From: Nobuhiro Iwamatsu Date: Fri, 30 Nov 2007 03:36:13 +0000 (+0900) Subject: sh: Support PCI IO access of SH7780 base boards. X-Git-Tag: v2.6.24-rc4~1^2 X-Git-Url: http://www.pilppa.org/gitweb/gitweb.cgi?a=commitdiff_plain;h=b0d98dc504c3f29cc4647fff87a5061be5f0f3d7;p=linux-2.6-omap-h63xx.git sh: Support PCI IO access of SH7780 base boards. The IO access of PCI is not supported in R7780RP and the MS7780SE board now. The support of the IO access mode of e100 and a lot of IDE chips becomes possible by fixing the code. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt --- diff --git a/arch/sh/drivers/pci/ops-r7780rp.c b/arch/sh/drivers/pci/ops-r7780rp.c index f2216081ab8..48fe4032ebe 100644 --- a/arch/sh/drivers/pci/ops-r7780rp.c +++ b/arch/sh/drivers/pci/ops-r7780rp.c @@ -40,8 +40,8 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) static struct resource sh7780_io_resource = { .name = "SH7780_IO", - .start = 0x2000, - .end = 0x2000 + SH7780_PCI_IO_SIZE - 1, + .start = SH7780_PCI_IO_BASE, + .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1, .flags = IORESOURCE_IO }; diff --git a/arch/sh/drivers/pci/ops-se7780.c b/arch/sh/drivers/pci/ops-se7780.c index 212674df5e1..bbdb48c124a 100644 --- a/arch/sh/drivers/pci/ops-se7780.c +++ b/arch/sh/drivers/pci/ops-se7780.c @@ -43,8 +43,8 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) static struct resource se7780_io_resource = { .name = "SH7780_IO", - .start = 0x2000, - .end = 0x2000 + SH7780_PCI_IO_SIZE - 1, + .start = SH7780_PCI_IO_BASE, + .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1, .flags = IORESOURCE_IO };