From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Wed, 17 Sep 2008 15:34:11 +0000 (+0100)
Subject: uwb: add the UWB stack (build system)
X-Git-Tag: v2.6.28-rc1~59^2~5^2~34
X-Git-Url: http://www.pilppa.org/gitweb/gitweb.cgi?a=commitdiff_plain;h=2f86c3e67d6423d6d23ee2f737ad4f0730435742;p=linux-2.6-omap-h63xx.git

uwb: add the UWB stack (build system)

The Kbuild and Kconfig files.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: David Vrabel <david.vrabel@csr.com>
---

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 70dba166890..8eedbfa52f0 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1220,6 +1220,8 @@ source "drivers/hid/Kconfig"
 
 source "drivers/usb/Kconfig"
 
+source "drivers/uwb/Kconfig"
+
 source "drivers/mmc/Kconfig"
 
 source "drivers/leds/Kconfig"
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index 9389d38f222..cb66c4da25c 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -677,6 +677,8 @@ source "fs/Kconfig"
 
 source "drivers/usb/Kconfig"
 
+source "drivers/uwb/Kconfig"
+
 source "arch/cris/Kconfig.debug"
 
 source "security/Kconfig"
diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig
index 396ab059efa..2b413325e88 100644
--- a/arch/h8300/Kconfig
+++ b/arch/h8300/Kconfig
@@ -213,6 +213,8 @@ source "drivers/hwmon/Kconfig"
 
 source "drivers/usb/Kconfig"
 
+source "drivers/uwb/Kconfig"
+
 endmenu
 
 source "fs/Kconfig"
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 59f33fa6af3..9b399a1bae8 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -78,6 +78,8 @@ source "drivers/hid/Kconfig"
 
 source "drivers/usb/Kconfig"
 
+source "drivers/uwb/Kconfig"
+
 source "drivers/mmc/Kconfig"
 
 source "drivers/memstick/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index 2735bde7347..1a6930f9726 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -99,3 +99,4 @@ obj-$(CONFIG_OF)		+= of/
 obj-$(CONFIG_SSB)		+= ssb/
 obj-$(CONFIG_VIRTIO)		+= virtio/
 obj-$(CONFIG_REGULATOR)		+= regulator/
+obj-$(CONFIG_UWB)		+= uwb/
diff --git a/drivers/uwb/Kconfig b/drivers/uwb/Kconfig
new file mode 100644
index 00000000000..3f01a69daf8
--- /dev/null
+++ b/drivers/uwb/Kconfig
@@ -0,0 +1,28 @@
+#
+# UWB device configuration
+#
+
+menuconfig UWB
+	tristate "Ultra Wide Band devices"
+	depends on PCI
+	default n
+	help
+	  UWB is a high-bandwidth, low-power, point-to-point radio
+	  technology using a wide spectrum (3.1-10.6GHz). It is
+	  optimized for in-room use (480Mbps at 2 meters, 110Mbps at
+	  10m). It serves as the transport layer for other protocols,
+	  such as Wireless USB (WUSB), IP (WLP) and upcoming
+	  Bluetooth and 1394
+
+	  The topology is peer to peer; however, higher level
+	  protocols (such as WUSB) might impose a master/slave
+	  relationship.
+
+	  Say Y here if your computer has UWB radio controllers (USB or PCI)
+	  based. You will need to enable the radio controllers
+	  below.  It is ok to select all of them, no harm done.
+
+	  For more help check the UWB and WUSB related files in
+	  <file:Documentation/usb/>.
+
+	  To compile the UWB stack as a module, choose M here.
diff --git a/drivers/uwb/Makefile b/drivers/uwb/Makefile
new file mode 100644
index 00000000000..9a67be5ac5c
--- /dev/null
+++ b/drivers/uwb/Makefile
@@ -0,0 +1,20 @@
+obj-$(CONFIG_UWB)		+= uwb.o
+
+uwb-objs :=		\
+	address.o	\
+	beacon.o	\
+	driver.o	\
+	drp.o		\
+	drp-avail.o	\
+	drp-ie.o	\
+	est.o		\
+	ie.o		\
+	lc-dev.o	\
+	lc-rc.o		\
+	neh.o		\
+	pal.o		\
+	reset.o		\
+	rsv.o		\
+	scan.o		\
+	uwb-debug.o	\
+	uwbd.o