From: James Bottomley Date: Thu, 21 Aug 2008 20:14:14 +0000 (-0500) Subject: [SCSI] fix check of PQ and PDT bits for WLUNs X-Git-Tag: v2.6.27-rc7~55^2 X-Git-Url: http://www.pilppa.org/gitweb/gitweb.cgi?a=commitdiff_plain;h=01b291bd66564b4bd826326af6bd0b6d17e99439;p=linux-2.6-omap-h63xx.git [SCSI] fix check of PQ and PDT bits for WLUNs For IBM z series certain LUNs can no longer be accessed. This is because kernel version 2.6.19 a check was introduced not to create a generic SCSI device for devices that return PQ=1 and PDT=0x1f. For WLUNs (see SAM-3, p. 41ff) generic SCSI devices should be created unconditionally without looking at the PQ bit, so add a check for WLUNs in with this test. Acked-by: Martin Petermann Signed-off-by: James Bottomley --- diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 84b4879cff1..34d0de6cd51 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -1080,7 +1080,8 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget, * PDT=1Fh none (no FDD connected to the requested logical unit) */ if (((result[0] >> 5) == 1 || starget->pdt_1f_for_no_lun) && - (result[0] & 0x1f) == 0x1f) { + (result[0] & 0x1f) == 0x1f && + !scsi_is_wlun(lun)) { SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO "scsi scan: peripheral device type" " of 31, no device added\n")); diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h index 5c40cc537d4..192f8716aa9 100644 --- a/include/scsi/scsi.h +++ b/include/scsi/scsi.h @@ -308,6 +308,20 @@ struct scsi_lun { __u8 scsi_lun[8]; }; +/* + * The Well Known LUNS (SAM-3) in our int representation of a LUN + */ +#define SCSI_W_LUN_BASE 0xc100 +#define SCSI_W_LUN_REPORT_LUNS (SCSI_W_LUN_BASE + 1) +#define SCSI_W_LUN_ACCESS_CONTROL (SCSI_W_LUN_BASE + 2) +#define SCSI_W_LUN_TARGET_LOG_PAGE (SCSI_W_LUN_BASE + 3) + +static inline int scsi_is_wlun(unsigned int lun) +{ + return (lun & 0xff00) == SCSI_W_LUN_BASE; +} + + /* * MESSAGE CODES */