From: Oliver Neukum <oliver@neukum.org>
Date: Tue, 22 Jan 2008 12:56:18 +0000 (+0100)
Subject: USB: more serial drivers writing after disconnect
X-Git-Tag: v2.6.25-rc1~1075^2~20
X-Git-Url: http://www.pilppa.org/gitweb/gitweb.cgi?a=commitdiff_plain;h=95bef012ea4a3cce437a4fcf59bb097d14944b0d;p=linux-2.6-omap-h63xx.git

USB: more serial drivers writing after disconnect

this covers the rest of the obvious cases by using the flags
and locks to guard against disconnect which were introduced
in the earlier patch against mos7720.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---

diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c
index 77bb893bf2e..f156dba0300 100644
--- a/drivers/usb/serial/airprime.c
+++ b/drivers/usb/serial/airprime.c
@@ -217,7 +217,10 @@ static void airprime_close(struct usb_serial_port *port, struct file * filp)
 	priv->rts_state = 0;
 	priv->dtr_state = 0;
 
-	airprime_send_setup(port);
+	mutex_lock(&port->serial->disc_mutex);
+	if (!port->serial->disconnected)
+		airprime_send_setup(port);
+	mutex_lock(&port->serial->disc_mutex);
 
 	for (i = 0; i < NUM_READ_URBS; ++i) {
 		usb_kill_urb (priv->read_urbp[i]);
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index cd5f71b7f63..f3ca66017a0 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -348,7 +348,10 @@ static void cp2101_close (struct usb_serial_port *port, struct file * filp)
 	usb_kill_urb(port->write_urb);
 	usb_kill_urb(port->read_urb);
 
-	cp2101_set_config_single(port, CP2101_UART, UART_DISABLE);
+	mutex_lock(&port->serial->disc_mutex);
+	if (!port->serial->disconnected)
+		cp2101_set_config_single(port, CP2101_UART, UART_DISABLE);
+	mutex_unlock(&port->serial->disc_mutex);
 }
 
 /*
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 2c142bb04fe..90dcc625f70 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1198,7 +1198,8 @@ static void ftdi_close (struct usb_serial_port *port, struct file *filp)
 
 	dbg("%s", __FUNCTION__);
 
-	if (c_cflag & HUPCL){
+	mutex_lock(&port->serial->disc_mutex);
+	if (c_cflag & HUPCL && !port->serial->disconnected){
 		/* Disable flow control */
 		if (usb_control_msg(port->serial->dev,
 				    usb_sndctrlpipe(port->serial->dev, 0),
@@ -1212,6 +1213,7 @@ static void ftdi_close (struct usb_serial_port *port, struct file *filp)
 		/* drop RTS and DTR */
 		clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
 	} /* Note change no line if hupcl is off */
+	mutex_unlock(&port->serial->disc_mutex);
 
 	/* cancel any scheduled reading */
 	cancel_delayed_work(&priv->rx_work);
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index f1c90cfe725..d74e43d6923 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -1020,19 +1020,26 @@ static void garmin_close (struct usb_serial_port *port, struct file * filp)
 	if (!serial)
 		return;
 
-	garmin_clear(garmin_data_p);
+	mutex_lock(&port->serial->disc_mutex);
+	if (!port->serial->disconnected)
+		garmin_clear(garmin_data_p);
 
 	/* shutdown our urbs */
 	usb_kill_urb (port->read_urb);
 	usb_kill_urb (port->write_urb);
 
-	if (noResponseFromAppLayer(garmin_data_p) ||
-	    ((garmin_data_p->flags & CLEAR_HALT_REQUIRED) != 0)) {
-		process_resetdev_request(port);
-		garmin_data_p->state = STATE_RESET;
+	if (!port->serial->disconnected) {
+		if (noResponseFromAppLayer(garmin_data_p) ||
+		    ((garmin_data_p->flags & CLEAR_HALT_REQUIRED) != 0)) {
+			process_resetdev_request(port);
+			garmin_data_p->state = STATE_RESET;
+		} else {
+			garmin_data_p->state = STATE_DISCONNECTED;
+		}
 	} else {
 		garmin_data_p->state = STATE_DISCONNECTED;
 	}
+	mutex_unlock(&port->serial->disc_mutex);
 }
 
 
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index c2347995c78..22b3f78a388 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -362,7 +362,7 @@ static void visor_close (struct usb_serial_port *port, struct file * filp)
 			kfree (transfer_buffer);
 		}
 	}
-	mutex_lock(&port->serial->disc_mutex);
+	mutex_unlock(&port->serial->disc_mutex);
 
 	if (stats)
 		dev_info(&port->dev, "Bytes In = %d  Bytes Out = %d\n",