From: Matthew Wilcox Date: Sun, 9 Sep 2007 14:56:40 +0000 (-0600) Subject: [SCSI] advansys: Use DRV_NAME X-Git-Tag: v2.6.24-rc1~1290^2~118 X-Git-Url: http://www.pilppa.org/gitweb/gitweb.cgi?a=commitdiff_plain;h=01fbfe0b8359695a3ff7f4b79ab1e0a777f10ae4;p=linux-2.6-omap-h63xx.git [SCSI] advansys: Use DRV_NAME Follow the example of some other drivers by defining DRV_NAME to be "advansys". Prevents spelling mistakes. Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley --- diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c index e5b26a1ea0e..0303fc7dacd 100644 --- a/drivers/scsi/advansys.c +++ b/drivers/scsi/advansys.c @@ -1,3 +1,4 @@ +#define DRV_NAME "advansys" #define ASC_VERSION "3.4" /* AdvanSys Driver Version */ /* @@ -3213,11 +3214,11 @@ advansys_biosparam(struct scsi_device *sdev, struct block_device *bdev, } static struct scsi_host_template advansys_template = { - .proc_name = "advansys", + .proc_name = DRV_NAME, #ifdef CONFIG_PROC_FS .proc_info = advansys_proc_info, #endif - .name = "advansys", + .name = DRV_NAME, .info = advansys_info, .queuecommand = advansys_queuecommand, .eh_bus_reset_handler = advansys_reset, @@ -14634,7 +14635,7 @@ advansys_board_found(int iop, struct device *dev, int bus_type) /* Register DMA channel for ISA bus. */ if (asc_dvc_varp->bus_type & ASC_IS_ISA) { shost->dma_channel = asc_dvc_varp->cfg->isa_dma_channel; - ret = request_dma(shost->dma_channel, "advansys"); + ret = request_dma(shost->dma_channel, DRV_NAME); if (ret) { ASC_PRINT3 ("advansys_board_found: board %d: request_dma() %d failed %d\n", @@ -14650,7 +14651,7 @@ advansys_board_found(int iop, struct device *dev, int bus_type) ASC_DBG1(2, "advansys_board_found: request_irq() %d\n", shost->irq); ret = request_irq(shost->irq, advansys_interrupt, share_irq, - "advansys", shost); + DRV_NAME, shost); if (ret) { if (ret == -EBUSY) { @@ -14754,7 +14755,7 @@ static int __devinit advansys_isa_probe(struct device *dev, unsigned int id) PortAddr iop_base = _asc_def_iop_base[id]; struct Scsi_Host *shost; - if (!request_region(iop_base, ASC_IOADR_GAP, "advansys")) { + if (!request_region(iop_base, ASC_IOADR_GAP, DRV_NAME)) { ASC_DBG1(1, "advansys_isa_match: I/O port 0x%x busy\n", iop_base); return -ENODEV; @@ -14790,7 +14791,7 @@ static struct isa_driver advansys_isa_driver = { .remove = __devexit_p(advansys_isa_remove), .driver = { .owner = THIS_MODULE, - .name = "advansys", + .name = DRV_NAME, }, }; @@ -14799,7 +14800,7 @@ static int __devinit advansys_vlb_probe(struct device *dev, unsigned int id) PortAddr iop_base = _asc_def_iop_base[id]; struct Scsi_Host *shost; - if (!request_region(iop_base, ASC_IOADR_GAP, "advansys")) { + if (!request_region(iop_base, ASC_IOADR_GAP, DRV_NAME)) { ASC_DBG1(1, "advansys_vlb_match: I/O port 0x%x busy\n", iop_base); return -ENODEV; @@ -14867,7 +14868,7 @@ static int __devinit advansys_eisa_probe(struct device *dev) err = -ENODEV; for (i = 0; i < 2; i++, ioport += 0x20) { - if (!request_region(ioport, ASC_IOADR_GAP, "advansys")) { + if (!request_region(ioport, ASC_IOADR_GAP, DRV_NAME)) { printk(KERN_WARNING "Region %x-%x busy\n", ioport, ioport + ASC_IOADR_GAP - 1); continue; @@ -14925,7 +14926,7 @@ static __devexit int advansys_eisa_remove(struct device *dev) static struct eisa_driver advansys_eisa_driver = { .id_table = advansys_eisa_table, .driver = { - .name = "advansys", + .name = DRV_NAME, .probe = advansys_eisa_probe, .remove = __devexit_p(advansys_eisa_remove), } @@ -14972,7 +14973,7 @@ advansys_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) err = pci_enable_device(pdev); if (err) goto fail; - err = pci_request_regions(pdev, "advansys"); + err = pci_request_regions(pdev, DRV_NAME); if (err) goto disable_device; pci_set_master(pdev); @@ -15007,7 +15008,7 @@ static void __devexit advansys_pci_remove(struct pci_dev *pdev) } static struct pci_driver advansys_pci_driver = { - .name = "advansys", + .name = DRV_NAME, .id_table = advansys_pci_tbl, .probe = advansys_pci_probe, .remove = __devexit_p(advansys_pci_remove),