#define net_tx_err(p, arg...) if (netif_msg_tx_err(p)) \
printk(arg)
+#define PHY_MAX_ADDR 32
+#define PHY_ID_ANY 0x1f
+#define MII_REG_ANY 0x1f
+
#ifdef CONFIG_SIS190_NAPI
#define NAPI_SUFFIX "-NAPI"
#else
struct timer_list timer;
u32 msg_enable;
struct mii_if_info mii_if;
+ struct list_head first_phy;
+};
+
+struct sis190_phy {
+ struct list_head list;
+ int phy_id;
+ u16 id[2];
+ u16 status;
+ u8 type;
+};
+
+enum sis190_phy_type {
+ UNKNOWN = 0x00,
+ HOME = 0x01,
+ LAN = 0x02,
+ MIX = 0x03
+};
+
+static struct mii_chip_info {
+ const char *name;
+ u16 id[2];
+ unsigned int type;
+} mii_chip_table[] = {
+ { "Broadcom PHY BCM5461", { 0x0020, 0x60c0 }, LAN },
+ { "Agere PHY ET1101B", { 0x0282, 0xf010 }, LAN },
+ { "Marvell PHY 88E1111", { 0x0141, 0x0cc0 }, LAN },
+ { NULL, }
};
const static struct {
return &tp->stats;
}
+static void sis190_free_phy(struct list_head *first_phy)
+{
+ struct sis190_phy *cur, *next;
+
+ list_for_each_entry_safe(cur, next, first_phy, list) {
+ kfree(cur);
+ }
+}
+
+/**
+ * sis190_default_phy - Select default PHY for sis190 mac.
+ * @dev: the net device to probe for
+ *
+ * Select first detected PHY with link as default.
+ * If no one is link on, select PHY whose types is HOME as default.
+ * If HOME doesn't exist, select LAN.
+ */
+static u16 sis190_default_phy(struct net_device *dev)
+{
+ struct sis190_phy *phy, *phy_home, *phy_default, *phy_lan;
+ struct sis190_private *tp = netdev_priv(dev);
+ struct mii_if_info *mii_if = &tp->mii_if;
+ void __iomem *ioaddr = tp->mmio_addr;
+ u16 status;
+
+ phy_home = phy_default = phy_lan = NULL;
+
+ list_for_each_entry(phy, &tp->first_phy, list) {
+ status = mdio_read_latched(ioaddr, phy->phy_id, MII_BMSR);
+
+ // Link ON & Not select default PHY & not ghost PHY.
+ if ((status & BMSR_LSTATUS) &&
+ !phy_default &&
+ (phy->type != UNKNOWN)) {
+ phy_default = phy;
+ } else {
+ status = mdio_read(ioaddr, phy->phy_id, MII_BMCR);
+ mdio_write(ioaddr, phy->phy_id, MII_BMCR,
+ status | BMCR_ANENABLE | BMCR_ISOLATE);
+ if (phy->type == HOME)
+ phy_home = phy;
+ else if (phy->type == LAN)
+ phy_lan = phy;
+ }
+ }
+
+ if (!phy_default) {
+ if (phy_home)
+ phy_default = phy_home;
+ else if (phy_lan)
+ phy_default = phy_lan;
+ else
+ phy_default = list_entry(&tp->first_phy,
+ struct sis190_phy, list);
+ }
+
+ if (mii_if->phy_id != phy_default->phy_id) {
+ mii_if->phy_id = phy_default->phy_id;
+ net_probe(tp, KERN_INFO
+ "%s: Using transceiver at address %d as default.\n",
+ dev->name, mii_if->phy_id);
+ }
+
+ status = mdio_read(ioaddr, mii_if->phy_id, MII_BMCR);
+ status &= (~BMCR_ISOLATE);
+
+ mdio_write(ioaddr, mii_if->phy_id, MII_BMCR, status);
+ status = mdio_read_latched(ioaddr, mii_if->phy_id, MII_BMSR);
+
+ return status;
+}
+
+static void sis190_init_phy(struct net_device *dev, struct sis190_private *tp,
+ struct sis190_phy *phy, unsigned int phy_id,
+ u16 mii_status)
+{
+ void __iomem *ioaddr = tp->mmio_addr;
+ struct mii_chip_info *p;
+
+ INIT_LIST_HEAD(&phy->list);
+ phy->status = mii_status;
+ phy->phy_id = phy_id;
+
+ phy->id[0] = mdio_read(ioaddr, phy_id, MII_PHYSID1);
+ phy->id[1] = mdio_read(ioaddr, phy_id, MII_PHYSID2);
+
+ for (p = mii_chip_table; p->type; p++) {
+ if ((p->id[0] == phy->id[0]) &&
+ (p->id[1] == (phy->id[1] & 0xfff0))) {
+ break;
+ }
+ }
+
+ if (p->id[1]) {
+ phy->type = (p->type == MIX) ?
+ ((mii_status & (BMSR_100FULL | BMSR_100HALF)) ?
+ LAN : HOME) : p->type;
+ } else
+ phy->type = UNKNOWN;
+
+ net_probe(tp, KERN_INFO "%s: %s transceiver at address %d.\n",
+ dev->name, (phy->type == UNKNOWN) ? "Unknown PHY" : p->name,
+ phy_id);
+}
+
+/**
+ * sis190_mii_probe - Probe MII PHY for sis190
+ * @dev: the net device to probe for
+ *
+ * Search for total of 32 possible mii phy addresses.
+ * Identify and set current phy if found one,
+ * return error if it failed to found.
+ */
+static int __devinit sis190_mii_probe(struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+ struct mii_if_info *mii_if = &tp->mii_if;
+ void __iomem *ioaddr = tp->mmio_addr;
+ int phy_id;
+ int rc = 0;
+
+ INIT_LIST_HEAD(&tp->first_phy);
+
+ for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) {
+ struct sis190_phy *phy;
+ u16 status;
+
+ status = mdio_read_latched(ioaddr, phy_id, MII_BMSR);
+
+ // Try next mii if the current one is not accessible.
+ if (status == 0xffff || status == 0x0000)
+ continue;
+
+ phy = kmalloc(sizeof(*phy), GFP_KERNEL);
+ if (!phy) {
+ sis190_free_phy(&tp->first_phy);
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ sis190_init_phy(dev, tp, phy, phy_id, status);
+
+ list_add(&tp->first_phy, &phy->list);
+ }
+
+ if (list_empty(&tp->first_phy)) {
+ net_probe(tp, KERN_INFO "%s: No MII transceivers found!\n",
+ dev->name);
+ rc = -EIO;
+ goto out;
+ }
+
+ /* Select default PHY for mac */
+ sis190_default_phy(dev);
+
+ mii_if->dev = dev;
+ mii_if->mdio_read = __mdio_read;
+ mii_if->mdio_write = __mdio_write;
+ mii_if->phy_id_mask = PHY_ID_ANY;
+ mii_if->reg_num_mask = MII_REG_ANY;
+out:
+ return rc;
+}
+
+static void __devexit sis190_mii_remove(struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+
+ sis190_free_phy(&tp->first_phy);
+}
+
static void sis190_release_board(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
tp->pci_dev = pdev;
tp->mmio_addr = ioaddr;
- tp->mii_if.dev = dev;
- tp->mii_if.mdio_read = __mdio_read;
- tp->mii_if.mdio_write = __mdio_write;
- tp->mii_if.phy_id = 1;
- tp->mii_if.phy_id_mask = 0x1f;
- tp->mii_if.reg_num_mask = 0x1f;
-
sis190_irq_mask_and_ack(ioaddr);
sis190_soft_reset(ioaddr);
pci_set_drvdata(pdev, dev);
+ rc = sis190_mii_probe(dev);
+ if (rc < 0)
+ goto err_unregister_dev;
+
net_probe(tp, KERN_INFO "%s: %s at %p (IRQ: %d), "
"%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n",
pci_name(pdev), sis_chip_info[ent->driver_data].name,
out:
return rc;
+err_unregister_dev:
+ unregister_netdev(dev);
err_release_board:
sis190_release_board(pdev);
goto out;
{
struct net_device *dev = pci_get_drvdata(pdev);
+ sis190_mii_remove(dev);
unregister_netdev(dev);
sis190_release_board(pdev);
pci_set_drvdata(pdev, NULL);
projects / linux-2.6-omap-h63xx.git / commitdiff