From: Jean Delvare Date: Thu, 10 Jul 2008 11:37:08 +0000 (+0200) Subject: [MTD] [NOR] gen_probe: No debug message when debugging is disabled X-Git-Tag: v2.6.27-rc1~69^2~15 X-Git-Url: http://www.pilppa.org/gitweb/gitweb.cgi?a=commitdiff_plain;h=3a3688b6af103e2c86a7cfc2050988655e184ecc;p=linux-2.6-omap-h63xx.git [MTD] [NOR] gen_probe: No debug message when debugging is disabled Use pr_debug(...) instead of printk(KERN_DEBUG ...) so that the message is only printed when debugging is enabled. Signed-off-by: Jean Delvare Tested-by: John stoffel Signed-off-by: David Woodhouse --- diff --git a/drivers/mtd/chips/gen_probe.c b/drivers/mtd/chips/gen_probe.c index e53a58ae384..f061885b281 100644 --- a/drivers/mtd/chips/gen_probe.c +++ b/drivers/mtd/chips/gen_probe.c @@ -70,8 +70,8 @@ static struct cfi_private *genprobe_ident_chips(struct map_info *map, struct chi interleave and device type, etc. */ if (!genprobe_new_chip(map, cp, &cfi)) { /* The probe didn't like it */ - printk(KERN_DEBUG "%s: Found no %s device at location zero\n", - cp->name, map->name); + pr_debug("%s: Found no %s device at location zero\n", + cp->name, map->name); return NULL; }