clk", &pdev->dev, "usart"); + break; + case AT91SAM9RL_ID_US2: + pdev = &at91sam9rl_uart2_device; + configure_usart2_pins(pins); + at91_clock_associate("usart2_clk", &pdev->dev, "usart"); + break; + case AT91SAM9RL_ID_US3: + pdev = &at91sam9rl_uart3_device; + configure_usart3_pins(pins); + at91_clock_associate("usart3_clk", &pdev->dev, "usart"); + break; + default: + return; + } + pdev->id = portnr; /* update to mapped ID */ + + if (portnr < ATMEL_MAX_UART) + at91_uarts[portnr] = pdev; +} + +void __init at91_set_serial_console(unsigned portnr) +{ + if (portnr < ATMEL_MAX_UART) + atmel_default_console_device = at91_uarts[portnr]; + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); +} + void __init at91_add_device_serial(void) { int i; @@ -856,7 +929,9 @@ void __init at91_add_device_serial(void) } } #else -void __init at91_init_serial(struct at91_uart_config *config) {} +void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} +void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} #endif diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h index 7fefe018833..3f41ab28b37 100644 --- a/include/asm-arm/arch-at91/board.h +++ b/include/asm-arm/arch-at91/board.h @@ -101,13 +101,23 @@ extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_de extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices); /* Serial */ +#define ATMEL_UART_CTS 0x01 +#define ATMEL_UART_RTS 0x02 +#define ATMEL_UART_DSR 0x04 +#define ATMEL_UART_DTR 0x08 +#define ATMEL_UART_DCD 0x10 +#define ATMEL_UART_RI 0x20 + +extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins); +extern void __init at91_set_serial_console(unsigned portnr); + struct at91_uart_config { unsigned short console_tty; /* tty number of serial console */ unsigned short nr_tty; /* number of serial tty's */ short tty_map[]; /* map UART to tty number */ }; extern struct platform_device *atmel_default_console_device; -extern void __init at91_init_serial(struct at91_uart_config *config); +extern void __init __deprecated at91_init_serial(struct at91_uart_config *config); struct atmel_uart_data { short use_dma_tx; /* use transmit DMA? */