From: Sergei Shtylyov Date: Mon, 9 Jul 2007 21:17:55 +0000 (+0200) Subject: hpt366: simplify UltraDMA filtering (take 4) X-Git-Tag: v2.6.23-rc1~1222 X-Git-Url: http://www.pilppa.org/gitweb/gitweb.cgi?a=commitdiff_plain;h=2648e5d9a80d8a020feb343c52a8704e978e60c6;p=linux-2.6-omap-h63xx.git hpt366: simplify UltraDMA filtering (take 4) Simplify UltraDMA mode filtering in the driver: - make use of the newly introduced 'udma_mask' field of 'ide_pci_device_t' to set the correct hwif->ultra_mask, modifying init_setup_hpt366() to select the correct mask based on the chip revision; - replace 'max_mode' field of the 'struct hpt_info' with 'max_ultra' specifying the maximum UltraDMA mode allowed; - rewrite hpt3xx_udma_filter() to differ the filters based on the 'chip_type' field, and only use it for HPT366 and HPT370[A] where it's really necessary. Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index 65018814ed7..ce363c92361 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/hpt366.c Version 1.06 Jun 27, 2007 + * linux/drivers/ide/pci/hpt366.c Version 1.10 Jun 29, 2007 * * Copyright (C) 1999-2003 Andre Hedrick * Portions Copyright (C) 2001 Sun Microsystems, Inc. @@ -77,7 +77,7 @@ * since they may tamper with its fields * - prefix the driver startup messages with the real chip name * - claim the extra 240 bytes of I/O space for all chips - * - optimize the rate masking/filtering and the drive list lookup code + * - optimize the UltraDMA filtering and the drive list lookup code * - use pci_get_slot() to get to the function 1 of HPT36x/374 * - cache offset of the channel's misc. control registers (MCRs) being used * throughout the driver @@ -99,9 +99,9 @@ * stop duplicating it for each channel by storing the pointer in the pci_dev * structure: first, at the init_setup stage, point it to a static "template" * with only the chip type and its specific base DPLL frequency, the highest - * supported DMA mode, and the chip settings table pointer filled, then, at - * the init_chipset stage, allocate per-chip instance and fill it with the - * rest of the necessary information + * UltraDMA mode, and the chip settings table pointer filled, then, at the + * init_chipset stage, allocate per-chip instance and fill it with the rest + * of the necessary information * - get rid of the constant thresholds in the HPT37x PCI clock detection code, * switch to calculating PCI clock frequency based on the chip's base DPLL * frequency @@ -112,6 +112,7 @@ * also fixing the interchanged 25/40 MHz PCI clock cases for HPT36x chips; * unify HPT36x/37x timing setup code and the speedproc handlers by joining * the register setting lists into the table indexed by the clock selected + * - set the correct hwif->ultra_mask for each individual chip * Sergei Shtylyov, or */ @@ -391,7 +392,7 @@ enum ata_clock { struct hpt_info { u8 chip_type; /* Chip type */ - u8 max_mode; /* Speeds allowed */ + u8 max_ultra; /* Max. UltraDMA mode allowed */ u8 dpll_clk; /* DPLL clock in MHz */ u8 pci_clk; /* PCI clock in MHz */ u32 **settings; /* Chipset settings table */ @@ -430,77 +431,77 @@ static u32 *hpt37x_settings[NUM_ATA_CLOCKS] = { static struct hpt_info hpt36x __devinitdata = { .chip_type = HPT36x, - .max_mode = (HPT366_ALLOW_ATA66_4 || HPT366_ALLOW_ATA66_3) ? 2 : 1, + .max_ultra = HPT366_ALLOW_ATA66_3 ? (HPT366_ALLOW_ATA66_4 ? 4 : 3) : 2, .dpll_clk = 0, /* no DPLL */ .settings = hpt36x_settings }; static struct hpt_info hpt370 __devinitdata = { .chip_type = HPT370, - .max_mode = HPT370_ALLOW_ATA100_5 ? 3 : 2, + .max_ultra = HPT370_ALLOW_ATA100_5 ? 5 : 4, .dpll_clk = 48, .settings = hpt37x_settings }; static struct hpt_info hpt370a __devinitdata = { .chip_type = HPT370A, - .max_mode = HPT370_ALLOW_ATA100_5 ? 3 : 2, + .max_ultra = HPT370_ALLOW_ATA100_5 ? 5 : 4, .dpll_clk = 48, .settings = hpt37x_settings }; static struct hpt_info hpt374 __devinitdata = { .chip_type = HPT374, - .max_mode = 3, + .max_ultra = 5, .dpll_clk = 48, .settings = hpt37x_settings }; static struct hpt_info hpt372 __devinitdata = { .chip_type = HPT372, - .max_mode = HPT372_ALLOW_ATA133_6 ? 4 : 3, + .max_ultra = HPT372_ALLOW_ATA133_6 ? 6 : 5, .dpll_clk = 55, .settings = hpt37x_settings }; static struct hpt_info hpt372a __devinitdata = { .chip_type = HPT372A, - .max_mode = HPT372_ALLOW_ATA133_6 ? 4 : 3, + .max_ultra = HPT372_ALLOW_ATA133_6 ? 6 : 5, .dpll_clk = 66, .settings = hpt37x_settings }; static struct hpt_info hpt302 __devinitdata = { .chip_type = HPT302, - .max_mode = HPT302_ALLOW_ATA133_6 ? 4 : 3, + .max_ultra = HPT372_ALLOW_ATA133_6 ? 6 : 5, .dpll_clk = 66, .settings = hpt37x_settings }; static struct hpt_info hpt371 __devinitdata = { .chip_type = HPT371, - .max_mode = HPT371_ALLOW_ATA133_6 ? 4 : 3, + .max_ultra = HPT371_ALLOW_ATA133_6 ? 6 : 5, .dpll_clk = 66, .settings = hpt37x_settings }; static struct hpt_info hpt372n __devinitdata = { .chip_type = HPT372N, - .max_mode = HPT372_ALLOW_ATA133_6 ? 4 : 3, + .max_ultra = HPT372_ALLOW_ATA133_6 ? 6 : 5, .dpll_clk = 77, .settings = hpt37x_settings }; static struct hpt_info hpt302n __devinitdata = { .chip_type = HPT302N, - .max_mode = HPT302_ALLOW_ATA133_6 ? 4 : 3, + .max_ultra = HPT302_ALLOW_ATA133_6 ? 6 : 5, .dpll_clk = 77, .settings = hpt37x_settings }; static struct hpt_info hpt371n __devinitdata = { .chip_type = HPT371N, - .max_mode = HPT371_ALLOW_ATA133_6 ? 4 : 3, + .max_ultra = HPT371_ALLOW_ATA133_6 ? 6 : 5, .dpll_clk = 77, .settings = hpt37x_settings }; @@ -523,53 +524,38 @@ static int check_in_drive_list(ide_drive_t *drive, const char **list) static u8 hpt3xx_udma_filter(ide_drive_t *drive) { struct hpt_info *info = pci_get_drvdata(HWIF(drive)->pci_dev); - u8 chip_type = info->chip_type; - u8 mode = info->max_mode; u8 mask; - switch (mode) { - case 0x04: - mask = 0x7f; - break; - case 0x03: + switch (info->chip_type) { + case HPT370A: + if (!HPT370_ALLOW_ATA100_5 || + check_in_drive_list(drive, bad_ata100_5)) + return 0x1f; + else + return 0x3f; + case HPT370: + if (!HPT370_ALLOW_ATA100_5 || + check_in_drive_list(drive, bad_ata100_5)) + mask = 0x1f; + else mask = 0x3f; - if (chip_type >= HPT374) - break; - if (!check_in_drive_list(drive, bad_ata100_5)) - goto check_bad_ata33; - /* fall thru */ - case 0x02: + break; + case HPT36x: + if (!HPT366_ALLOW_ATA66_4 || + check_in_drive_list(drive, bad_ata66_4)) + mask = 0x0f; + else mask = 0x1f; - /* - * CHECK ME, Does this need to be changed to HPT374 ?? - */ - if (chip_type >= HPT370) - goto check_bad_ata33; - if (HPT366_ALLOW_ATA66_4 && - !check_in_drive_list(drive, bad_ata66_4)) - goto check_bad_ata33; - - mask = 0x0f; - if (HPT366_ALLOW_ATA66_3 && - !check_in_drive_list(drive, bad_ata66_3)) - goto check_bad_ata33; - /* fall thru */ - case 0x01: + if (!HPT366_ALLOW_ATA66_3 || + check_in_drive_list(drive, bad_ata66_3)) mask = 0x07; - - check_bad_ata33: - if (chip_type >= HPT370A) - break; - if (!check_in_drive_list(drive, bad_ata33)) - break; - /* fall thru */ - case 0x00: - default: - mask = 0x00; - break; + break; + default: + return 0x7f; } - return mask; + + return check_in_drive_list(drive, bad_ata33) ? 0x00 : mask; } static u32 get_speed_setting(u8 speed, struct hpt_info *info) @@ -1150,7 +1136,7 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha * Select 66 MHz DPLL clock only if UltraATA/133 mode is * supported/enabled, use 50 MHz DPLL clock otherwise... */ - if (info->max_mode == 0x04) { + if (info->max_ultra == 6) { dpll_clk = 66; clock = ATA_CLOCK_66MHZ; } else if (dpll_clk) { /* HPT36x chips don't have DPLL */ @@ -1243,7 +1229,7 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) struct pci_dev *dev = hwif->pci_dev; struct hpt_info *info = pci_get_drvdata(dev); int serialize = HPT_SERIALIZE_IO; - u8 scr1 = 0, ata66 = (hwif->channel) ? 0x01 : 0x02; + u8 scr1 = 0, ata66 = hwif->channel ? 0x01 : 0x02; u8 chip_type = info->chip_type; u8 new_mcr, old_mcr = 0; @@ -1256,7 +1242,9 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) hwif->intrproc = &hpt3xx_intrproc; hwif->maskproc = &hpt3xx_maskproc; hwif->busproc = &hpt3xx_busproc; - hwif->udma_filter = &hpt3xx_udma_filter; + + if (chip_type <= HPT370A) + hwif->udma_filter = &hpt3xx_udma_filter; /* * HPT3xxN chips have some complications: @@ -1305,7 +1293,7 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) return; } - hwif->ultra_mask = 0x7f; + hwif->ultra_mask = hwif->cds->udma_mask; hwif->mwdma_mask = 0x07; /* @@ -1503,9 +1491,35 @@ static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d) pci_read_config_byte(dev, PCI_REVISION_ID, &rev); - if (rev > 6) + switch (rev) { + case 0: + case 1: + case 2: + /* + * HPT36x chips have one channel per function and have + * both channel enable bits located differently and visible + * to both functions -- really stupid design decision... :-( + * Bit 4 is for the primary channel, bit 5 for the secondary. + */ + d->channels = 1; + d->enablebits[0].mask = d->enablebits[0].val = 0x10; + + d->udma_mask = HPT366_ALLOW_ATA66_3 ? + (HPT366_ALLOW_ATA66_4 ? 0x1f : 0x0f) : 0x07; + break; + case 3: + case 4: + d->udma_mask = HPT370_ALLOW_ATA100_5 ? 0x3f : 0x1f; + break; + default: rev = 6; - + /* fall thru */ + case 5: + case 6: + d->udma_mask = HPT372_ALLOW_ATA133_6 ? 0x7f : 0x3f; + break; + } + d->name = chipset_names[rev]; pci_set_drvdata(dev, info[rev]); @@ -1513,15 +1527,6 @@ static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d) if (rev > 2) goto init_single; - /* - * HPT36x chips have one channel per function and have - * both channel enable bits located differently and visible - * to both functions -- really stupid design decision... :-( - * Bit 4 is for the primary channel, bit 5 for the secondary. - */ - d->channels = 1; - d->enablebits[0].mask = d->enablebits[0].val = 0x10; - if ((dev2 = pci_get_slot(dev->bus, dev->devfn + 1)) != NULL) { u8 mcr1 = 0, pin1 = 0, pin2 = 0; int ret; @@ -1573,6 +1578,7 @@ static ide_pci_device_t hpt366_chipsets[] __devinitdata = { .channels = 2, .autodma = AUTODMA, .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, + .udma_mask = HPT372_ALLOW_ATA133_6 ? 0x7f : 0x3f, .bootable = OFF_BOARD, .extra = 240 },{ /* 2 */ @@ -1584,6 +1590,7 @@ static ide_pci_device_t hpt366_chipsets[] __devinitdata = { .channels = 2, .autodma = AUTODMA, .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, + .udma_mask = HPT302_ALLOW_ATA133_6 ? 0x7f : 0x3f, .bootable = OFF_BOARD, .extra = 240 },{ /* 3 */ @@ -1595,6 +1602,7 @@ static ide_pci_device_t hpt366_chipsets[] __devinitdata = { .channels = 2, .autodma = AUTODMA, .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, + .udma_mask = HPT371_ALLOW_ATA133_6 ? 0x7f : 0x3f, .bootable = OFF_BOARD, .extra = 240 },{ /* 4 */ @@ -1606,6 +1614,7 @@ static ide_pci_device_t hpt366_chipsets[] __devinitdata = { .channels = 2, /* 4 */ .autodma = AUTODMA, .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, + .udma_mask = 0x3f, .bootable = OFF_BOARD, .extra = 240 },{ /* 5 */ @@ -1617,6 +1626,7 @@ static ide_pci_device_t hpt366_chipsets[] __devinitdata = { .channels = 2, /* 4 */ .autodma = AUTODMA, .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, + .udma_mask = HPT372_ALLOW_ATA133_6 ? 0x7f : 0x3f, .bootable = OFF_BOARD, .extra = 240 }