From: Jay Cliburn Date: Mon, 30 Apr 2007 02:42:11 +0000 (-0500) Subject: atl1: fix whitespace damage X-Git-Tag: v2.6.22-rc1~355^2~22 X-Git-Url: http://www.pilppa.org/gitweb/gitweb.cgi?a=commitdiff_plain;h=ab13a18a3c8cc5a386ae8c74d53ed5ca0b0ec7bb;p=linux-2.6-omap-h63xx.git atl1: fix whitespace damage Remove trailing whitespace and spaces preceding tabs. Signed-off-by: Jay Cliburn Signed-off-by: Jeff Garzik --- diff --git a/drivers/net/atl1/atl1_hw.c b/drivers/net/atl1/atl1_hw.c index 5b9dd3c1e84..ef886bdeac1 100644 --- a/drivers/net/atl1/atl1_hw.c +++ b/drivers/net/atl1/atl1_hw.c @@ -2,20 +2,20 @@ * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. * Copyright(c) 2006 Chris Snook * Copyright(c) 2006 Jay Cliburn - * + * * Derived from Intel e1000 driver * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. - * + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free * Software Foundation; either version 2 of the License, or (at your option) * any later version. - * + * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. - * + * * You should have received a copy of the GNU General Public License along with * this program; if not, write to the Free Software Foundation, Inc., 59 * Temple Place - Suite 330, Boston, MA 02111-1307, USA. @@ -42,9 +42,9 @@ s32 atl1_reset_hw(struct atl1_hw *hw) u32 icr; int i; - /* + /* * Clear Interrupt mask to stop board from generating - * interrupts & Clear any pending interrupt events + * interrupts & Clear any pending interrupt events */ /* * iowrite32(0, hw->hw_addr + REG_IMR); @@ -137,8 +137,8 @@ s32 atl1_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data) int i; val = ((u32) (reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT | - MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW | MDIO_CLK_25_4 << - MDIO_CLK_SEL_SHIFT; + MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW | MDIO_CLK_25_4 << + MDIO_CLK_SEL_SHIFT; iowrite32(val, hw->hw_addr + REG_MDIO_CTRL); ioread32(hw->hw_addr + REG_MDIO_CTRL); @@ -205,7 +205,7 @@ static bool atl1_spi_read(struct atl1_hw *hw, u32 addr, u32 *buf) /* * get_permanent_address - * return 0 if get valid mac address, + * return 0 if get valid mac address, */ static int atl1_get_permanent_address(struct atl1_hw *hw) { @@ -302,7 +302,7 @@ static int atl1_get_permanent_address(struct atl1_hw *hw) } /* - * Reads the adapter's MAC address from the EEPROM + * Reads the adapter's MAC address from the EEPROM * hw - Struct containing variables accessed by shared code */ s32 atl1_read_mac_addr(struct atl1_hw *hw) @@ -629,7 +629,7 @@ static void atl1_init_flash_opcode(struct atl1_hw *hw) * Performs basic configuration of the adapter. * hw - Struct containing variables accessed by shared code * Assumes that the controller has previously been reset and is in a - * post-reset uninitialized state. Initializes multicast table, + * post-reset uninitialized state. Initializes multicast table, * and Calls routines to setup link * Leaves the transmit and receive units disabled and uninitialized. */