From: Tony Luck Date: Fri, 20 Jul 2007 18:22:30 +0000 (-0700) Subject: [IA64] Convert to generic timekeeping/clocksource X-Git-Tag: v2.6.23-rc1~198^2~1^2~1 X-Git-Url: http://www.pilppa.org/gitweb/gitweb.cgi?a=commitdiff_plain;h=0aa366f351d044703e25c8425e508170e80d83b1;p=linux-2.6-omap-h63xx.git [IA64] Convert to generic timekeeping/clocksource This is a merge of Peter Keilty's initial patch (which was revived by Bob Picco) for this with Hidetoshi Seto's fixes and scaling improvements. Acked-by: Bob Picco Signed-off-by: Tony Luck --- diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 9a541486fb7..68115d7b0a7 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1154,6 +1154,8 @@ and is between 256 and 4096 characters. It is defined in the file nointroute [IA-64] + nojitter [IA64] Disables jitter checking for ITC timers. + nolapic [IA-32,APIC] Do not enable or use the local APIC. nolapic_timer [IA-32,APIC] Do not use the local APIC timer. diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 616c96e7348..36c7b9682aa 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -62,7 +62,11 @@ config GENERIC_CALIBRATE_DELAY bool default y -config TIME_INTERPOLATION +config GENERIC_TIME + bool + default y + +config GENERIC_TIME_VSYSCALL bool default y diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig index 90e9c2e61bf..9eb48c0927b 100644 --- a/arch/ia64/configs/bigsur_defconfig +++ b/arch/ia64/configs/bigsur_defconfig @@ -85,7 +85,7 @@ CONFIG_MMU=y CONFIG_SWIOTLB=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_TIME_INTERPOLATION=y +CONFIG_GENERIC_TIME=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig index 0d29aa2066b..3a9ed951db0 100644 --- a/arch/ia64/configs/gensparse_defconfig +++ b/arch/ia64/configs/gensparse_defconfig @@ -86,7 +86,7 @@ CONFIG_MMU=y CONFIG_SWIOTLB=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_TIME_INTERPOLATION=y +CONFIG_GENERIC_TIME=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y diff --git a/arch/ia64/configs/sim_defconfig b/arch/ia64/configs/sim_defconfig index d9146c31ea1..c420d9f3df9 100644 --- a/arch/ia64/configs/sim_defconfig +++ b/arch/ia64/configs/sim_defconfig @@ -86,7 +86,7 @@ CONFIG_MMU=y CONFIG_SWIOTLB=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_TIME_INTERPOLATION=y +CONFIG_GENERIC_TIME=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig index 64e951de4e5..4c9ffc47bc7 100644 --- a/arch/ia64/configs/sn2_defconfig +++ b/arch/ia64/configs/sn2_defconfig @@ -93,7 +93,7 @@ CONFIG_SWIOTLB=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_TIME_INTERPOLATION=y +CONFIG_GENERIC_TIME=y CONFIG_DMI=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig index a1446931b40..e208747d5de 100644 --- a/arch/ia64/configs/tiger_defconfig +++ b/arch/ia64/configs/tiger_defconfig @@ -98,7 +98,7 @@ CONFIG_RWSEM_XCHGADD_ALGORITHM=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_TIME_INTERPOLATION=y +CONFIG_GENERIC_TIME=y CONFIG_DMI=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig index 1c7955c1635..4a060fc3993 100644 --- a/arch/ia64/configs/zx1_defconfig +++ b/arch/ia64/configs/zx1_defconfig @@ -96,7 +96,7 @@ CONFIG_RWSEM_XCHGADD_ALGORITHM=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_TIME_INTERPOLATION=y +CONFIG_GENERIC_TIME=y CONFIG_DMI=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig index 90bd9601cdd..461f8ee738f 100644 --- a/arch/ia64/defconfig +++ b/arch/ia64/defconfig @@ -98,7 +98,7 @@ CONFIG_RWSEM_XCHGADD_ALGORITHM=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_TIME_INTERPOLATION=y +CONFIG_GENERIC_TIME=y CONFIG_DMI=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y diff --git a/arch/ia64/kernel/asm-offsets.c b/arch/ia64/kernel/asm-offsets.c index 2236fabbb3c..0aebc6f79e9 100644 --- a/arch/ia64/kernel/asm-offsets.c +++ b/arch/ia64/kernel/asm-offsets.c @@ -7,6 +7,7 @@ #define ASM_OFFSETS_C 1 #include +#include #include #include @@ -15,6 +16,7 @@ #include #include "../kernel/sigframe.h" +#include "../kernel/fsyscall_gtod_data.h" #define DEFINE(sym, val) \ asm volatile("\n->" #sym " %0 " #val : : "i" (val)) @@ -256,17 +258,24 @@ void foo(void) BLANK(); /* used by fsys_gettimeofday in arch/ia64/kernel/fsys.S */ - DEFINE(IA64_TIME_INTERPOLATOR_ADDRESS_OFFSET, offsetof (struct time_interpolator, addr)); - DEFINE(IA64_TIME_INTERPOLATOR_SOURCE_OFFSET, offsetof (struct time_interpolator, source)); - DEFINE(IA64_TIME_INTERPOLATOR_SHIFT_OFFSET, offsetof (struct time_interpolator, shift)); - DEFINE(IA64_TIME_INTERPOLATOR_NSEC_OFFSET, offsetof (struct time_interpolator, nsec_per_cyc)); - DEFINE(IA64_TIME_INTERPOLATOR_OFFSET_OFFSET, offsetof (struct time_interpolator, offset)); - DEFINE(IA64_TIME_INTERPOLATOR_LAST_CYCLE_OFFSET, offsetof (struct time_interpolator, last_cycle)); - DEFINE(IA64_TIME_INTERPOLATOR_LAST_COUNTER_OFFSET, offsetof (struct time_interpolator, last_counter)); - DEFINE(IA64_TIME_INTERPOLATOR_JITTER_OFFSET, offsetof (struct time_interpolator, jitter)); - DEFINE(IA64_TIME_INTERPOLATOR_MASK_OFFSET, offsetof (struct time_interpolator, mask)); - DEFINE(IA64_TIME_SOURCE_CPU, TIME_SOURCE_CPU); - DEFINE(IA64_TIME_SOURCE_MMIO64, TIME_SOURCE_MMIO64); - DEFINE(IA64_TIME_SOURCE_MMIO32, TIME_SOURCE_MMIO32); - DEFINE(IA64_TIMESPEC_TV_NSEC_OFFSET, offsetof (struct timespec, tv_nsec)); + DEFINE(IA64_GTOD_LOCK_OFFSET, + offsetof (struct fsyscall_gtod_data_t, lock)); + DEFINE(IA64_GTOD_WALL_TIME_OFFSET, + offsetof (struct fsyscall_gtod_data_t, wall_time)); + DEFINE(IA64_GTOD_MONO_TIME_OFFSET, + offsetof (struct fsyscall_gtod_data_t, monotonic_time)); + DEFINE(IA64_CLKSRC_MASK_OFFSET, + offsetof (struct fsyscall_gtod_data_t, clk_mask)); + DEFINE(IA64_CLKSRC_MULT_OFFSET, + offsetof (struct fsyscall_gtod_data_t, clk_mult)); + DEFINE(IA64_CLKSRC_SHIFT_OFFSET, + offsetof (struct fsyscall_gtod_data_t, clk_shift)); + DEFINE(IA64_CLKSRC_MMIO_OFFSET, + offsetof (struct fsyscall_gtod_data_t, clk_fsys_mmio)); + DEFINE(IA64_CLKSRC_CYCLE_LAST_OFFSET, + offsetof (struct fsyscall_gtod_data_t, clk_cycle_last)); + DEFINE(IA64_ITC_JITTER_OFFSET, + offsetof (struct itc_jitter_data_t, itc_jitter)); + DEFINE(IA64_ITC_LASTCYCLE_OFFSET, + offsetof (struct itc_jitter_data_t, itc_lastcycle)); } diff --git a/arch/ia64/kernel/cyclone.c b/arch/ia64/kernel/cyclone.c index e00b21514f7..2fd96d9062a 100644 --- a/arch/ia64/kernel/cyclone.c +++ b/arch/ia64/kernel/cyclone.c @@ -3,6 +3,7 @@ #include #include #include +#include #include /* IBM Summit (EXA) Cyclone counter code*/ @@ -18,13 +19,21 @@ void __init cyclone_setup(void) use_cyclone = 1; } +static void __iomem *cyclone_mc; -struct time_interpolator cyclone_interpolator = { - .source = TIME_SOURCE_MMIO64, - .shift = 16, - .frequency = CYCLONE_TIMER_FREQ, - .drift = -100, - .mask = (1LL << 40) - 1 +static cycle_t read_cyclone(void) +{ + return (cycle_t)readq((void __iomem *)cyclone_mc); +} + +static struct clocksource clocksource_cyclone = { + .name = "cyclone", + .rating = 300, + .read = read_cyclone, + .mask = (1LL << 40) - 1, + .mult = 0, /*to be caluclated*/ + .shift = 16, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; int __init init_cyclone_clock(void) @@ -44,13 +53,15 @@ int __init init_cyclone_clock(void) offset = (CYCLONE_CBAR_ADDR); reg = (u64*)ioremap_nocache(offset, sizeof(u64)); if(!reg){ - printk(KERN_ERR "Summit chipset: Could not find valid CBAR register.\n"); + printk(KERN_ERR "Summit chipset: Could not find valid CBAR" + " register.\n"); use_cyclone = 0; return -ENODEV; } base = readq(reg); if(!base){ - printk(KERN_ERR "Summit chipset: Could not find valid CBAR value.\n"); + printk(KERN_ERR "Summit chipset: Could not find valid CBAR" + " value.\n"); use_cyclone = 0; return -ENODEV; } @@ -60,7 +71,8 @@ int __init init_cyclone_clock(void) offset = (base + CYCLONE_PMCC_OFFSET); reg = (u64*)ioremap_nocache(offset, sizeof(u64)); if(!reg){ - printk(KERN_ERR "Summit chipset: Could not find valid PMCC register.\n"); + printk(KERN_ERR "Summit chipset: Could not find valid PMCC" + " register.\n"); use_cyclone = 0; return -ENODEV; } @@ -71,7 +83,8 @@ int __init init_cyclone_clock(void) offset = (base + CYCLONE_MPCS_OFFSET); reg = (u64*)ioremap_nocache(offset, sizeof(u64)); if(!reg){ - printk(KERN_ERR "Summit chipset: Could not find valid MPCS register.\n"); + printk(KERN_ERR "Summit chipset: Could not find valid MPCS" + " register.\n"); use_cyclone = 0; return -ENODEV; } @@ -82,7 +95,8 @@ int __init init_cyclone_clock(void) offset = (base + CYCLONE_MPMC_OFFSET); cyclone_timer = (u32*)ioremap_nocache(offset, sizeof(u32)); if(!cyclone_timer){ - printk(KERN_ERR "Summit chipset: Could not find valid MPMC register.\n"); + printk(KERN_ERR "Summit chipset: Could not find valid MPMC" + " register.\n"); use_cyclone = 0; return -ENODEV; } @@ -93,7 +107,8 @@ int __init init_cyclone_clock(void) int stall = 100; while(stall--) barrier(); if(readl(cyclone_timer) == old){ - printk(KERN_ERR "Summit chipset: Counter not counting! DISABLED\n"); + printk(KERN_ERR "Summit chipset: Counter not counting!" + " DISABLED\n"); iounmap(cyclone_timer); cyclone_timer = 0; use_cyclone = 0; @@ -101,8 +116,11 @@ int __init init_cyclone_clock(void) } } /* initialize last tick */ - cyclone_interpolator.addr = cyclone_timer; - register_time_interpolator(&cyclone_interpolator); + cyclone_mc = cyclone_timer; + clocksource_cyclone.fsys_mmio = cyclone_timer; + clocksource_cyclone.mult = clocksource_hz2mult(CYCLONE_TIMER_FREQ, + clocksource_cyclone.shift); + clocksource_register(&clocksource_cyclone); return 0; } diff --git a/arch/ia64/kernel/fsys.S b/arch/ia64/kernel/fsys.S index 3f926c2dc70..44841971f07 100644 --- a/arch/ia64/kernel/fsys.S +++ b/arch/ia64/kernel/fsys.S @@ -147,12 +147,11 @@ ENTRY(fsys_set_tid_address) FSYS_RETURN END(fsys_set_tid_address) -/* - * Ensure that the time interpolator structure is compatible with the asm code - */ -#if IA64_TIME_INTERPOLATOR_SOURCE_OFFSET !=0 || IA64_TIME_INTERPOLATOR_SHIFT_OFFSET != 2 \ - || IA64_TIME_INTERPOLATOR_JITTER_OFFSET != 3 || IA64_TIME_INTERPOLATOR_NSEC_OFFSET != 4 -#error fsys_gettimeofday incompatible with changes to struct time_interpolator +#if IA64_GTOD_LOCK_OFFSET !=0 +#error fsys_gettimeofday incompatible with changes to struct fsyscall_gtod_data_t +#endif +#if IA64_ITC_JITTER_OFFSET !=0 +#error fsys_gettimeofday incompatible with changes to struct itc_jitter_data_t #endif #define CLOCK_REALTIME 0 #define CLOCK_MONOTONIC 1 @@ -179,126 +178,124 @@ ENTRY(fsys_gettimeofday) // r11 = preserved: saved ar.pfs // r12 = preserved: memory stack // r13 = preserved: thread pointer - // r14 = address of mask / mask + // r14 = address of mask / mask value // r15 = preserved: system call number // r16 = preserved: current task pointer - // r17 = wall to monotonic use - // r18 = time_interpolator->offset - // r19 = address of wall_to_monotonic - // r20 = pointer to struct time_interpolator / pointer to time_interpolator->address - // r21 = shift factor - // r22 = address of time interpolator->last_counter - // r23 = address of time_interpolator->last_cycle - // r24 = adress of time_interpolator->offset - // r25 = last_cycle value - // r26 = last_counter value - // r27 = pointer to xtime + // r17 = (not used) + // r18 = (not used) + // r19 = address of itc_lastcycle + // r20 = struct fsyscall_gtod_data (= address of gtod_lock.sequence) + // r21 = address of mmio_ptr + // r22 = address of wall_time or monotonic_time + // r23 = address of shift / value + // r24 = address mult factor / cycle_last value + // r25 = itc_lastcycle value + // r26 = address clocksource cycle_last + // r27 = (not used) // r28 = sequence number at the beginning of critcal section - // r29 = address of seqlock + // r29 = address of itc_jitter // r30 = time processing flags / memory address // r31 = pointer to result // Predicates // p6,p7 short term use // p8 = timesource ar.itc // p9 = timesource mmio64 - // p10 = timesource mmio32 + // p10 = timesource mmio32 - not used // p11 = timesource not to be handled by asm code - // p12 = memory time source ( = p9 | p10) - // p13 = do cmpxchg with time_interpolator_last_cycle + // p12 = memory time source ( = p9 | p10) - not used + // p13 = do cmpxchg with itc_lastcycle // p14 = Divide by 1000 // p15 = Add monotonic // - // Note that instructions are optimized for McKinley. McKinley can process two - // bundles simultaneously and therefore we continuously try to feed the CPU - // two bundles and then a stop. - tnat.nz p6,p0 = r31 // branch deferred since it does not fit into bundle structure + // Note that instructions are optimized for McKinley. McKinley can + // process two bundles simultaneously and therefore we continuously + // try to feed the CPU two bundles and then a stop. + // + // Additional note that code has changed a lot. Optimization is TBD. + // Comments begin with "?" are maybe outdated. + tnat.nz p6,p0 = r31 // ? branch deferred to fit later bundle mov pr = r30,0xc000 // Set predicates according to function add r2 = TI_FLAGS+IA64_TASK_SIZE,r16 - movl r20 = time_interpolator + movl r20 = fsyscall_gtod_data // load fsyscall gettimeofday data address ;; - ld8 r20 = [r20] // get pointer to time_interpolator structure - movl r29 = xtime_lock + movl r29 = itc_jitter_data // itc_jitter + add r22 = IA64_GTOD_WALL_TIME_OFFSET,r20 // wall_time ld4 r2 = [r2] // process work pending flags - movl r27 = xtime - ;; // only one bundle here - ld8 r21 = [r20] // first quad with control information + ;; +(p15) add r22 = IA64_GTOD_MONO_TIME_OFFSET,r20 // monotonic_time + add r21 = IA64_CLKSRC_MMIO_OFFSET,r20 + add r19 = IA64_ITC_LASTCYCLE_OFFSET,r29 and r2 = TIF_ALLWORK_MASK,r2 -(p6) br.cond.spnt.few .fail_einval // deferred branch +(p6) br.cond.spnt.few .fail_einval // ? deferred branch ;; - add r10 = IA64_TIME_INTERPOLATOR_ADDRESS_OFFSET,r20 - extr r3 = r21,32,32 // time_interpolator->nsec_per_cyc - extr r8 = r21,0,16 // time_interpolator->source + add r26 = IA64_CLKSRC_CYCLE_LAST_OFFSET,r20 // clksrc_cycle_last cmp.ne p6, p0 = 0, r2 // Fallback if work is scheduled (p6) br.cond.spnt.many fsys_fallback_syscall ;; - cmp.eq p8,p12 = 0,r8 // Check for cpu timer - cmp.eq p9,p0 = 1,r8 // MMIO64 ? - extr r2 = r21,24,8 // time_interpolator->jitter - cmp.eq p10,p0 = 2,r8 // MMIO32 ? - cmp.ltu p11,p0 = 2,r8 // function or other clock -(p11) br.cond.spnt.many fsys_fallback_syscall + // Begin critical section +.time_redo: + ld4.acq r28 = [r20] // gtod_lock.sequence, Must take first + ;; + and r28 = ~1,r28 // And make sequence even to force retry if odd ;; - setf.sig f7 = r3 // Setup for scaling of counter -(p15) movl r19 = wall_to_monotonic -(p12) ld8 r30 = [r10] - cmp.ne p13,p0 = r2,r0 // need jitter compensation? - extr r21 = r21,16,8 // shift factor + ld8 r30 = [r21] // clocksource->mmio_ptr + add r24 = IA64_CLKSRC_MULT_OFFSET,r20 + ld4 r2 = [r29] // itc_jitter value + add r23 = IA64_CLKSRC_SHIFT_OFFSET,r20 + add r14 = IA64_CLKSRC_MASK_OFFSET,r20 ;; -.time_redo: - .pred.rel.mutex p8,p9,p10 - ld4.acq r28 = [r29] // xtime_lock.sequence. Must come first for locking purposes + ld4 r3 = [r24] // clocksource mult value + ld8 r14 = [r14] // clocksource mask value + cmp.eq p8,p9 = 0,r30 // use cpu timer if no mmio_ptr ;; - and r28 = ~1,r28 // Make sequence even to force retry if odd + setf.sig f7 = r3 // Setup for mult scaling of counter +(p8) cmp.ne p13,p0 = r2,r0 // need itc_jitter compensation, set p13 + ld4 r23 = [r23] // clocksource shift value + ld8 r24 = [r26] // get clksrc_cycle_last value +(p9) cmp.eq p13,p0 = 0,r30 // if mmio_ptr, clear p13 jitter control ;; + .pred.rel.mutex p8,p9 (p8) mov r2 = ar.itc // CPU_TIMER. 36 clocks latency!!! - add r22 = IA64_TIME_INTERPOLATOR_LAST_COUNTER_OFFSET,r20 -(p9) ld8 r2 = [r30] // readq(ti->address). Could also have latency issues.. -(p10) ld4 r2 = [r30] // readw(ti->address) -(p13) add r23 = IA64_TIME_INTERPOLATOR_LAST_CYCLE_OFFSET,r20 - ;; // could be removed by moving the last add upward - ld8 r26 = [r22] // time_interpolator->last_counter -(p13) ld8 r25 = [r23] // time interpolator->last_cycle - add r24 = IA64_TIME_INTERPOLATOR_OFFSET_OFFSET,r20 -(p15) ld8 r17 = [r19],IA64_TIMESPEC_TV_NSEC_OFFSET - ld8 r9 = [r27],IA64_TIMESPEC_TV_NSEC_OFFSET - add r14 = IA64_TIME_INTERPOLATOR_MASK_OFFSET, r20 - ;; - ld8 r18 = [r24] // time_interpolator->offset - ld8 r8 = [r27],-IA64_TIMESPEC_TV_NSEC_OFFSET // xtime.tv_nsec -(p13) sub r3 = r25,r2 // Diff needed before comparison (thanks davidm) - ;; - ld8 r14 = [r14] // time_interpolator->mask -(p13) cmp.gt.unc p6,p7 = r3,r0 // check if it is less than last. p6,p7 cleared - sub r10 = r2,r26 // current_counter - last_counter - ;; -(p6) sub r10 = r25,r26 // time we got was less than last_cycle +(p9) ld8 r2 = [r30] // MMIO_TIMER. Could also have latency issues.. +(p13) ld8 r25 = [r19] // get itc_lastcycle value + ;; // ? could be removed by moving the last add upward + ld8 r9 = [r22],IA64_TIMESPEC_TV_NSEC_OFFSET // tv_sec + ;; + ld8 r8 = [r22],-IA64_TIMESPEC_TV_NSEC_OFFSET // tv_nsec +(p13) sub r3 = r25,r2 // Diff needed before comparison (thanks davidm) + ;; +(p13) cmp.gt.unc p6,p7 = r3,r0 // check if it is less than last. p6,p7 cleared + sub r10 = r2,r24 // current_cycle - last_cycle + ;; +(p6) sub r10 = r25,r24 // time we got was less than last_cycle (p7) mov ar.ccv = r25 // more than last_cycle. Prep for cmpxchg ;; +(p7) cmpxchg8.rel r3 = [r19],r2,ar.ccv + ;; +(p7) cmp.ne p7,p0 = r25,r3 // if cmpxchg not successful + ;; +(p7) sub r10 = r3,r24 // then use new last_cycle instead + ;; and r10 = r10,r14 // Apply mask ;; setf.sig f8 = r10 nop.i 123 ;; -(p7) cmpxchg8.rel r3 = [r23],r2,ar.ccv -EX(.fail_efault, probe.w.fault r31, 3) // This takes 5 cycles and we have spare time + // fault check takes 5 cycles and we have spare time +EX(.fail_efault, probe.w.fault r31, 3) xmpy.l f8 = f8,f7 // nsec_per_cyc*(counter-last_counter) -(p15) add r9 = r9,r17 // Add wall to monotonic.secs to result secs ;; -(p15) ld8 r17 = [r19],-IA64_TIMESPEC_TV_NSEC_OFFSET -(p7) cmp.ne p7,p0 = r25,r3 // if cmpxchg not successful redo - // simulate tbit.nz.or p7,p0 = r28,0 + // ? simulate tbit.nz.or p7,p0 = r28,0 getf.sig r2 = f8 mf - add r8 = r8,r18 // Add time interpolator offset ;; - ld4 r10 = [r29] // xtime_lock.sequence -(p15) add r8 = r8, r17 // Add monotonic.nsecs to nsecs - shr.u r2 = r2,r21 - ;; // overloaded 3 bundles! - // End critical section. + ld4 r10 = [r20] // gtod_lock.sequence + shr.u r2 = r2,r23 // shift by factor + ;; // ? overloaded 3 bundles! add r8 = r8,r2 // Add xtime.nsecs - cmp4.ne.or p7,p0 = r28,r10 -(p7) br.cond.dpnt.few .time_redo // sequence number changed ? + cmp4.ne p7,p0 = r28,r10 +(p7) br.cond.dpnt.few .time_redo // sequence number changed, redo + // End critical section. // Now r8=tv->tv_nsec and r9=tv->tv_sec mov r10 = r0 movl r2 = 1000000000 @@ -308,19 +305,19 @@ EX(.fail_efault, probe.w.fault r31, 3) // This takes 5 cycles and we have spare .time_normalize: mov r21 = r8 cmp.ge p6,p0 = r8,r2 -(p14) shr.u r20 = r8, 3 // We can repeat this if necessary just wasting some time +(p14) shr.u r20 = r8, 3 // We can repeat this if necessary just wasting time ;; (p14) setf.sig f8 = r20 (p6) sub r8 = r8,r2 -(p6) add r9 = 1,r9 // two nops before the branch. -(p14) setf.sig f7 = r3 // Chances for repeats are 1 in 10000 for gettod +(p6) add r9 = 1,r9 // two nops before the branch. +(p14) setf.sig f7 = r3 // Chances for repeats are 1 in 10000 for gettod (p6) br.cond.dpnt.few .time_normalize ;; // Divided by 8 though shift. Now divide by 125 // The compiler was able to do that with a multiply // and a shift and we do the same -EX(.fail_efault, probe.w.fault r23, 3) // This also costs 5 cycles -(p14) xmpy.hu f8 = f8, f7 // xmpy has 5 cycles latency so use it... +EX(.fail_efault, probe.w.fault r23, 3) // This also costs 5 cycles +(p14) xmpy.hu f8 = f8, f7 // xmpy has 5 cycles latency so use it ;; mov r8 = r0 (p14) getf.sig r2 = f8 diff --git a/arch/ia64/kernel/fsyscall_gtod_data.h b/arch/ia64/kernel/fsyscall_gtod_data.h new file mode 100644 index 00000000000..490dab55fba --- /dev/null +++ b/arch/ia64/kernel/fsyscall_gtod_data.h @@ -0,0 +1,23 @@ +/* + * (c) Copyright 2007 Hewlett-Packard Development Company, L.P. + * Contributed by Peter Keilty + * + * fsyscall gettimeofday data + */ + +struct fsyscall_gtod_data_t { + seqlock_t lock; + struct timespec wall_time; + struct timespec monotonic_time; + cycle_t clk_mask; + u32 clk_mult; + u32 clk_shift; + void *clk_fsys_mmio; + cycle_t clk_cycle_last; +} __attribute__ ((aligned (L1_CACHE_BYTES))); + +struct itc_jitter_data_t { + int itc_jitter; + cycle_t itc_lastcycle; +} __attribute__ ((aligned (L1_CACHE_BYTES))); + diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c index 3486fe7d6e6..627785c48ea 100644 --- a/arch/ia64/kernel/time.c +++ b/arch/ia64/kernel/time.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -28,6 +29,16 @@ #include #include +#include "fsyscall_gtod_data.h" + +static cycle_t itc_get_cycles(void); + +struct fsyscall_gtod_data_t fsyscall_gtod_data = { + .lock = SEQLOCK_UNLOCKED, +}; + +struct itc_jitter_data_t itc_jitter_data; + volatile int time_keeper_id = 0; /* smp_processor_id() of time-keeper */ #ifdef CONFIG_IA64_DEBUG_IRQ @@ -37,11 +48,16 @@ EXPORT_SYMBOL(last_cli_ip); #endif -static struct time_interpolator itc_interpolator = { - .shift = 16, - .mask = 0xffffffffffffffffLL, - .source = TIME_SOURCE_CPU +static struct clocksource clocksource_itc = { + .name = "itc", + .rating = 350, + .read = itc_get_cycles, + .mask = 0xffffffffffffffff, + .mult = 0, /*to be caluclated*/ + .shift = 16, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; +static struct clocksource *itc_clocksource; static irqreturn_t timer_interrupt (int irq, void *dev_id) @@ -210,8 +226,6 @@ ia64_init_itm (void) + itc_freq/2)/itc_freq; if (!(sal_platform_features & IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT)) { - itc_interpolator.frequency = local_cpu_data->itc_freq; - itc_interpolator.drift = itc_drift; #ifdef CONFIG_SMP /* On IA64 in an SMP configuration ITCs are never accurately synchronized. * Jitter compensation requires a cmpxchg which may limit @@ -223,15 +237,50 @@ ia64_init_itm (void) * even going backward) if the ITC offsets between the individual CPUs * are too large. */ - if (!nojitter) itc_interpolator.jitter = 1; + if (!nojitter) + itc_jitter_data.itc_jitter = 1; #endif - register_time_interpolator(&itc_interpolator); } /* Setup the CPU local timer tick */ ia64_cpu_local_tick(); + + if (!itc_clocksource) { + /* Sort out mult/shift values: */ + clocksource_itc.mult = + clocksource_hz2mult(local_cpu_data->itc_freq, + clocksource_itc.shift); + clocksource_register(&clocksource_itc); + itc_clocksource = &clocksource_itc; + } } +static cycle_t itc_get_cycles() +{ + u64 lcycle, now, ret; + + if (!itc_jitter_data.itc_jitter) + return get_cycles(); + + lcycle = itc_jitter_data.itc_lastcycle; + now = get_cycles(); + if (lcycle && time_after(lcycle, now)) + return lcycle; + + /* + * Keep track of the last timer value returned. + * In an SMP environment, you could lose out in contention of + * cmpxchg. If so, your cmpxchg returns new value which the + * winner of contention updated to. Use the new value instead. + */ + ret = cmpxchg(&itc_jitter_data.itc_lastcycle, lcycle, now); + if (unlikely(ret != lcycle)) + return ret; + + return now; +} + + static struct irqaction timer_irqaction = { .handler = timer_interrupt, .flags = IRQF_DISABLED | IRQF_IRQPOLL, @@ -307,3 +356,34 @@ ia64_setup_printk_clock(void) if (!(sal_platform_features & IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT)) ia64_printk_clock = ia64_itc_printk_clock; } + +void update_vsyscall(struct timespec *wall, struct clocksource *c) +{ + unsigned long flags; + + write_seqlock_irqsave(&fsyscall_gtod_data.lock, flags); + + /* copy fsyscall clock data */ + fsyscall_gtod_data.clk_mask = c->mask; + fsyscall_gtod_data.clk_mult = c->mult; + fsyscall_gtod_data.clk_shift = c->shift; + fsyscall_gtod_data.clk_fsys_mmio = c->fsys_mmio; + fsyscall_gtod_data.clk_cycle_last = c->cycle_last; + + /* copy kernel time structures */ + fsyscall_gtod_data.wall_time.tv_sec = wall->tv_sec; + fsyscall_gtod_data.wall_time.tv_nsec = wall->tv_nsec; + fsyscall_gtod_data.monotonic_time.tv_sec = wall_to_monotonic.tv_sec + + wall->tv_sec; + fsyscall_gtod_data.monotonic_time.tv_nsec = wall_to_monotonic.tv_nsec + + wall->tv_nsec; + + /* normalize */ + while (fsyscall_gtod_data.monotonic_time.tv_nsec >= NSEC_PER_SEC) { + fsyscall_gtod_data.monotonic_time.tv_nsec -= NSEC_PER_SEC; + fsyscall_gtod_data.monotonic_time.tv_sec++; + } + + write_sequnlock_irqrestore(&fsyscall_gtod_data.lock, flags); +} + diff --git a/arch/ia64/sn/kernel/sn2/timer.c b/arch/ia64/sn/kernel/sn2/timer.c index 56a88b6df4b..19e25d2b64f 100644 --- a/arch/ia64/sn/kernel/sn2/timer.c +++ b/arch/ia64/sn/kernel/sn2/timer.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include @@ -22,11 +23,21 @@ extern unsigned long sn_rtc_cycles_per_second; -static struct time_interpolator sn2_interpolator = { - .drift = -1, - .shift = 10, - .mask = (1LL << 55) - 1, - .source = TIME_SOURCE_MMIO64 +static void __iomem *sn2_mc; + +static cycle_t read_sn2(void) +{ + return (cycle_t)readq(sn2_mc); +} + +static struct clocksource clocksource_sn2 = { + .name = "sn2_rtc", + .rating = 300, + .read = read_sn2, + .mask = (1LL << 55) - 1, + .mult = 0, + .shift = 10, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; /* @@ -47,9 +58,11 @@ ia64_sn_udelay (unsigned long usecs) void __init sn_timer_init(void) { - sn2_interpolator.frequency = sn_rtc_cycles_per_second; - sn2_interpolator.addr = RTC_COUNTER_ADDR; - register_time_interpolator(&sn2_interpolator); + sn2_mc = RTC_COUNTER_ADDR; + clocksource_sn2.fsys_mmio = RTC_COUNTER_ADDR; + clocksource_sn2.mult = clocksource_hz2mult(sn_rtc_cycles_per_second, + clocksource_sn2.shift); + clocksource_register(&clocksource_sn2); ia64_udelay = &ia64_sn_udelay; } diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 80ffc782991..bb5d23be426 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -475,7 +475,7 @@ static void acpi_processor_idle(void) /* Get end time (ticks) */ t2 = inl(acpi_gbl_FADT.xpm_timer_block.address); -#ifdef CONFIG_GENERIC_TIME +#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86_TSC) /* TSC halts in C2, so notify users */ mark_tsc_unstable("possible TSC halt in C2"); #endif @@ -517,7 +517,7 @@ static void acpi_processor_idle(void) acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0); } -#ifdef CONFIG_GENERIC_TIME +#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86_TSC) /* TSC halts in C3, so notify users */ mark_tsc_unstable("TSC halts in C3"); #endif diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c index 0be700f4e8f..ba0e74ad74b 100644 --- a/drivers/char/hpet.c +++ b/drivers/char/hpet.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include @@ -51,8 +52,34 @@ #define HPET_RANGE_SIZE 1024 /* from HPET spec */ +#if BITS_PER_LONG == 64 +#define write_counter(V, MC) writeq(V, MC) +#define read_counter(MC) readq(MC) +#else +#define write_counter(V, MC) writel(V, MC) +#define read_counter(MC) readl(MC) +#endif + static u32 hpet_nhpet, hpet_max_freq = HPET_USER_FREQ; +static void __iomem *hpet_mctr; + +static cycle_t read_hpet(void) +{ + return (cycle_t)read_counter((void __iomem *)hpet_mctr); +} + +static struct clocksource clocksource_hpet = { + .name = "hpet", + .rating = 250, + .read = read_hpet, + .mask = 0xffffffffffffffff, + .mult = 0, /*to be caluclated*/ + .shift = 10, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; +static struct clocksource *hpet_clocksource; + /* A lock for concurrent access by app and isr hpet activity. */ static DEFINE_SPINLOCK(hpet_lock); /* A lock for concurrent intermodule access to hpet and isr hpet activity. */ @@ -79,7 +106,7 @@ struct hpets { struct hpets *hp_next; struct hpet __iomem *hp_hpet; unsigned long hp_hpet_phys; - struct time_interpolator *hp_interpolator; + struct clocksource *hp_clocksource; unsigned long long hp_tick_freq; unsigned long hp_delta; unsigned int hp_ntimer; @@ -94,13 +121,6 @@ static struct hpets *hpets; #define HPET_PERIODIC 0x0004 #define HPET_SHARED_IRQ 0x0008 -#if BITS_PER_LONG == 64 -#define write_counter(V, MC) writeq(V, MC) -#define read_counter(MC) readq(MC) -#else -#define write_counter(V, MC) writel(V, MC) -#define read_counter(MC) readl(MC) -#endif #ifndef readq static inline unsigned long long readq(void __iomem *addr) @@ -737,27 +757,6 @@ static ctl_table dev_root[] = { static struct ctl_table_header *sysctl_header; -static void hpet_register_interpolator(struct hpets *hpetp) -{ -#ifdef CONFIG_TIME_INTERPOLATION - struct time_interpolator *ti; - - ti = kzalloc(sizeof(*ti), GFP_KERNEL); - if (!ti) - return; - - ti->source = TIME_SOURCE_MMIO64; - ti->shift = 10; - ti->addr = &hpetp->hp_hpet->hpet_mc; - ti->frequency = hpetp->hp_tick_freq; - ti->drift = HPET_DRIFT; - ti->mask = -1; - - hpetp->hp_interpolator = ti; - register_time_interpolator(ti); -#endif -} - /* * Adjustment for when arming the timer with * initial conditions. That is, main counter @@ -909,7 +908,16 @@ int hpet_alloc(struct hpet_data *hdp) } hpetp->hp_delta = hpet_calibrate(hpetp); - hpet_register_interpolator(hpetp); + + if (!hpet_clocksource) { + hpet_mctr = (void __iomem *)&hpetp->hp_hpet->hpet_mc; + CLKSRC_FSYS_MMIO_SET(clocksource_hpet.fsys_mmio, hpet_mctr); + clocksource_hpet.mult = clocksource_hz2mult(hpetp->hp_tick_freq, + clocksource_hpet.shift); + clocksource_register(&clocksource_hpet); + hpetp->hp_clocksource = &clocksource_hpet; + hpet_clocksource = &clocksource_hpet; + } return 0; } @@ -995,7 +1003,7 @@ static int hpet_acpi_add(struct acpi_device *device) static int hpet_acpi_remove(struct acpi_device *device, int type) { - /* XXX need to unregister interpolator, dealloc mem, etc */ + /* XXX need to unregister clocksource, dealloc mem, etc */ return -EINVAL; } diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index bf297b03a4e..16ea3374ddd 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -67,6 +67,12 @@ struct clocksource { unsigned long flags; cycle_t (*vread)(void); void (*resume)(void); +#ifdef CONFIG_IA64 + void *fsys_mmio; /* used by fsyscall asm code */ +#define CLKSRC_FSYS_MMIO_SET(mmio, addr) ((mmio) = (addr)) +#else +#define CLKSRC_FSYS_MMIO_SET(mmio, addr) do { } while (0) +#endif /* timekeeping specific data, ignore */ cycle_t cycle_interval;