From: Paulius Zaleckas Date: Wed, 19 Nov 2008 23:38:24 +0000 (-0800) Subject: phylib: fix phy name example in documentation X-Git-Tag: v2.6.28-rc6~8^2~15 X-Git-Url: http://www.pilppa.org/gitweb/gitweb.cgi?a=commitdiff_plain;h=9d6ada9f4141fb8ab3c5d7dffe382f6a68b8e961;hp=b47300168e770b60ab96c8924854c3b0eb4260eb;p=linux-2.6-omap-h63xx.git phylib: fix phy name example in documentation All MDIO bus drivers currently name bus with "%x" format. There is one exception where mv643xx_eth driver is using "%d". Phy address on the bus uses format "%02x". Fixing phy name example to match all real life MDIO drivers. Signed-off-by: Paulius Zaleckas Signed-off-by: David S. Miller --- diff --git a/Documentation/networking/phy.txt b/Documentation/networking/phy.txt index 8df6a7b0e66..88bb71b46da 100644 --- a/Documentation/networking/phy.txt +++ b/Documentation/networking/phy.txt @@ -96,7 +96,7 @@ Letting the PHY Abstraction Layer do Everything static void adjust_link(struct net_device *dev); Next, you need to know the device name of the PHY connected to this device. - The name will look something like, "phy0:0", where the first number is the + The name will look something like, "0:00", where the first number is the bus id, and the second is the PHY's address on that bus. Typically, the bus is responsible for making its ID unique.