From: Alan Stern Date: Mon, 25 Feb 2008 16:43:32 +0000 (-0500) Subject: USB: update Kconfig entry for USB_SUSPEND X-Git-Tag: v2.6.25-rc4~7^2~10 X-Git-Url: http://www.pilppa.org/gitweb/gitweb.cgi?a=commitdiff_plain;h=c2c8d1fdadda4abc90efdb7176f44cb903634511;p=linux-2.6-omap-h63xx.git USB: update Kconfig entry for USB_SUSPEND This patch (as1039) updates the Kconfig entry for USB_SUSPEND. The out-of-date reference to "power/state" is fixed, autosuspend is mentioned, and the dependency on EXPERIMENTAL is removed. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index 5c33cdb9cac..a2b0aa48b8e 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -87,12 +87,13 @@ config USB_DYNAMIC_MINORS If you are unsure about this, say N here. config USB_SUSPEND - bool "USB selective suspend/resume and wakeup (EXPERIMENTAL)" - depends on USB && PM && EXPERIMENTAL + bool "USB selective suspend/resume and wakeup" + depends on USB && PM help If you say Y here, you can use driver calls or the sysfs - "power/state" file to suspend or resume individual USB - peripherals. + "power/level" file to suspend or resume individual USB + peripherals and to enable or disable autosuspend (see + Documentation/usb/power-management.txt for more details). Also, USB "remote wakeup" signaling is supported, whereby some USB devices (like keyboards and network adapters) can wake up