From: David Brownell <dbrownell@users.sourceforge.net>
Date: Thu, 7 Dec 2006 01:13:59 +0000 (-0800)
Subject: ARM: OMAP: gpio init section cleanups
X-Git-Tag: v2.6.22-omap1~180^2~76
X-Git-Url: http://www.pilppa.org/gitweb/gitweb.cgi?a=commitdiff_plain;h=444f42c48c1efc76bddbd0c94dadfe7eaaa34549;p=linux-2.6-omap-h63xx.git

ARM: OMAP: gpio init section cleanups

Minor GPIO cleanups:  remove needless #include, and omap_gpio_init()
should be __init, as well as all the board init code calling it.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---

diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 62e42c7a628..f65baa95986 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -246,7 +246,7 @@ static void __init fsample_init_smc91x(void)
 	mdelay(50);
 }
 
-void omap_fsample_init_irq(void)
+static void __init omap_fsample_init_irq(void)
 {
 	omap1_init_common_hw();
 	omap_init_irq();
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 9d2346fb68f..7b260b7c537 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -455,7 +455,7 @@ static void __init h3_init_smc91x(void)
 	}
 }
 
-void h3_init_irq(void)
+static void __init h3_init_irq(void)
 {
 	omap1_init_common_hw();
 	omap_init_irq();
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index cb00530ad27..7e63a41e37c 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -308,7 +308,7 @@ static void __init innovator_init_smc91x(void)
 	}
 }
 
-void innovator_init_irq(void)
+static void __init innovator_init_irq(void)
 {
 	omap1_init_common_hw();
 	omap_init_irq();
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index fa4be962df6..1d5c8d50972 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -246,7 +246,7 @@ static void __init perseus2_init_smc91x(void)
 	mdelay(50);
 }
 
-void omap_perseus2_init_irq(void)
+static void __init omap_perseus2_init_irq(void)
 {
 	omap1_init_common_hw();
 	omap_init_irq();
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 9dc6d3617bd..337455dfe64 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -13,7 +13,6 @@
 
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/sched.h>
 #include <linux/interrupt.h>
 #include <linux/sysdev.h>
 #include <linux/err.h>
@@ -1545,7 +1544,7 @@ void omap2_gpio_resume_after_retention(void)
  * This may get called early from board specific init
  * for boards that have interrupts routed via FPGA.
  */
-int omap_gpio_init(void)
+int __init omap_gpio_init(void)
 {
 	if (!initialized)
 		return _omap_gpio_init();