From: David Brownell Date: Thu, 11 Sep 2008 08:53:23 +0000 (+0300) Subject: usb: musb_hdrc build fixes X-Git-Tag: v2.6.28-rc1~254^2~51 X-Git-Url: http://www.pilppa.org/gitweb/gitweb.cgi?a=commitdiff_plain;h=c767c1c6f1febbd1351cc152bba6e37889322d17;p=linux-2.6-omap-h63xx.git usb: musb_hdrc build fixes Minor musb_hdrc updates: - so it'll build on DaVinci, given relevant platform updates; * remove support for an un-shipped OTG prototype * rely on gpiolib framework conversion for the I2C GPIOs * the mechanism has been removed - catch comments up to the recent removal of the per-SOC header with the silicon configuration data; - and remove two inappropriate "inline" declarations which just bloat host side code. There are still some more ==> changes needed in this driver, catching up to the relocation of most of the include/asm-arm/arch-* contents. Signed-off-by: David Brownell Signed-off-by: Felipe Balbi Cc: stable [2.6.27] Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 58b2b8fc943..4b9542bbb35 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -33,10 +33,6 @@ config USB_MUSB_SOC default y if ARCH_DAVINCI default y if ARCH_OMAP2430 default y if ARCH_OMAP34XX - help - Use a static file to describe how the - controller is configured (endpoints, mechanisms, etc) on the - current iteration of a given system-on-chip. comment "DaVinci 644x USB support" depends on USB_MUSB_HDRC && ARCH_DAVINCI diff --git a/drivers/usb/musb/cppi_dma.h b/drivers/usb/musb/cppi_dma.h index fc5216b5d2c..729b4071787 100644 --- a/drivers/usb/musb/cppi_dma.h +++ b/drivers/usb/musb/cppi_dma.h @@ -119,8 +119,8 @@ struct cppi { void __iomem *mregs; /* Mentor regs */ void __iomem *tibase; /* TI/CPPI regs */ - struct cppi_channel tx[MUSB_C_NUM_EPT - 1]; - struct cppi_channel rx[MUSB_C_NUM_EPR - 1]; + struct cppi_channel tx[4]; + struct cppi_channel rx[4]; struct dma_pool *pool; diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 75baf181a8c..dfb3bcbe00f 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include @@ -39,7 +40,7 @@ #include "musb_core.h" #ifdef CONFIG_MACH_DAVINCI_EVM -#include +#define GPIO_nVBUS_DRV 87 #endif #include "davinci.h" @@ -138,7 +139,6 @@ static int vbus_state = -1; /* VBUS SWITCHING IS BOARD-SPECIFIC */ #ifdef CONFIG_MACH_DAVINCI_EVM -#ifndef CONFIG_MACH_DAVINCI_EVM_OTG /* I2C operations are always synchronous, and require a task context. * With unloaded systems, using the shared workqueue seems to suffice @@ -146,12 +146,11 @@ static int vbus_state = -1; */ static void evm_deferred_drvvbus(struct work_struct *ignored) { - davinci_i2c_expander_op(0x3a, USB_DRVVBUS, vbus_state); + gpio_set_value_cansleep(GPIO_nVBUS_DRV, vbus_state); vbus_state = !vbus_state; } static DECLARE_WORK(evm_vbus_work, evm_deferred_drvvbus); -#endif /* modified board */ #endif /* EVM */ static void davinci_source_power(struct musb *musb, int is_on, int immediate) @@ -165,21 +164,10 @@ static void davinci_source_power(struct musb *musb, int is_on, int immediate) #ifdef CONFIG_MACH_DAVINCI_EVM if (machine_is_davinci_evm()) { -#ifdef CONFIG_MACH_DAVINCI_EVM_OTG - /* modified EVM board switching VBUS with GPIO(6) not I2C - * NOTE: PINMUX0.RGB888 (bit23) must be clear - */ - if (is_on) - gpio_set(GPIO(6)); - else - gpio_clear(GPIO(6)); - immediate = 1; -#else if (immediate) - davinci_i2c_expander_op(0x3a, USB_DRVVBUS, !is_on); + gpio_set_value_cansleep(GPIO_nVBUS_DRV, vbus_state); else schedule_work(&evm_vbus_work); -#endif } #endif if (immediate) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index bd82253a332..d5af6b0d8af 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -82,9 +82,9 @@ /* * This gets many kinds of configuration information: * - Kconfig for everything user-configurable - * - for SOC or family details * - platform_device for addressing, irq, and platform_data * - platform_data is mostly for board-specific informarion + * (plus recentrly, SOC or family details) * * Most of the conditional compilation will (someday) vanish. */ @@ -974,9 +974,9 @@ static void musb_shutdown(struct platform_device *pdev) /* * The silicon either has hard-wired endpoint configurations, or else * "dynamic fifo" sizing. The driver has support for both, though at this - * writing only the dynamic sizing is very well tested. We use normal - * idioms to so both modes are compile-tested, but dead code elimination - * leaves only the relevant one in the object file. + * writing only the dynamic sizing is very well tested. Since we switched + * away from compile-time hardware parameters, we can no longer rely on + * dead code elimination to leave only the relevant one in the object file. * * We don't currently use dynamic fifo setup capability to do anything * more than selecting one of a bunch of predefined configurations. diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 17b5c189250..3133990f04e 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -108,7 +108,7 @@ static void musb_ep_program(struct musb *musb, u8 epnum, /* * Clear TX fifo. Needed to avoid BABBLE errors. */ -static inline void musb_h_tx_flush_fifo(struct musb_hw_ep *ep) +static void musb_h_tx_flush_fifo(struct musb_hw_ep *ep) { void __iomem *epio = ep->regs; u16 csr; @@ -435,7 +435,7 @@ musb_advance_schedule(struct musb *musb, struct urb *urb, } } -static inline u16 musb_h_flush_rxfifo(struct musb_hw_ep *hw_ep, u16 csr) +static u16 musb_h_flush_rxfifo(struct musb_hw_ep *hw_ep, u16 csr) { /* we don't want fifo to fill itself again; * ignore dma (various models), @@ -1004,7 +1004,7 @@ static bool musb_h_ep0_continue(struct musb *musb, u16 len, struct urb *urb) /* * Handle default endpoint interrupt as host. Only called in IRQ time - * from the LinuxIsr() interrupt service routine. + * from musb_interrupt(). * * called with controller irqlocked */