From: Brice Goglin <brice@myri.com>
Date: Mon, 7 May 2007 21:49:59 +0000 (+0200)
Subject: myri10ge: update firmware headers
X-Git-Tag: v2.6.22-rc1~355^2~37
X-Git-Url: http://www.pilppa.org/gitweb/gitweb.cgi?a=commitdiff_plain;h=772a815804ae778aee7fcf937f3d29ab218ecdc7;p=linux-2.6-omap-h63xx.git

myri10ge: update firmware headers

Update myri10ge firmware headers to those of 1.4.16.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---

diff --git a/drivers/net/myri10ge/myri10ge_mcp.h b/drivers/net/myri10ge/myri10ge_mcp.h
index ee6261db2a5..a1d2a22296a 100644
--- a/drivers/net/myri10ge/myri10ge_mcp.h
+++ b/drivers/net/myri10ge/myri10ge_mcp.h
@@ -200,6 +200,13 @@ enum myri10ge_mcp_cmd_type {
 	/* data0, data1 = bus addr,
 	 * data2 = sizeof(struct mcp_irq_data) from driver point of view, allows
 	 * adding new stuff to mcp_irq_data without changing the ABI */
+
+	MXGEFW_CMD_UNALIGNED_TEST,
+	/* same than DMA_TEST (same args) but abort with UNALIGNED on unaligned
+	 * chipset */
+
+	MXGEFW_CMD_UNALIGNED_STATUS
+	    /* return data = boolean, true if the chipset is known to be unaligned */
 };
 
 enum myri10ge_mcp_cmd_status {
@@ -212,7 +219,8 @@ enum myri10ge_mcp_cmd_status {
 	MXGEFW_CMD_ERROR_HASH_ERROR,
 	MXGEFW_CMD_ERROR_BAD_PORT,
 	MXGEFW_CMD_ERROR_RESOURCES,
-	MXGEFW_CMD_ERROR_MULTICAST
+	MXGEFW_CMD_ERROR_MULTICAST,
+	MXGEFW_CMD_ERROR_UNALIGNED
 };
 
 #define MXGEFW_OLD_IRQ_DATA_LEN 40
@@ -228,6 +236,10 @@ struct mcp_irq_data {
 	/* 40 Bytes */
 	__be32 send_done_count;
 
+#define MXGEFW_LINK_DOWN 0
+#define MXGEFW_LINK_UP 1
+#define MXGEFW_LINK_MYRINET 2
+#define MXGEFW_LINK_UNKNOWN 3
 	__be32 link_up;
 	__be32 dropped_link_overflow;
 	__be32 dropped_link_error_or_filtered;