From: Andrew Victor <andrew@sanpeople.com>
Date: Tue, 5 Dec 2006 13:37:02 +0000 (+0200)
Subject: [PATCH] AT91RM9200 Ethernet: Use dev_alloc_skb()
X-Git-Tag: v2.6.20-rc1~145^2^2~6^2~11
X-Git-Url: http://www.pilppa.org/gitweb/gitweb.cgi?a=commitdiff_plain;h=a3f63e4f4be0da938771d754e846ff0019f9d42e;p=linux-2.6-omap-h63xx.git

[PATCH] AT91RM9200 Ethernet: Use dev_alloc_skb()

Use dev_alloc_skb() instead of alloc_skb().

It is also not necessary to adjust skb->len manually since that's
already done by skb_put().

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---

diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c
index f33d957adc7..fada15d959d 100644
--- a/drivers/net/arm/at91_ether.c
+++ b/drivers/net/arm/at91_ether.c
@@ -853,14 +853,13 @@ static void at91ether_rx(struct net_device *dev)
 	while (dlist->descriptors[lp->rxBuffIndex].addr & EMAC_DESC_DONE) {
 		p_recv = dlist->recv_buf[lp->rxBuffIndex];
 		pktlen = dlist->descriptors[lp->rxBuffIndex].size & 0x7ff;	/* Length of frame including FCS */
-		skb = alloc_skb(pktlen + 2, GFP_ATOMIC);
+		skb = dev_alloc_skb(pktlen + 2);
 		if (skb != NULL) {
 			skb_reserve(skb, 2);
 			memcpy(skb_put(skb, pktlen), p_recv, pktlen);
 
 			skb->dev = dev;
 			skb->protocol = eth_type_trans(skb, dev);
-			skb->len = pktlen;
 			dev->last_rx = jiffies;
 			lp->stats.rx_bytes += pktlen;
 			netif_rx(skb);