From: Anton Vorontsov Date: Fri, 3 Oct 2008 19:40:36 +0000 (+0400) Subject: powerpc/QE: move QE_GPIO Kconfig symbol into the platforms/Kconfig X-Git-Tag: v2.6.28-rc1~569^2~10^2~15 X-Git-Url: http://www.pilppa.org/gitweb/gitweb.cgi?a=commitdiff_plain;h=5c091193e4a12e88930a0bb3ed3632c51e926a76;p=linux-2.6-omap-h63xx.git powerpc/QE: move QE_GPIO Kconfig symbol into the platforms/Kconfig Specifying user-selectable option in the qe_lib/Kconfig was a bad idea because the qe_lib/Kconfig is included into the top level Kconfig, and thus the QE_GPIO option appears at the top level menu. This patch effectively moves the QE_GPIO option under the platform menu instead. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 6cf517f5fba..47e956c871f 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -249,6 +249,15 @@ config QUICC_ENGINE Selecting this option means that you wish to build a kernel for a machine with a QE coprocessor. +config QE_GPIO + bool "QE GPIO support" + depends on QUICC_ENGINE + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + help + Say Y here if you're going to use hardware that connects to the + QE GPIOs. + config CPM2 bool "Enable support for the CPM2 (Communications Processor Module)" depends on MPC85xx || 8260 diff --git a/arch/powerpc/sysdev/qe_lib/Kconfig b/arch/powerpc/sysdev/qe_lib/Kconfig index 1ce546462be..76ffbc48d4b 100644 --- a/arch/powerpc/sysdev/qe_lib/Kconfig +++ b/arch/powerpc/sysdev/qe_lib/Kconfig @@ -24,12 +24,3 @@ config QE_USB bool help QE USB Host Controller support - -config QE_GPIO - bool "QE GPIO support" - depends on QUICC_ENGINE - select GENERIC_GPIO - select ARCH_REQUIRE_GPIOLIB - help - Say Y here if you're going to use hardware that connects to the - QE GPIOs.