Note that, rcu_assign_pointer() and rcu_dereference() relate to
SRCU just as they do to other forms of RCU.
+
+15. The whole point of call_rcu(), synchronize_rcu(), and friends
+ is to wait until all pre-existing readers have finished before
+ carrying out some otherwise-destructive operation. It is
+ therefore critically important to -first- remove any path
+ that readers can follow that could be affected by the
+ destructive operation, and -only- -then- invoke call_rcu(),
+ synchronize_rcu(), or friends.
+
+ Because these primitives only wait for pre-existing readers,
+ it is the caller's responsibility to guarantee safety to
+ any subsequent readers.
Secmark, it is time to deprecate the older mechanism and start the
process of removing the old code.
Who: Paul Moore <paul.moore@hp.com>
+---------------------------
+
+What: sysfs ui for changing p4-clockmod parameters
+When: September 2009
+Why: See commits 129f8ae9b1b5be94517da76009ea956e89104ce8 and
+ e088e4c9cdb618675874becb91b2fd581ee707e6.
+ Removal is subject to fixing any remaining bugs in ACPI which may
+ cause the thermal throttling not to happen at the right time.
+Who: Dave Jones <davej@redhat.com>, Matthew Garrett <mjg@redhat.com>
Squashfs Cramfs
-Max filesystem size: 2^64 16 MiB
+Max filesystem size: 2^64 256 MiB
Max file size: ~ 2 TiB 16 MiB
Max files: unlimited unlimited
Max directories: unlimited unlimited
--- /dev/null
+
+Options for the ipv6 module are supplied as parameters at load time.
+
+Module options may be given as command line arguments to the insmod
+or modprobe command, but are usually specified in either the
+/etc/modules.conf or /etc/modprobe.conf configuration file, or in a
+distro-specific configuration file.
+
+The available ipv6 module parameters are listed below. If a parameter
+is not specified the default value is used.
+
+The parameters are as follows:
+
+disable
+
+ Specifies whether to load the IPv6 module, but disable all
+ its functionality. This might be used when another module
+ has a dependency on the IPv6 module being loaded, but no
+ IPv6 addresses or operations are desired.
+
+ The possible values and their effects are:
+
+ 0
+ IPv6 is enabled.
+
+ This is the default value.
+
+ 1
+ IPv6 is disabled.
+
+ No IPv6 addresses will be added to interfaces, and
+ it will not be possible to open an IPv6 socket.
+
+ A reboot is required to enable IPv6.
+
============
The Chelsio T3 ASIC based Adapters (S310, S320, S302, S304, Mezz cards, etc.
-series of products) supports iSCSI acceleration and iSCSI Direct Data Placement
+series of products) support iSCSI acceleration and iSCSI Direct Data Placement
(DDP) where the hardware handles the expensive byte touching operations, such
as CRC computation and verification, and direct DMA to the final host memory
destination:
the TCP segments onto the wire. It handles TCP retransmission if
needed.
- On receving, S3 h/w recovers the iSCSI PDU by reassembling TCP
+ On receiving, S3 h/w recovers the iSCSI PDU by reassembling TCP
segments, separating the header and data, calculating and verifying
- the digests, then forwards the header to the host. The payload data,
+ the digests, then forwarding the header to the host. The payload data,
if possible, will be directly placed into the pre-posted host DDP
buffer. Otherwise, the payload data will be sent to the host too.
sure the ip address is unique in the network.
3. edit /etc/iscsi/iscsid.conf
- The default setting for MaxRecvDataSegmentLength (131072) is too big,
- replace "node.conn[0].iscsi.MaxRecvDataSegmentLength" to be a value no
- bigger than 15360 (for example 8192):
+ The default setting for MaxRecvDataSegmentLength (131072) is too big;
+ replace with a value no bigger than 15360 (for example 8192):
node.conn[0].iscsi.MaxRecvDataSegmentLength = 8192
ISDN SUBSYSTEM
P: Karsten Keil
-M: kkeil@suse.de
+M: isdn@linux-pingi.de
L: isdn4linux@listserv.isdn4linux.de (subscribers-only)
W: http://www.isdn4linux.de
T: git kernel.org:/pub/scm/linux/kernel/kkeil/isdn-2.6.git
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 29
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
NAME = Erotic Pickled Herring
# *DOCUMENTATION*
unsigned int cachetype = read_cpuid_cachetype();
unsigned int arch = cpu_architecture();
- if (arch >= CPU_ARCH_ARMv7) {
- cacheid = CACHEID_VIPT_NONALIASING;
- if ((cachetype & (3 << 14)) == 1 << 14)
- cacheid |= CACHEID_ASID_TAGGED;
- } else if (arch >= CPU_ARCH_ARMv6) {
- if (cachetype & (1 << 23))
+ if (arch >= CPU_ARCH_ARMv6) {
+ if ((cachetype & (7 << 29)) == 4 << 29) {
+ /* ARMv7 register format */
+ cacheid = CACHEID_VIPT_NONALIASING;
+ if ((cachetype & (3 << 14)) == 1 << 14)
+ cacheid |= CACHEID_ASID_TAGGED;
+ } else if (cachetype & (1 << 23))
cacheid = CACHEID_VIPT_ALIASING;
else
cacheid = CACHEID_VIPT_NONALIASING;
void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
#endif
+/* --------------------------------------------------------------------
+ * Compact Flash (PCMCIA or IDE)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) || \
+ defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
+
+static struct at91_cf_data cf0_data;
+
+static struct resource cf0_resources[] = {
+ [0] = {
+ .start = AT91_CHIPSELECT_4,
+ .end = AT91_CHIPSELECT_4 + SZ_256M - 1,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
+ }
+};
+
+static struct platform_device cf0_device = {
+ .id = 0,
+ .dev = {
+ .platform_data = &cf0_data,
+ },
+ .resource = cf0_resources,
+ .num_resources = ARRAY_SIZE(cf0_resources),
+};
+
+static struct at91_cf_data cf1_data;
+
+static struct resource cf1_resources[] = {
+ [0] = {
+ .start = AT91_CHIPSELECT_5,
+ .end = AT91_CHIPSELECT_5 + SZ_256M - 1,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
+ }
+};
+
+static struct platform_device cf1_device = {
+ .id = 1,
+ .dev = {
+ .platform_data = &cf1_data,
+ },
+ .resource = cf1_resources,
+ .num_resources = ARRAY_SIZE(cf1_resources),
+};
+
+void __init at91_add_device_cf(struct at91_cf_data *data)
+{
+ unsigned long ebi0_csa;
+ struct platform_device *pdev;
+
+ if (!data)
+ return;
+
+ /*
+ * assign CS4 or CS5 to SMC with Compact Flash logic support,
+ * we assume SMC timings are configured by board code,
+ * except True IDE where timings are controlled by driver
+ */
+ ebi0_csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
+ switch (data->chipselect) {
+ case 4:
+ at91_set_A_periph(AT91_PIN_PD6, 0); /* EBI0_NCS4/CFCS0 */
+ ebi0_csa |= AT91_MATRIX_EBI0_CS4A_SMC_CF1;
+ cf0_data = *data;
+ pdev = &cf0_device;
+ break;
+ case 5:
+ at91_set_A_periph(AT91_PIN_PD7, 0); /* EBI0_NCS5/CFCS1 */
+ ebi0_csa |= AT91_MATRIX_EBI0_CS5A_SMC_CF2;
+ cf1_data = *data;
+ pdev = &cf1_device;
+ break;
+ default:
+ printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n",
+ data->chipselect);
+ return;
+ }
+ at91_sys_write(AT91_MATRIX_EBI0CSA, ebi0_csa);
+
+ if (data->det_pin) {
+ at91_set_gpio_input(data->det_pin, 1);
+ at91_set_deglitch(data->det_pin, 1);
+ }
+
+ if (data->irq_pin) {
+ at91_set_gpio_input(data->irq_pin, 1);
+ at91_set_deglitch(data->irq_pin, 1);
+ }
+
+ if (data->vcc_pin)
+ /* initially off */
+ at91_set_gpio_output(data->vcc_pin, 0);
+
+ /* enable EBI controlled pins */
+ at91_set_A_periph(AT91_PIN_PD5, 1); /* NWAIT */
+ at91_set_A_periph(AT91_PIN_PD8, 0); /* CFCE1 */
+ at91_set_A_periph(AT91_PIN_PD9, 0); /* CFCE2 */
+ at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */
+
+ pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "at91_ide" : "at91_cf";
+ platform_device_register(pdev);
+}
+#else
+void __init at91_add_device_cf(struct at91_cf_data *data) {}
+#endif
/* --------------------------------------------------------------------
* NAND / SmartMedia
u8 vcc_pin; /* power switching */
u8 rst_pin; /* card reset */
u8 chipselect; /* EBI Chip Select number */
+ u8 flags;
+#define AT91_CF_TRUE_IDE 0x01
+#define AT91_IDE_SWAP_A0_A2 0x02
};
extern void __init at91_add_device_cf(struct at91_cf_data *data);
at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR));
error:
- sdram_selfrefresh_disable();
target_state = PM_SUSPEND_ON;
at91_irq_resume();
at91_gpio_resume();
}
ldp_smc911x_resources[0].start = cs_mem_base + 0x0;
- ldp_smc911x_resources[0].end = cs_mem_base + 0xf;
+ ldp_smc911x_resources[0].end = cs_mem_base + 0xff;
udelay(100);
eth_gpio = LDP_SMC911X_GPIO;
#ifdef CONFIG_CPU_32v6K
clrex
#else
- strex r0, r1, [sp] @ Clear the exclusive monitor
+ sub r1, sp, #4 @ Get unused stack location
+ strex r0, r1, [r1] @ Clear the exclusive monitor
#endif
mrc p15, 0, r1, c5, c0, 0 @ get FSR
mrc p15, 0, r0, c6, c0, 0 @ get FAR
u32 mask;
mask = __raw_readl(S3C64XX_EINT0MASK);
- mask |= eint_irq_to_bit(irq);
+ mask &= ~eint_irq_to_bit(irq);
__raw_writel(mask, S3C64XX_EINT0MASK);
}
config PM_WAKEUP_BY_GPIO
bool "Allow Wakeup from Standby by GPIO"
+ depends on PM && !BF54x
config PM_WAKEUP_GPIO_NUMBER
int "GPIO number"
default n
help
Enable General-Purpose Wake-Up (Voltage Regulator Power-Up)
+ (all processors, except ADSP-BF549). This option sets
+ the general-purpose wake-up enable (GPWE) control bit to enable
+ wake-up upon detection of an active low signal on the /GPW (PH7) pin.
+ On ADSP-BF549 this option enables the the same functionality on the
+ /MRXON pin also PH7.
+
endmenu
menu "CPU Frequency scaling"
config HAVE_ARCH_KGDB
def_bool y
-config KGDB_TESTCASE
- tristate "KGDB: for test case in expect"
- default n
- help
- This is a kgdb test case for automated testing.
-
config DEBUG_VERBOSE
bool "Verbose fault messages"
default y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Fri Jan 9 17:58:41 2009
+# Linux kernel version: 2.6.28
+# Fri Feb 20 10:01:44 2009
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
# CONFIG_BF538 is not set
# CONFIG_BF539 is not set
# CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
# CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
# CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
# CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
# CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
# CONFIG_BF561 is not set
CONFIG_BF_REV_MIN=0
CONFIG_BF_REV_MAX=2
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
+CONFIG_NET_DSA=y
+# CONFIG_NET_DSA_TAG_DSA is not set
+# CONFIG_NET_DSA_TAG_EDSA is not set
+# CONFIG_NET_DSA_TAG_TRAILER is not set
+CONFIG_NET_DSA_TAG_STPID=y
+# CONFIG_NET_DSA_MV88E6XXX is not set
+# CONFIG_NET_DSA_MV88E6060 is not set
+# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
+# CONFIG_NET_DSA_MV88E6131 is not set
+# CONFIG_NET_DSA_MV88E6123_61_65 is not set
+CONFIG_NET_DSA_KSZ8893M=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
#
# Self-contained MTD device drivers
#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SMC91X is not set
# CONFIG_SMSC911X is not set
# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_KGDB_TESTCASE is not set
CONFIG_DEBUG_VERBOSE=y
CONFIG_DEBUG_MMRS=y
# CONFIG_DEBUG_HWERR is not set
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
# CONFIG_MPU is not set
#
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
# CONFIG_MPU is not set
#
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
# CONFIG_MPU is not set
#
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
# CONFIG_MPU is not set
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_BFIN is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-CONFIG_MTD_NAND_PLATFORM=m
+# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
#
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
# CONFIG_MPU is not set
#
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
# CONFIG_BFIN_L2_CACHEABLE is not set
# CONFIG_MPU is not set
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
# CONFIG_BFIN_L2_CACHEABLE is not set
# CONFIG_MPU is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
# CONFIG_MPU is not set
#
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
# CONFIG_MPU is not set
#
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
CONFIG_L1_MAX_PIECE=16
# CONFIG_MPU is not set
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
CONFIG_SCSI=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
CONFIG_L1_MAX_PIECE=16
#
include include/asm-generic/Kbuild.asm
+unifdef-y += bfin_sport.h
unifdef-y += fixed_code.h
/*
- * File: include/asm-blackfin/bfin_sport.h
- * Based on:
- * Author: Roy Huang (roy.huang@analog.com)
+ * bfin_sport.h - userspace header for bfin sport driver
*
- * Created: Thu Aug. 24 2006
- * Description:
+ * Copyright 2004-2008 Analog Devices Inc.
*
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#ifndef __BFIN_SPORT_H__
#define NORM_FORMAT 0x0
#define ALAW_FORMAT 0x2
#define ULAW_FORMAT 0x3
-struct sport_register;
/* Function driver which use sport must initialize the structure */
struct sport_config {
- /*TDM (multichannels), I2S or other mode */
+ /* TDM (multichannels), I2S or other mode */
unsigned int mode:3;
/* if TDM mode is selected, channels must be set */
int serial_clk;
int fsync_clk;
- unsigned int data_format:2; /*Normal, u-law or a-law */
+ unsigned int data_format:2; /* Normal, u-law or a-law */
int word_len; /* How length of the word in bits, 3-32 bits */
int dma_enabled;
};
+/* Userspace interface */
+#define SPORT_IOC_MAGIC 'P'
+#define SPORT_IOC_CONFIG _IOWR('P', 0x01, struct sport_config)
+
+#ifdef __KERNEL__
+
struct sport_register {
unsigned short tcr1;
unsigned short reserved0;
unsigned long mrcs3;
};
-#define SPORT_IOC_MAGIC 'P'
-#define SPORT_IOC_CONFIG _IOWR('P', 0x01, struct sport_config)
-
struct sport_dev {
struct cdev cdev; /* Char device structure */
struct sport_config config;
};
+#endif
+
#define SPORT_TCR1 0
#define SPORT_TCR2 1
#define SPORT_TCLKDIV 2
#define SPORT_MRCS2 22
#define SPORT_MRCS3 23
-#endif /*__BFIN_SPORT_H__*/
+#endif
#include <asm/atomic.h>
#include <asm/traps.h>
-#define IPIPE_ARCH_STRING "1.8-00"
+#define IPIPE_ARCH_STRING "1.9-00"
#define IPIPE_MAJOR_NUMBER 1
-#define IPIPE_MINOR_NUMBER 8
+#define IPIPE_MINOR_NUMBER 9
#define IPIPE_PATCH_NUMBER 0
#ifdef CONFIG_SMP
"%2 = CYCLES2\n" \
"CC = %2 == %0\n" \
"if ! CC jump 1b\n" \
- : "=r" (((unsigned long *)&t)[1]), \
- "=r" (((unsigned long *)&t)[0]), \
- "=r" (__cy2) \
+ : "=d,a" (((unsigned long *)&t)[1]), \
+ "=d,a" (((unsigned long *)&t)[0]), \
+ "=d,a" (__cy2) \
: /*no input*/ : "CC"); \
t; \
})
#define __ipipe_disable_irq(irq) (irq_desc[irq].chip->mask(irq))
-#define __ipipe_lock_root() \
- set_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)
+static inline int __ipipe_check_tickdev(const char *devname)
+{
+ return 1;
+}
-#define __ipipe_unlock_root() \
- clear_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)
+static inline void __ipipe_lock_root(void)
+{
+ set_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status));
+}
+
+static inline void __ipipe_unlock_root(void)
+{
+ clear_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status));
+}
void __ipipe_enable_pipeline(void);
#define __ipipe_hook_critical_ipi(ipd) do { } while (0)
-#define __ipipe_sync_pipeline(syncmask) \
- do { \
- struct ipipe_domain *ipd = ipipe_current_domain; \
- if (likely(ipd != ipipe_root_domain || !test_bit(IPIPE_ROOTLOCK_FLAG, &ipd->flags))) \
- __ipipe_sync_stage(syncmask); \
- } while (0)
+#define __ipipe_sync_pipeline ___ipipe_sync_pipeline
+void ___ipipe_sync_pipeline(unsigned long syncmask);
void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs);
int __ipipe_get_irq_priority(unsigned irq);
-int __ipipe_get_irqthread_priority(unsigned irq);
-
void __ipipe_stall_root_raw(void);
void __ipipe_unstall_root_raw(void);
void __ipipe_serial_debug(const char *fmt, ...);
+asmlinkage void __ipipe_call_irqtail(unsigned long addr);
+
DECLARE_PER_CPU(struct pt_regs, __ipipe_tick_regs);
extern unsigned long __ipipe_core_clock;
#define __ipipe_run_irqtail() /* Must be a macro */ \
do { \
- asmlinkage void __ipipe_call_irqtail(void); \
unsigned long __pending; \
- CSYNC(); \
+ CSYNC(); \
__pending = bfin_read_IPEND(); \
if (__pending & 0x8000) { \
__pending &= ~0x8010; \
if (__pending && (__pending & (__pending - 1)) == 0) \
- __ipipe_call_irqtail(); \
+ __ipipe_call_irqtail(__ipipe_irq_tail_hook); \
} \
} while (0)
#define __ipipe_run_isr(ipd, irq) \
do { \
if (ipd == ipipe_root_domain) { \
- /* \
- * Note: the I-pipe implements a threaded interrupt model on \
- * this arch for Linux external IRQs. The interrupt handler we \
- * call here only wakes up the associated IRQ thread. \
- */ \
- if (ipipe_virtual_irq_p(irq)) { \
- /* No irqtail here; virtual interrupts have no effect \
- on IPEND so there is no need for processing \
- deferral. */ \
- local_irq_enable_nohead(ipd); \
+ local_irq_enable_hw(); \
+ if (ipipe_virtual_irq_p(irq)) \
ipd->irqs[irq].handler(irq, ipd->irqs[irq].cookie); \
- local_irq_disable_nohead(ipd); \
- } else \
- /* \
- * No need to run the irqtail here either; \
- * we can't be preempted by hw IRQs, so \
- * non-Linux IRQs cannot stack over the short \
- * thread wakeup code. Which in turn means \
- * that no irqtail condition could be pending \
- * for domains above Linux in the pipeline. \
- */ \
+ else \
ipd->irqs[irq].handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs)); \
+ local_irq_disable_hw(); \
} else { \
__clear_bit(IPIPE_SYNC_FLAG, &ipipe_cpudom_var(ipd, status)); \
local_irq_enable_nohead(ipd); \
int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc);
-#define IS_SYSIRQ(irq) ((irq) > IRQ_CORETMR && (irq) <= SYS_IRQS)
-#define IS_GPIOIRQ(irq) ((irq) >= GPIO_IRQ_BASE && (irq) < NR_IRQS)
-
+#ifdef CONFIG_GENERIC_CLOCKEVENTS
+#define IRQ_SYSTMR IRQ_CORETMR
+#define IRQ_PRIOTMR IRQ_CORETMR
+#else
#define IRQ_SYSTMR IRQ_TIMER0
#define IRQ_PRIOTMR CONFIG_IRQ_TIMER0
+#endif
-#if defined(CONFIG_BF531) || defined(CONFIG_BF532) || defined(CONFIG_BF533)
-#define PRIO_GPIODEMUX(irq) CONFIG_PFA
-#elif defined(CONFIG_BF534) || defined(CONFIG_BF536) || defined(CONFIG_BF537)
-#define PRIO_GPIODEMUX(irq) CONFIG_IRQ_PROG_INTA
-#elif defined(CONFIG_BF52x)
-#define PRIO_GPIODEMUX(irq) ((irq) == IRQ_PORTF_INTA ? CONFIG_IRQ_PORTF_INTA : \
- (irq) == IRQ_PORTG_INTA ? CONFIG_IRQ_PORTG_INTA : \
- (irq) == IRQ_PORTH_INTA ? CONFIG_IRQ_PORTH_INTA : \
- -1)
-#elif defined(CONFIG_BF561)
-#define PRIO_GPIODEMUX(irq) ((irq) == IRQ_PROG0_INTA ? CONFIG_IRQ_PROG0_INTA : \
- (irq) == IRQ_PROG1_INTA ? CONFIG_IRQ_PROG1_INTA : \
- (irq) == IRQ_PROG2_INTA ? CONFIG_IRQ_PROG2_INTA : \
- -1)
+#ifdef CONFIG_BF561
#define bfin_write_TIMER_DISABLE(val) bfin_write_TMRS8_DISABLE(val)
#define bfin_write_TIMER_ENABLE(val) bfin_write_TMRS8_ENABLE(val)
#define bfin_write_TIMER_STATUS(val) bfin_write_TMRS8_STATUS(val)
#define bfin_read_TIMER_STATUS() bfin_read_TMRS8_STATUS()
#elif defined(CONFIG_BF54x)
-#define PRIO_GPIODEMUX(irq) ((irq) == IRQ_PINT0 ? CONFIG_IRQ_PINT0 : \
- (irq) == IRQ_PINT1 ? CONFIG_IRQ_PINT1 : \
- (irq) == IRQ_PINT2 ? CONFIG_IRQ_PINT2 : \
- (irq) == IRQ_PINT3 ? CONFIG_IRQ_PINT3 : \
- -1)
#define bfin_write_TIMER_DISABLE(val) bfin_write_TIMER_DISABLE0(val)
#define bfin_write_TIMER_ENABLE(val) bfin_write_TIMER_ENABLE0(val)
#define bfin_write_TIMER_STATUS(val) bfin_write_TIMER_STATUS0(val)
#define bfin_read_TIMER_STATUS(val) bfin_read_TIMER_STATUS0(val)
-#else
-# error "no PRIO_GPIODEMUX() for this part"
#endif
#define __ipipe_root_tick_p(regs) ((regs->ipend & 0x10) != 0)
#endif /* !CONFIG_IPIPE */
+#define ipipe_update_tick_evtdev(evtdev) do { } while (0)
+
#endif /* !__ASM_BLACKFIN_IPIPE_H */
/* -*- linux-c -*-
- * include/asm-blackfin/_baseipipe.h
+ * include/asm-blackfin/ipipe_base.h
*
* Copyright (C) 2007 Philippe Gerum.
*
#define IPIPE_NR_XIRQS NR_IRQS
#define IPIPE_IRQ_ISHIFT 5 /* 2^5 for 32bits arch. */
-/* Blackfin-specific, global domain flags */
-#define IPIPE_ROOTLOCK_FLAG 1 /* Lock pipeline for root */
+/* Blackfin-specific, per-cpu pipeline status */
+#define IPIPE_SYNCDEFER_FLAG 15
+#define IPIPE_SYNCDEFER_MASK (1L << IPIPE_SYNCDEFER_MASK)
/* Blackfin traps -- i.e. exception vector numbers */
#define IPIPE_NR_FAULTS 52 /* We leave a gap after VEC_ILL_RES. */
#ifndef __ASSEMBLY__
-#include <linux/bitops.h>
-
-extern int test_bit(int nr, const void *addr);
-
-
extern unsigned long __ipipe_root_status; /* Alias to ipipe_root_cpudom_var(status) */
static inline void __ipipe_stall_root(void)
#define raw_irqs_disabled_flags(flags) (!irqs_enabled_from_flags_hw(flags))
#define local_test_iflag_hw(x) irqs_enabled_from_flags_hw(x)
-#define local_save_flags(x) \
- do { \
- (x) = __ipipe_test_root() ? \
+#define local_save_flags(x) \
+ do { \
+ (x) = __ipipe_test_root() ? \
__all_masked_irq_flags : bfin_irq_flags; \
+ barrier(); \
} while (0)
-#define local_irq_save(x) \
- do { \
- (x) = __ipipe_test_and_stall_root(); \
+#define local_irq_save(x) \
+ do { \
+ (x) = __ipipe_test_and_stall_root() ? \
+ __all_masked_irq_flags : bfin_irq_flags; \
+ barrier(); \
+ } while (0)
+
+static inline void local_irq_restore(unsigned long x)
+{
+ barrier();
+ __ipipe_restore_root(x == __all_masked_irq_flags);
+}
+
+#define local_irq_disable() \
+ do { \
+ __ipipe_stall_root(); \
+ barrier(); \
} while (0)
-#define local_irq_restore(x) __ipipe_restore_root(x)
-#define local_irq_disable() __ipipe_stall_root()
-#define local_irq_enable() __ipipe_unstall_root()
+static inline void local_irq_enable(void)
+{
+ barrier();
+ __ipipe_unstall_root();
+}
+
#define irqs_disabled() __ipipe_test_root()
#define local_save_flags_hw(x) \
#define TIF_MEMDIE 4
#define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */
#define TIF_FREEZE 6 /* is freezing for suspend */
+#define TIF_IRQ_SYNC 7 /* sync pipeline stage */
/* as above, but as bit values */
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
#define _TIF_FREEZE (1<<TIF_FREEZE)
+#define _TIF_IRQ_SYNC (1<<TIF_IRQ_SYNC)
#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */
obj-y += time.o
endif
-CFLAGS_kgdb_test.o := -mlong-calls -O0
-
obj-$(CONFIG_IPIPE) += ipipe.o
obj-$(CONFIG_IPIPE_TRACE_MCOUNT) += mcount.o
obj-$(CONFIG_BFIN_GPTIMERS) += gptimers.o
obj-$(CONFIG_CPLB_INFO) += cplbinfo.o
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_KGDB) += kgdb.o
-obj-$(CONFIG_KGDB_TESTCASE) += kgdb_test.o
+obj-$(CONFIG_KGDB_TESTS) += kgdb_test.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+
+# the kgdb test puts code into L2 and without linker
+# relaxation, we need to force long calls to/from it
+CFLAGS_kgdb_test.o := -mlong-calls -O0
i_d = i_i = 0;
+#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
/* Set up the zero page. */
d_tbl[i_d].addr = 0;
d_tbl[i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
+ i_tbl[i_i].addr = 0;
+ i_tbl[i_i++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
+#endif
/* Cover kernel memory with 4M pages. */
addr = 0;
#include <asm/atomic.h>
#include <asm/io.h>
-static int create_irq_threads;
-
DEFINE_PER_CPU(struct pt_regs, __ipipe_tick_regs);
-static DEFINE_PER_CPU(unsigned long, pending_irqthread_mask);
-
-static DEFINE_PER_CPU(int [IVG13 + 1], pending_irq_count);
-
asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs);
static void __ipipe_no_irqtail(void);
*/
void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
{
+ struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr();
struct ipipe_domain *this_domain, *next_domain;
struct list_head *head, *pos;
int m_ack, s = -1;
* interrupt.
*/
m_ack = (regs == NULL || irq == IRQ_SYSTMR || irq == IRQ_CORETMR);
-
this_domain = ipipe_current_domain;
if (unlikely(test_bit(IPIPE_STICKY_FLAG, &this_domain->irqs[irq].control)))
next_domain = list_entry(head, struct ipipe_domain, p_link);
if (likely(test_bit(IPIPE_WIRED_FLAG, &next_domain->irqs[irq].control))) {
if (!m_ack && next_domain->irqs[irq].acknowledge != NULL)
- next_domain->irqs[irq].acknowledge(irq, irq_desc + irq);
- if (test_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags))
- s = __test_and_set_bit(IPIPE_STALL_FLAG,
- &ipipe_root_cpudom_var(status));
+ next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq));
+ if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status))
+ s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status);
__ipipe_dispatch_wired(next_domain, irq);
- goto finalize;
- return;
+ goto out;
}
}
/* Ack the interrupt. */
pos = head;
-
while (pos != &__ipipe_pipeline) {
next_domain = list_entry(pos, struct ipipe_domain, p_link);
- /*
- * For each domain handling the incoming IRQ, mark it
- * as pending in its log.
- */
if (test_bit(IPIPE_HANDLE_FLAG, &next_domain->irqs[irq].control)) {
- /*
- * Domains that handle this IRQ are polled for
- * acknowledging it by decreasing priority
- * order. The interrupt must be made pending
- * _first_ in the domain's status flags before
- * the PIC is unlocked.
- */
__ipipe_set_irq_pending(next_domain, irq);
-
if (!m_ack && next_domain->irqs[irq].acknowledge != NULL) {
- next_domain->irqs[irq].acknowledge(irq, irq_desc + irq);
+ next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq));
m_ack = 1;
}
}
-
- /*
- * If the domain does not want the IRQ to be passed
- * down the interrupt pipe, exit the loop now.
- */
if (!test_bit(IPIPE_PASS_FLAG, &next_domain->irqs[irq].control))
break;
-
pos = next_domain->p_link.next;
}
* immediately to the current domain if the interrupt has been
* marked as 'sticky'. This search does not go beyond the
* current domain in the pipeline. We also enforce the
- * additional root stage lock (blackfin-specific). */
+ * additional root stage lock (blackfin-specific).
+ */
+ if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status))
+ s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status);
- if (test_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags))
- s = __test_and_set_bit(IPIPE_STALL_FLAG,
- &ipipe_root_cpudom_var(status));
-finalize:
+ /*
+ * If the interrupt preempted the head domain, then do not
+ * even try to walk the pipeline, unless an interrupt is
+ * pending for it.
+ */
+ if (test_bit(IPIPE_AHEAD_FLAG, &this_domain->flags) &&
+ ipipe_head_cpudom_var(irqpend_himask) == 0)
+ goto out;
__ipipe_walk_pipeline(head);
-
+out:
if (!s)
- __clear_bit(IPIPE_STALL_FLAG,
- &ipipe_root_cpudom_var(status));
+ __clear_bit(IPIPE_STALL_FLAG, &p->status);
}
int __ipipe_check_root(void)
void __ipipe_enable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
{
- struct irq_desc *desc = irq_desc + irq;
+ struct irq_desc *desc = irq_to_desc(irq);
int prio = desc->ic_prio;
desc->depth = 0;
void __ipipe_disable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
{
- struct irq_desc *desc = irq_desc + irq;
+ struct irq_desc *desc = irq_to_desc(irq);
int prio = desc->ic_prio;
if (ipd != &ipipe_root &&
{
unsigned long flags;
- /* We need to run the IRQ tail hook whenever we don't
+ /*
+ * We need to run the IRQ tail hook whenever we don't
* propagate a syscall to higher domains, because we know that
* important operations might be pending there (e.g. Xenomai
- * deferred rescheduling). */
+ * deferred rescheduling).
+ */
- if (!__ipipe_syscall_watched_p(current, regs->orig_p0)) {
+ if (regs->orig_p0 < NR_syscalls) {
void (*hook)(void) = (void (*)(void))__ipipe_irq_tail_hook;
hook();
- return 0;
+ if ((current->flags & PF_EVNOTIFY) == 0)
+ return 0;
}
/*
{
unsigned long flags;
+#ifdef CONFIG_IPIPE_DEBUG
if (irq >= IPIPE_NR_IRQS ||
(ipipe_virtual_irq_p(irq)
&& !test_bit(irq - IPIPE_VIRQ_BASE, &__ipipe_virtual_irq_map)))
return -EINVAL;
+#endif
local_irq_save_hw(flags);
-
__ipipe_handle_irq(irq, NULL);
-
local_irq_restore_hw(flags);
return 1;
}
-/* Move Linux IRQ to threads. */
-
-static int do_irqd(void *__desc)
+asmlinkage void __ipipe_sync_root(void)
{
- struct irq_desc *desc = __desc;
- unsigned irq = desc - irq_desc;
- int thrprio = desc->thr_prio;
- int thrmask = 1 << thrprio;
- int cpu = smp_processor_id();
- cpumask_t cpumask;
-
- sigfillset(¤t->blocked);
- current->flags |= PF_NOFREEZE;
- cpumask = cpumask_of_cpu(cpu);
- set_cpus_allowed(current, cpumask);
- ipipe_setscheduler_root(current, SCHED_FIFO, 50 + thrprio);
-
- while (!kthread_should_stop()) {
- local_irq_disable();
- if (!(desc->status & IRQ_SCHEDULED)) {
- set_current_state(TASK_INTERRUPTIBLE);
-resched:
- local_irq_enable();
- schedule();
- local_irq_disable();
- }
- __set_current_state(TASK_RUNNING);
- /*
- * If higher priority interrupt servers are ready to
- * run, reschedule immediately. We need this for the
- * GPIO demux IRQ handler to unmask the interrupt line
- * _last_, after all GPIO IRQs have run.
- */
- if (per_cpu(pending_irqthread_mask, cpu) & ~(thrmask|(thrmask-1)))
- goto resched;
- if (--per_cpu(pending_irq_count[thrprio], cpu) == 0)
- per_cpu(pending_irqthread_mask, cpu) &= ~thrmask;
- desc->status &= ~IRQ_SCHEDULED;
- desc->thr_handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs));
- local_irq_enable();
- }
- __set_current_state(TASK_RUNNING);
- return 0;
-}
+ unsigned long flags;
-static void kick_irqd(unsigned irq, void *cookie)
-{
- struct irq_desc *desc = irq_desc + irq;
- int thrprio = desc->thr_prio;
- int thrmask = 1 << thrprio;
- int cpu = smp_processor_id();
-
- if (!(desc->status & IRQ_SCHEDULED)) {
- desc->status |= IRQ_SCHEDULED;
- per_cpu(pending_irqthread_mask, cpu) |= thrmask;
- ++per_cpu(pending_irq_count[thrprio], cpu);
- wake_up_process(desc->thread);
- }
-}
+ BUG_ON(irqs_disabled());
-int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc)
-{
- if (desc->thread || !create_irq_threads)
- return 0;
-
- desc->thread = kthread_create(do_irqd, desc, "IRQ %d", irq);
- if (desc->thread == NULL) {
- printk(KERN_ERR "irqd: could not create IRQ thread %d!\n", irq);
- return -ENOMEM;
- }
+ local_irq_save_hw(flags);
- wake_up_process(desc->thread);
+ clear_thread_flag(TIF_IRQ_SYNC);
- desc->thr_handler = ipipe_root_domain->irqs[irq].handler;
- ipipe_root_domain->irqs[irq].handler = &kick_irqd;
+ if (ipipe_root_cpudom_var(irqpend_himask) != 0)
+ __ipipe_sync_pipeline(IPIPE_IRQMASK_ANY);
- return 0;
+ local_irq_restore_hw(flags);
}
-void __init ipipe_init_irq_threads(void)
+void ___ipipe_sync_pipeline(unsigned long syncmask)
{
- unsigned irq;
- struct irq_desc *desc;
-
- create_irq_threads = 1;
+ struct ipipe_domain *ipd = ipipe_current_domain;
- for (irq = 0; irq < NR_IRQS; irq++) {
- desc = irq_desc + irq;
- if (desc->action != NULL ||
- (desc->status & IRQ_NOREQUEST) != 0)
- ipipe_start_irq_thread(irq, desc);
+ if (ipd == ipipe_root_domain) {
+ if (test_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status)))
+ return;
}
+
+ __ipipe_sync_stage(syncmask);
}
EXPORT_SYMBOL(show_stack);
#endif
generic_handle_irq(irq);
-#ifndef CONFIG_IPIPE /* Useless and bugous over the I-pipe: IRQs are threaded. */
- /* If we're the only interrupt running (ignoring IRQ15 which is for
- syscalls), lower our priority to IRQ14 so that softirqs run at
- that level. If there's another, lower-level interrupt, irq_exit
- will defer softirqs to that. */
+#ifndef CONFIG_IPIPE
+ /*
+ * If we're the only interrupt running (ignoring IRQ15 which
+ * is for syscalls), lower our priority to IRQ14 so that
+ * softirqs run at that level. If there's another,
+ * lower-level interrupt, irq_exit will defer softirqs to
+ * that. If the interrupt pipeline is enabled, we are already
+ * running at IRQ14 priority, so we don't need this code.
+ */
CSYNC();
pending = bfin_read_IPEND() & ~0x8000;
other_ints = pending & (pending - 1);
static char cmdline[256];
static unsigned long len;
+#ifndef CONFIG_SMP
static int num1 __attribute__((l1_data));
void kgdb_l1_test(void) __attribute__((l1_text));
printk(KERN_ALERT "L1(after change) : data variable addr = 0x%p, data value is %d\n", &num1, num1);
return ;
}
+#endif
+
#if L2_LENGTH
static int num2 __attribute__((l2));
static int test_proc_output(char *buf)
{
kgdb_test("hello world!", 12, 0x55, 0x10);
+#ifndef CONFIG_SMP
kgdb_l1_test();
- #if L2_LENGTH
+#endif
+#if L2_LENGTH
kgdb_l2_test();
- #endif
+#endif
return 0;
}
#include <asm/asm-offsets.h>
#include <asm/dma.h>
#include <asm/fixed_code.h>
+#include <asm/cacheflush.h>
#include <asm/mem_map.h>
#define TEXT_OFFSET 0
} else if (addr >= FIXED_CODE_START
&& addr + sizeof(tmp) <= FIXED_CODE_END) {
- memcpy(&tmp, (const void *)(addr), sizeof(tmp));
+ copy_from_user_page(0, 0, 0, &tmp, (const void *)(addr), sizeof(tmp));
copied = sizeof(tmp);
} else
} else if (addr >= FIXED_CODE_START
&& addr + sizeof(data) <= FIXED_CODE_END) {
- memcpy((void *)(addr), &data, sizeof(data));
+ copy_to_user_page(0, 0, 0, (void *)(addr), &data, sizeof(data));
copied = sizeof(data);
} else
CPU, bfin_revid());
}
+ /* We can't run on BF548-0.1 due to ANOMALY 05000448 */
+ if (bfin_cpuid() == 0x27de && bfin_revid() == 1)
+ panic("You can't run on this processor due to 05000448\n");
+
printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
icache_size = 0;
seq_printf(m, "cache size\t: %d KB(L1 icache) "
- "%d KB(L1 dcache-%s) %d KB(L2 cache)\n",
+ "%d KB(L1 dcache%s) %d KB(L2 cache)\n",
icache_size, dcache_size,
#if defined CONFIG_BFIN_WB
- "wb"
+ "-wb"
#elif defined CONFIG_BFIN_WT
- "wt"
+ "-wt"
#endif
"", 0);
write_seqlock(&xtime_lock);
#if defined(CONFIG_TICK_SOURCE_SYSTMR0) && !defined(CONFIG_IPIPE)
-/* FIXME: Here TIMIL0 is not set when IPIPE enabled, why? */
+ /*
+ * TIMIL0 is latched in __ipipe_grab_irq() when the I-Pipe is
+ * enabled.
+ */
if (get_gptimer_status(0) & TIMER_STATUS_TIMIL0) {
#endif
do_timer(1);
.name = "bfin_mac",
.dev.platform_data = &bfin_mii_bus,
};
-#endif
#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
static struct dsa_platform_data ksz8893m_switch_data = {
.dev.platform_data = &ksz8893m_switch_data,
};
#endif
+#endif
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
};
#endif
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if defined(CONFIG_NET_DSA_KSZ8893M) \
|| defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
/* SPI SWITCH CHIP */
.bits_per_word = 8,
};
#endif
+#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
- .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+ .enable_dma = 0,
.bits_per_word = 8,
};
#endif
},
#endif
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if defined(CONFIG_NET_DSA_KSZ8893M) \
|| defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
{
.mode = SPI_MODE_3,
},
#endif
+#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
- .modalias = "spi_mmc_dummy",
+ .modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = 0,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
- .mode = SPI_MODE_3,
- },
- {
- .modalias = "spi_mmc",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = CONFIG_SPI_MMC_CS_CHAN,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
+ .chip_select = 5,
+ .controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
&bfin_mii_bus,
&bfin_mac_device,
-#endif
-
#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
&ksz8893m_switch_device,
#endif
+#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
&bfin_spi0_device,
* File: include/asm-blackfin/mach-bf518/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
/* This file shoule be up to date with:
- * - ????
+ * - Revision B, 02/03/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
#define ANOMALY_05000122 (1)
/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
#define ANOMALY_05000245 (1)
+/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
+#define ANOMALY_05000254 (1)
/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
#define ANOMALY_05000265 (1)
/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
#define ANOMALY_05000443 (1)
/* Incorrect L1 Instruction Bank B Memory Map Location */
#define ANOMALY_05000444 (1)
+/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
+#define ANOMALY_05000452 (1)
+/* PWM_TRIPB Signal Not Available on PG10 */
+#define ANOMALY_05000453 (1)
+/* PPI_FS3 is Driven One Half Cycle Later Than PPI Data */
+#define ANOMALY_05000455 (1)
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000125 (0)
#define ANOMALY_05000263 (0)
#define ANOMALY_05000266 (0)
#define ANOMALY_05000273 (0)
+#define ANOMALY_05000278 (0)
#define ANOMALY_05000285 (0)
+#define ANOMALY_05000305 (0)
#define ANOMALY_05000307 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000312 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000353 (0)
#define ANOMALY_05000363 (0)
+#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (0)
#define ANOMALY_05000412 (0)
#define ANOMALY_05000432 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
#endif
CH_UART0_TX,
CH_UART0_RX,
#endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART0_CTS_PIN,
CONFIG_UART0_RTS_PIN,
#endif
CH_UART1_TX,
CH_UART1_RX,
#endif
-#ifdef CONFIG_BFIN_UART1_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART1_CTS_PIN,
CONFIG_UART1_RTS_PIN,
#endif
};
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
- .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+ .enable_dma = 0,
.bits_per_word = 8,
};
#endif
.controller_data = &ad9960_spi_chip_info,
},
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
- .modalias = "spi_mmc_dummy",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = 0,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
- .mode = SPI_MODE_3,
- },
- {
- .modalias = "spi_mmc",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .modalias = "mmc_spi",
+ .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = CONFIG_SPI_MMC_CS_CHAN,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
+ .chip_select = 5,
+ .controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
};
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
- .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+ .enable_dma = 0,
.bits_per_word = 8,
};
#endif
},
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
- .modalias = "spi_mmc_dummy",
+ .modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = 0,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
- .mode = SPI_MODE_3,
- },
- {
- .modalias = "spi_mmc",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = CONFIG_SPI_MMC_CS_CHAN,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
+ .chip_select = 5,
+ .controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
* File: include/asm-blackfin/mach-bf527/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
#define ANOMALY_05000263 (0)
#define ANOMALY_05000266 (0)
#define ANOMALY_05000273 (0)
+#define ANOMALY_05000278 (0)
#define ANOMALY_05000285 (0)
+#define ANOMALY_05000305 (0)
#define ANOMALY_05000307 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000312 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000363 (0)
#define ANOMALY_05000412 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
#endif
CH_UART0_TX,
CH_UART0_RX,
#endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART0_CTS_PIN,
CONFIG_UART0_RTS_PIN,
#endif
CH_UART1_TX,
CH_UART1_RX,
#endif
-#ifdef CONFIG_BFIN_UART1_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART1_CTS_PIN,
CONFIG_UART1_RTS_PIN,
#endif
help
Core support for IP04/IP04 open hardware IP-PBX.
-config GENERIC_BF533_BOARD
- bool "Generic"
- help
- Generic or Custom board support.
-
endchoice
# arch/blackfin/mach-bf533/boards/Makefile
#
-obj-$(CONFIG_GENERIC_BF533_BOARD) += generic_board.o
obj-$(CONFIG_BFIN533_STAMP) += stamp.o
obj-$(CONFIG_BFIN532_IP0X) += ip0x.o
obj-$(CONFIG_BFIN533_EZKIT) += ezkit.o
};
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
- .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+ .enable_dma = 0,
.bits_per_word = 8,
};
#endif
},
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
- {
- .modalias = "spi_mmc_dummy",
- .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = 0,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
- .mode = SPI_MODE_3,
- },
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
- .modalias = "spi_mmc",
+ .modalias = "mmc_spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = CONFIG_SPI_MMC_CS_CHAN,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
+ .chip_select = 5,
+ .controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
};
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
- .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+ .enable_dma = 0,
.bits_per_word = 8,
};
#endif
},
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
- {
- .modalias = "spi_mmc_dummy",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = 0,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
- .mode = SPI_MODE_3,
- },
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
- .modalias = "spi_mmc",
+ .modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = CONFIG_SPI_MMC_CS_CHAN,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
+ .chip_select = 5,
+ .controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
+++ /dev/null
-/*
- * File: arch/blackfin/mach-bf533/generic_board.c
- * Based on: arch/blackfin/mach-bf533/ezkit.c
- * Author: Aidan Williams <aidan@nicta.com.au>
- *
- * Created: 2005
- * Description:
- *
- * Modified:
- * Copyright 2005 National ICT Australia (NICTA)
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-
-/*
- * Name the Board for the /proc/cpuinfo
- */
-const char bfin_board_name[] = "UNKNOWN BOARD";
-
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
-static struct platform_device rtc_device = {
- .name = "rtc-bfin",
- .id = -1,
-};
-#endif
-
-/*
- * Driver needs to know address, irq and flag pin.
- */
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-static struct resource smc91x_resources[] = {
- {
- .start = 0x20300300,
- .end = 0x20300300 + 16,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_PROG_INTB,
- .end = IRQ_PROG_INTB,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- }, {
- .start = IRQ_PF7,
- .end = IRQ_PF7,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = 0,
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
- {
- .start = 0xFFC00400,
- .end = 0xFFC004FF,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = CH_UART0_RX,
- .end = CH_UART0_RX+1,
- .flags = IORESOURCE_DMA,
- },
-};
-
-static struct platform_device bfin_sir0_device = {
- .name = "bfin_sir",
- .id = 0,
- .num_resources = ARRAY_SIZE(bfin_sir0_resources),
- .resource = bfin_sir0_resources,
-};
-#endif
-#endif
-
-static struct platform_device *generic_board_devices[] __initdata = {
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
- &rtc_device,
-#endif
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
- &smc91x_device,
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
- &bfin_sir0_device,
-#endif
-#endif
-};
-
-static int __init generic_board_init(void)
-{
- printk(KERN_INFO "%s(): registering device resources\n", __func__);
- return platform_add_devices(generic_board_devices, ARRAY_SIZE(generic_board_devices));
-}
-
-arch_initcall(generic_board_init);
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* all SPI peripherals info goes here */
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
/*
* CPOL (Clock Polarity)
* 0 - Active high SCK
/* Notice: for blackfin, the speed_hz is the value of register
* SPI_BAUD, not the real baudrate */
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
- .modalias = "spi_mmc",
+ .modalias = "mmc_spi",
.max_speed_hz = 2,
.bus_num = 1,
- .chip_select = CONFIG_SPI_MMC_CS_CHAN,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
+ .chip_select = 5,
+ .controller_data = &mmc_spi_chip_info,
},
#endif
};
* File: include/asm-blackfin/mach-bf533/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
#define ANOMALY_05000301 (__SILICON_REVISION__ < 6)
/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
#define ANOMALY_05000302 (__SILICON_REVISION__ < 5)
-/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
#define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
/* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */
#define ANOMALY_05000306 (__SILICON_REVISION__ < 5)
#define ANOMALY_05000266 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000353 (1)
+#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (1)
#define ANOMALY_05000412 (0)
#define ANOMALY_05000432 (0)
#define ANOMALY_05000435 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
#endif
CH_UART_TX,
CH_UART_RX,
#endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART0_CTS_PIN,
CONFIG_UART0_RTS_PIN,
#endif
help
Board supply package for CSP Minotaur
-config GENERIC_BF537_BOARD
- bool "Generic"
- help
- Generic or Custom board support.
-
endchoice
# arch/blackfin/mach-bf537/boards/Makefile
#
-obj-$(CONFIG_GENERIC_BF537_BOARD) += generic_board.o
obj-$(CONFIG_BFIN537_STAMP) += stamp.o
obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o
obj-$(CONFIG_BFIN537_BLUETECHNIX_TCM) += tcm_bf537.o
};
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
- .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+ .enable_dma = 0,
.bits_per_word = 8,
};
#endif
},
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
- {
- .modalias = "spi_mmc_dummy",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = 7,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
- .mode = SPI_MODE_3,
- },
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
- .modalias = "spi_mmc",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .modalias = "mmc_spi",
+ .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = CONFIG_SPI_MMC_CS_CHAN,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
+ .chip_select = 1,
+ .controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
+++ /dev/null
-/*
- * File: arch/blackfin/mach-bf537/boards/generic_board.c
- * Based on: arch/blackfin/mach-bf533/boards/ezkit.c
- * Author: Aidan Williams <aidan@nicta.com.au>
- *
- * Created:
- * Description:
- *
- * Modified:
- * Copyright 2005 National ICT Australia (NICTA)
- * Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/device.h>
-#include <linux/etherdevice.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-#include <linux/usb/isp1362.h>
-#endif
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/usb/sl811.h>
-#include <asm/dma.h>
-#include <asm/bfin5xx_spi.h>
-#include <asm/reboot.h>
-#include <asm/portmux.h>
-#include <linux/spi/ad7877.h>
-
-/*
- * Name the Board for the /proc/cpuinfo
- */
-const char bfin_board_name[] = "UNKNOWN BOARD";
-
-/*
- * Driver needs to know address, irq and flag pin.
- */
-
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
-#include <linux/usb/isp1760.h>
-static struct resource bfin_isp1760_resources[] = {
- [0] = {
- .start = 0x203C0000,
- .end = 0x203C0000 + 0x000fffff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_PF7,
- .end = IRQ_PF7,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct isp1760_platform_data isp1760_priv = {
- .is_isp1761 = 0,
- .port1_disable = 0,
- .bus_width_16 = 1,
- .port1_otg = 0,
- .analog_oc = 0,
- .dack_polarity_high = 0,
- .dreq_polarity_high = 0,
-};
-
-static struct platform_device bfin_isp1760_device = {
- .name = "isp1760-hcd",
- .id = 0,
- .dev = {
- .platform_data = &isp1760_priv,
- },
- .num_resources = ARRAY_SIZE(bfin_isp1760_resources),
- .resource = bfin_isp1760_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
-static struct resource bfin_pcmcia_cf_resources[] = {
- {
- .start = 0x20310000, /* IO PORT */
- .end = 0x20312000,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 0x20311000, /* Attribute Memory */
- .end = 0x20311FFF,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_PF4,
- .end = IRQ_PF4,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
- }, {
- .start = 6, /* Card Detect PF6 */
- .end = 6,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device bfin_pcmcia_cf_device = {
- .name = "bfin_cf_pcmcia",
- .id = -1,
- .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
- .resource = bfin_pcmcia_cf_resources,
-};
-#endif
-
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
-static struct platform_device rtc_device = {
- .name = "rtc-bfin",
- .id = -1,
-};
-#endif
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-static struct resource smc91x_resources[] = {
- {
- .name = "smc91x-regs",
- .start = 0x20300300,
- .end = 0x20300300 + 16,
- .flags = IORESOURCE_MEM,
- }, {
-
- .start = IRQ_PF7,
- .end = IRQ_PF7,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = 0,
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
-};
-#endif
-
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-static struct resource dm9000_resources[] = {
- [0] = {
- .start = 0x203FB800,
- .end = 0x203FB800 + 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 0x203FB800 + 4,
- .end = 0x203FB800 + 5,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = IRQ_PF9,
- .end = IRQ_PF9,
- .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
- },
-};
-
-static struct platform_device dm9000_device = {
- .name = "dm9000",
- .id = -1,
- .num_resources = ARRAY_SIZE(dm9000_resources),
- .resource = dm9000_resources,
-};
-#endif
-
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
-static struct resource sl811_hcd_resources[] = {
- {
- .start = 0x20340000,
- .end = 0x20340000,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 0x20340004,
- .end = 0x20340004,
- .flags = IORESOURCE_MEM,
- }, {
- .start = CONFIG_USB_SL811_BFIN_IRQ,
- .end = CONFIG_USB_SL811_BFIN_IRQ,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
-void sl811_port_power(struct device *dev, int is_on)
-{
- gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
- gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
-
-}
-#endif
-
-static struct sl811_platform_data sl811_priv = {
- .potpg = 10,
- .power = 250, /* == 500mA */
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
- .port_power = &sl811_port_power,
-#endif
-};
-
-static struct platform_device sl811_hcd_device = {
- .name = "sl811-hcd",
- .id = 0,
- .dev = {
- .platform_data = &sl811_priv,
- },
- .num_resources = ARRAY_SIZE(sl811_hcd_resources),
- .resource = sl811_hcd_resources,
-};
-#endif
-
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-static struct resource isp1362_hcd_resources[] = {
- {
- .start = 0x20360000,
- .end = 0x20360000,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 0x20360004,
- .end = 0x20360004,
- .flags = IORESOURCE_MEM,
- }, {
- .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
- .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-
-static struct isp1362_platform_data isp1362_priv = {
- .sel15Kres = 1,
- .clknotstop = 0,
- .oc_enable = 0,
- .int_act_high = 0,
- .int_edge_triggered = 0,
- .remote_wakeup_connected = 0,
- .no_power_switching = 1,
- .power_switching_mode = 0,
-};
-
-static struct platform_device isp1362_hcd_device = {
- .name = "isp1362-hcd",
- .id = 0,
- .dev = {
- .platform_data = &isp1362_priv,
- },
- .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
- .resource = isp1362_hcd_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
-static struct platform_device bfin_mii_bus = {
- .name = "bfin_mii_bus",
-};
-
-static struct platform_device bfin_mac_device = {
- .name = "bfin_mac",
- .dev.platform_data = &bfin_mii_bus,
-};
-#endif
-
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
-static struct resource net2272_bfin_resources[] = {
- {
- .start = 0x20300000,
- .end = 0x20300000 + 0x100,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_PF7,
- .end = IRQ_PF7,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-
-static struct platform_device net2272_bfin_device = {
- .name = "net2272",
- .id = -1,
- .num_resources = ARRAY_SIZE(net2272_bfin_resources),
- .resource = net2272_bfin_resources,
-};
-#endif
-
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
-#if defined(CONFIG_MTD_M25P80) \
- || defined(CONFIG_MTD_M25P80_MODULE)
-static struct mtd_partition bfin_spi_flash_partitions[] = {
- {
- .name = "bootloader(spi)",
- .size = 0x00020000,
- .offset = 0,
- .mask_flags = MTD_CAP_ROM
- }, {
- .name = "linux kernel(spi)",
- .size = 0xe0000,
- .offset = 0x20000
- }, {
- .name = "file system(spi)",
- .size = 0x700000,
- .offset = 0x00100000,
- }
-};
-
-static struct flash_platform_data bfin_spi_flash_data = {
- .name = "m25p80",
- .parts = bfin_spi_flash_partitions,
- .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
- .type = "m25p64",
-};
-
-/* SPI flash chip (m25p64) */
-static struct bfin5xx_spi_chip spi_flash_chip_info = {
- .enable_dma = 0, /* use dma transfer with this chip*/
- .bits_per_word = 8,
-};
-#endif
-
-#if defined(CONFIG_SPI_ADC_BF533) \
- || defined(CONFIG_SPI_ADC_BF533_MODULE)
-/* SPI ADC chip */
-static struct bfin5xx_spi_chip spi_adc_chip_info = {
- .enable_dma = 1, /* use dma transfer with this chip*/
- .bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
- || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
-static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
- .enable_dma = 0,
- .bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
- .enable_dma = 0,
- .bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
- .enable_dma = 1,
- .bits_per_word = 8,
-};
-#endif
-
-#if defined(CONFIG_PBX)
-static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
- .ctl_reg = 0x4, /* send zero */
- .enable_dma = 0,
- .bits_per_word = 8,
- .cs_change_per_word = 1,
-};
-#endif
-
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
-static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
- .enable_dma = 0,
- .bits_per_word = 16,
-};
-
-static const struct ad7877_platform_data bfin_ad7877_ts_info = {
- .model = 7877,
- .vref_delay_usecs = 50, /* internal, no capacitor */
- .x_plate_ohms = 419,
- .y_plate_ohms = 486,
- .pressure_max = 1000,
- .pressure_min = 0,
- .stopacq_polarity = 1,
- .first_conversion_delay = 3,
- .acquisition_time = 1,
- .averaging = 1,
- .pen_down_acc_interval = 1,
-};
-#endif
-
-static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
- || defined(CONFIG_MTD_M25P80_MODULE)
- {
- /* the modalias must be the same as spi device driver name */
- .modalias = "m25p80", /* Name of spi_driver for this device */
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0, /* Framework bus number */
- .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
- .platform_data = &bfin_spi_flash_data,
- .controller_data = &spi_flash_chip_info,
- .mode = SPI_MODE_3,
- },
-#endif
-
-#if defined(CONFIG_SPI_ADC_BF533) \
- || defined(CONFIG_SPI_ADC_BF533_MODULE)
- {
- .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
- .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0, /* Framework bus number */
- .chip_select = 1, /* Framework chip select. */
- .platform_data = NULL, /* No spi_driver specific config */
- .controller_data = &spi_adc_chip_info,
- },
-#endif
-
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
- || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
- {
- .modalias = "ad1836-spi",
- .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
- .controller_data = &ad1836_spi_chip_info,
- },
-#endif
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
- {
- .modalias = "ad9960-spi",
- .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = 1,
- .controller_data = &ad9960_spi_chip_info,
- },
-#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
- {
- .modalias = "spi_mmc_dummy",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = 0,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
- .mode = SPI_MODE_3,
- },
- {
- .modalias = "spi_mmc",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = CONFIG_SPI_MMC_CS_CHAN,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
- .mode = SPI_MODE_3,
- },
-#endif
-#if defined(CONFIG_PBX)
- {
- .modalias = "fxs-spi",
- .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = 8 - CONFIG_J11_JUMPER,
- .controller_data = &spi_si3xxx_chip_info,
- .mode = SPI_MODE_3,
- },
- {
- .modalias = "fxo-spi",
- .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = 8 - CONFIG_J19_JUMPER,
- .controller_data = &spi_si3xxx_chip_info,
- .mode = SPI_MODE_3,
- },
-#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
- {
- .modalias = "ad7877",
- .platform_data = &bfin_ad7877_ts_info,
- .irq = IRQ_PF6,
- .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = 1,
- .controller_data = &spi_ad7877_chip_info,
- },
-#endif
-};
-
-/* SPI controller data */
-static struct bfin5xx_spi_master bfin_spi0_info = {
- .num_chipselect = 8,
- .enable_dma = 1, /* master has the ability to do dma transfer */
- .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
-};
-
-/* SPI (0) */
-static struct resource bfin_spi0_resource[] = {
- [0] = {
- .start = SPI0_REGBASE,
- .end = SPI0_REGBASE + 0xFF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = CH_SPI,
- .end = CH_SPI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device bfin_spi0_device = {
- .name = "bfin-spi",
- .id = 0, /* Bus number */
- .num_resources = ARRAY_SIZE(bfin_spi0_resource),
- .resource = bfin_spi0_resource,
- .dev = {
- .platform_data = &bfin_spi0_info, /* Passed to driver */
- },
-};
-#endif /* spi master and devices */
-
-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
-static struct platform_device bfin_fb_device = {
- .name = "bf537-lq035",
-};
-#endif
-
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-static struct platform_device bfin_fb_adv7393_device = {
- .name = "bfin-adv7393",
-};
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
- {
- .start = 0xFFC00400,
- .end = 0xFFC004FF,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 0xFFC02000,
- .end = 0xFFC020FF,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device bfin_uart_device = {
- .name = "bfin-uart",
- .id = 1,
- .num_resources = ARRAY_SIZE(bfin_uart_resources),
- .resource = bfin_uart_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
- {
- .start = 0xFFC00400,
- .end = 0xFFC004FF,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = CH_UART0_RX,
- .end = CH_UART0_RX+1,
- .flags = IORESOURCE_DMA,
- },
-};
-
-static struct platform_device bfin_sir0_device = {
- .name = "bfin_sir",
- .id = 0,
- .num_resources = ARRAY_SIZE(bfin_sir0_resources),
- .resource = bfin_sir0_resources,
-};
-#endif
-#ifdef CONFIG_BFIN_SIR1
-static struct resource bfin_sir1_resources[] = {
- {
- .start = 0xFFC02000,
- .end = 0xFFC020FF,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = CH_UART1_RX,
- .end = CH_UART1_RX+1,
- .flags = IORESOURCE_DMA,
- },
-};
-
-static struct platform_device bfin_sir1_device = {
- .name = "bfin_sir",
- .id = 1,
- .num_resources = ARRAY_SIZE(bfin_sir1_resources),
- .resource = bfin_sir1_resources,
-};
-#endif
-#endif
-
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
-static struct resource bfin_twi0_resource[] = {
- [0] = {
- .start = TWI0_REGBASE,
- .end = TWI0_REGBASE + 0xFF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_TWI,
- .end = IRQ_TWI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device i2c_bfin_twi_device = {
- .name = "i2c-bfin-twi",
- .id = 0,
- .num_resources = ARRAY_SIZE(bfin_twi0_resource),
- .resource = bfin_twi0_resource,
-};
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
-static struct platform_device bfin_sport0_uart_device = {
- .name = "bfin-sport-uart",
- .id = 0,
-};
-
-static struct platform_device bfin_sport1_uart_device = {
- .name = "bfin-sport-uart",
- .id = 1,
-};
-#endif
-
-static struct platform_device *stamp_devices[] __initdata = {
-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
- &bfin_pcmcia_cf_device,
-#endif
-
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
- &rtc_device,
-#endif
-
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
- &sl811_hcd_device,
-#endif
-
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
- &isp1362_hcd_device,
-#endif
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
- &smc91x_device,
-#endif
-
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
- &dm9000_device,
-#endif
-
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
- &bfin_mii_bus,
- &bfin_mac_device,
-#endif
-
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
- &net2272_bfin_device,
-#endif
-
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
- &bfin_isp1760_device,
-#endif
-
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- &bfin_spi0_device,
-#endif
-
-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
- &bfin_fb_device,
-#endif
-
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
- &bfin_fb_adv7393_device,
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
- &bfin_uart_device,
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
- &bfin_sir0_device,
-#endif
-#ifdef CONFIG_BFIN_SIR1
- &bfin_sir1_device,
-#endif
-#endif
-
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
- &i2c_bfin_twi_device,
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
- &bfin_sport0_uart_device,
- &bfin_sport1_uart_device,
-#endif
-};
-
-static int __init generic_init(void)
-{
- printk(KERN_INFO "%s(): registering device resources\n", __func__);
- platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- spi_register_board_info(bfin_spi_board_info,
- ARRAY_SIZE(bfin_spi_board_info));
-#endif
-
- return 0;
-}
-
-arch_initcall(generic_init);
-
-void native_machine_restart(char *cmd)
-{
- /* workaround reboot hang when booting from SPI */
- if ((bfin_read_SYSCR() & 0x7) == 0x3)
- bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
-}
-
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
-void bfin_get_ether_addr(char *addr)
-{
- random_ether_addr(addr);
- printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
-}
-EXPORT_SYMBOL(bfin_get_ether_addr);
-#endif
};
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
- .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+ .enable_dma = 0,
.bits_per_word = 8,
};
#endif
},
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
- .modalias = "spi_mmc_dummy",
+ .modalias = "mmc_spi",
.max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = 0,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
- .mode = SPI_MODE_3,
- },
- {
- .modalias = "spi_mmc",
- .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = CONFIG_SPI_MMC_CS_CHAN,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
+ .chip_select = 5,
+ .controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
};
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
- .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+ .enable_dma = 0,
.bits_per_word = 8,
};
#endif
.controller_data = &ad9960_spi_chip_info,
},
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
- {
- .modalias = "spi_mmc_dummy",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = 7,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
- .mode = SPI_MODE_3,
- },
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
- .modalias = "spi_mmc",
+ .modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = CONFIG_SPI_MMC_CS_CHAN,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
+ .chip_select = 5,
+ .controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
};
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
- .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+ .enable_dma = 0,
.bits_per_word = 8,
};
#endif
},
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
- {
- .modalias = "spi_mmc_dummy",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = 7,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
- .mode = SPI_MODE_3,
- },
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
- .modalias = "spi_mmc",
+ .modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = CONFIG_SPI_MMC_CS_CHAN,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
+ .chip_select = 5,
+ .controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
* File: include/asm-blackfin/mach-bf537/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
#define ANOMALY_05000301 (1)
/* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */
#define ANOMALY_05000304 (__SILICON_REVISION__ < 3)
-/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
#define ANOMALY_05000305 (__SILICON_REVISION__ < 3)
/* SCKELOW Bit Does Not Maintain State Through Hibernate */
#define ANOMALY_05000307 (__SILICON_REVISION__ < 3)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000353 (1)
#define ANOMALY_05000363 (0)
+#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (1)
#define ANOMALY_05000412 (0)
#define ANOMALY_05000432 (0)
#define ANOMALY_05000435 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
#endif
CH_UART0_TX,
CH_UART0_RX,
#endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART0_CTS_PIN,
CONFIG_UART0_RTS_PIN,
#endif
CH_UART1_TX,
CH_UART1_RX,
#endif
-#ifdef CONFIG_BFIN_UART1_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART1_CTS_PIN,
CONFIG_UART1_RTS_PIN,
#endif
* File: include/asm-blackfin/mach-bf538/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
#define ANOMALY_05000198 (0)
#define ANOMALY_05000230 (0)
#define ANOMALY_05000263 (0)
+#define ANOMALY_05000305 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000353 (1)
#define ANOMALY_05000363 (0)
+#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (1)
#define ANOMALY_05000412 (0)
#define ANOMALY_05000432 (0)
#define ANOMALY_05000435 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
#endif
CH_UART0_TX,
CH_UART0_RX,
#endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART0_CTS_PIN,
CONFIG_UART0_RTS_PIN,
#endif
CH_UART1_TX,
CH_UART1_RX,
#endif
-#ifdef CONFIG_BFIN_UART1_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART1_CTS_PIN,
CONFIG_UART1_RTS_PIN,
#endif
* File: include/asm-blackfin/mach-bf548/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
/* This file shoule be up to date with:
- * - Revision G, 08/07/2008; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
+ * - Revision H, 01/16/2009; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
#define ANOMALY_05000371 (__SILICON_REVISION__ < 2)
/* USB DP/DM Data Pins May Lose State When Entering Hibernate */
#define ANOMALY_05000372 (__SILICON_REVISION__ < 1)
-/* Mobile DDR Operation Not Functional */
-#define ANOMALY_05000377 (1)
/* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */
#define ANOMALY_05000378 (__SILICON_REVISION__ < 2)
/* 16-Bit NAND FLASH Boot Mode Is Not Functional */
#define ANOMALY_05000429 (__SILICON_REVISION__ < 2)
/* Software System Reset Corrupts PLL_LOCKCNT Register */
#define ANOMALY_05000430 (__SILICON_REVISION__ >= 2)
+/* Incorrect Use of Stack in Lockbox Firmware During Authentication */
+#define ANOMALY_05000431 (__SILICON_REVISION__ < 3)
+/* OTP Write Accesses Not Supported */
+#define ANOMALY_05000442 (__SILICON_REVISION__ < 1)
/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
#define ANOMALY_05000443 (1)
+/* CDMAPRIO and L2DMAPRIO Bits in the SYSCR Register Are Not Functional */
+#define ANOMALY_05000446 (1)
+/* UART IrDA Receiver Fails on Extended Bit Pulses */
+#define ANOMALY_05000447 (1)
+/* DDR Clock Duty Cycle Spec Violation (tCH, tCL) */
+#define ANOMALY_05000448 (__SILICON_REVISION__ == 1)
+/* Reduced Timing Margins on DDR Output Setup and Hold (tDS and tDH) */
+#define ANOMALY_05000449 (__SILICON_REVISION__ == 1)
+/* USB DMA Mode 1 Short Packet Data Corruption */
+#define ANOMALY_05000450 (1
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000125 (0)
#define ANOMALY_05000263 (0)
#define ANOMALY_05000266 (0)
#define ANOMALY_05000273 (0)
+#define ANOMALY_05000278 (0)
+#define ANOMALY_05000305 (0)
#define ANOMALY_05000307 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000323 (0)
#define UART_ENABLE_INTS(x, v) UART_SET_IER(x, v)
#define UART_DISABLE_INTS(x) UART_CLEAR_IER(x, 0xF)
-#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
+#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART2_CTSRTS)
# define CONFIG_SERIAL_BFIN_CTSRTS
# ifndef CONFIG_UART0_CTS_PIN
# define CONFIG_UART0_RTS_PIN -1
# endif
-# ifndef CONFIG_UART1_CTS_PIN
-# define CONFIG_UART1_CTS_PIN -1
+# ifndef CONFIG_UART2_CTS_PIN
+# define CONFIG_UART2_CTS_PIN -1
# endif
-# ifndef CONFIG_UART1_RTS_PIN
-# define CONFIG_UART1_RTS_PIN -1
+# ifndef CONFIG_UART2_RTS_PIN
+# define CONFIG_UART2_RTS_PIN -1
# endif
#endif
CH_UART0_TX,
CH_UART0_RX,
#endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART0_CTS_PIN,
CONFIG_UART0_RTS_PIN,
#endif
#ifdef CONFIG_SERIAL_BFIN_DMA
CH_UART1_TX,
CH_UART1_RX,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+ 0,
+ 0,
#endif
},
#endif
CH_UART2_TX,
CH_UART2_RX,
#endif
-#ifdef CONFIG_BFIN_UART2_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART2_CTS_PIN,
CONFIG_UART2_RTS_PIN,
#endif
#ifdef CONFIG_SERIAL_BFIN_DMA
CH_UART3_TX,
CH_UART3_RX,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+ 0,
+ 0,
#endif
},
#endif
#define IRQ_MXVR_ERROR BFIN_IRQ(51) /* MXVR Status (Error) Interrupt */
#define IRQ_MXVR_MSG BFIN_IRQ(52) /* MXVR Message Interrupt */
#define IRQ_MXVR_PKT BFIN_IRQ(53) /* MXVR Packet Interrupt */
-#define IRQ_EPP1_ERROR BFIN_IRQ(54) /* EPPI1 Error Interrupt */
-#define IRQ_EPP2_ERROR BFIN_IRQ(55) /* EPPI2 Error Interrupt */
+#define IRQ_EPPI1_ERROR BFIN_IRQ(54) /* EPPI1 Error Interrupt */
+#define IRQ_EPPI2_ERROR BFIN_IRQ(55) /* EPPI2 Error Interrupt */
#define IRQ_UART3_ERROR BFIN_IRQ(56) /* UART3 Status (Error) Interrupt */
#define IRQ_HOST_ERROR BFIN_IRQ(57) /* HOST Status (Error) Interrupt */
#define IRQ_PIXC_ERROR BFIN_IRQ(59) /* PIXC Status (Error) Interrupt */
#define IRQ_UART2_ERR IRQ_UART2_ERROR
#define IRQ_CAN0_ERR IRQ_CAN0_ERROR
#define IRQ_MXVR_ERR IRQ_MXVR_ERROR
-#define IRQ_EPP1_ERR IRQ_EPP1_ERROR
-#define IRQ_EPP2_ERR IRQ_EPP2_ERROR
+#define IRQ_EPPI1_ERR IRQ_EPPI1_ERROR
+#define IRQ_EPPI2_ERR IRQ_EPPI2_ERROR
#define IRQ_UART3_ERR IRQ_UART3_ERROR
#define IRQ_HOST_ERR IRQ_HOST_ERROR
#define IRQ_PIXC_ERR IRQ_PIXC_ERROR
help
CM-BF561 support for EVAL- and DEV-Board.
-config GENERIC_BF561_BOARD
- bool "Generic"
- help
- Generic or Custom board support.
-
endchoice
# arch/blackfin/mach-bf561/boards/Makefile
#
-obj-$(CONFIG_GENERIC_BF561_BOARD) += generic_board.o
obj-$(CONFIG_BFIN561_BLUETECHNIX_CM) += cm_bf561.o
obj-$(CONFIG_BFIN561_EZKIT) += ezkit.o
obj-$(CONFIG_BFIN561_TEPLA) += tepla.o
};
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
- .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+ .enable_dma = 0,
.bits_per_word = 8,
};
#endif
.controller_data = &ad9960_spi_chip_info,
},
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
- .modalias = "spi_mmc",
+ .modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = CONFIG_SPI_MMC_CS_CHAN,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
+ .chip_select = 5,
+ .controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
+++ /dev/null
-/*
- * File: arch/blackfin/mach-bf561/generic_board.c
- * Based on: arch/blackfin/mach-bf533/ezkit.c
- * Author: Aidan Williams <aidan@nicta.com.au>
- *
- * Created:
- * Description:
- *
- * Modified:
- * Copyright 2005 National ICT Australia (NICTA)
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-
-const char bfin_board_name[] = "UNKNOWN BOARD";
-
-/*
- * Driver needs to know address, irq and flag pin.
- */
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-static struct resource smc91x_resources[] = {
- {
- .start = 0x2C010300,
- .end = 0x2C010300 + 16,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_PROG_INTB,
- .end = IRQ_PROG_INTB,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- }, {
- .start = IRQ_PF9,
- .end = IRQ_PF9,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = 0,
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
- {
- .start = 0xFFC00400,
- .end = 0xFFC004FF,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = CH_UART0_RX,
- .end = CH_UART0_RX+1,
- .flags = IORESOURCE_DMA,
- },
-};
-
-static struct platform_device bfin_sir0_device = {
- .name = "bfin_sir",
- .id = 0,
- .num_resources = ARRAY_SIZE(bfin_sir0_resources),
- .resource = bfin_sir0_resources,
-};
-#endif
-#endif
-
-static struct platform_device *generic_board_devices[] __initdata = {
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
- &smc91x_device,
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
- &bfin_sir0_device,
-#endif
-#endif
-};
-
-static int __init generic_board_init(void)
-{
- printk(KERN_INFO "%s(): registering device resources\n", __func__);
- return platform_add_devices(generic_board_devices,
- ARRAY_SIZE(generic_board_devices));
-}
-
-arch_initcall(generic_board_init);
* File: include/asm-blackfin/mach-bf561/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
#define ANOMALY_05000301 (1)
/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
#define ANOMALY_05000302 (1)
-/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
#define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
/* SCKELOW Bit Does Not Maintain State Through Hibernate */
#define ANOMALY_05000307 (__SILICON_REVISION__ < 5)
#define ANOMALY_05000273 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000353 (1)
+#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (1)
#define ANOMALY_05000432 (0)
#define ANOMALY_05000435 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
#endif
CH_UART_TX,
CH_UART_RX,
#endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART0_CTS_PIN,
CONFIG_UART0_RTS_PIN,
#endif
#if (CONFIG_BOOT_LOAD & 0x3)
# error "The kernel load address must be 4 byte aligned"
#endif
+
+/* The entire kernel must be able to make a 24bit pcrel call to start of L1 */
+#if ((0xffffffff - L1_CODE_START + 1) + CONFIG_BOOT_LOAD) > 0x1000000
+# error "The kernel load address is too high; keep it below 10meg for safety"
+#endif
+
+#if ANOMALY_05000448
+# error You are using a part with anomaly 05000448, this issue causes random memory read/write failures - that means random crashes.
+#endif
/* Invalidate all instruction cache lines assocoiated with this memory area */
ENTRY(_blackfin_icache_flush_range)
+/*
+ * Walkaround to avoid loading wrong instruction after invalidating icache
+ * and following sequence is met.
+ *
+ * 1) One instruction address is cached in the instruction cache.
+ * 2) This instruction in SDRAM is changed.
+ * 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range().
+ * 4) This instruction is executed again, but the old one is loaded.
+ */
+ P0 = R0;
+ IFLUSH[P0];
do_flush IFLUSH, , nop
ENDPROC(_blackfin_icache_flush_range)
/* Flush all cache lines assocoiated with this area of memory. */
ENTRY(_blackfin_icache_dcache_flush_range)
+/*
+ * Walkaround to avoid loading wrong instruction after invalidating icache
+ * and following sequence is met.
+ *
+ * 1) One instruction address is cached in the instruction cache.
+ * 2) This instruction in SDRAM is changed.
+ * 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range().
+ * 4) This instruction is executed again, but the old one is loaded.
+ */
+ P0 = R0;
+ IFLUSH[P0];
do_flush FLUSH, IFLUSH
ENDPROC(_blackfin_icache_dcache_flush_range)
#define SDGCTL_WIDTH (1 << 31) /* SDRAM external data path width */
#define PLL_CTL_VAL \
(((CONFIG_VCO_MULT & 63) << 9) | CLKIN_HALF | \
- (PLL_BYPASS << 8) | (ANOMALY_05000265 ? 0x8000 : 0))
+ (PLL_BYPASS << 8) | (ANOMALY_05000305 ? 0 : 0x8000))
__attribute__((l1_text))
static void do_sync(void)
#endif
#ifdef PINT0_ASSIGN
+ PM_SYS_PUSH(PINT0_MASK_SET)
+ PM_SYS_PUSH(PINT1_MASK_SET)
+ PM_SYS_PUSH(PINT2_MASK_SET)
+ PM_SYS_PUSH(PINT3_MASK_SET)
PM_SYS_PUSH(PINT0_ASSIGN)
PM_SYS_PUSH(PINT1_ASSIGN)
PM_SYS_PUSH(PINT2_ASSIGN)
PM_SYS_PUSH(PINT3_ASSIGN)
+ PM_SYS_PUSH(PINT0_INVERT_SET)
+ PM_SYS_PUSH(PINT1_INVERT_SET)
+ PM_SYS_PUSH(PINT2_INVERT_SET)
+ PM_SYS_PUSH(PINT3_INVERT_SET)
+ PM_SYS_PUSH(PINT0_EDGE_SET)
+ PM_SYS_PUSH(PINT1_EDGE_SET)
+ PM_SYS_PUSH(PINT2_EDGE_SET)
+ PM_SYS_PUSH(PINT3_EDGE_SET)
#endif
PM_SYS_PUSH(EBIU_AMBCTL0)
PM_SYS_POP(EBIU_AMBCTL0)
#ifdef PINT0_ASSIGN
+ PM_SYS_POP(PINT3_EDGE_SET)
+ PM_SYS_POP(PINT2_EDGE_SET)
+ PM_SYS_POP(PINT1_EDGE_SET)
+ PM_SYS_POP(PINT0_EDGE_SET)
+ PM_SYS_POP(PINT3_INVERT_SET)
+ PM_SYS_POP(PINT2_INVERT_SET)
+ PM_SYS_POP(PINT1_INVERT_SET)
+ PM_SYS_POP(PINT0_INVERT_SET)
PM_SYS_POP(PINT3_ASSIGN)
PM_SYS_POP(PINT2_ASSIGN)
PM_SYS_POP(PINT1_ASSIGN)
PM_SYS_POP(PINT0_ASSIGN)
+ PM_SYS_POP(PINT3_MASK_SET)
+ PM_SYS_POP(PINT2_MASK_SET)
+ PM_SYS_POP(PINT1_MASK_SET)
+ PM_SYS_POP(PINT0_MASK_SET)
#endif
#ifdef SICA_IWR1
p2 = [p2];
[p2+(TASK_THREAD+THREAD_KSP)] = sp;
+#ifdef CONFIG_IPIPE
+ r0 = sp;
+ SP += -12;
+ call ___ipipe_syscall_root;
+ SP += 12;
+ cc = r0 == 1;
+ if cc jump .Lsyscall_really_exit;
+ cc = r0 == -1;
+ if cc jump .Lresume_userspace;
+ r3 = [sp + PT_R3];
+ r4 = [sp + PT_R4];
+ p0 = [sp + PT_ORIG_P0];
+#endif /* CONFIG_IPIPE */
/* Check the System Call */
r7 = __NR_syscall;
r7 = r7 & r4;
.Lsyscall_resched:
+#ifdef CONFIG_IPIPE
+ cc = BITTST(r7, TIF_IRQ_SYNC);
+ if !cc jump .Lsyscall_no_irqsync;
+ [--sp] = reti;
+ r0 = [sp++];
+ SP += -12;
+ call ___ipipe_sync_root;
+ SP += 12;
+ jump .Lresume_userspace_1;
+.Lsyscall_no_irqsync:
+#endif
cc = BITTST(r7, TIF_NEED_RESCHED);
if !cc jump .Lsyscall_sigpending;
.Lsyscall_really_exit:
r5 = [sp + PT_RESERVED];
rets = r5;
+#ifdef CONFIG_IPIPE
+ [--sp] = reti;
+ r5 = [sp++];
+#endif /* CONFIG_IPIPE */
rts;
ENDPROC(_system_call)
ENDPROC(_resume)
ENTRY(_ret_from_exception)
+#ifdef CONFIG_IPIPE
+ [--sp] = rets;
+ SP += -12;
+ call ___ipipe_check_root
+ SP += 12
+ rets = [sp++];
+ cc = r0 == 0;
+ if cc jump 4f; /* not on behalf of Linux, get out */
+#endif /* CONFIG_IPIPE */
p2.l = lo(IPEND);
p2.h = hi(IPEND);
rts;
ENDPROC(_ret_from_exception)
+#ifdef CONFIG_IPIPE
+
+_sync_root_irqs:
+ [--sp] = reti; /* Reenable interrupts */
+ r0 = [sp++];
+ jump.l ___ipipe_sync_root
+
+_resume_kernel_from_int:
+ r0.l = _sync_root_irqs
+ r0.h = _sync_root_irqs
+ [--sp] = rets;
+ [--sp] = ( r7:4, p5:3 );
+ SP += -12;
+ call ___ipipe_call_irqtail
+ SP += 12;
+ ( r7:4, p5:3 ) = [sp++];
+ rets = [sp++];
+ rts
+#else
+#define _resume_kernel_from_int 2f
+#endif
+
ENTRY(_return_from_int)
/* If someone else already raised IRQ 15, do nothing. */
csync;
r1 = r0 - r1;
r2 = r0 & r1;
cc = r2 == 0;
- if !cc jump 2f;
+ if !cc jump _resume_kernel_from_int;
/* Lower the interrupt level to 15. */
p0.l = lo(EVT15);
#ifdef CONFIG_IPIPE
ENTRY(___ipipe_call_irqtail)
+ p0 = r0;
r0.l = 1f;
r0.h = 1f;
reti = r0;
1:
[--sp] = rets;
[--sp] = ( r7:4, p5:3 );
- p0.l = ___ipipe_irq_tail_hook;
- p0.h = ___ipipe_irq_tail_hook;
- p0 = [p0];
sp += -12;
call (p0);
sp += 12;
p0.h = hi(EVT14);
[p0] = r0;
csync;
- r0 = 0x401f;
+ r0 = 0x401f (z);
sti r0;
raise 14;
[--sp] = reti; /* IRQs on. */
p0.h = _bfin_irq_flags;
r0 = [p0];
sti r0;
-#if 0 /* FIXME: this actually raises scheduling latencies */
- /* Reenable interrupts */
- [--sp] = reti;
- r0 = [sp++];
-#endif
rts;
ENDPROC(___ipipe_call_irqtail)
+
#endif /* CONFIG_IPIPE */
static void bfin_internal_mask_irq(unsigned int irq)
{
+ unsigned long flags;
+
#ifdef CONFIG_BF53x
+ local_irq_save_hw(flags);
bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() &
~(1 << SIC_SYSIRQ(irq)));
#else
unsigned mask_bank, mask_bit;
+ local_irq_save_hw(flags);
mask_bank = SIC_SYSIRQ(irq) / 32;
mask_bit = SIC_SYSIRQ(irq) % 32;
bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) &
~(1 << mask_bit));
#endif
#endif
+ local_irq_restore_hw(flags);
}
static void bfin_internal_unmask_irq(unsigned int irq)
{
+ unsigned long flags;
+
#ifdef CONFIG_BF53x
+ local_irq_save_hw(flags);
bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() |
(1 << SIC_SYSIRQ(irq)));
#else
unsigned mask_bank, mask_bit;
+ local_irq_save_hw(flags);
mask_bank = SIC_SYSIRQ(irq) / 32;
mask_bit = SIC_SYSIRQ(irq) % 32;
bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) |
(1 << mask_bit));
#endif
#endif
+ local_irq_restore_hw(flags);
}
#ifdef CONFIG_PM
static inline void bfin_set_irq_handler(unsigned irq, irq_flow_handler_t handle)
{
#ifdef CONFIG_IPIPE
- _set_irq_handler(irq, handle_edge_irq);
+ _set_irq_handler(irq, handle_level_irq);
#else
struct irq_desc *desc = irq_desc + irq;
/* May not call generic set_irq_handler() due to spinlock
#endif
default:
#ifdef CONFIG_IPIPE
- /*
- * We want internal interrupt sources to be masked, because
- * ISRs may trigger interrupts recursively (e.g. DMA), but
- * interrupts are _not_ masked at CPU level. So let's handle
- * them as level interrupts.
- */
- set_irq_handler(irq, handle_level_irq);
+ /*
+ * We want internal interrupt sources to be
+ * masked, because ISRs may trigger interrupts
+ * recursively (e.g. DMA), but interrupts are
+ * _not_ masked at CPU level. So let's handle
+ * most of them as level interrupts, except
+ * the timer interrupt which is special.
+ */
+ if (irq == IRQ_SYSTMR || irq == IRQ_CORETMR)
+ set_irq_handler(irq, handle_simple_irq);
+ else
+ set_irq_handler(irq, handle_level_irq);
#else /* !CONFIG_IPIPE */
set_irq_handler(irq, handle_simple_irq);
#endif /* !CONFIG_IPIPE */
#ifdef CONFIG_IPIPE
for (irq = 0; irq < NR_IRQS; irq++) {
- struct irq_desc *desc = irq_desc + irq;
+ struct irq_desc *desc = irq_to_desc(irq);
desc->ic_prio = __ipipe_get_irq_priority(irq);
- desc->thr_prio = __ipipe_get_irqthread_priority(irq);
}
#endif /* CONFIG_IPIPE */
return IVG15;
}
-int __ipipe_get_irqthread_priority(unsigned irq)
-{
- int ient, prio;
- int demux_irq;
-
- /* The returned priority value is rescaled to [0..IVG13+1]
- * with 0 being the lowest effective priority level. */
-
- if (irq <= IRQ_CORETMR)
- return IVG13 - irq + 1;
-
- /* GPIO IRQs are given the priority of the demux
- * interrupt. */
- if (IS_GPIOIRQ(irq)) {
-#if defined(CONFIG_BF54x)
- u32 bank = PINT_2_BANK(irq2pint_lut[irq - SYS_IRQS]);
- demux_irq = (bank == 0 ? IRQ_PINT0 :
- bank == 1 ? IRQ_PINT1 :
- bank == 2 ? IRQ_PINT2 :
- IRQ_PINT3);
-#elif defined(CONFIG_BF561)
- demux_irq = (irq >= IRQ_PF32 ? IRQ_PROG2_INTA :
- irq >= IRQ_PF16 ? IRQ_PROG1_INTA :
- IRQ_PROG0_INTA);
-#elif defined(CONFIG_BF52x)
- demux_irq = (irq >= IRQ_PH0 ? IRQ_PORTH_INTA :
- irq >= IRQ_PG0 ? IRQ_PORTG_INTA :
- IRQ_PORTF_INTA);
-#else
- demux_irq = irq;
-#endif
- return IVG13 - PRIO_GPIODEMUX(demux_irq) + 1;
- }
-
- /* The GPIO demux interrupt is given a lower priority
- * than the GPIO IRQs, so that its threaded handler
- * unmasks the interrupt line after the decoded IRQs
- * have been processed. */
- prio = PRIO_GPIODEMUX(irq);
- /* demux irq? */
- if (prio != -1)
- return IVG13 - prio;
-
- for (ient = 0; ient < NR_PERI_INTS; ient++) {
- struct ivgx *ivg = ivg_table + ient;
- if (ivg->irqno == irq) {
- for (prio = 0; prio <= IVG13-IVG7; prio++) {
- if (ivg7_13[prio].ifirst <= ivg &&
- ivg7_13[prio].istop > ivg)
- return IVG7 - prio;
- }
- }
- }
-
- return 0;
-}
-
/* Hw interrupts are disabled on entry (check SAVE_CONTEXT). */
#ifdef CONFIG_DO_IRQ_L1
__attribute__((l1_text))
#endif
asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
{
+ struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr();
+ struct ipipe_domain *this_domain = ipipe_current_domain;
struct ivgx *ivg_stop = ivg7_13[vec-IVG7].istop;
struct ivgx *ivg = ivg7_13[vec-IVG7].ifirst;
- int irq;
+ int irq, s;
if (likely(vec == EVT_IVTMR_P)) {
irq = IRQ_CORETMR;
- goto handle_irq;
+ goto core_tick;
}
SSYNC();
irq = ivg->irqno;
if (irq == IRQ_SYSTMR) {
+#ifdef CONFIG_GENERIC_CLOCKEVENTS
+core_tick:
+#else
bfin_write_TIMER_STATUS(1); /* Latch TIMIL0 */
+#endif
/* This is basically what we need from the register frame. */
__raw_get_cpu_var(__ipipe_tick_regs).ipend = regs->ipend;
__raw_get_cpu_var(__ipipe_tick_regs).pc = regs->pc;
- if (!ipipe_root_domain_p)
- __raw_get_cpu_var(__ipipe_tick_regs).ipend |= 0x10;
- else
+ if (this_domain != ipipe_root_domain)
__raw_get_cpu_var(__ipipe_tick_regs).ipend &= ~0x10;
+ else
+ __raw_get_cpu_var(__ipipe_tick_regs).ipend |= 0x10;
}
-handle_irq:
+#ifndef CONFIG_GENERIC_CLOCKEVENTS
+core_tick:
+#endif
+ if (this_domain == ipipe_root_domain) {
+ s = __test_and_set_bit(IPIPE_SYNCDEFER_FLAG, &p->status);
+ barrier();
+ }
ipipe_trace_irq_entry(irq);
__ipipe_handle_irq(irq, regs);
- ipipe_trace_irq_exit(irq);
+ ipipe_trace_irq_exit(irq);
- if (ipipe_root_domain_p)
- return !test_bit(IPIPE_STALL_FLAG, &ipipe_root_cpudom_var(status));
+ if (this_domain == ipipe_root_domain) {
+ set_thread_flag(TIF_IRQ_SYNC);
+ if (!s) {
+ __clear_bit(IPIPE_SYNCDEFER_FLAG, &p->status);
+ return !test_bit(IPIPE_STALL_FLAG, &p->status);
+ }
+ }
return 0;
}
kfree(msg);
break;
case BFIN_IPI_CALL_FUNC:
+ spin_unlock(&msg_queue->lock);
ipi_call_function(cpu, msg);
+ spin_lock(&msg_queue->lock);
break;
case BFIN_IPI_CPU_STOP:
+ spin_unlock(&msg_queue->lock);
ipi_cpu_stop(cpu);
+ spin_lock(&msg_queue->lock);
kfree(msg);
break;
default:
smp_flush_data.start = start;
smp_flush_data.end = end;
- if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 1))
+ if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 0))
printk(KERN_WARNING "SMP: failed to run I-cache flush request on other CPUs\n");
}
EXPORT_SYMBOL_GPL(smp_icache_flush_range_others);
}
}
-asmlinkage void init_pda(void)
+asmlinkage void __init init_pda(void)
{
unsigned int cpu = raw_smp_processor_id();
if (SN_DMA_ADDRTYPE(dma_flags) == SN_DMA_ADDR_PHYS)
pci_addr = IS_PIC_SOFT(pcibus_info) ?
PHYS_TO_DMA(paddr) :
- PHYS_TO_TIODMA(paddr) | dma_attributes;
+ PHYS_TO_TIODMA(paddr);
else
- pci_addr = IS_PIC_SOFT(pcibus_info) ?
- paddr :
- paddr | dma_attributes;
+ pci_addr = paddr;
+ pci_addr |= dma_attributes;
/* Handle Bus mode */
if (IS_PCIX(pcibus_info))
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfdma.h>
+#include <asm/mcfuart.h>
/***************************************************************************/
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
-#include <asm/mcfqspi.h>
#ifdef CONFIG_MTD_PARTITIONS
#include <linux/mtd/partitions.h>
/***************************************************************************/
void coldfire_reset(void);
-static void coldfire_qspi_cs_control(u8 cs, u8 command);
-
-/***************************************************************************/
-
-#if defined(CONFIG_SPI)
-
-#if defined(CONFIG_WILDFIRE)
-#define SPI_NUM_CHIPSELECTS 0x02
-#define SPI_PAR_VAL 0x07 /* Enable DIN, DOUT, CLK */
-#define SPI_CS_MASK 0x18
-
-#define FLASH_BLOCKSIZE (1024*64)
-#define FLASH_NUMBLOCKS 16
-#define FLASH_TYPE "m25p80"
-
-#define M25P80_CS 0
-#define MMC_CS 1
-
-#ifdef CONFIG_MTD_PARTITIONS
-static struct mtd_partition stm25p_partitions[] = {
- /* sflash */
- [0] = {
- .name = "stm25p80",
- .offset = 0x00000000,
- .size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS,
- .mask_flags = 0
- }
-};
-
-#endif
-
-#elif defined(CONFIG_WILDFIREMOD)
-
-#define SPI_NUM_CHIPSELECTS 0x08
-#define SPI_PAR_VAL 0x07 /* Enable DIN, DOUT, CLK */
-#define SPI_CS_MASK 0x78
-
-#define FLASH_BLOCKSIZE (1024*64)
-#define FLASH_NUMBLOCKS 64
-#define FLASH_TYPE "m25p32"
-/* Reserve 1M for the kernel parition */
-#define FLASH_KERNEL_SIZE (1024 * 1024)
-
-#define M25P80_CS 5
-#define MMC_CS 6
-
-#ifdef CONFIG_MTD_PARTITIONS
-static struct mtd_partition stm25p_partitions[] = {
- /* sflash */
- [0] = {
- .name = "kernel",
- .offset = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS - FLASH_KERNEL_SIZE,
- .size = FLASH_KERNEL_SIZE,
- .mask_flags = 0
- },
- [1] = {
- .name = "image",
- .offset = 0x00000000,
- .size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS - FLASH_KERNEL_SIZE,
- .mask_flags = 0
- },
- [2] = {
- .name = "all",
- .offset = 0x00000000,
- .size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS,
- .mask_flags = 0
- }
-};
-#endif
-
-#else
-#define SPI_NUM_CHIPSELECTS 0x04
-#define SPI_PAR_VAL 0x7F /* Enable DIN, DOUT, CLK, CS0 - CS4 */
-#endif
-
-#ifdef MMC_CS
-static struct coldfire_spi_chip flash_chip_info = {
- .mode = SPI_MODE_0,
- .bits_per_word = 16,
- .del_cs_to_clk = 17,
- .del_after_trans = 1,
- .void_write_data = 0
-};
-
-static struct coldfire_spi_chip mmc_chip_info = {
- .mode = SPI_MODE_0,
- .bits_per_word = 16,
- .del_cs_to_clk = 17,
- .del_after_trans = 1,
- .void_write_data = 0xFFFF
-};
-#endif
-
-#ifdef M25P80_CS
-static struct flash_platform_data stm25p80_platform_data = {
- .name = "ST M25P80 SPI Flash chip",
-#ifdef CONFIG_MTD_PARTITIONS
- .parts = stm25p_partitions,
- .nr_parts = sizeof(stm25p_partitions) / sizeof(*stm25p_partitions),
-#endif
- .type = FLASH_TYPE
-};
-#endif
-
-static struct spi_board_info spi_board_info[] __initdata = {
-#ifdef M25P80_CS
- {
- .modalias = "m25p80",
- .max_speed_hz = 16000000,
- .bus_num = 1,
- .chip_select = M25P80_CS,
- .platform_data = &stm25p80_platform_data,
- .controller_data = &flash_chip_info
- },
-#endif
-#ifdef MMC_CS
- {
- .modalias = "mmc_spi",
- .max_speed_hz = 16000000,
- .bus_num = 1,
- .chip_select = MMC_CS,
- .controller_data = &mmc_chip_info
- }
-#endif
-};
-
-static struct coldfire_spi_master coldfire_master_info = {
- .bus_num = 1,
- .num_chipselect = SPI_NUM_CHIPSELECTS,
- .irq_source = MCF5282_QSPI_IRQ_SOURCE,
- .irq_vector = MCF5282_QSPI_IRQ_VECTOR,
- .irq_mask = ((0x01 << MCF5282_QSPI_IRQ_SOURCE) | 0x01),
- .irq_lp = 0x2B, /* Level 5 and Priority 3 */
- .par_val = SPI_PAR_VAL,
- .cs_control = coldfire_qspi_cs_control,
-};
-
-static struct resource coldfire_spi_resources[] = {
- [0] = {
- .name = "qspi-par",
- .start = MCF5282_QSPI_PAR,
- .end = MCF5282_QSPI_PAR,
- .flags = IORESOURCE_MEM
- },
-
- [1] = {
- .name = "qspi-module",
- .start = MCF5282_QSPI_QMR,
- .end = MCF5282_QSPI_QMR + 0x18,
- .flags = IORESOURCE_MEM
- },
-
- [2] = {
- .name = "qspi-int-level",
- .start = MCF5282_INTC0 + MCFINTC_ICR0 + MCF5282_QSPI_IRQ_SOURCE,
- .end = MCF5282_INTC0 + MCFINTC_ICR0 + MCF5282_QSPI_IRQ_SOURCE,
- .flags = IORESOURCE_MEM
- },
-
- [3] = {
- .name = "qspi-int-mask",
- .start = MCF5282_INTC0 + MCFINTC_IMRL,
- .end = MCF5282_INTC0 + MCFINTC_IMRL,
- .flags = IORESOURCE_MEM
- }
-};
-
-static struct platform_device coldfire_spi = {
- .name = "spi_coldfire",
- .id = -1,
- .resource = coldfire_spi_resources,
- .num_resources = ARRAY_SIZE(coldfire_spi_resources),
- .dev = {
- .platform_data = &coldfire_master_info,
- }
-};
-
-static void coldfire_qspi_cs_control(u8 cs, u8 command)
-{
- u8 cs_bit = ((0x01 << cs) << 3) & SPI_CS_MASK;
-
-#if defined(CONFIG_WILDFIRE)
- u8 cs_mask = ~(((0x01 << cs) << 3) & SPI_CS_MASK);
-#endif
-#if defined(CONFIG_WILDFIREMOD)
- u8 cs_mask = (cs << 3) & SPI_CS_MASK;
-#endif
-
- /*
- * Don't do anything if the chip select is not
- * one of the port qs pins.
- */
- if (command & QSPI_CS_INIT) {
-#if defined(CONFIG_WILDFIRE)
- MCF5282_GPIO_DDRQS |= cs_bit;
- MCF5282_GPIO_PQSPAR &= ~cs_bit;
-#endif
-
-#if defined(CONFIG_WILDFIREMOD)
- MCF5282_GPIO_DDRQS |= SPI_CS_MASK;
- MCF5282_GPIO_PQSPAR &= ~SPI_CS_MASK;
-#endif
- }
-
- if (command & QSPI_CS_ASSERT) {
- MCF5282_GPIO_PORTQS &= ~SPI_CS_MASK;
- MCF5282_GPIO_PORTQS |= cs_mask;
- } else if (command & QSPI_CS_DROP) {
- MCF5282_GPIO_PORTQS |= SPI_CS_MASK;
- }
-}
-
-static int __init spi_dev_init(void)
-{
- int retval;
-
- retval = platform_device_register(&coldfire_spi);
- if (retval < 0)
- return retval;
-
- if (ARRAY_SIZE(spi_board_info))
- retval = spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-
- return retval;
-}
-
-#endif /* CONFIG_SPI */
/***************************************************************************/
/*
* Architecture specific compatibility types
*/
+#include <linux/seccomp.h>
+#include <linux/thread_info.h>
#include <linux/types.h>
#include <asm/page.h>
#include <asm/ptrace.h>
compat_ulong_t __unused2;
};
+static inline int is_compat_task(void)
+{
+ return test_thread_flag(TIF_32BIT);
+}
+
#endif /* _ASM_COMPAT_H */
#ifndef __ASM_SECCOMP_H
-#include <linux/thread_info.h>
#include <linux/unistd.h>
#define __NR_seccomp_read __NR_read
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:29 2009
+# Linux kernel version: 2.6.29-rc6
+# Fri Mar 6 00:07:38 2009
#
# CONFIG_PPC64 is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
#
# Networking options
#
-# CONFIG_NET_NS is not set
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_OF_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=m
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:46 2009
+# Linux kernel version: 2.6.29-rc6
+# Fri Mar 6 00:09:08 2009
#
# CONFIG_PPC64 is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_OF_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_EXPORTFS=m
#
# Partition Types
compat_ulong_t __unused6;
};
+static inline int is_compat_task(void)
+{
+ return test_thread_flag(TIF_32BIT);
+}
+
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_COMPAT_H */
#ifndef _ASM_POWERPC_SECCOMP_H
#define _ASM_POWERPC_SECCOMP_H
-#ifdef __KERNEL__
-#include <linux/thread_info.h>
-#endif
-
#include <linux/unistd.h>
#define __NR_seccomp_read __NR_read
{
unsigned int val;
+ /* Do not do the fixup on other platforms! */
+ if (!machine_is(gef_sbc610))
+ return;
+
printk(KERN_INFO "Running NEC uPD720101 Fixup\n");
/* Ensure ports 1, 2, 3, 4 & 5 are enabled */
#include <linux/kernel.h>
#include <linux/initrd.h>
-#include <linux/mtd/physmap.h>
#include <linux/of_platform.h>
#include <asm/time.h>
#include "mpc10x.h"
-static struct mtd_partition linkstation_physmap_partitions[] = {
- {
- .name = "mtd_firmimg",
- .offset = 0x000000,
- .size = 0x300000,
- },
- {
- .name = "mtd_bootcode",
- .offset = 0x300000,
- .size = 0x070000,
- },
- {
- .name = "mtd_status",
- .offset = 0x370000,
- .size = 0x010000,
- },
- {
- .name = "mtd_conf",
- .offset = 0x380000,
- .size = 0x080000,
- },
- {
- .name = "mtd_allflash",
- .offset = 0x000000,
- .size = 0x400000,
- },
- {
- .name = "mtd_data",
- .offset = 0x310000,
- .size = 0x0f0000,
- },
-};
-
static __initdata struct of_device_id of_bus_ids[] = {
{ .type = "soc", },
{ .compatible = "simple-bus", },
static void __init linkstation_setup_arch(void)
{
struct device_node *np;
-#ifdef CONFIG_MTD_PHYSMAP
- physmap_set_partitions(linkstation_physmap_partitions,
- ARRAY_SIZE(linkstation_physmap_partitions));
-#endif
/* Lookup PCI host bridges */
for_each_compatible_node(np, "pci", "mpc10x-pci")
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/initrd.h>
-#include <linux/mtd/physmap.h>
#include <linux/of_platform.h>
#include <asm/system.h>
#include "mpc10x.h"
-#ifdef CONFIG_MTD_PHYSMAP
-static struct mtd_partition storcenter_physmap_partitions[] = {
- {
- .name = "kernel",
- .offset = 0x000000,
- .size = 0x170000,
- },
- {
- .name = "rootfs",
- .offset = 0x170000,
- .size = 0x590000,
- },
- {
- .name = "uboot",
- .offset = 0x700000,
- .size = 0x040000,
- },
- {
- .name = "config",
- .offset = 0x740000,
- .size = 0x0c0000,
- },
-};
-#endif
-
-
static __initdata struct of_device_id storcenter_of_bus[] = {
{ .name = "soc", },
{},
{
struct device_node *np;
-#ifdef CONFIG_MTD_PHYSMAP
- physmap_set_partitions(storcenter_physmap_partitions,
- ARRAY_SIZE(storcenter_physmap_partitions));
-#endif
-
/* Lookup PCI host bridges */
for_each_compatible_node(np, "pci", "mpc10x-pci")
storcenter_add_bridge(np);
module_init(aes_s390_init);
module_exit(aes_s390_fini);
-MODULE_ALIAS("aes");
+MODULE_ALIAS("aes-all");
MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm");
MODULE_LICENSE("GPL");
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_gpio.h>
+#include <media/soc_camera.h>
#include <media/soc_camera_platform.h>
#include <media/sh_mobile_ceu.h>
#include <video/sh_mobile_lcdc.h>
unsigned int __unused2;
};
+static inline int is_compat_task(void)
+{
+ return test_thread_flag(TIF_32BIT);
+}
+
#endif /* _ASM_SPARC64_COMPAT_H */
#ifndef _ASM_SECCOMP_H
-#include <linux/thread_info.h> /* already defines TIF_32BIT */
-
-#ifndef TIF_32BIT
-#error "unexpected TIF_32BIT on sparc64"
-#endif
-
#include <linux/unistd.h>
#define __NR_seccomp_read __NR_read
#else /* !CONFIG_X86_32 */
-#define MAX_EFI_IO_PAGES 100
-
extern u64 efi_call0(void *fp);
extern u64 efi_call1(void *fp, u64 arg1);
extern u64 efi_call2(void *fp, u64 arg1, u64 arg2);
#include <asm/apicdef.h>
#include <asm/page.h>
#include <asm/vsyscall.h>
-#include <asm/efi.h>
/*
* Here we define all the compile-time 'special' virtual
FIX_APIC_BASE, /* local (CPU) APIC) -- required for SMP or not */
FIX_IO_APIC_BASE_0,
FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS - 1,
- FIX_EFI_IO_MAP_LAST_PAGE,
- FIX_EFI_IO_MAP_FIRST_PAGE = FIX_EFI_IO_MAP_LAST_PAGE
- + MAX_EFI_IO_PAGES - 1,
#ifdef CONFIG_PARAVIRT
FIX_PARAVIRT_BOOTMAP,
#endif
#else /* CONFIG_X86_32 */
-extern void finit(void);
+#ifdef CONFIG_MATH_EMULATION
+extern void finit_task(struct task_struct *tsk);
+#else
+static inline void finit_task(struct task_struct *tsk)
+{
+}
+#endif
static inline void tolerant_fwait(void)
{
#ifndef _ASM_X86_SECCOMP_32_H
#define _ASM_X86_SECCOMP_32_H
-#include <linux/thread_info.h>
-
-#ifdef TIF_32BIT
-#error "unexpected TIF_32BIT on i386"
-#endif
-
#include <linux/unistd.h>
#define __NR_seccomp_read __NR_read
#ifndef _ASM_X86_SECCOMP_64_H
#define _ASM_X86_SECCOMP_64_H
-#include <linux/thread_info.h>
-
-#ifdef TIF_32BIT
-#error "unexpected TIF_32BIT on x86_64"
-#else
-#define TIF_32BIT TIF_IA32
-#endif
-
#include <linux/unistd.h>
#include <asm/ia32_unistd.h>
.name = "p4-clockmod",
.owner = THIS_MODULE,
.attr = p4clockmod_attr,
- .hide_interface = 1,
};
spin_unlock_irqrestore(&ds_lock, irq);
- ds_write_config(tracer->ds.context, &tracer->trace.ds, ds_bts);
+ ds_write_config(tracer->ds.context, &tracer->trace.ds, ds_pebs);
ds_resume_pebs(tracer);
return tracer;
void ds_exit_thread(struct task_struct *tsk)
{
- WARN_ON(tsk->thread.ds_ctx);
}
efi_memory_desc_t *md;
efi_status_t status;
unsigned long size;
- u64 end, systab, addr, npages;
+ u64 end, systab, addr, npages, end_pfn;
void *p, *va;
efi.systab = NULL;
size = md->num_pages << EFI_PAGE_SHIFT;
end = md->phys_addr + size;
- if (PFN_UP(end) <= max_low_pfn_mapped)
+ end_pfn = PFN_UP(end);
+ if (end_pfn <= max_low_pfn_mapped
+ || (end_pfn > (1UL << (32 - PAGE_SHIFT))
+ && end_pfn <= max_pfn_mapped))
va = __va(md->phys_addr);
else
va = efi_ioremap(md->phys_addr, size);
void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size)
{
- static unsigned pages_mapped __initdata;
- unsigned i, pages;
- unsigned long offset;
+ unsigned long last_map_pfn;
- pages = PFN_UP(phys_addr + size) - PFN_DOWN(phys_addr);
- offset = phys_addr & ~PAGE_MASK;
- phys_addr &= PAGE_MASK;
-
- if (pages_mapped + pages > MAX_EFI_IO_PAGES)
+ last_map_pfn = init_memory_mapping(phys_addr, phys_addr + size);
+ if ((last_map_pfn << PAGE_SHIFT) < phys_addr + size)
return NULL;
- for (i = 0; i < pages; i++) {
- __set_fixmap(FIX_EFI_IO_MAP_FIRST_PAGE - pages_mapped,
- phys_addr, PAGE_KERNEL);
- phys_addr += PAGE_SIZE;
- pages_mapped++;
- }
-
- return (void __iomem *)__fix_to_virt(FIX_EFI_IO_MAP_FIRST_PAGE - \
- (pages_mapped - pages)) + offset;
+ return (void __iomem *)__va(phys_addr);
}
#ifdef CONFIG_X86_32
if (!HAVE_HWFP) {
memset(tsk->thread.xstate, 0, xstate_size);
- finit();
+ finit_task(tsk);
set_stopped_child_used_math(tsk);
return 0;
}
#ifdef CONFIG_X86_32
# define IS_IA32 1
#elif defined CONFIG_IA32_EMULATION
-# define IS_IA32 test_thread_flag(TIF_IA32)
+# define IS_IA32 is_compat_task()
#else
# define IS_IA32 0
#endif
DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq"),
},
},
+ { /* Handle problems with rebooting on Dell XPS710 */
+ .callback = set_bios_reboot,
+ .ident = "Dell XPS710",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Dell XPS710"),
+ },
+ },
{ }
};
finish_e820_parsing();
+ if (efi_enabled)
+ efi_init();
+
dmi_scan_machine();
dmi_check_system(bad_bios_dmi_table);
insert_resource(&iomem_resource, &data_resource);
insert_resource(&iomem_resource, &bss_resource);
- if (efi_enabled)
- efi_init();
#ifdef CONFIG_X86_32
if (ppro_with_ram_bug()) {
* flush_tlb_user() for both user and kernel mappings unless
* the Page Global Enable (PGE) feature bit is set. */
*dx |= 0x00002000;
+ /* We also lie, and say we're family id 5. 6 or greater
+ * leads to a rdmsr in early_init_intel which we can't handle.
+ * Family ID is returned as bits 8-12 in ax. */
+ *ax &= 0xFFFFF0FF;
+ *ax |= 0x00000500;
break;
case 0x80000000:
/* Futureproof this a little: if they ask how much extended
/* Some systems map "vectors" to interrupts weirdly. Lguest has
* a straightforward 1 to 1 mapping, so force that here. */
__get_cpu_var(vector_irq)[vector] = i;
- if (vector != SYSCALL_VECTOR) {
- set_intr_gate(vector,
- interrupt[vector-FIRST_EXTERNAL_VECTOR]);
- set_irq_chip_and_handler_name(i, &lguest_irq_controller,
- handle_level_irq,
- "level");
- }
+ if (vector != SYSCALL_VECTOR)
+ set_intr_gate(vector, interrupt[i]);
}
/* This call is required to set up for 4k stacks, where we have
* separate stacks for hard and soft interrupts. */
irq_ctx_init(smp_processor_id());
}
+void lguest_setup_irq(unsigned int irq)
+{
+ irq_to_desc_alloc_cpu(irq, 0);
+ set_irq_chip_and_handler_name(irq, &lguest_irq_controller,
+ handle_level_irq, "level");
+}
+
/*
* Time.
*
}
/* Needs to be externally visible */
-void finit(void)
+void finit_task(struct task_struct *tsk)
{
- control_word = 0x037f;
- partial_status = 0;
- top = 0; /* We don't keep top in the status word internally. */
- fpu_tag_word = 0xffff;
+ struct i387_soft_struct *soft = &tsk->thread.xstate->soft;
+ struct address *oaddr, *iaddr;
+ soft->cwd = 0x037f;
+ soft->swd = 0;
+ soft->ftop = 0; /* We don't keep top in the status word internally. */
+ soft->twd = 0xffff;
/* The behaviour is different from that detailed in
Section 15.1.6 of the Intel manual */
- operand_address.offset = 0;
- operand_address.selector = 0;
- instruction_address.offset = 0;
- instruction_address.selector = 0;
- instruction_address.opcode = 0;
- no_ip_update = 1;
+ oaddr = (struct address *)&soft->foo;
+ oaddr->offset = 0;
+ oaddr->selector = 0;
+ iaddr = (struct address *)&soft->fip;
+ iaddr->offset = 0;
+ iaddr->selector = 0;
+ iaddr->opcode = 0;
+ soft->no_update = 1;
+}
+
+void finit(void)
+{
+ finit_task(current);
}
/*
pos = start_pfn << PAGE_SHIFT;
end_pfn = ((pos + (PMD_SIZE - 1)) >> PMD_SHIFT)
<< (PMD_SHIFT - PAGE_SHIFT);
+ if (end_pfn > (end >> PAGE_SHIFT))
+ end_pfn = end >> PAGE_SHIFT;
if (start_pfn < end_pfn) {
nr_range = save_mr(mr, nr_range, start_pfn, end_pfn, 0);
pos = end_pfn << PAGE_SHIFT;
#include <asm/pat.h>
#include <linux/module.h>
-#ifdef CONFIG_X86_PAE
-int
-is_io_mapping_possible(resource_size_t base, unsigned long size)
-{
- return 1;
-}
-#else
-int
-is_io_mapping_possible(resource_size_t base, unsigned long size)
+int is_io_mapping_possible(resource_size_t base, unsigned long size)
{
+#ifndef CONFIG_X86_PAE
/* There is no way to map greater than 1 << 32 address without PAE */
if (base + size > 0x100000000ULL)
return 0;
-
+#endif
return 1;
}
-#endif
+EXPORT_SYMBOL_GPL(is_io_mapping_possible);
/* Map 'pfn' using fixed map 'type' and protections 'prot'
*/
struct list_head list;
struct kmmio_fault_page *release_next;
unsigned long page; /* location of the fault page */
+ bool old_presence; /* page presence prior to arming */
+ bool armed;
/*
* Number of times this page has been registered as a part
* of a probe. If zero, page is disarmed and this may be freed.
- * Used only by writers (RCU).
+ * Used only by writers (RCU) and post_kmmio_handler().
+ * Protected by kmmio_lock, when linked into kmmio_page_table.
*/
int count;
};
return NULL;
}
-static void set_page_present(unsigned long addr, bool present,
- unsigned int *pglevel)
+static void set_pmd_presence(pmd_t *pmd, bool present, bool *old)
+{
+ pmdval_t v = pmd_val(*pmd);
+ *old = !!(v & _PAGE_PRESENT);
+ v &= ~_PAGE_PRESENT;
+ if (present)
+ v |= _PAGE_PRESENT;
+ set_pmd(pmd, __pmd(v));
+}
+
+static void set_pte_presence(pte_t *pte, bool present, bool *old)
+{
+ pteval_t v = pte_val(*pte);
+ *old = !!(v & _PAGE_PRESENT);
+ v &= ~_PAGE_PRESENT;
+ if (present)
+ v |= _PAGE_PRESENT;
+ set_pte_atomic(pte, __pte(v));
+}
+
+static int set_page_presence(unsigned long addr, bool present, bool *old)
{
- pteval_t pteval;
- pmdval_t pmdval;
unsigned int level;
- pmd_t *pmd;
pte_t *pte = lookup_address(addr, &level);
if (!pte) {
pr_err("kmmio: no pte for page 0x%08lx\n", addr);
- return;
+ return -1;
}
- if (pglevel)
- *pglevel = level;
-
switch (level) {
case PG_LEVEL_2M:
- pmd = (pmd_t *)pte;
- pmdval = pmd_val(*pmd) & ~_PAGE_PRESENT;
- if (present)
- pmdval |= _PAGE_PRESENT;
- set_pmd(pmd, __pmd(pmdval));
+ set_pmd_presence((pmd_t *)pte, present, old);
break;
-
case PG_LEVEL_4K:
- pteval = pte_val(*pte) & ~_PAGE_PRESENT;
- if (present)
- pteval |= _PAGE_PRESENT;
- set_pte_atomic(pte, __pte(pteval));
+ set_pte_presence(pte, present, old);
break;
-
default:
pr_err("kmmio: unexpected page level 0x%x.\n", level);
- return;
+ return -1;
}
__flush_tlb_one(addr);
+ return 0;
}
-/** Mark the given page as not present. Access to it will trigger a fault. */
-static void arm_kmmio_fault_page(unsigned long page, unsigned int *pglevel)
+/*
+ * Mark the given page as not present. Access to it will trigger a fault.
+ *
+ * Struct kmmio_fault_page is protected by RCU and kmmio_lock, but the
+ * protection is ignored here. RCU read lock is assumed held, so the struct
+ * will not disappear unexpectedly. Furthermore, the caller must guarantee,
+ * that double arming the same virtual address (page) cannot occur.
+ *
+ * Double disarming on the other hand is allowed, and may occur when a fault
+ * and mmiotrace shutdown happen simultaneously.
+ */
+static int arm_kmmio_fault_page(struct kmmio_fault_page *f)
{
- set_page_present(page & PAGE_MASK, false, pglevel);
+ int ret;
+ WARN_ONCE(f->armed, KERN_ERR "kmmio page already armed.\n");
+ if (f->armed) {
+ pr_warning("kmmio double-arm: page 0x%08lx, ref %d, old %d\n",
+ f->page, f->count, f->old_presence);
+ }
+ ret = set_page_presence(f->page, false, &f->old_presence);
+ WARN_ONCE(ret < 0, KERN_ERR "kmmio arming 0x%08lx failed.\n", f->page);
+ f->armed = true;
+ return ret;
}
-/** Mark the given page as present. */
-static void disarm_kmmio_fault_page(unsigned long page, unsigned int *pglevel)
+/** Restore the given page to saved presence state. */
+static void disarm_kmmio_fault_page(struct kmmio_fault_page *f)
{
- set_page_present(page & PAGE_MASK, true, pglevel);
+ bool tmp;
+ int ret = set_page_presence(f->page, f->old_presence, &tmp);
+ WARN_ONCE(ret < 0,
+ KERN_ERR "kmmio disarming 0x%08lx failed.\n", f->page);
+ f->armed = false;
}
/*
ctx = &get_cpu_var(kmmio_ctx);
if (ctx->active) {
- disarm_kmmio_fault_page(faultpage->page, NULL);
if (addr == ctx->addr) {
/*
- * On SMP we sometimes get recursive probe hits on the
- * same address. Context is already saved, fall out.
+ * A second fault on the same page means some other
+ * condition needs handling by do_page_fault(), the
+ * page really not being present is the most common.
*/
- pr_debug("kmmio: duplicate probe hit on CPU %d, for "
- "address 0x%08lx.\n",
- smp_processor_id(), addr);
- ret = 1;
- goto no_kmmio_ctx;
- }
- /*
- * Prevent overwriting already in-flight context.
- * This should not happen, let's hope disarming at least
- * prevents a panic.
- */
- pr_emerg("kmmio: recursive probe hit on CPU %d, "
+ pr_debug("kmmio: secondary hit for 0x%08lx CPU %d.\n",
+ addr, smp_processor_id());
+
+ if (!faultpage->old_presence)
+ pr_info("kmmio: unexpected secondary hit for "
+ "address 0x%08lx on CPU %d.\n", addr,
+ smp_processor_id());
+ } else {
+ /*
+ * Prevent overwriting already in-flight context.
+ * This should not happen, let's hope disarming at
+ * least prevents a panic.
+ */
+ pr_emerg("kmmio: recursive probe hit on CPU %d, "
"for address 0x%08lx. Ignoring.\n",
smp_processor_id(), addr);
- pr_emerg("kmmio: previous hit was at 0x%08lx.\n",
- ctx->addr);
+ pr_emerg("kmmio: previous hit was at 0x%08lx.\n",
+ ctx->addr);
+ disarm_kmmio_fault_page(faultpage);
+ }
goto no_kmmio_ctx;
}
ctx->active++;
regs->flags &= ~X86_EFLAGS_IF;
/* Now we set present bit in PTE and single step. */
- disarm_kmmio_fault_page(ctx->fpage->page, NULL);
+ disarm_kmmio_fault_page(ctx->fpage);
/*
* If another cpu accesses the same page while we are stepping,
struct kmmio_context *ctx = &get_cpu_var(kmmio_ctx);
if (!ctx->active) {
- pr_debug("kmmio: spurious debug trap on CPU %d.\n",
+ pr_warning("kmmio: spurious debug trap on CPU %d.\n",
smp_processor_id());
goto out;
}
if (ctx->probe && ctx->probe->post_handler)
ctx->probe->post_handler(ctx->probe, condition, regs);
- arm_kmmio_fault_page(ctx->fpage->page, NULL);
+ /* Prevent racing against release_kmmio_fault_page(). */
+ spin_lock(&kmmio_lock);
+ if (ctx->fpage->count)
+ arm_kmmio_fault_page(ctx->fpage);
+ spin_unlock(&kmmio_lock);
regs->flags &= ~X86_EFLAGS_TF;
regs->flags |= ctx->saved_flags;
f = get_kmmio_fault_page(page);
if (f) {
if (!f->count)
- arm_kmmio_fault_page(f->page, NULL);
+ arm_kmmio_fault_page(f);
f->count++;
return 0;
}
- f = kmalloc(sizeof(*f), GFP_ATOMIC);
+ f = kzalloc(sizeof(*f), GFP_ATOMIC);
if (!f)
return -1;
f->count = 1;
f->page = page;
- list_add_rcu(&f->list, kmmio_page_list(f->page));
- arm_kmmio_fault_page(f->page, NULL);
+ if (arm_kmmio_fault_page(f)) {
+ kfree(f);
+ return -1;
+ }
+
+ list_add_rcu(&f->list, kmmio_page_list(f->page));
return 0;
}
f->count--;
BUG_ON(f->count < 0);
if (!f->count) {
- disarm_kmmio_fault_page(f->page, NULL);
+ disarm_kmmio_fault_page(f);
f->release_next = *release_list;
*release_list = f;
}
static void remove_kmmio_fault_pages(struct rcu_head *head)
{
- struct kmmio_delayed_release *dr = container_of(
- head,
- struct kmmio_delayed_release,
- rcu);
+ struct kmmio_delayed_release *dr =
+ container_of(head, struct kmmio_delayed_release, rcu);
struct kmmio_fault_page *p = dr->release_list;
struct kmmio_fault_page **prevp = &dr->release_list;
unsigned long flags;
+
spin_lock_irqsave(&kmmio_lock, flags);
while (p) {
- if (!p->count)
+ if (!p->count) {
list_del_rcu(&p->list);
- else
+ prevp = &p->release_next;
+ } else {
*prevp = p->release_next;
- prevp = &p->release_next;
+ }
p = p->release_next;
}
spin_unlock_irqrestore(&kmmio_lock, flags);
+
/* This is the real RCU destroy call. */
call_rcu(&dr->rcu, rcu_free_kmmio_fault_pages);
}
* primary protection behavior:
*/
__set_pmd_pte(kpte, address, mk_pte(base, __pgprot(_KERNPG_TABLE)));
+
+ /*
+ * Intel Atom errata AAH41 workaround.
+ *
+ * The real fix should be in hw or in a microcode update, but
+ * we also probabilistically try to reduce the window of having
+ * a large TLB mixed with 4K TLBs while instruction fetches are
+ * going on.
+ */
+ __flush_tlb_all();
+
base = NULL;
out_unlock:
#include <linux/bootmem.h>
#include <linux/debugfs.h>
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/gfp.h>
#include <linux/mm.h>
#include <linux/fs.h>
else
return pgprot_noncached(prot);
}
+EXPORT_SYMBOL_GPL(pgprot_writecombine);
#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_X86_PAT)
/*
- * Written by Pekka Paalanen, 2008 <pq@iki.fi>
+ * Written by Pekka Paalanen, 2008
-2009 <pq@iki.fi>
*/
#include <linux/module.h>
#include <linux/io.h>
static unsigned long mmio_address;
module_param(mmio_address, ulong, 0);
-MODULE_PARM_DESC(mmio_address, "Start address of the mapping of 16 kB.");
+MODULE_PARM_DESC(mmio_address, " Start address of the mapping of 16 kB "
+ "(or 8 MB if read_far is non-zero).");
+
+static unsigned long read_far = 0x400100;
+module_param(read_far, ulong, 0);
+MODULE_PARM_DESC(read_far, " Offset of a 32-bit read within 8 MB "
+ "(default: 0x400100).");
+
+static unsigned v16(unsigned i)
+{
+ return i * 12 + 7;
+}
+
+static unsigned v32(unsigned i)
+{
+ return i * 212371 + 13;
+}
static void do_write_test(void __iomem *p)
{
unsigned int i;
+ pr_info(MODULE_NAME ": write test.\n");
mmiotrace_printk("Write test.\n");
+
for (i = 0; i < 256; i++)
iowrite8(i, p + i);
+
for (i = 1024; i < (5 * 1024); i += 2)
- iowrite16(i * 12 + 7, p + i);
+ iowrite16(v16(i), p + i);
+
for (i = (5 * 1024); i < (16 * 1024); i += 4)
- iowrite32(i * 212371 + 13, p + i);
+ iowrite32(v32(i), p + i);
}
static void do_read_test(void __iomem *p)
{
unsigned int i;
+ unsigned errs[3] = { 0 };
+ pr_info(MODULE_NAME ": read test.\n");
mmiotrace_printk("Read test.\n");
+
for (i = 0; i < 256; i++)
- ioread8(p + i);
+ if (ioread8(p + i) != i)
+ ++errs[0];
+
for (i = 1024; i < (5 * 1024); i += 2)
- ioread16(p + i);
+ if (ioread16(p + i) != v16(i))
+ ++errs[1];
+
for (i = (5 * 1024); i < (16 * 1024); i += 4)
- ioread32(p + i);
+ if (ioread32(p + i) != v32(i))
+ ++errs[2];
+
+ mmiotrace_printk("Read errors: 8-bit %d, 16-bit %d, 32-bit %d.\n",
+ errs[0], errs[1], errs[2]);
}
-static void do_test(void)
+static void do_read_far_test(void __iomem *p)
{
- void __iomem *p = ioremap_nocache(mmio_address, 0x4000);
+ pr_info(MODULE_NAME ": read far test.\n");
+ mmiotrace_printk("Read far test.\n");
+
+ ioread32(p + read_far);
+}
+
+static void do_test(unsigned long size)
+{
+ void __iomem *p = ioremap_nocache(mmio_address, size);
if (!p) {
pr_err(MODULE_NAME ": could not ioremap, aborting.\n");
return;
mmiotrace_printk("ioremap returned %p.\n", p);
do_write_test(p);
do_read_test(p);
+ if (read_far && read_far < size - 4)
+ do_read_far_test(p);
iounmap(p);
}
static int __init init(void)
{
+ unsigned long size = (read_far) ? (8 << 20) : (16 << 10);
+
if (mmio_address == 0) {
pr_err(MODULE_NAME ": you have to use the module argument "
"mmio_address.\n");
return -ENXIO;
}
- pr_warning(MODULE_NAME ": WARNING: mapping 16 kB @ 0x%08lx "
- "in PCI address space, and writing "
- "rubbish in there.\n", mmio_address);
- do_test();
+ pr_warning(MODULE_NAME ": WARNING: mapping %lu kB @ 0x%08lx in PCI "
+ "address space, and writing 16 kB of rubbish in there.\n",
+ size >> 10, mmio_address);
+ do_test(size);
+ pr_info(MODULE_NAME ": All done.\n");
return 0;
}
if (cpu_has_arch_perfmon) {
union cpuid10_eax eax;
eax.full = cpuid_eax(0xa);
- if (counter_width < eax.split.bit_width)
- counter_width = eax.split.bit_width;
+
+ /*
+ * For Core2 (family 6, model 15), don't reset the
+ * counter width:
+ */
+ if (!(eax.split.version_id == 0 &&
+ current_cpu_data.x86 == 6 &&
+ current_cpu_data.x86_model == 15)) {
+
+ if (counter_width < eax.split.bit_width)
+ counter_width = eax.split.bit_width;
+ }
}
/* clear all counters */
help
Can we use information of configuration file?
-config HIGHMEM
- bool "High memory support"
-
endmenu
menu "Platform options"
#include <asm/setup.h>
#include <asm/param.h>
+#include <platform/hardware.h>
+
#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
struct screen_info screen_info = { 0, 24, 0, 0, 0, 80, 0, 0, 0, 24, 1, 16};
#endif
#include <linux/stringify.h>
#include <linux/kallsyms.h>
#include <linux/delay.h>
+#include <linux/hardirq.h>
#include <asm/ptrace.h>
#include <asm/timex.h>
#include <linux/mm.h>
#include <linux/module.h>
+#include <linux/hardirq.h>
#include <asm/mmu_context.h>
#include <asm/cacheflush.h>
#include <asm/hardirq.h>
}
-static void rs_put_char(struct tty_struct *tty, unsigned char ch)
+static int rs_put_char(struct tty_struct *tty, unsigned char ch)
{
char buf[2];
- if (!tty)
- return;
-
buf[0] = ch;
buf[1] = '\0'; /* Is this NULL necessary? */
__simc (SYS_write, 1, (unsigned long) buf, 1, 0, 0);
+ return 1;
}
static void rs_flush_chars(struct tty_struct *tty)
}
static unsigned int __blk_recalc_rq_segments(struct request_queue *q,
- struct bio *bio,
- unsigned int *seg_size_ptr)
+ struct bio *bio)
{
unsigned int phys_size;
struct bio_vec *bv, *bvprv = NULL;
int cluster, i, high, highprv = 1;
unsigned int seg_size, nr_phys_segs;
- struct bio *fbio;
+ struct bio *fbio, *bbio;
if (!bio)
return 0;
seg_size = bv->bv_len;
highprv = high;
}
+ bbio = bio;
}
- if (seg_size_ptr)
- *seg_size_ptr = seg_size;
+ if (nr_phys_segs == 1 && seg_size > fbio->bi_seg_front_size)
+ fbio->bi_seg_front_size = seg_size;
+ if (seg_size > bbio->bi_seg_back_size)
+ bbio->bi_seg_back_size = seg_size;
return nr_phys_segs;
}
void blk_recalc_rq_segments(struct request *rq)
{
- unsigned int seg_size = 0, phys_segs;
-
- phys_segs = __blk_recalc_rq_segments(rq->q, rq->bio, &seg_size);
-
- if (phys_segs == 1 && seg_size > rq->bio->bi_seg_front_size)
- rq->bio->bi_seg_front_size = seg_size;
- if (seg_size > rq->biotail->bi_seg_back_size)
- rq->biotail->bi_seg_back_size = seg_size;
-
- rq->nr_phys_segments = phys_segs;
+ rq->nr_phys_segments = __blk_recalc_rq_segments(rq->q, rq->bio);
}
void blk_recount_segments(struct request_queue *q, struct bio *bio)
struct bio *nxt = bio->bi_next;
bio->bi_next = NULL;
- bio->bi_phys_segments = __blk_recalc_rq_segments(q, bio, NULL);
+ bio->bi_phys_segments = __blk_recalc_rq_segments(q, bio);
bio->bi_next = nxt;
bio->bi_flags |= (1 << BIO_SEG_VALID);
}
mask &= ~(CRYPTO_ALG_LARVAL | CRYPTO_ALG_DEAD);
type &= mask;
- alg = try_then_request_module(crypto_alg_lookup(name, type, mask),
- name);
+ alg = crypto_alg_lookup(name, type, mask);
+ if (!alg) {
+ char tmp[CRYPTO_MAX_ALG_NAME];
+
+ request_module(name);
+
+ if (!((type ^ CRYPTO_ALG_NEED_FALLBACK) & mask) &&
+ snprintf(tmp, sizeof(tmp), "%s-all", name) < sizeof(tmp))
+ request_module(tmp);
+
+ alg = crypto_alg_lookup(name, type, mask);
+ }
+
if (alg)
return crypto_is_larval(alg) ? crypto_larval_wait(alg) : alg;
{ PCI_VDEVICE(NVIDIA, 0x0abd), board_ahci }, /* MCP79 */
{ PCI_VDEVICE(NVIDIA, 0x0abe), board_ahci }, /* MCP79 */
{ PCI_VDEVICE(NVIDIA, 0x0abf), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0bc8), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bc9), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bca), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bcb), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bcc), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bcd), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bce), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bcf), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bc4), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bc5), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bc6), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bc7), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0d84), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d85), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d86), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d87), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d88), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d89), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8a), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8b), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8c), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8d), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8e), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8f), board_ahci }, /* MCP89 */
/* SiS */
{ PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */
{
if (ata_id_has_lba(id)) {
if (ata_id_has_lba48(id))
- return ata_id_u64(id, 100);
+ return ata_id_u64(id, ATA_ID_LBA_CAPACITY_2);
else
- return ata_id_u32(id, 60);
+ return ata_id_u32(id, ATA_ID_LBA_CAPACITY);
} else {
if (ata_id_current_chs_valid(id))
- return ata_id_u32(id, 57);
+ return id[ATA_ID_CUR_CYLS] * id[ATA_ID_CUR_HEADS] *
+ id[ATA_ID_CUR_SECTORS];
else
- return id[1] * id[3] * id[6];
+ return id[ATA_ID_CYLS] * id[ATA_ID_HEADS] *
+ id[ATA_ID_SECTORS];
}
}
VPRINTK("unmapping %u sg elements\n", qc->n_elem);
if (qc->n_elem)
- dma_unmap_sg(ap->dev, sg, qc->n_elem, dir);
+ dma_unmap_sg(ap->dev, sg, qc->orig_n_elem, dir);
qc->flags &= ~ATA_QCFLAG_DMAMAP;
qc->sg = NULL;
return -1;
DPRINTK("%d sg elements mapped\n", n_elem);
-
+ qc->orig_n_elem = qc->n_elem;
qc->n_elem = n_elem;
qc->flags |= ATA_QCFLAG_DMAMAP;
}
/* prereset() might have cleared ATA_EH_RESET. If so,
- * bang classes and return.
+ * bang classes, thaw and return.
*/
if (reset && !(ehc->i.action & ATA_EH_RESET)) {
ata_for_each_dev(dev, link, ALL)
classes[dev->devno] = ATA_DEV_NONE;
+ if ((ap->pflags & ATA_PFLAG_FROZEN) &&
+ ata_is_host_link(link))
+ ata_eh_thaw_port(ap);
rc = 0;
goto out;
}
int i;
for (i = 0; i < ATA_EH_UA_TRIES; i++) {
- u8 sense_buffer[SCSI_SENSE_BUFFERSIZE];
+ u8 *sense_buffer = dev->link->ap->sector_buf;
u8 sense_key = 0;
unsigned int err_mask;
module_init(nv_init);
module_exit(nv_exit);
module_param_named(adma, adma_enabled, bool, 0444);
-MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: true)");
+MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: false)");
module_param_named(swncq, swncq_enabled, bool, 0444);
MODULE_PARM_DESC(swncq, "Enable use of SWNCQ (Default: true)");
sect_start_pfn = section_nr_to_pfn(mem_blk->phys_index);
sect_end_pfn = sect_start_pfn + PAGES_PER_SECTION - 1;
for (pfn = sect_start_pfn; pfn <= sect_end_pfn; pfn++) {
- unsigned int nid;
+ int nid;
nid = get_nid_for_pfn(pfn);
if (nid < 0)
return;
while (atomic_read(&skb_shinfo(skb)->dataref) != 1 && i-- > 0)
msleep(Sms);
- if (i <= 0) {
+ if (i < 0) {
printk(KERN_ERR
"aoe: %s holds ref: %s\n",
skb->dev ? skb->dev->name : "netif",
if (cciss_hard_reset_controller(pdev) || cciss_reset_msi(pdev))
return -ENODEV;
- /* Some devices (notably the HP Smart Array 5i Controller)
- need a little pause here */
- schedule_timeout_uninterruptible(30*HZ);
-
- /* Now try to get the controller to respond to a no-op */
+ /* Now try to get the controller to respond to a no-op. Some
+ devices (notably the HP Smart Array 5i Controller) need
+ up to 30 seconds to respond. */
for (i=0; i<30; i++) {
if (cciss_noop(pdev) == 0)
break;
struct loop_device *lo = p->lo;
struct page *page = buf->page;
sector_t IV;
- size_t size;
- int ret;
+ int size, ret;
ret = buf->ops->confirm(pipe, buf);
if (unlikely(ret))
break;
case XenbusStateClosing:
+ if (info->gd == NULL)
+ xenbus_dev_fatal(dev, -ENODEV, "gd is NULL");
bd = bdget_disk(info->gd, 0);
if (bd == NULL)
xenbus_dev_fatal(dev, -ENODEV, "bdget failed");
nb_order = (nb_order >> 1) & 7;
pci_read_config_dword(nb, AMD64_GARTAPERTUREBASE, &nb_base);
nb_aper = nb_base << 25;
- if (agp_aperture_valid(nb_aper, (32*1024*1024)<<nb_order)) {
- return 0;
- }
/* Northbridge seems to contain crap. Try the AGP bridge. */
pci_read_config_word(agp, cap+0x14, &apsize);
- if (apsize == 0xffff)
+ if (apsize == 0xffff) {
+ if (agp_aperture_valid(nb_aper, (32*1024*1024)<<nb_order))
+ return 0;
return -1;
+ }
apsize &= 0xfff;
/* Some BIOS use weird encodings not in the AGPv3 table. */
order = nb_order;
}
+ if (nb_order >= order) {
+ if (agp_aperture_valid(nb_aper, (32*1024*1024)<<nb_order))
+ return 0;
+ }
+
dev_info(&agp->dev, "aperture from AGP @ %Lx size %u MB\n",
aper, 32 << order);
if (order < 0 || !agp_aperture_valid(aper, (32*1024*1024)<<order))
break;
}
}
- if (gtt_entries > 0)
+ if (gtt_entries > 0) {
dev_info(&agp_bridge->dev->dev, "detected %dK %s memory\n",
gtt_entries / KB(1), local ? "local" : "stolen");
- else
+ gtt_entries /= KB(4);
+ } else {
dev_info(&agp_bridge->dev->dev,
"no pre-allocated video memory detected\n");
- gtt_entries /= KB(4);
+ gtt_entries = 0;
+ }
intel_private.gtt_entries = gtt_entries;
}
hvcsd->tty = tty;
tty->driver_data = hvcsd;
- /*
- * Set this driver to low latency so that we actually have a chance at
- * catching a throttled TTY after we flip_buffer_push. Otherwise the
- * flush_to_async may not execute until after the kernel_thread has
- * yielded and resumed the next flip_buffer_push resulting in data
- * loss.
- */
- tty->low_latency = 1;
-
memset(&hvcsd->buffer[0], 0x00, HVCS_BUFF_LEN);
/*
hp = &hvsi_ports[line];
tty->driver_data = hp;
- tty->low_latency = 1; /* avoid throttle/tty_flip_buffer_push race */
mb();
if (hp->state == HVSI_FSP_DIED)
.release = cpufreq_sysfs_release,
};
-static struct kobj_type ktype_empty_cpufreq = {
- .sysfs_ops = &sysfs_ops,
- .release = cpufreq_sysfs_release,
-};
-
/**
* cpufreq_add_dev - add a CPU device
memcpy(&new_policy, policy, sizeof(struct cpufreq_policy));
/* prepare interface data */
- if (!cpufreq_driver->hide_interface) {
- ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq,
- &sys_dev->kobj, "cpufreq");
+ ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq, &sys_dev->kobj,
+ "cpufreq");
+ if (ret)
+ goto err_out_driver_exit;
+
+ /* set up files for this cpu device */
+ drv_attr = cpufreq_driver->attr;
+ while ((drv_attr) && (*drv_attr)) {
+ ret = sysfs_create_file(&policy->kobj, &((*drv_attr)->attr));
if (ret)
goto err_out_driver_exit;
-
- /* set up files for this cpu device */
- drv_attr = cpufreq_driver->attr;
- while ((drv_attr) && (*drv_attr)) {
- ret = sysfs_create_file(&policy->kobj,
- &((*drv_attr)->attr));
- if (ret)
- goto err_out_driver_exit;
- drv_attr++;
- }
- if (cpufreq_driver->get) {
- ret = sysfs_create_file(&policy->kobj,
- &cpuinfo_cur_freq.attr);
- if (ret)
- goto err_out_driver_exit;
- }
- if (cpufreq_driver->target) {
- ret = sysfs_create_file(&policy->kobj,
- &scaling_cur_freq.attr);
- if (ret)
- goto err_out_driver_exit;
- }
- } else {
- ret = kobject_init_and_add(&policy->kobj, &ktype_empty_cpufreq,
- &sys_dev->kobj, "cpufreq");
+ drv_attr++;
+ }
+ if (cpufreq_driver->get) {
+ ret = sysfs_create_file(&policy->kobj, &cpuinfo_cur_freq.attr);
+ if (ret)
+ goto err_out_driver_exit;
+ }
+ if (cpufreq_driver->target) {
+ ret = sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr);
if (ret)
goto err_out_driver_exit;
}
if (!ctx_pool) {
goto err;
}
- ret = qmgr_request_queue(SEND_QID, NPE_QLEN_TOTAL, 0, 0);
+ ret = qmgr_request_queue(SEND_QID, NPE_QLEN_TOTAL, 0, 0,
+ "ixp_crypto:out", NULL);
if (ret)
goto err;
- ret = qmgr_request_queue(RECV_QID, NPE_QLEN, 0, 0);
+ ret = qmgr_request_queue(RECV_QID, NPE_QLEN, 0, 0,
+ "ixp_crypto:in", NULL);
if (ret) {
qmgr_release_queue(SEND_QID);
goto err;
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Michal Ludvig");
-MODULE_ALIAS("aes");
+MODULE_ALIAS("aes-all");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Michal Ludvig");
-MODULE_ALIAS("sha1");
-MODULE_ALIAS("sha256");
+MODULE_ALIAS("sha1-all");
+MODULE_ALIAS("sha256-all");
MODULE_ALIAS("sha1-padlock");
MODULE_ALIAS("sha256-padlock");
/*
- * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ * Copyright(c) 2007 - 2009 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
static void __exit dmatest_exit(void)
{
struct dmatest_chan *dtc, *_dtc;
+ struct dma_chan *chan;
list_for_each_entry_safe(dtc, _dtc, &dmatest_channels, node) {
list_del(&dtc->node);
+ chan = dtc->chan;
dmatest_cleanup_channel(dtc);
pr_debug("dmatest: dropped channel %s\n",
- dma_chan_name(dtc->chan));
- dma_release_channel(dtc->chan);
+ dma_chan_name(chan));
+ dma_release_channel(chan);
}
}
module_exit(dmatest_exit);
static void dma_halt(struct fsl_dma_chan *fsl_chan)
{
- int i = 0;
+ int i;
+
DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) | FSL_DMA_MR_CA,
32);
DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) & ~(FSL_DMA_MR_CS
| FSL_DMA_MR_EMS_EN | FSL_DMA_MR_CA), 32);
- while (!dma_is_idle(fsl_chan) && (i++ < 100))
+ for (i = 0; i < 100; i++) {
+ if (dma_is_idle(fsl_chan))
+ break;
udelay(10);
+ }
if (i >= 100 && !dma_is_idle(fsl_chan))
dev_err(fsl_chan->dev, "DMA halt timeout!\n");
}
/*
* Intel I/OAT DMA Linux driver
- * Copyright(c) 2007 Intel Corporation.
+ * Copyright(c) 2007 - 2009 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
/*
* Intel I/OAT DMA Linux driver
- * Copyright(c) 2007 Intel Corporation.
+ * Copyright(c) 2007 - 2009 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
#define DCA_TAG_MAP_MASK 0xDF
+/* expected tag map bytes for I/OAT ver.2 */
+#define DCA2_TAG_MAP_BYTE0 0x80
+#define DCA2_TAG_MAP_BYTE1 0x0
+#define DCA2_TAG_MAP_BYTE2 0x81
+#define DCA2_TAG_MAP_BYTE3 0x82
+#define DCA2_TAG_MAP_BYTE4 0x82
+
+/* verify if tag map matches expected values */
+static inline int dca2_tag_map_valid(u8 *tag_map)
+{
+ return ((tag_map[0] == DCA2_TAG_MAP_BYTE0) &&
+ (tag_map[1] == DCA2_TAG_MAP_BYTE1) &&
+ (tag_map[2] == DCA2_TAG_MAP_BYTE2) &&
+ (tag_map[3] == DCA2_TAG_MAP_BYTE3) &&
+ (tag_map[4] == DCA2_TAG_MAP_BYTE4));
+}
+
/*
* "Legacy" DCA systems do not implement the DCA register set in the
* I/OAT device. Software needs direct support for their tag mappings.
ioatdca->tag_map[i] = 0;
}
+ if (!dca2_tag_map_valid(ioatdca->tag_map)) {
+ dev_err(&pdev->dev, "APICID_TAG_MAP set incorrectly by BIOS, "
+ "disabling DCA\n");
+ free_dca_provider(dca);
+ return NULL;
+ }
+
err = register_dca_provider(dca, &pdev->dev);
if (err) {
free_dca_provider(dca);
/*
* Intel I/OAT DMA Linux driver
- * Copyright(c) 2004 - 2007 Intel Corporation.
+ * Copyright(c) 2004 - 2009 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
ioat_chan->xfercap = xfercap;
ioat_chan->desccount = 0;
INIT_DELAYED_WORK(&ioat_chan->work, ioat_dma_chan_reset_part2);
- if (ioat_chan->device->version != IOAT_VER_1_2) {
- writel(IOAT_DCACTRL_CMPL_WRITE_ENABLE
- | IOAT_DMA_DCA_ANY_CPU,
- ioat_chan->reg_base + IOAT_DCACTRL_OFFSET);
- }
+ if (ioat_chan->device->version == IOAT_VER_2_0)
+ writel(IOAT_DCACTRL_CMPL_WRITE_ENABLE |
+ IOAT_DMA_DCA_ANY_CPU,
+ ioat_chan->reg_base + IOAT_DCACTRL_OFFSET);
+ else if (ioat_chan->device->version == IOAT_VER_3_0)
+ writel(IOAT_DMA_DCA_ANY_CPU,
+ ioat_chan->reg_base + IOAT_DCACTRL_OFFSET);
spin_lock_init(&ioat_chan->cleanup_lock);
spin_lock_init(&ioat_chan->desc_lock);
INIT_LIST_HEAD(&ioat_chan->free_desc);
* up if the client is done with the descriptor
*/
if (async_tx_test_ack(&desc->async_tx)) {
- list_del(&desc->node);
- list_add_tail(&desc->node,
- &ioat_chan->free_desc);
+ list_move_tail(&desc->node,
+ &ioat_chan->free_desc);
} else
desc->async_tx.cookie = 0;
} else {
dma_cookie_t cookie;
int err = 0;
struct completion cmp;
+ unsigned long tmo;
src = kzalloc(sizeof(u8) * IOAT_TEST_SIZE, GFP_KERNEL);
if (!src)
}
device->common.device_issue_pending(dma_chan);
- wait_for_completion_timeout(&cmp, msecs_to_jiffies(3000));
+ tmo = wait_for_completion_timeout(&cmp, msecs_to_jiffies(3000));
- if (device->common.device_is_tx_complete(dma_chan, cookie, NULL, NULL)
+ if (tmo == 0 ||
+ device->common.device_is_tx_complete(dma_chan, cookie, NULL, NULL)
!= DMA_SUCCESS) {
dev_err(&device->pdev->dev,
"Self-test copy timed out, disabling\n");
" %d channels, device version 0x%02x, driver version %s\n",
device->common.chancnt, device->version, IOAT_DMA_VERSION);
+ if (!device->common.chancnt) {
+ dev_err(&device->pdev->dev,
+ "Intel(R) I/OAT DMA Engine problem found: "
+ "zero channels detected\n");
+ goto err_setup_interrupts;
+ }
+
err = ioat_dma_setup_interrupts(device);
if (err)
goto err_setup_interrupts;
struct dma_chan *chan, *_chan;
struct ioat_dma_chan *ioat_chan;
+ if (device->version != IOAT_VER_3_0)
+ cancel_delayed_work(&device->work);
+
ioat_dma_remove_interrupts(device);
dma_async_device_unregister(&device->common);
pci_release_regions(device->pdev);
pci_disable_device(device->pdev);
- if (device->version != IOAT_VER_3_0) {
- cancel_delayed_work(&device->work);
- }
-
list_for_each_entry_safe(chan, _chan,
&device->common.channels, device_node) {
ioat_chan = to_ioat_chan(chan);
/*
- * Copyright(c) 2004 - 2007 Intel Corporation. All rights reserved.
+ * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
#include <linux/pci_ids.h>
#include <net/tcp.h>
-#define IOAT_DMA_VERSION "3.30"
+#define IOAT_DMA_VERSION "3.64"
enum ioat_interrupt {
none = 0,
#ifdef CONFIG_NET_DMA
switch (dev->version) {
case IOAT_VER_1_2:
- case IOAT_VER_3_0:
sysctl_tcp_dma_copybreak = 4096;
break;
case IOAT_VER_2_0:
sysctl_tcp_dma_copybreak = 2048;
break;
+ case IOAT_VER_3_0:
+ sysctl_tcp_dma_copybreak = 262144;
+ break;
}
#endif
}
/*
- * Copyright(c) 2004 - 2007 Intel Corporation. All rights reserved.
+ * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
/*
- * Copyright(c) 2004 - 2007 Intel Corporation. All rights reserved.
+ * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
for (src_idx = 0; src_idx < IOP_ADMA_NUM_SRC_TEST; src_idx++) {
xor_srcs[src_idx] = alloc_page(GFP_KERNEL);
- if (!xor_srcs[src_idx])
- while (src_idx--) {
+ if (!xor_srcs[src_idx]) {
+ while (src_idx--)
__free_page(xor_srcs[src_idx]);
- return -ENOMEM;
- }
+ return -ENOMEM;
+ }
}
dest = alloc_page(GFP_KERNEL);
- if (!dest)
- while (src_idx--) {
+ if (!dest) {
+ while (src_idx--)
__free_page(xor_srcs[src_idx]);
- return -ENOMEM;
- }
+ return -ENOMEM;
+ }
/* Fill in src buffers */
for (src_idx = 0; src_idx < IOP_ADMA_NUM_SRC_TEST; src_idx++) {
static struct platform_driver iop_adma_driver = {
.probe = iop_adma_probe,
- .remove = iop_adma_remove,
+ .remove = __devexit_p(iop_adma_remove),
.driver = {
.owner = THIS_MODULE,
.name = "iop-adma",
ichan->status = IPU_CHANNEL_READY;
- spin_unlock_irqrestore(ipu->lock, flags);
+ spin_unlock_irqrestore(&ipu->lock, flags);
return 0;
}
for (src_idx = 0; src_idx < MV_XOR_NUM_SRC_TEST; src_idx++) {
xor_srcs[src_idx] = alloc_page(GFP_KERNEL);
- if (!xor_srcs[src_idx])
- while (src_idx--) {
+ if (!xor_srcs[src_idx]) {
+ while (src_idx--)
__free_page(xor_srcs[src_idx]);
- return -ENOMEM;
- }
+ return -ENOMEM;
+ }
}
dest = alloc_page(GFP_KERNEL);
- if (!dest)
- while (src_idx--) {
+ if (!dest) {
+ while (src_idx--)
__free_page(xor_srcs[src_idx]);
- return -ENOMEM;
- }
+ return -ENOMEM;
+ }
/* Fill in src buffers */
for (src_idx = 0; src_idx < MV_XOR_NUM_SRC_TEST; src_idx++) {
static struct platform_driver mv_xor_driver = {
.probe = mv_xor_probe,
- .remove = mv_xor_remove,
+ .remove = __devexit_p(mv_xor_remove),
.driver = {
.owner = THIS_MODULE,
.name = MV_XOR_NAME,
dev->sigdata.lock = NULL;
master->lock.hw_lock = NULL; /* SHM removed */
master->lock.file_priv = NULL;
- wake_up_interruptible(&master->lock.lock_queue);
+ wake_up_interruptible_all(&master->lock.lock_queue);
}
break;
case _DRM_AGP:
mutex_lock(&dev->struct_mutex);
if (file_priv->is_master) {
+ struct drm_master *master = file_priv->master;
struct drm_file *temp;
list_for_each_entry(temp, &dev->filelist, lhead) {
if ((temp->master == file_priv->master) &&
temp->authenticated = 0;
}
+ /**
+ * Since the master is disappearing, so is the
+ * possibility to lock.
+ */
+
+ if (master->lock.hw_lock) {
+ if (dev->sigdata.lock == master->lock.hw_lock)
+ dev->sigdata.lock = NULL;
+ master->lock.hw_lock = NULL;
+ master->lock.file_priv = NULL;
+ wake_up_interruptible_all(&master->lock.lock_queue);
+ }
+
if (file_priv->minor->master == file_priv->master) {
/* drop the reference held my the minor */
drm_master_put(&file_priv->minor->master);
__set_current_state(TASK_INTERRUPTIBLE);
if (!master->lock.hw_lock) {
/* Device has been unregistered */
+ send_sig(SIGTERM, current, 0);
ret = -EINTR;
break;
}
/* Contention */
schedule();
if (signal_pending(current)) {
- ret = -ERESTARTSYS;
+ ret = -EINTR;
break;
}
}
drm_ht_remove(&master->magiclist);
- if (master->lock.hw_lock) {
- if (dev->sigdata.lock == master->lock.hw_lock)
- dev->sigdata.lock = NULL;
- master->lock.hw_lock = NULL;
- master->lock.file_priv = NULL;
- wake_up_interruptible(&master->lock.lock_queue);
- }
-
drm_free(master, sizeof(*master), DRM_MEM_DRIVER);
}
file_priv->minor->master != file_priv->master) {
mutex_lock(&dev->struct_mutex);
file_priv->minor->master = drm_master_get(file_priv->master);
- mutex_lock(&dev->struct_mutex);
+ mutex_unlock(&dev->struct_mutex);
}
return 0;
1024 * 1024,
MTRR_TYPE_WRCOMB, 1);
if (dev_priv->mm.gtt_mtrr < 0) {
- DRM_INFO("MTRR allocation failed\n. Graphics "
+ DRM_INFO("MTRR allocation failed. Graphics "
"performance may suffer.\n");
}
u8 saveAR_INDEX;
u8 saveAR[21];
u8 saveDACMASK;
- u8 saveDACDATA[256*3]; /* 256 3-byte colors */
u8 saveCR[37];
struct {
/** for phy allocated objects */
struct drm_i915_gem_phys_object *phys_obj;
+
+ /**
+ * Used for checking the object doesn't appear more than once
+ * in an execbuffer object list.
+ */
+ int in_execbuffer;
};
/**
struct drm_i915_gem_object *obj_priv = obj->driver_private;
int regnum = obj_priv->fence_reg;
int tile_width;
- uint32_t val;
+ uint32_t fence_reg, val;
uint32_t pitch_val;
if ((obj_priv->gtt_offset & ~I915_FENCE_START_MASK) ||
val |= pitch_val << I830_FENCE_PITCH_SHIFT;
val |= I830_FENCE_REG_VALID;
- I915_WRITE(FENCE_REG_830_0 + (regnum * 4), val);
+ if (regnum < 8)
+ fence_reg = FENCE_REG_830_0 + (regnum * 4);
+ else
+ fence_reg = FENCE_REG_945_8 + ((regnum - 8) * 4);
+ I915_WRITE(fence_reg, val);
}
static void i830_write_fence_reg(struct drm_i915_fence_reg *reg)
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_gem_object *obj_priv = obj->driver_private;
struct drm_i915_fence_reg *reg = NULL;
- int i, ret;
+ struct drm_i915_gem_object *old_obj_priv = NULL;
+ int i, ret, avail;
switch (obj_priv->tiling_mode) {
case I915_TILING_NONE:
}
/* First try to find a free reg */
+try_again:
+ avail = 0;
for (i = dev_priv->fence_reg_start; i < dev_priv->num_fence_regs; i++) {
reg = &dev_priv->fence_regs[i];
if (!reg->obj)
break;
+
+ old_obj_priv = reg->obj->driver_private;
+ if (!old_obj_priv->pin_count)
+ avail++;
}
/* None available, try to steal one or wait for a user to finish */
if (i == dev_priv->num_fence_regs) {
- struct drm_i915_gem_object *old_obj_priv = NULL;
+ uint32_t seqno = dev_priv->mm.next_gem_seqno;
loff_t offset;
-try_again:
- /* Could try to use LRU here instead... */
+ if (avail == 0)
+ return -ENOMEM;
+
for (i = dev_priv->fence_reg_start;
i < dev_priv->num_fence_regs; i++) {
+ uint32_t this_seqno;
+
reg = &dev_priv->fence_regs[i];
old_obj_priv = reg->obj->driver_private;
- if (!old_obj_priv->pin_count)
+
+ if (old_obj_priv->pin_count)
+ continue;
+
+ /* i915 uses fences for GPU access to tiled buffers */
+ if (IS_I965G(dev) || !old_obj_priv->active)
break;
+
+ /* find the seqno of the first available fence */
+ this_seqno = old_obj_priv->last_rendering_seqno;
+ if (this_seqno != 0 &&
+ reg->obj->write_domain == 0 &&
+ i915_seqno_passed(seqno, this_seqno))
+ seqno = this_seqno;
}
/*
* objects to finish before trying again.
*/
if (i == dev_priv->num_fence_regs) {
- ret = i915_gem_object_set_to_gtt_domain(reg->obj, 0);
- if (ret) {
- WARN(ret != -ERESTARTSYS,
- "switch to GTT domain failed: %d\n", ret);
- return ret;
+ if (seqno == dev_priv->mm.next_gem_seqno) {
+ i915_gem_flush(dev,
+ I915_GEM_GPU_DOMAINS,
+ I915_GEM_GPU_DOMAINS);
+ seqno = i915_add_request(dev,
+ I915_GEM_GPU_DOMAINS);
+ if (seqno == 0)
+ return -ENOMEM;
}
+
+ ret = i915_wait_request(dev, seqno);
+ if (ret)
+ return ret;
goto try_again;
}
+ BUG_ON(old_obj_priv->active ||
+ (reg->obj->write_domain & I915_GEM_GPU_DOMAINS));
+
/*
* Zap this virtual mapping so we can set up a fence again
* for this object next time we need it.
if (IS_I965G(dev))
I915_WRITE64(FENCE_REG_965_0 + (obj_priv->fence_reg * 8), 0);
- else
- I915_WRITE(FENCE_REG_830_0 + (obj_priv->fence_reg * 4), 0);
+ else {
+ uint32_t fence_reg;
+
+ if (obj_priv->fence_reg < 8)
+ fence_reg = FENCE_REG_830_0 + obj_priv->fence_reg * 4;
+ else
+ fence_reg = FENCE_REG_945_8 + (obj_priv->fence_reg -
+ 8) * 4;
+
+ I915_WRITE(fence_reg, 0);
+ }
dev_priv->fence_regs[obj_priv->fence_reg].obj = NULL;
obj_priv->fence_reg = I915_FENCE_REG_NONE;
struct drm_i915_gem_exec_object *exec_list = NULL;
struct drm_gem_object **object_list = NULL;
struct drm_gem_object *batch_obj;
+ struct drm_i915_gem_object *obj_priv;
int ret, i, pinned = 0;
uint64_t exec_offset;
uint32_t seqno, flush_domains;
ret = -EBADF;
goto err;
}
+
+ obj_priv = object_list[i]->driver_private;
+ if (obj_priv->in_execbuffer) {
+ DRM_ERROR("Object %p appears more than once in object list\n",
+ object_list[i]);
+ ret = -EBADF;
+ goto err;
+ }
+ obj_priv->in_execbuffer = true;
}
/* Pin and relocate */
for (i = 0; i < pinned; i++)
i915_gem_object_unpin(object_list[i]);
- for (i = 0; i < args->buffer_count; i++)
+ for (i = 0; i < args->buffer_count; i++) {
+ if (object_list[i]) {
+ obj_priv = object_list[i]->driver_private;
+ obj_priv->in_execbuffer = false;
+ }
drm_gem_object_unreference(object_list[i]);
+ }
mutex_unlock(&dev->struct_mutex);
ret = i915_gem_object_bind_to_gtt(obj, alignment);
if (ret != 0) {
if (ret != -EBUSY && ret != -ERESTARTSYS)
- DRM_ERROR("Failure to bind: %d", ret);
+ DRM_ERROR("Failure to bind: %d\n", ret);
+ return ret;
+ }
+ }
+ /*
+ * Pre-965 chips need a fence register set up in order to
+ * properly handle tiled surfaces.
+ */
+ if (!IS_I965G(dev) &&
+ obj_priv->fence_reg == I915_FENCE_REG_NONE &&
+ obj_priv->tiling_mode != I915_TILING_NONE) {
+ ret = i915_gem_object_get_fence_reg(obj, true);
+ if (ret != 0) {
+ if (ret != -EBUSY && ret != -ERESTARTSYS)
+ DRM_ERROR("Failure to install fence: %d\n",
+ ret);
return ret;
}
- /*
- * Pre-965 chips need a fence register set up in order to
- * properly handle tiled surfaces.
- */
- if (!IS_I965G(dev) &&
- obj_priv->fence_reg == I915_FENCE_REG_NONE &&
- obj_priv->tiling_mode != I915_TILING_NONE)
- i915_gem_object_get_fence_reg(obj, true);
}
obj_priv->pin_count++;
drm_i915_irq_emit_t *emit = data;
int result;
- RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
-
if (!dev_priv) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
+
+ RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
+
mutex_lock(&dev->struct_mutex);
result = i915_emit_irq(dev);
mutex_unlock(&dev->struct_mutex);
* Fence registers
*/
#define FENCE_REG_830_0 0x2000
+#define FENCE_REG_945_8 0x3000
#define I830_FENCE_START_MASK 0x07f80000
#define I830_FENCE_TILING_Y_SHIFT 12
#define I830_FENCE_SIZE_BITS(size) ((ffs((size) >> 19) - 1) << 8)
/* VGA color palette registers */
dev_priv->saveDACMASK = I915_READ8(VGA_DACMASK);
- /* DACCRX automatically increments during read */
- I915_WRITE8(VGA_DACRX, 0);
- /* Read 3 bytes of color data from each index */
- for (i = 0; i < 256 * 3; i++)
- dev_priv->saveDACDATA[i] = I915_READ8(VGA_DACDATA);
/* MSR bits */
dev_priv->saveMSR = I915_READ8(VGA_MSR_READ);
/* VGA color palette registers */
I915_WRITE8(VGA_DACMASK, dev_priv->saveDACMASK);
- /* DACCRX automatically increments during read */
- I915_WRITE8(VGA_DACWX, 0);
- /* Read 3 bytes of color data from each index */
- for (i = 0; i < 256 * 3; i++)
- I915_WRITE8(VGA_DACDATA, dev_priv->saveDACDATA[i]);
-
}
int i915_save_state(struct drm_device *dev)
#define LM85_COMPANY_SMSC 0x5c
#define LM85_VERSTEP_VMASK 0xf0
#define LM85_VERSTEP_GENERIC 0x60
+#define LM85_VERSTEP_GENERIC2 0x70
#define LM85_VERSTEP_LM85C 0x60
#define LM85_VERSTEP_LM85B 0x62
#define LM85_VERSTEP_ADM1027 0x60
static const struct i2c_device_id lm85_id[] = {
{ "adm1027", adm1027 },
{ "adt7463", adt7463 },
+ { "adt7468", adt7468 },
{ "lm85", any_chip },
{ "lm85b", lm85b },
{ "lm85c", lm85c },
struct lm85_data *data = lm85_update_device(dev);
int vid;
- if (data->type == adt7463 && (data->vid & 0x80)) {
+ if ((data->type == adt7463 || data->type == adt7468) &&
+ (data->vid & 0x80)) {
/* 6-pin VID (VRM 10) */
vid = vid_from_reg(data->vid & 0x3f, data->vrm);
} else {
address, company, verstep);
/* All supported chips have the version in common */
- if ((verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC) {
+ if ((verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC &&
+ (verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC2) {
dev_dbg(&adapter->dev, "Autodetection failed: "
"unsupported version\n");
return -ENODEV;
return 0;
}
-static void __devexit
+static void
mv64xxx_i2c_unmap_regs(struct mv64xxx_i2c_data *drv_data)
{
if (drv_data->reg_base) {
static struct platform_driver mv64xxx_i2c_driver = {
.probe = mv64xxx_i2c_probe,
- .remove = mv64xxx_i2c_remove,
+ .remove = __devexit_p(mv64xxx_i2c_remove),
.driver = {
.owner = THIS_MODULE,
.name = MV64XXX_I2C_CTLR_NAME,
depends on SOC_TX4939
select BLK_DEV_IDEDMA_SFF
+config BLK_DEV_IDE_AT91
+ tristate "Atmel AT91 (SAM9, CAP9, AT572D940HF) IDE support"
+ depends on ARM && ARCH_AT91 && !ARCH_AT91RM9200 && !ARCH_AT91X40
+ select IDE_TIMINGS
+
config IDE_ARM
tristate "ARM IDE support"
depends on ARM && (ARCH_RPC || ARCH_SHARK)
obj-$(CONFIG_BLK_DEV_IDE_TX4938) += tx4938ide.o
obj-$(CONFIG_BLK_DEV_IDE_TX4939) += tx4939ide.o
+obj-$(CONFIG_BLK_DEV_IDE_AT91) += at91_ide.o
--- /dev/null
+/*
+ * IDE host driver for AT91 (SAM9, CAP9, AT572D940HF) Static Memory Controller
+ * with Compact Flash True IDE logic
+ *
+ * Copyright (c) 2008, 2009 Kelvatek Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/ide.h>
+#include <linux/platform_device.h>
+
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9263.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91sam9263_matrix.h>
+
+#define DRV_NAME "at91_ide"
+
+#define perr(fmt, args...) pr_err(DRV_NAME ": " fmt, ##args)
+#define pdbg(fmt, args...) pr_debug("%s " fmt, __func__, ##args)
+
+/*
+ * Access to IDE device is possible through EBI Static Memory Controller
+ * with Compact Flash logic. For details see EBI and SMC datasheet sections
+ * of any microcontroller from AT91SAM9 family.
+ *
+ * Within SMC chip select address space, lines A[23:21] distinguish Compact
+ * Flash modes (I/O, common memory, attribute memory, True IDE). IDE modes are:
+ * 0x00c0000 - True IDE
+ * 0x00e0000 - Alternate True IDE (Alt Status Register)
+ *
+ * On True IDE mode Task File and Data Register are mapped at the same address.
+ * To distinguish access between these two different bus data width is used:
+ * 8Bit for Task File, 16Bit for Data I/O.
+ *
+ * After initialization we do 8/16 bit flipping (changes in SMC MODE register)
+ * only inside IDE callback routines which are serialized by IDE layer,
+ * so no additional locking needed.
+ */
+
+#define TASK_FILE 0x00c00000
+#define ALT_MODE 0x00e00000
+#define REGS_SIZE 8
+
+#define enter_16bit(cs, mode) do { \
+ mode = at91_sys_read(AT91_SMC_MODE(cs)); \
+ at91_sys_write(AT91_SMC_MODE(cs), mode | AT91_SMC_DBW_16); \
+} while (0)
+
+#define leave_16bit(cs, mode) at91_sys_write(AT91_SMC_MODE(cs), mode);
+
+static void set_smc_timings(const u8 chipselect, const u16 cycle,
+ const u16 setup, const u16 pulse,
+ const u16 data_float, int use_iordy)
+{
+ unsigned long mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+ AT91_SMC_BAT_SELECT;
+
+ /* disable or enable waiting for IORDY signal */
+ if (use_iordy)
+ mode |= AT91_SMC_EXNWMODE_READY;
+
+ /* add data float cycles if needed */
+ if (data_float)
+ mode |= AT91_SMC_TDF_(data_float);
+
+ at91_sys_write(AT91_SMC_MODE(chipselect), mode);
+
+ /* setup timings in SMC */
+ at91_sys_write(AT91_SMC_SETUP(chipselect), AT91_SMC_NWESETUP_(setup) |
+ AT91_SMC_NCS_WRSETUP_(0) |
+ AT91_SMC_NRDSETUP_(setup) |
+ AT91_SMC_NCS_RDSETUP_(0));
+ at91_sys_write(AT91_SMC_PULSE(chipselect), AT91_SMC_NWEPULSE_(pulse) |
+ AT91_SMC_NCS_WRPULSE_(cycle) |
+ AT91_SMC_NRDPULSE_(pulse) |
+ AT91_SMC_NCS_RDPULSE_(cycle));
+ at91_sys_write(AT91_SMC_CYCLE(chipselect), AT91_SMC_NWECYCLE_(cycle) |
+ AT91_SMC_NRDCYCLE_(cycle));
+}
+
+static unsigned int calc_mck_cycles(unsigned int ns, unsigned int mck_hz)
+{
+ u64 tmp = ns;
+
+ tmp *= mck_hz;
+ tmp += 1000*1000*1000 - 1; /* round up */
+ do_div(tmp, 1000*1000*1000);
+ return (unsigned int) tmp;
+}
+
+static void apply_timings(const u8 chipselect, const u8 pio,
+ const struct ide_timing *timing, int use_iordy)
+{
+ unsigned int t0, t1, t2, t6z;
+ unsigned int cycle, setup, pulse, data_float;
+ unsigned int mck_hz;
+ struct clk *mck;
+
+ /* see table 22 of Compact Flash standard 4.1 for the meaning,
+ * we do not stretch active (t2) time, so setup (t1) + hold time (th)
+ * assure at least minimal recovery (t2i) time */
+ t0 = timing->cyc8b;
+ t1 = timing->setup;
+ t2 = timing->act8b;
+ t6z = (pio < 5) ? 30 : 20;
+
+ pdbg("t0=%u t1=%u t2=%u t6z=%u\n", t0, t1, t2, t6z);
+
+ mck = clk_get(NULL, "mck");
+ BUG_ON(IS_ERR(mck));
+ mck_hz = clk_get_rate(mck);
+ pdbg("mck_hz=%u\n", mck_hz);
+
+ cycle = calc_mck_cycles(t0, mck_hz);
+ setup = calc_mck_cycles(t1, mck_hz);
+ pulse = calc_mck_cycles(t2, mck_hz);
+ data_float = calc_mck_cycles(t6z, mck_hz);
+
+ pdbg("cycle=%u setup=%u pulse=%u data_float=%u\n",
+ cycle, setup, pulse, data_float);
+
+ set_smc_timings(chipselect, cycle, setup, pulse, data_float, use_iordy);
+}
+
+static void at91_ide_input_data(ide_drive_t *drive, struct request *rq,
+ void *buf, unsigned int len)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ struct ide_io_ports *io_ports = &hwif->io_ports;
+ u8 chipselect = hwif->select_data;
+ unsigned long mode;
+
+ pdbg("cs %u buf %p len %d\n", chipselect, buf, len);
+
+ len++;
+
+ enter_16bit(chipselect, mode);
+ __ide_mm_insw((void __iomem *) io_ports->data_addr, buf, len / 2);
+ leave_16bit(chipselect, mode);
+}
+
+static void at91_ide_output_data(ide_drive_t *drive, struct request *rq,
+ void *buf, unsigned int len)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ struct ide_io_ports *io_ports = &hwif->io_ports;
+ u8 chipselect = hwif->select_data;
+ unsigned long mode;
+
+ pdbg("cs %u buf %p len %d\n", chipselect, buf, len);
+
+ enter_16bit(chipselect, mode);
+ __ide_mm_outsw((void __iomem *) io_ports->data_addr, buf, len / 2);
+ leave_16bit(chipselect, mode);
+}
+
+static u8 ide_mm_inb(unsigned long port)
+{
+ return readb((void __iomem *) port);
+}
+
+static void ide_mm_outb(u8 value, unsigned long port)
+{
+ writeb(value, (void __iomem *) port);
+}
+
+static void at91_ide_tf_load(ide_drive_t *drive, ide_task_t *task)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ struct ide_io_ports *io_ports = &hwif->io_ports;
+ struct ide_taskfile *tf = &task->tf;
+ u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF;
+
+ if (task->tf_flags & IDE_TFLAG_FLAGGED)
+ HIHI = 0xFF;
+
+ if (task->tf_flags & IDE_TFLAG_OUT_DATA) {
+ u16 data = (tf->hob_data << 8) | tf->data;
+
+ at91_ide_output_data(drive, NULL, &data, 2);
+ }
+
+ if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE)
+ ide_mm_outb(tf->hob_feature, io_ports->feature_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT)
+ ide_mm_outb(tf->hob_nsect, io_ports->nsect_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL)
+ ide_mm_outb(tf->hob_lbal, io_ports->lbal_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM)
+ ide_mm_outb(tf->hob_lbam, io_ports->lbam_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH)
+ ide_mm_outb(tf->hob_lbah, io_ports->lbah_addr);
+
+ if (task->tf_flags & IDE_TFLAG_OUT_FEATURE)
+ ide_mm_outb(tf->feature, io_ports->feature_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_NSECT)
+ ide_mm_outb(tf->nsect, io_ports->nsect_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_LBAL)
+ ide_mm_outb(tf->lbal, io_ports->lbal_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_LBAM)
+ ide_mm_outb(tf->lbam, io_ports->lbam_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_LBAH)
+ ide_mm_outb(tf->lbah, io_ports->lbah_addr);
+
+ if (task->tf_flags & IDE_TFLAG_OUT_DEVICE)
+ ide_mm_outb((tf->device & HIHI) | drive->select, io_ports->device_addr);
+}
+
+static void at91_ide_tf_read(ide_drive_t *drive, ide_task_t *task)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ struct ide_io_ports *io_ports = &hwif->io_ports;
+ struct ide_taskfile *tf = &task->tf;
+
+ if (task->tf_flags & IDE_TFLAG_IN_DATA) {
+ u16 data;
+
+ at91_ide_input_data(drive, NULL, &data, 2);
+ tf->data = data & 0xff;
+ tf->hob_data = (data >> 8) & 0xff;
+ }
+
+ /* be sure we're looking at the low order bits */
+ ide_mm_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr);
+
+ if (task->tf_flags & IDE_TFLAG_IN_FEATURE)
+ tf->feature = ide_mm_inb(io_ports->feature_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_NSECT)
+ tf->nsect = ide_mm_inb(io_ports->nsect_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_LBAL)
+ tf->lbal = ide_mm_inb(io_ports->lbal_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_LBAM)
+ tf->lbam = ide_mm_inb(io_ports->lbam_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_LBAH)
+ tf->lbah = ide_mm_inb(io_ports->lbah_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_DEVICE)
+ tf->device = ide_mm_inb(io_ports->device_addr);
+
+ if (task->tf_flags & IDE_TFLAG_LBA48) {
+ ide_mm_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr);
+
+ if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE)
+ tf->hob_feature = ide_mm_inb(io_ports->feature_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
+ tf->hob_nsect = ide_mm_inb(io_ports->nsect_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
+ tf->hob_lbal = ide_mm_inb(io_ports->lbal_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
+ tf->hob_lbam = ide_mm_inb(io_ports->lbam_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
+ tf->hob_lbah = ide_mm_inb(io_ports->lbah_addr);
+ }
+}
+
+static void at91_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
+{
+ struct ide_timing *timing;
+ u8 chipselect = drive->hwif->select_data;
+ int use_iordy = 0;
+
+ pdbg("chipselect %u pio %u\n", chipselect, pio);
+
+ timing = ide_timing_find_mode(XFER_PIO_0 + pio);
+ BUG_ON(!timing);
+
+ if ((pio > 2 || ata_id_has_iordy(drive->id)) &&
+ !(ata_id_is_cfa(drive->id) && pio > 4))
+ use_iordy = 1;
+
+ apply_timings(chipselect, pio, timing, use_iordy);
+}
+
+static const struct ide_tp_ops at91_ide_tp_ops = {
+ .exec_command = ide_exec_command,
+ .read_status = ide_read_status,
+ .read_altstatus = ide_read_altstatus,
+ .set_irq = ide_set_irq,
+
+ .tf_load = at91_ide_tf_load,
+ .tf_read = at91_ide_tf_read,
+
+ .input_data = at91_ide_input_data,
+ .output_data = at91_ide_output_data,
+};
+
+static const struct ide_port_ops at91_ide_port_ops = {
+ .set_pio_mode = at91_ide_set_pio_mode,
+};
+
+static const struct ide_port_info at91_ide_port_info __initdata = {
+ .port_ops = &at91_ide_port_ops,
+ .tp_ops = &at91_ide_tp_ops,
+ .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA | IDE_HFLAG_SINGLE |
+ IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_UNMASK_IRQS,
+ .pio_mask = ATA_PIO5,
+};
+
+/*
+ * If interrupt is delivered through GPIO, IRQ are triggered on falling
+ * and rising edge of signal. Whereas IDE device request interrupt on high
+ * level (rising edge in our case). This mean we have fake interrupts, so
+ * we need to check interrupt pin and exit instantly from ISR when line
+ * is on low level.
+ */
+
+irqreturn_t at91_irq_handler(int irq, void *dev_id)
+{
+ int ntries = 8;
+ int pin_val1, pin_val2;
+
+ /* additional deglitch, line can be noisy in badly designed PCB */
+ do {
+ pin_val1 = at91_get_gpio_value(irq);
+ pin_val2 = at91_get_gpio_value(irq);
+ } while (pin_val1 != pin_val2 && --ntries > 0);
+
+ if (pin_val1 == 0 || ntries <= 0)
+ return IRQ_HANDLED;
+
+ return ide_intr(irq, dev_id);
+}
+
+static int __init at91_ide_probe(struct platform_device *pdev)
+{
+ int ret;
+ hw_regs_t hw;
+ hw_regs_t *hws[] = { &hw, NULL, NULL, NULL };
+ struct ide_host *host;
+ struct resource *res;
+ unsigned long tf_base = 0, ctl_base = 0;
+ struct at91_cf_data *board = pdev->dev.platform_data;
+
+ if (!board)
+ return -ENODEV;
+
+ if (board->det_pin && at91_get_gpio_value(board->det_pin) != 0) {
+ perr("no device detected\n");
+ return -ENODEV;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ perr("can't get memory resource\n");
+ return -ENODEV;
+ }
+
+ if (!devm_request_mem_region(&pdev->dev, res->start + TASK_FILE,
+ REGS_SIZE, "ide") ||
+ !devm_request_mem_region(&pdev->dev, res->start + ALT_MODE,
+ REGS_SIZE, "alt")) {
+ perr("memory resources in use\n");
+ return -EBUSY;
+ }
+
+ pdbg("chipselect %u irq %u res %08lx\n", board->chipselect,
+ board->irq_pin, (unsigned long) res->start);
+
+ tf_base = (unsigned long) devm_ioremap(&pdev->dev, res->start + TASK_FILE,
+ REGS_SIZE);
+ ctl_base = (unsigned long) devm_ioremap(&pdev->dev, res->start + ALT_MODE,
+ REGS_SIZE);
+ if (!tf_base || !ctl_base) {
+ perr("can't map memory regions\n");
+ return -EBUSY;
+ }
+
+ memset(&hw, 0, sizeof(hw));
+
+ if (board->flags & AT91_IDE_SWAP_A0_A2) {
+ /* workaround for stupid hardware bug */
+ hw.io_ports.data_addr = tf_base + 0;
+ hw.io_ports.error_addr = tf_base + 4;
+ hw.io_ports.nsect_addr = tf_base + 2;
+ hw.io_ports.lbal_addr = tf_base + 6;
+ hw.io_ports.lbam_addr = tf_base + 1;
+ hw.io_ports.lbah_addr = tf_base + 5;
+ hw.io_ports.device_addr = tf_base + 3;
+ hw.io_ports.command_addr = tf_base + 7;
+ hw.io_ports.ctl_addr = ctl_base + 3;
+ } else
+ ide_std_init_ports(&hw, tf_base, ctl_base + 6);
+
+ hw.irq = board->irq_pin;
+ hw.chipset = ide_generic;
+ hw.dev = &pdev->dev;
+
+ host = ide_host_alloc(&at91_ide_port_info, hws);
+ if (!host) {
+ perr("failed to allocate ide host\n");
+ return -ENOMEM;
+ }
+
+ /* setup Static Memory Controller - PIO 0 as default */
+ apply_timings(board->chipselect, 0, ide_timing_find_mode(XFER_PIO_0), 0);
+
+ /* with GPIO interrupt we have to do quirks in handler */
+ if (board->irq_pin >= PIN_BASE)
+ host->irq_handler = at91_irq_handler;
+
+ host->ports[0]->select_data = board->chipselect;
+
+ ret = ide_host_register(host, &at91_ide_port_info, hws);
+ if (ret) {
+ perr("failed to register ide host\n");
+ goto err_free_host;
+ }
+ platform_set_drvdata(pdev, host);
+ return 0;
+
+err_free_host:
+ ide_host_free(host);
+ return ret;
+}
+
+static int __exit at91_ide_remove(struct platform_device *pdev)
+{
+ struct ide_host *host = platform_get_drvdata(pdev);
+
+ ide_host_remove(host);
+ return 0;
+}
+
+static struct platform_driver at91_ide_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+ .remove = __exit_p(at91_ide_remove),
+};
+
+static int __init at91_ide_init(void)
+{
+ return platform_driver_probe(&at91_ide_driver, at91_ide_probe);
+}
+
+static void __exit at91_ide_exit(void)
+{
+ platform_driver_unregister(&at91_ide_driver);
+}
+
+module_init(at91_ide_init);
+module_exit(at91_ide_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Stanislaw Gruszka <stf_xl@wp.pl>");
+
IDE_PROC_DEVSET(multcount, 0, 16),
IDE_PROC_DEVSET(nowerr, 0, 1),
IDE_PROC_DEVSET(wcache, 0, 1),
- { 0 },
+ { NULL },
};
IDE_PROC_DEVSET(bios_head, 0, 255),
IDE_PROC_DEVSET(bios_sect, 0, 63),
IDE_PROC_DEVSET(ticks, 0, 255),
- { 0 },
+ { NULL },
};
ide_drive_t *uninitialized_var(drive);
ide_handler_t *handler;
unsigned long flags;
- unsigned long wait = -1;
+ int wait = -1;
int plug_device = 0;
spin_lock_irqsave(&hwif->lock, flags);
return irq_ret;
}
+EXPORT_SYMBOL_GPL(ide_intr);
/**
* ide_do_drive_cmd - issue IDE special command
u8 io_32bit = drive->io_32bit;
u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
+ len++;
+
if (io_32bit) {
unsigned long uninitialized_var(flags);
static int init_irq (ide_hwif_t *hwif)
{
struct ide_io_ports *io_ports = &hwif->io_ports;
+ irq_handler_t irq_handler;
int sa = 0;
mutex_lock(&ide_cfg_mtx);
hwif->timer.function = &ide_timer_expiry;
hwif->timer.data = (unsigned long)hwif;
+ irq_handler = hwif->host->irq_handler;
+ if (irq_handler == NULL)
+ irq_handler = ide_intr;
+
#if defined(__mc68000__)
sa = IRQF_SHARED;
#endif /* __mc68000__ */
if (io_ports->ctl_addr)
hwif->tp_ops->set_irq(hwif, 1);
- if (request_irq(hwif->irq, &ide_intr, sa, hwif->name, hwif))
+ if (request_irq(hwif->irq, irq_handler, sa, hwif->name, hwif))
goto out_up;
if (!hwif->rqsize) {
IDE_PROC_DEVSET(pio_mode, 0, 255),
IDE_PROC_DEVSET(unmaskirq, 0, 1),
IDE_PROC_DEVSET(using_dma, 0, 1),
- { 0 },
+ { NULL },
};
static void proc_ide_settings_warn(void)
__IDE_PROC_DEVSET(speed, 0, 0xffff, NULL, NULL),
__IDE_PROC_DEVSET(tdsc, IDETAPE_DSC_RW_MIN, IDETAPE_DSC_RW_MAX,
mulf_tdsc, divf_tdsc),
- { 0 },
+ { NULL },
};
#endif
*/
static void atkbd_dell_laptop_keymap_fixup(struct atkbd *atkbd)
{
- const unsigned int forced_release_keys[] = {
+ static const unsigned int forced_release_keys[] = {
0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8f, 0x93,
};
int i;
*/
static void atkbd_hp_keymap_fixup(struct atkbd *atkbd)
{
- const unsigned int forced_release_keys[] = {
+ static const unsigned int forced_release_keys[] = {
0x94,
};
int i;
goto out;
}
- if (!pdata->debounce_time || !pdata->debounce_time > MAX_MULT ||
- !pdata->coldrive_time || !pdata->coldrive_time > MAX_MULT) {
+ if (!pdata->debounce_time || pdata->debounce_time > MAX_MULT ||
+ !pdata->coldrive_time || pdata->coldrive_time > MAX_MULT) {
printk(KERN_ERR DRV_NAME
": Invalid Debounce/Columdrive Time from pdata\n");
bfin_write_KPAD_MSEL(0xFF0); /* Default MSEL */
#define corgikbd_resume NULL
#endif
-static int __init corgikbd_probe(struct platform_device *pdev)
+static int __devinit corgikbd_probe(struct platform_device *pdev)
{
struct corgikbd *corgikbd;
struct input_dev *input_dev;
return err;
}
-static int corgikbd_remove(struct platform_device *pdev)
+static int __devexit corgikbd_remove(struct platform_device *pdev)
{
int i;
struct corgikbd *corgikbd = platform_get_drvdata(pdev);
static struct platform_driver corgikbd_driver = {
.probe = corgikbd_probe,
- .remove = corgikbd_remove,
+ .remove = __devexit_p(corgikbd_remove),
.suspend = corgikbd_suspend,
.resume = corgikbd_resume,
.driver = {
},
};
-static int __devinit corgikbd_init(void)
+static int __init corgikbd_init(void)
{
return platform_driver_register(&corgikbd_driver);
}
#define omap_kp_resume NULL
#endif
-static int __init omap_kp_probe(struct platform_device *pdev)
+static int __devinit omap_kp_probe(struct platform_device *pdev)
{
struct omap_kp *omap_kp;
struct input_dev *input_dev;
return -EINVAL;
}
-static int omap_kp_remove(struct platform_device *pdev)
+static int __devexit omap_kp_remove(struct platform_device *pdev)
{
struct omap_kp *omap_kp = platform_get_drvdata(pdev);
static struct platform_driver omap_kp_driver = {
.probe = omap_kp_probe,
- .remove = omap_kp_remove,
+ .remove = __devexit_p(omap_kp_remove),
.suspend = omap_kp_suspend,
.resume = omap_kp_resume,
.driver = {
},
};
-static int __devinit omap_kp_init(void)
+static int __init omap_kp_init(void)
{
printk(KERN_INFO "OMAP Keypad Driver\n");
return platform_driver_register(&omap_kp_driver);
#define spitzkbd_resume NULL
#endif
-static int __init spitzkbd_probe(struct platform_device *dev)
+static int __devinit spitzkbd_probe(struct platform_device *dev)
{
struct spitzkbd *spitzkbd;
struct input_dev *input_dev;
return err;
}
-static int spitzkbd_remove(struct platform_device *dev)
+static int __devexit spitzkbd_remove(struct platform_device *dev)
{
int i;
struct spitzkbd *spitzkbd = platform_get_drvdata(dev);
static struct platform_driver spitzkbd_driver = {
.probe = spitzkbd_probe,
- .remove = spitzkbd_remove,
+ .remove = __devexit_p(spitzkbd_remove),
.suspend = spitzkbd_suspend,
.resume = spitzkbd_resume,
.driver = {
},
};
-static int __devinit spitzkbd_init(void)
+static int __init spitzkbd_init(void)
{
return platform_driver_register(&spitzkbd_driver);
}
config MOUSE_PS2_LIFEBOOK
bool "Fujitsu Lifebook PS/2 mouse protocol extension" if EMBEDDED
default y
- depends on MOUSE_PS2
+ depends on MOUSE_PS2 && X86
help
Say Y here if you have a Fujitsu B-series Lifebook PS/2
TouchScreen connected to your system.
ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) {
- pr_err("elantech.c: sending Elantech magic knock failed.\n");
+ pr_debug("elantech.c: sending Elantech magic knock failed.\n");
return -1;
}
* set of magic numbers
*/
if (param[0] != 0x3c || param[1] != 0x03 || param[2] != 0xc8) {
- pr_info("elantech.c: unexpected magic knock result 0x%02x, 0x%02x, 0x%02x.\n",
- param[0], param[1], param[2]);
+ pr_debug("elantech.c: "
+ "unexpected magic knock result 0x%02x, 0x%02x, 0x%02x.\n",
+ param[0], param[1], param[2]);
+ return -1;
+ }
+
+ /*
+ * Query touchpad's firmware version and see if it reports known
+ * value to avoid mis-detection. Logitech mice are known to respond
+ * to Elantech magic knock and there might be more.
+ */
+ if (synaptics_send_cmd(psmouse, ETP_FW_VERSION_QUERY, param)) {
+ pr_debug("elantech.c: failed to query firmware version.\n");
+ return -1;
+ }
+
+ pr_debug("elantech.c: Elantech version query result 0x%02x, 0x%02x, 0x%02x.\n",
+ param[0], param[1], param[2]);
+
+ if (param[0] == 0 || param[1] != 0) {
+ pr_debug("elantech.c: Probably not a real Elantech touchpad. Aborting.\n");
return -1;
}
int i, error;
unsigned char param[3];
- etd = kzalloc(sizeof(struct elantech_data), GFP_KERNEL);
- psmouse->private = etd;
+ psmouse->private = etd = kzalloc(sizeof(struct elantech_data), GFP_KERNEL);
if (!etd)
return -1;
etd->parity[i] = etd->parity[i & (i - 1)] ^ 1;
/*
- * Find out what version hardware this is
+ * Do the version query again so we can store the result
*/
if (synaptics_send_cmd(psmouse, ETP_FW_VERSION_QUERY, param)) {
pr_err("elantech.c: failed to query firmware version.\n");
goto init_fail;
}
- pr_info("elantech.c: Elantech version query result 0x%02x, 0x%02x, 0x%02x.\n",
- param[0], param[1], param[2]);
etd->fw_version_maj = param[0];
etd->fw_version_min = param[2];
__raw_writel(v, trkball->mmio_base + TBCR);
- while (i--) {
+ while (--i) {
if (__raw_readl(trkball->mmio_base + TBCR) == v)
break;
msleep(1);
static int synaptics_query_hardware(struct psmouse *psmouse)
{
- int retries = 0;
-
- while ((retries++ < 3) && psmouse_reset(psmouse))
- /* empty */;
-
if (synaptics_identify(psmouse))
return -1;
if (synaptics_model_id(psmouse))
struct synaptics_data *priv = psmouse->private;
struct synaptics_data old_priv = *priv;
+ psmouse_reset(psmouse);
+
if (synaptics_detect(psmouse, 0))
return -1;
if (!priv)
return -1;
+ psmouse_reset(psmouse);
+
if (synaptics_query_hardware(psmouse)) {
printk(KERN_ERR "Unable to query Synaptics hardware.\n");
goto init_fail;
struct amba_kmi_port *kmi = io->port_data;
unsigned int timeleft = 10000; /* timeout in 100ms */
- while ((readb(KMISTAT) & KMISTAT_TXEMPTY) == 0 && timeleft--)
+ while ((readb(KMISTAT) & KMISTAT_TXEMPTY) == 0 && --timeleft)
udelay(10);
if (timeleft)
io->write = amba_kmi_write;
io->open = amba_kmi_open;
io->close = amba_kmi_close;
- strlcpy(io->name, dev->dev.bus_id, sizeof(io->name));
- strlcpy(io->phys, dev->dev.bus_id, sizeof(io->phys));
+ strlcpy(io->name, dev_name(&dev->dev), sizeof(io->name));
+ strlcpy(io->phys, dev_name(&dev->dev), sizeof(io->phys));
io->port_data = kmi;
io->dev.parent = &dev->dev;
snprintf(serio->name, sizeof(serio->name), "GSC PS/2 %s",
(ps2port->id == GSC_ID_KEYBOARD) ? "keyboard" : "mouse");
- strlcpy(serio->phys, dev->dev.bus_id, sizeof(serio->phys));
+ strlcpy(serio->phys, dev_name(&dev->dev), sizeof(serio->phys));
serio->id.type = SERIO_8042;
serio->write = gscps2_write;
serio->open = gscps2_open;
serio->write = ps2_write;
serio->open = ps2_open;
serio->close = ps2_close;
- strlcpy(serio->name, dev->dev.bus_id, sizeof(serio->name));
- strlcpy(serio->phys, dev->dev.bus_id, sizeof(serio->phys));
+ strlcpy(serio->name, dev_name(&dev->dev), sizeof(serio->name));
+ strlcpy(serio->phys, dev_name(&dev->dev), sizeof(serio->phys));
serio->port_data = ps2if;
serio->dev.parent = &dev->dev;
ps2if->io = serio;
ts_dev->bufferedmeasure = 0;
snprintf(ts_dev->phys, sizeof(ts_dev->phys),
- "%s/input0", pdev->dev.bus_id);
+ "%s/input0", dev_name(&pdev->dev));
input_dev->name = "atmel touch screen controller";
input_dev->phys = ts_dev->phys;
#define corgits_resume NULL
#endif
-static int __init corgits_probe(struct platform_device *pdev)
+static int __devinit corgits_probe(struct platform_device *pdev)
{
struct corgi_ts *corgi_ts;
struct input_dev *input_dev;
return err;
}
-static int corgits_remove(struct platform_device *pdev)
+static int __devexit corgits_remove(struct platform_device *pdev)
{
struct corgi_ts *corgi_ts = platform_get_drvdata(pdev);
corgi_ts->machinfo->put_hsync();
input_unregister_device(corgi_ts->input);
kfree(corgi_ts);
+
return 0;
}
static struct platform_driver corgits_driver = {
.probe = corgits_probe,
- .remove = corgits_remove,
+ .remove = __devexit_p(corgits_remove),
.suspend = corgits_suspend,
.resume = corgits_resume,
.driver = {
},
};
-static int __devinit corgits_init(void)
+static int __init corgits_init(void)
{
return platform_driver_register(&corgits_driver);
}
pdata->init_platform_hw();
- snprintf(ts->phys, sizeof(ts->phys), "%s/input0", client->dev.bus_id);
+ snprintf(ts->phys, sizeof(ts->phys),
+ "%s/input0", dev_name(&client->dev));
input_dev->name = "TSC2007 Touchscreen";
input_dev->phys = ts->phys;
module_param(swap_xy, bool, 0644);
MODULE_PARM_DESC(swap_xy, "If set X and Y axes are swapped.");
+static int hwcalib_xy;
+module_param(hwcalib_xy, bool, 0644);
+MODULE_PARM_DESC(hwcalib_xy, "If set hw-calibrated X/Y are used if available");
+
/* device specifc data/functions */
struct usbtouch_usb;
struct usbtouch_device_info {
#define USB_DEVICE_HID_CLASS(vend, prod) \
.match_flags = USB_DEVICE_ID_MATCH_INT_CLASS \
+ | USB_DEVICE_ID_MATCH_INT_PROTOCOL \
| USB_DEVICE_ID_MATCH_DEVICE, \
.idVendor = (vend), \
.idProduct = (prod), \
static int mtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
- dev->x = (pkt[8] << 8) | pkt[7];
- dev->y = (pkt[10] << 8) | pkt[9];
+ if (hwcalib_xy) {
+ dev->x = (pkt[4] << 8) | pkt[3];
+ dev->y = 0xffff - ((pkt[6] << 8) | pkt[5]);
+ } else {
+ dev->x = (pkt[8] << 8) | pkt[7];
+ dev->y = (pkt[10] << 8) | pkt[9];
+ }
dev->touch = (pkt[2] & 0x40) ? 1 : 0;
return 1;
return ret;
}
+ /* Default min/max xy are the raw values, override if using hw-calib */
+ if (hwcalib_xy) {
+ input_set_abs_params(usbtouch->input, ABS_X, 0, 0xffff, 0, 0);
+ input_set_abs_params(usbtouch->input, ABS_Y, 0, 0xffff, 0, 0);
+ }
+
return 0;
}
#endif
hcall(LHCALL_NOTIFY, lvq->config.pfn << PAGE_SHIFT, 0, 0);
}
+/* An extern declaration inside a C file is bad form. Don't do it. */
+extern void lguest_setup_irq(unsigned int irq);
+
/* This routine finds the first virtqueue described in the configuration of
* this device and sets it up.
*
goto unmap;
}
+ /* Make sure the interrupt is allocated. */
+ lguest_setup_irq(lvq->config.irq);
+
/* Tell the interrupt for this virtqueue to go to the virtio_ring
* interrupt handler. */
/* FIXME: We used to have a flag for the Host to tell us we could use
return mddev;
}
-static void mddev_delayed_delete(struct work_struct *ws)
-{
- mddev_t *mddev = container_of(ws, mddev_t, del_work);
- kobject_del(&mddev->kobj);
- kobject_put(&mddev->kobj);
-}
+static void mddev_delayed_delete(struct work_struct *ws);
static void mddev_put(mddev_t *mddev)
{
int mdp_major = 0;
+static void mddev_delayed_delete(struct work_struct *ws)
+{
+ mddev_t *mddev = container_of(ws, mddev_t, del_work);
+
+ if (mddev->private == &md_redundancy_group) {
+ sysfs_remove_group(&mddev->kobj, &md_redundancy_group);
+ if (mddev->sysfs_action)
+ sysfs_put(mddev->sysfs_action);
+ mddev->sysfs_action = NULL;
+ mddev->private = NULL;
+ }
+ kobject_del(&mddev->kobj);
+ kobject_put(&mddev->kobj);
+}
+
static int md_alloc(dev_t dev, char *name)
{
static DEFINE_MUTEX(disks_mutex);
mddev->queue->merge_bvec_fn = NULL;
mddev->queue->unplug_fn = NULL;
mddev->queue->backing_dev_info.congested_fn = NULL;
- if (mddev->pers->sync_request) {
- sysfs_remove_group(&mddev->kobj, &md_redundancy_group);
- if (mddev->sysfs_action)
- sysfs_put(mddev->sysfs_action);
- mddev->sysfs_action = NULL;
- }
module_put(mddev->pers->owner);
+ if (mddev->pers->sync_request)
+ mddev->private = &md_redundancy_group;
mddev->pers = NULL;
/* tell userspace to handle 'inactive' */
sysfs_notify_dirent(mddev->sysfs_state);
usb_to_input_id(udev, &input->id);
input->dev.parent = &dev->intf->dev;
- set_bit(EV_KEY, input->evbit);
- set_bit(BTN_0, input->keybit);
+ __set_bit(EV_KEY, input->evbit);
+ __set_bit(KEY_CAMERA, input->keybit);
if ((ret = input_register_device(input)) < 0)
goto error;
static void uvc_input_report_key(struct uvc_device *dev, unsigned int code,
int value)
{
- if (dev->input)
+ if (dev->input) {
input_report_key(dev->input, code, value);
+ input_sync(dev->input);
+ }
}
#else
return;
uvc_trace(UVC_TRACE_STATUS, "Button (intf %u) %s len %d\n",
data[1], data[3] ? "pressed" : "released", len);
- uvc_input_report_key(dev, BTN_0, data[3]);
+ uvc_input_report_key(dev, KEY_CAMERA, data[3]);
} else {
uvc_trace(UVC_TRACE_STATUS, "Stream %u error event %02x %02x "
"len %d.\n", data[1], data[2], data[3], len);
controllers (default=0)");
static int mpt_msi_enable_sas;
-module_param(mpt_msi_enable_sas, int, 1);
+module_param(mpt_msi_enable_sas, int, 0);
MODULE_PARM_DESC(mpt_msi_enable_sas, " Enable MSI Support for SAS \
- controllers (default=1)");
+ controllers (default=0)");
static int mpt_channel_mapping;
sg_init_one(&sg, data_buf, len);
- /*
- * The spec states that CSR and CID accesses have a timeout
- * of 64 clock cycles.
- */
- data.timeout_ns = 0;
- data.timeout_clks = 64;
+ if (opcode == MMC_SEND_CSD || opcode == MMC_SEND_CID) {
+ /*
+ * The spec states that CSR and CID accesses have a timeout
+ * of 64 clock cycles.
+ */
+ data.timeout_ns = 0;
+ data.timeout_clks = 64;
+ } else
+ mmc_set_data_timeout(&data, card);
mmc_wait_for_req(host, &mrq);
static const struct sdhci_pci_fixes sdhci_cafe = {
.quirks = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER |
+ SDHCI_QUIRK_NO_BUSY_IRQ |
SDHCI_QUIRK_BROKEN_TIMEOUT_VAL,
};
if (host->cmd->data)
DBG("Cannot wait for busy signal when also "
"doing a data transfer");
- else
+ else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ))
return;
+
+ /* The controller does not support the end-of-busy IRQ,
+ * fall through and take the SDHCI_INT_RESPONSE */
}
if (intmask & SDHCI_INT_RESPONSE)
#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12)
/* Controller has an issue with buffer bits for small transfers */
#define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13)
+/* Controller does not provide transfer-complete interrupt when not busy */
+#define SDHCI_QUIRK_NO_BUSY_IRQ (1<<14)
int irq; /* Device IRQ */
void __iomem * ioaddr; /* Mapped address */
if (!(info->flags & IS_POW2PS))
return info;
}
- }
+ } else
+ return info;
}
}
physmap_data = dev->dev.platform_data;
+ if (info->cmtd) {
#ifdef CONFIG_MTD_PARTITIONS
- if (info->nr_parts) {
- del_mtd_partitions(info->cmtd);
- kfree(info->parts);
- } else if (physmap_data->nr_parts)
- del_mtd_partitions(info->cmtd);
- else
- del_mtd_device(info->cmtd);
+ if (info->nr_parts || physmap_data->nr_parts)
+ del_mtd_partitions(info->cmtd);
+ else
+ del_mtd_device(info->cmtd);
#else
- del_mtd_device(info->cmtd);
+ del_mtd_device(info->cmtd);
+#endif
+ }
+#ifdef CONFIG_MTD_PARTITIONS
+ if (info->nr_parts)
+ kfree(info->parts);
#endif
#ifdef CONFIG_MTD_CONCAT
static struct platform_driver orion_nand_driver = {
.probe = orion_nand_probe,
- .remove = orion_nand_remove,
+ .remove = __devexit_p(orion_nand_remove),
.driver = {
.name = "orion_nand",
.owner = THIS_MODULE,
#
obj-$(CONFIG_ARM_AM79C961A) += am79c961a.o
-obj-$(CONFIG_ARM_ETHERH) += etherh.o ../8390.o
+obj-$(CONFIG_ARM_ETHERH) += etherh.o
obj-$(CONFIG_ARM_ETHER3) += ether3.o
obj-$(CONFIG_ARM_ETHER1) += ether1.o
obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o
.ndo_open = etherh_open,
.ndo_stop = etherh_close,
.ndo_set_config = etherh_set_config,
- .ndo_start_xmit = ei_start_xmit,
- .ndo_tx_timeout = ei_tx_timeout,
- .ndo_get_stats = ei_get_stats,
- .ndo_set_multicast_list = ei_set_multicast_list,
+ .ndo_start_xmit = __ei_start_xmit,
+ .ndo_tx_timeout = __ei_tx_timeout,
+ .ndo_get_stats = __ei_get_stats,
+ .ndo_set_multicast_list = __ei_set_multicast_list,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = eth_mac_addr,
.ndo_change_mtu = eth_change_mtu,
#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = ei_poll,
+ .ndo_poll_controller = __ei_poll,
#endif
};
msleep(1);
}
- if (reset_timeout == 0) {
+ if (reset_timeout < 0) {
dev_crit(ksp->dev,
"Timeout waiting for DMA engines to reset\n");
/* And blithely carry on */
static void b44_chip_reset(struct b44 *bp, int reset_kind)
{
struct ssb_device *sdev = bp->sdev;
+ bool was_enabled;
- if (ssb_device_is_enabled(bp->sdev)) {
+ was_enabled = ssb_device_is_enabled(bp->sdev);
+
+ ssb_device_enable(bp->sdev, 0);
+ ssb_pcicore_dev_irqvecs_enable(&sdev->bus->pcicore, sdev);
+
+ if (was_enabled) {
bw32(bp, B44_RCV_LAZY, 0);
bw32(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE);
b44_wait_bit(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE, 200, 1);
}
bw32(bp, B44_DMARX_CTRL, 0);
bp->rx_prod = bp->rx_cons = 0;
- } else
- ssb_pcicore_dev_irqvecs_enable(&sdev->bus->pcicore, sdev);
+ }
- ssb_device_enable(bp->sdev, 0);
b44_clear_stats(bp);
/*
struct net_device *dev = ssb_get_drvdata(sdev);
unregister_netdev(dev);
+ ssb_device_disable(sdev, 0);
ssb_bus_may_powerdown(sdev->bus);
free_netdev(dev);
ssb_pcihost_set_power_state(sdev, PCI_D3hot);
const struct net_device_ops *slave_ops
= slave->dev->netdev_ops;
if (slave_ops->ndo_neigh_setup)
- return slave_ops->ndo_neigh_setup(dev, parms);
+ return slave_ops->ndo_neigh_setup(slave->dev, parms);
}
return 0;
}
spin_lock_irqsave(&priv->txlock, flags);
/* check if there is space to queue this packet */
- if (nr_frags > priv->num_txbdfree) {
+ if ((nr_frags+1) > priv->num_txbdfree) {
/* no space, stop the queue */
netif_stop_queue(dev);
dev->stats.tx_fifo_errors++;
if (this_dev != 0) break; /* only autoprobe 1st one */
printk(KERN_NOTICE "hp-plus.c: Presently autoprobing (not recommended) for a single card.\n");
}
- dev = alloc_ei_netdev();
+ dev = alloc_eip_netdev();
if (!dev)
break;
dev->irq = irq[this_dev];
goto out_inc;
i = atomic_read(&rxring->next_to_clean);
- while (limit-- > 0) {
+ while (limit > 0) {
rxdesc = rxring->desc;
rxdesc += i;
if ((rxdesc->descwb.flags & cpu_to_le16(RXWBFLAG_OWN)) ||
!(rxdesc->descwb.desccnt & RXWBDCNT_WBCPL))
goto out;
+ --limit;
desccnt = rxdesc->descwb.desccnt & RXWBDCNT_DCNT;
adapter->pci_mem_read = netxen_nic_pci_mem_read_2M;
adapter->pci_mem_write = netxen_nic_pci_mem_write_2M;
- mem_ptr0 = ioremap(mem_base, mem_len);
+ mem_ptr0 = pci_ioremap_bar(pdev, 0);
+ if (mem_ptr0 == NULL) {
+ dev_err(&pdev->dev, "failed to map PCI bar 0\n");
+ return -EIO;
+ }
+
pci_len0 = mem_len;
first_page_group_start = 0;
first_page_group_end = 0;
* See if the firmware gave us a virtual-physical port mapping.
*/
adapter->physical_port = adapter->portnum;
- i = adapter->pci_read_normalize(adapter, CRB_V2P(adapter->portnum));
- if (i != 0x55555555)
- adapter->physical_port = i;
+ if (adapter->fw_major < 4) {
+ i = adapter->pci_read_normalize(adapter,
+ CRB_V2P(adapter->portnum));
+ if (i != 0x55555555)
+ adapter->physical_port = i;
+ }
adapter->flags &= ~(NETXEN_NIC_MSI_ENABLED | NETXEN_NIC_MSIX_ENABLED);
DEBUG(3, "%s: in rx_packet(), status %4.4x, rx_status %4.4x.\n",
dev->name, inw(ioaddr+EL3_STATUS), inw(ioaddr+RxStatus));
while (!((rx_status = inw(ioaddr + RxStatus)) & 0x8000) &&
- (--worklimit >= 0)) {
+ worklimit > 0) {
+ worklimit--;
if (rx_status & 0x4000) { /* Error, update stats. */
short error = rx_status & 0x3800;
dev->stats.rx_errors++;
DEBUG(3, "%s: in rx_packet(), status %4.4x, rx_status %4.4x.\n",
dev->name, inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS));
while (!((rx_status = inw(ioaddr + RX_STATUS)) & 0x8000) &&
- (--worklimit >= 0)) {
+ worklimit > 0) {
+ worklimit--;
if (rx_status & 0x4000) { /* Error, update stats. */
short error = rx_status & 0x3800;
dev->stats.rx_errors++;
#define RTL8169_TX_TIMEOUT (6*HZ)
#define RTL8169_PHY_TIMEOUT (10*HZ)
-#define RTL_EEPROM_SIG cpu_to_le32(0x8129)
-#define RTL_EEPROM_SIG_MASK cpu_to_le32(0xffff)
+#define RTL_EEPROM_SIG 0x8129
#define RTL_EEPROM_SIG_ADDR 0x0000
+#define RTL_EEPROM_MAC_ADDR 0x0007
/* write/read MMIO register */
#define RTL_W8(reg, val8) writeb ((val8), ioaddr + (reg))
/* Cfg9346Bits */
Cfg9346_Lock = 0x00,
Cfg9346_Unlock = 0xc0,
+ Cfg9346_Program = 0x80, /* Programming mode */
+ Cfg9346_EECS = 0x08, /* Chip select */
+ Cfg9346_EESK = 0x04, /* Serial data clock */
+ Cfg9346_EEDI = 0x02, /* Data input */
+ Cfg9346_EEDO = 0x01, /* Data output */
/* rx_mode_bits */
AcceptErr = 0x20,
/* RxConfigBits */
RxCfgFIFOShift = 13,
RxCfgDMAShift = 8,
+ RxCfg9356SEL = 6, /* EEPROM type: 0 = 9346, 1 = 9356 */
/* TxConfigBits */
TxInterFrameGapShift = 24,
};
+/* Delay between EEPROM clock transitions. Force out buffered PCI writes. */
+#define RTL_EEPROM_DELAY() RTL_R8(Cfg9346)
+#define RTL_EEPROM_READ_CMD 6
+
+/* read 16bit word stored in EEPROM. EEPROM is addressed by words. */
+static u16 rtl_eeprom_read(void __iomem *ioaddr, int addr)
+{
+ u16 result = 0;
+ int cmd, cmd_len, i;
+
+ /* check for EEPROM address size (in bits) */
+ if (RTL_R32(RxConfig) & (1 << RxCfg9356SEL)) {
+ /* EEPROM is 93C56 */
+ cmd_len = 3 + 8; /* 3 bits for command id and 8 for address */
+ cmd = (RTL_EEPROM_READ_CMD << 8) | (addr & 0xff);
+ } else {
+ /* EEPROM is 93C46 */
+ cmd_len = 3 + 6; /* 3 bits for command id and 6 for address */
+ cmd = (RTL_EEPROM_READ_CMD << 6) | (addr & 0x3f);
+ }
+
+ /* enter programming mode */
+ RTL_W8(Cfg9346, Cfg9346_Program | Cfg9346_EECS);
+ RTL_EEPROM_DELAY();
+
+ /* write command and requested address */
+ while (cmd_len--) {
+ u8 x = Cfg9346_Program | Cfg9346_EECS;
+
+ x |= (cmd & (1 << cmd_len)) ? Cfg9346_EEDI : 0;
+
+ /* write a bit */
+ RTL_W8(Cfg9346, x);
+ RTL_EEPROM_DELAY();
+
+ /* raise clock */
+ RTL_W8(Cfg9346, x | Cfg9346_EESK);
+ RTL_EEPROM_DELAY();
+ }
+
+ /* lower clock */
+ RTL_W8(Cfg9346, Cfg9346_Program | Cfg9346_EECS);
+ RTL_EEPROM_DELAY();
+
+ /* read back 16bit value */
+ for (i = 16; i > 0; i--) {
+ /* raise clock */
+ RTL_W8(Cfg9346, Cfg9346_Program | Cfg9346_EECS | Cfg9346_EESK);
+ RTL_EEPROM_DELAY();
+
+ result <<= 1;
+ result |= (RTL_R8(Cfg9346) & Cfg9346_EEDO) ? 1 : 0;
+
+ /* lower clock */
+ RTL_W8(Cfg9346, Cfg9346_Program | Cfg9346_EECS);
+ RTL_EEPROM_DELAY();
+ }
+
+ RTL_W8(Cfg9346, Cfg9346_Program);
+ /* leave programming mode */
+ RTL_W8(Cfg9346, Cfg9346_Lock);
+
+ return result;
+}
+
+static void rtl_init_mac_address(struct rtl8169_private *tp,
+ void __iomem *ioaddr)
+{
+ struct pci_dev *pdev = tp->pci_dev;
+ u16 x;
+ u8 mac[8];
+
+ /* read EEPROM signature */
+ x = rtl_eeprom_read(ioaddr, RTL_EEPROM_SIG_ADDR);
+
+ if (x != RTL_EEPROM_SIG) {
+ dev_info(&pdev->dev, "Missing EEPROM signature: %04x\n", x);
+ return;
+ }
+
+ /* read MAC address */
+ x = rtl_eeprom_read(ioaddr, RTL_EEPROM_MAC_ADDR);
+ mac[0] = x & 0xff;
+ mac[1] = x >> 8;
+ x = rtl_eeprom_read(ioaddr, RTL_EEPROM_MAC_ADDR + 1);
+ mac[2] = x & 0xff;
+ mac[3] = x >> 8;
+ x = rtl_eeprom_read(ioaddr, RTL_EEPROM_MAC_ADDR + 2);
+ mac[4] = x & 0xff;
+ mac[5] = x >> 8;
+
+ if (netif_msg_probe(tp)) {
+ DECLARE_MAC_BUF(buf);
+
+ dev_info(&pdev->dev, "MAC address found in EEPROM: %s\n",
+ print_mac(buf, mac));
+ }
+
+ if (is_valid_ether_addr(mac))
+ rtl_rar_set(tp, mac);
+}
+
static int __devinit
rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
tp->mmio_addr = ioaddr;
+ rtl_init_mac_address(tp, ioaddr);
+
/* Get MAC address */
for (i = 0; i < MAC_ADDR_LEN; i++)
dev->dev_addr[i] = RTL_R8(MAC0 + i);
#define SMC_USE_16BIT 0
#define SMC_USE_32BIT 1
#define SMC_IRQ_SENSE IRQF_TRIGGER_LOW
+#elif defined(CONFIG_ARCH_OMAP34XX)
+ #define SMC_USE_16BIT 0
+ #define SMC_USE_32BIT 1
+ #define SMC_IRQ_SENSE IRQF_TRIGGER_LOW
+ #define SMC_MEM_RESERVED 1
+#elif defined(CONFIG_ARCH_OMAP24XX)
+ #define SMC_USE_16BIT 0
+ #define SMC_USE_32BIT 1
+ #define SMC_IRQ_SENSE IRQF_TRIGGER_LOW
+ #define SMC_MEM_RESERVED 1
#else
/*
* Default configuration
#define CHIP_9116 0x0116
#define CHIP_9117 0x0117
#define CHIP_9118 0x0118
+#define CHIP_9211 0x9211
#define CHIP_9215 0x115A
#define CHIP_9217 0x117A
#define CHIP_9218 0x118A
{ CHIP_9116, "LAN9116" },
{ CHIP_9117, "LAN9117" },
{ CHIP_9118, "LAN9118" },
+ { CHIP_9211, "LAN9211" },
{ CHIP_9215, "LAN9215" },
{ CHIP_9217, "LAN9217" },
{ CHIP_9218, "LAN9218" },
break;
} while (val & (GREG_SWRST_TXRST | GREG_SWRST_RXRST));
- if (limit <= 0)
+ if (limit < 0)
printk(KERN_ERR "%s: SW reset is ghetto.\n", gp->dev->name);
if (gp->phy_type == phy_serialink || gp->phy_type == phy_serdes)
{
u32 reg;
- if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+ if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
return;
reg = MII_TG3_MISC_SHDW_WREN |
goto err_out_trdev;
}
- ret = request_irq(pdev->irq, tms380tr_interrupt, IRQF_SHARED,
- dev->name, dev);
- if (ret)
- goto err_out_region;
-
dev->base_addr = pci_ioaddr;
dev->irq = pci_irq_line;
dev->dma = 0;
ret = tmsdev_init(dev, &pdev->dev);
if (ret) {
printk("%s: unable to get memory for dev->priv.\n", dev->name);
- goto err_out_irq;
+ goto err_out_region;
}
tp = netdev_priv(dev);
tp->tmspriv = cardinfo;
+ ret = request_irq(pdev->irq, tms380tr_interrupt, IRQF_SHARED,
+ dev->name, dev);
+ if (ret)
+ goto err_out_tmsdev;
+
dev->open = tms380tr_open;
dev->stop = tms380tr_close;
pci_set_drvdata(pdev, dev);
ret = register_netdev(dev);
if (ret)
- goto err_out_tmsdev;
+ goto err_out_irq;
return 0;
+err_out_irq:
+ free_irq(pdev->irq, dev);
err_out_tmsdev:
pci_set_drvdata(pdev, NULL);
tmsdev_term(dev);
-err_out_irq:
- free_irq(pdev->irq, dev);
err_out_region:
release_region(pci_ioaddr, TMS_PCI_IO_EXTENT);
err_out_trdev:
static int uec_mdio_reset(struct mii_bus *bus)
{
struct ucc_mii_mng __iomem *regs = (void __iomem *)bus->priv;
- unsigned int timeout = PHY_INIT_TIMEOUT;
+ int timeout = PHY_INIT_TIMEOUT;
mutex_lock(&bus->mdio_lock);
mutex_unlock(&bus->mdio_lock);
- if (timeout <= 0) {
+ if (timeout < 0) {
printk(KERN_ERR "%s: The MII Bus is stuck!\n", bus->name);
return -EBUSY;
}
// Cables-to-Go USB Ethernet Adapter
USB_DEVICE(0x0b95, 0x772a),
.driver_info = (unsigned long) &ax88772_info,
+}, {
+ // ABOCOM for pci
+ USB_DEVICE(0x14ea, 0xab11),
+ .driver_info = (unsigned long) &ax88178_info,
+}, {
+ // ASIX 88772a
+ USB_DEVICE(0x0db0, 0xa877),
+ .driver_info = (unsigned long) &ax88772_info,
},
{ }, // END
};
USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET,
USB_CDC_PROTO_NONE),
.driver_info = (unsigned long) &cdc_info,
+}, {
+ /* Ericsson F3507g */
+ USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1900, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &cdc_info,
},
{ }, // END
};
},
{
USB_DEVICE(0x0a47, 0x9601), /* Hirose USB-100 */
+ .driver_info = (unsigned long)&dm9601_info,
+ },
+ {
+ USB_DEVICE(0x0fe6, 0x8101), /* DM9601 USB to Fast Ethernet Adapter */
.driver_info = (unsigned long)&dm9601_info,
},
{}, // END
if (dev->mii.mdio_read)
return mii_link_ok(&dev->mii);
- /* Otherwise, say we're up (to avoid breaking scripts) */
- return 1;
+ /* Otherwise, dtrt for drivers calling netif_carrier_{on,off} */
+ return ethtool_op_get_link(net);
}
EXPORT_SYMBOL_GPL(usbnet_get_link);
USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM,
USB_CDC_PROTO_NONE),
.driver_info = (unsigned long) &bogus_mdlm_info,
+}, {
+ /* Motorola MOTOMAGX phones */
+ USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x6425, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &bogus_mdlm_info,
},
/* Olympus has some models with a Zaurus-compatible option.
return 0;
}
+static int veth_close(struct net_device *dev)
+{
+ struct veth_priv *priv = netdev_priv(dev);
+
+ netif_carrier_off(dev);
+ netif_carrier_off(priv->peer);
+
+ return 0;
+}
+
static int veth_dev_init(struct net_device *dev)
{
struct veth_net_stats *stats;
static const struct net_device_ops veth_netdev_ops = {
.ndo_init = veth_dev_init,
.ndo_open = veth_open,
+ .ndo_stop = veth_close,
.ndo_start_xmit = veth_xmit,
.ndo_get_stats = veth_get_stats,
.ndo_set_mac_address = eth_mac_addr,
dev->destructor = veth_dev_free;
}
-static void veth_change_state(struct net_device *dev)
-{
- struct net_device *peer;
- struct veth_priv *priv;
-
- priv = netdev_priv(dev);
- peer = priv->peer;
-
- if (netif_carrier_ok(peer)) {
- if (!netif_carrier_ok(dev))
- netif_carrier_on(dev);
- } else {
- if (netif_carrier_ok(dev))
- netif_carrier_off(dev);
- }
-}
-
-static int veth_device_event(struct notifier_block *unused,
- unsigned long event, void *ptr)
-{
- struct net_device *dev = ptr;
-
- if (dev->netdev_ops->ndo_open != veth_open)
- goto out;
-
- switch (event) {
- case NETDEV_CHANGE:
- veth_change_state(dev);
- break;
- }
-out:
- return NOTIFY_DONE;
-}
-
-static struct notifier_block veth_notifier_block __read_mostly = {
- .notifier_call = veth_device_event,
-};
-
/*
* netlink interface
*/
static __init int veth_init(void)
{
- register_netdevice_notifier(&veth_notifier_block);
return rtnl_link_register(&veth_link_ops);
}
static __exit void veth_exit(void)
{
rtnl_link_unregister(&veth_link_ops);
- unregister_netdevice_notifier(&veth_notifier_block);
}
module_init(veth_init);
bad:
if (ah)
ath9k_hw_detach(ah);
+ ath9k_exit_debug(sc);
return error;
}
static int ath_attach(u16 devid, struct ath_softc *sc)
{
struct ieee80211_hw *hw = sc->hw;
- int error = 0;
+ int error = 0, i;
DPRINTF(sc, ATH_DBG_CONFIG, "Attach ATH hw\n");
/* initialize tx/rx engine */
error = ath_tx_init(sc, ATH_TXBUF);
if (error != 0)
- goto detach;
+ goto error_attach;
error = ath_rx_init(sc, ATH_RXBUF);
if (error != 0)
- goto detach;
+ goto error_attach;
#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
/* Initialze h/w Rfkill */
INIT_DELAYED_WORK(&sc->rf_kill.rfkill_poll, ath_rfkill_poll);
/* Initialize s/w rfkill */
- if (ath_init_sw_rfkill(sc))
- goto detach;
+ error = ath_init_sw_rfkill(sc);
+ if (error)
+ goto error_attach;
#endif
error = ieee80211_register_hw(hw);
ath_init_leds(sc);
return 0;
-detach:
- ath_detach(sc);
+
+error_attach:
+ /* cleanup tx queues */
+ for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
+ if (ATH_TXQ_SETUP(sc, i))
+ ath_tx_cleanupq(sc, &sc->tx.txq[i]);
+
+ ath9k_hw_detach(sc->sc_ah);
+ ath9k_exit_debug(sc);
+
return error;
}
}
err = iwl_eeprom_check_version(priv);
if (err)
- goto out_iounmap;
+ goto out_free_eeprom;
/* extract MAC Address */
iwl_eeprom_get_mac(priv, priv->mac_addr);
return 0;
out_remove_sysfs:
+ destroy_workqueue(priv->workqueue);
+ priv->workqueue = NULL;
sysfs_remove_group(&pdev->dev.kobj, &iwl_attribute_group);
out_uninit_drv:
iwl_uninit_drv(priv);
out_iounmap:
pci_iounmap(pdev, priv->hw_base);
out_pci_release_regions:
- pci_release_regions(pdev);
pci_set_drvdata(pdev, NULL);
+ pci_release_regions(pdev);
out_pci_disable_device:
pci_disable_device(pdev);
out_ieee80211_free_hw:
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
if (err < 0) {
IWL_DEBUG_INFO("Failed to init the card\n");
- goto out_remove_sysfs;
+ goto out_iounmap;
}
/***********************
err = iwl3945_eeprom_init(priv);
if (err) {
IWL_ERROR("Unable to init EEPROM\n");
- goto out_remove_sysfs;
+ goto out_iounmap;
}
/* MAC Address location in EEPROM same for 3945/4965 */
get_eeprom_mac(priv, priv->mac_addr);
err = iwl3945_init_channel_map(priv);
if (err) {
IWL_ERROR("initializing regulatory failed: %d\n", err);
- goto out_release_irq;
+ goto out_unset_hw_setting;
}
err = iwl3945_init_geos(priv);
return 0;
out_remove_sysfs:
+ destroy_workqueue(priv->workqueue);
+ priv->workqueue = NULL;
sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group);
out_free_geos:
iwl3945_free_geos(priv);
out_free_channel_map:
iwl3945_free_channel_map(priv);
-
-
- out_release_irq:
- destroy_workqueue(priv->workqueue);
- priv->workqueue = NULL;
+ out_unset_hw_setting:
iwl3945_unset_hw_setting(priv);
-
out_iounmap:
pci_iounmap(pdev, priv->hw_base);
out_pci_release_regions:
pci_release_regions(pdev);
out_pci_disable_device:
- pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
+ pci_disable_device(pdev);
out_ieee80211_free_hw:
ieee80211_free_hw(priv->hw);
out:
static void lbs_ethtool_get_drvinfo(struct net_device *dev,
struct ethtool_drvinfo *info)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
snprintf(info->fw_version, 32, "%u.%u.%u.p%u",
priv->fwrelease >> 24 & 0xff,
static int lbs_ethtool_get_eeprom(struct net_device *dev,
struct ethtool_eeprom *eeprom, u8 * bytes)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct cmd_ds_802_11_eeprom_access cmd;
int ret;
static void lbs_ethtool_get_stats(struct net_device *dev,
struct ethtool_stats *stats, uint64_t *data)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct cmd_ds_mesh_access mesh_access;
int ret;
static int lbs_ethtool_get_sset_count(struct net_device *dev, int sset)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
if (sset == ETH_SS_STATS && dev == priv->mesh_dev)
return MESH_STATS_NUM;
static void lbs_ethtool_get_wol(struct net_device *dev,
struct ethtool_wolinfo *wol)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
if (priv->wol_criteria == 0xffffffff) {
/* Interface driver didn't configure wake */
static int lbs_ethtool_set_wol(struct net_device *dev,
struct ethtool_wolinfo *wol)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
uint32_t criteria = 0;
if (priv->wol_criteria == 0xffffffff && wol->wolopts)
static ssize_t if_usb_firmware_set(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
struct if_usb_card *cardp = priv->card;
char fwname[FIRMWARE_NAME_MAX];
int ret;
static ssize_t if_usb_boot2_set(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
struct if_usb_card *cardp = priv->card;
char fwname[FIRMWARE_NAME_MAX];
int ret;
static ssize_t lbs_anycast_get(struct device *dev,
struct device_attribute *attr, char * buf)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
struct cmd_ds_mesh_access mesh_access;
int ret;
static ssize_t lbs_anycast_set(struct device *dev,
struct device_attribute *attr, const char * buf, size_t count)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
struct cmd_ds_mesh_access mesh_access;
uint32_t datum;
int ret;
static ssize_t lbs_prb_rsp_limit_get(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
struct cmd_ds_mesh_access mesh_access;
int ret;
u32 retry_limit;
static ssize_t lbs_prb_rsp_limit_set(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
struct cmd_ds_mesh_access mesh_access;
int ret;
unsigned long retry_limit;
static ssize_t lbs_rtap_get(struct device *dev,
struct device_attribute *attr, char * buf)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
return snprintf(buf, 5, "0x%X\n", priv->monitormode);
}
struct device_attribute *attr, const char * buf, size_t count)
{
int monitor_mode;
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
sscanf(buf, "%x", &monitor_mode);
if (monitor_mode) {
static ssize_t lbs_mesh_get(struct device *dev,
struct device_attribute *attr, char * buf)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
return snprintf(buf, 5, "0x%X\n", !!priv->mesh_dev);
}
static ssize_t lbs_mesh_set(struct device *dev,
struct device_attribute *attr, const char * buf, size_t count)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
int enable;
int ret, action = CMD_ACT_MESH_CONFIG_STOP;
*/
static int lbs_dev_open(struct net_device *dev)
{
- struct lbs_private *priv = netdev_priv(dev) ;
+ struct lbs_private *priv = dev->ml_priv;
int ret = 0;
lbs_deb_enter(LBS_DEB_NET);
*/
static int lbs_eth_stop(struct net_device *dev)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_NET);
static void lbs_tx_timeout(struct net_device *dev)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_TX);
*/
static struct net_device_stats *lbs_get_stats(struct net_device *dev)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_NET);
return &priv->stats;
static int lbs_set_mac_address(struct net_device *dev, void *addr)
{
int ret = 0;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct sockaddr *phwaddr = addr;
struct cmd_ds_802_11_mac_address cmd;
static void lbs_set_multicast_list(struct net_device *dev)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
schedule_work(&priv->mcast_work);
}
static int lbs_thread(void *data)
{
struct net_device *dev = data;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
wait_queue_t wait;
lbs_deb_enter(LBS_DEB_THREAD);
goto done;
}
priv = netdev_priv(dev);
+ dev->ml_priv = priv;
if (lbs_init_adapter(priv)) {
lbs_pr_err("failed to initialize adapter structure.\n");
static int mesh_get_default_parameters(struct device *dev,
struct mrvl_mesh_defaults *defs)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
struct cmd_ds_mesh_config cmd;
int ret;
static ssize_t bootflag_set(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
struct cmd_ds_mesh_config cmd;
uint32_t datum;
int ret;
static ssize_t boottime_set(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
struct cmd_ds_mesh_config cmd;
uint32_t datum;
int ret;
static ssize_t channel_set(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
struct cmd_ds_mesh_config cmd;
uint32_t datum;
int ret;
struct cmd_ds_mesh_config cmd;
struct mrvl_mesh_defaults defs;
struct mrvl_meshie *ie;
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
int len;
int ret;
struct cmd_ds_mesh_config cmd;
struct mrvl_mesh_defaults defs;
struct mrvl_meshie *ie;
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
uint32_t datum;
int ret;
struct cmd_ds_mesh_config cmd;
struct mrvl_mesh_defaults defs;
struct mrvl_meshie *ie;
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
uint32_t datum;
int ret;
struct cmd_ds_mesh_config cmd;
struct mrvl_mesh_defaults defs;
struct mrvl_meshie *ie;
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
uint32_t datum;
int ret;
union iwreq_data *wrqu, char *extra)
{
DECLARE_SSID_BUF(ssid);
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
int ret = 0;
lbs_deb_enter(LBS_DEB_WEXT);
struct iw_point *dwrq, char *extra)
{
#define SCAN_ITEM_SIZE 128
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
int err = 0;
char *ev = extra;
char *stop = ev + dwrq->length;
int lbs_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
unsigned long flags;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct txpd *txpd;
char *p802x_hdr;
uint16_t pkt_len;
static int lbs_get_freq(struct net_device *dev, struct iw_request_info *info,
struct iw_freq *fwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct chan_freq_power *cfp;
lbs_deb_enter(LBS_DEB_WEXT);
static int lbs_get_wap(struct net_device *dev, struct iw_request_info *info,
struct sockaddr *awrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_WEXT);
static int lbs_set_nick(struct net_device *dev, struct iw_request_info *info,
struct iw_point *dwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_WEXT);
static int lbs_get_nick(struct net_device *dev, struct iw_request_info *info,
struct iw_point *dwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_WEXT);
static int mesh_get_nick(struct net_device *dev, struct iw_request_info *info,
struct iw_point *dwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_WEXT);
struct iw_param *vwrq, char *extra)
{
int ret = 0;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
u32 val = vwrq->value;
lbs_deb_enter(LBS_DEB_WEXT);
static int lbs_get_rts(struct net_device *dev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
int ret = 0;
u16 val = 0;
static int lbs_set_frag(struct net_device *dev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
int ret = 0;
u32 val = vwrq->value;
static int lbs_get_frag(struct net_device *dev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
int ret = 0;
u16 val = 0;
static int lbs_get_mode(struct net_device *dev,
struct iw_request_info *info, u32 * uwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_WEXT);
struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
s16 curlevel = 0;
int ret = 0;
static int lbs_set_retry(struct net_device *dev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
int ret = 0;
u16 slimit = 0, llimit = 0;
static int lbs_get_retry(struct net_device *dev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
int ret = 0;
u16 val = 0;
struct iw_point *dwrq, char *extra)
{
int i, j;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct iw_range *range = (struct iw_range *)extra;
struct chan_freq_power *cfp;
u8 rates[MAX_RATES + 1];
static int lbs_set_power(struct net_device *dev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_WEXT);
static int lbs_get_power(struct net_device *dev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_WEXT);
EXCELLENT = 95,
PERFECT = 100
};
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
u32 rssi_qual;
u32 tx_qual;
u32 quality = 0;
struct iw_freq *fwrq, char *extra)
{
int ret = -EINVAL;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct chan_freq_power *cfp;
struct assoc_request * assoc_req;
struct iw_request_info *info,
struct iw_freq *fwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct chan_freq_power *cfp;
int ret = -EINVAL;
static int lbs_set_rate(struct net_device *dev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
u8 new_rate = 0;
int ret = -EINVAL;
u8 rates[MAX_RATES + 1];
static int lbs_get_rate(struct net_device *dev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_WEXT);
struct iw_request_info *info, u32 * uwrq, char *extra)
{
int ret = 0;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct assoc_request * assoc_req;
lbs_deb_enter(LBS_DEB_WEXT);
struct iw_request_info *info,
struct iw_point *dwrq, u8 * extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
lbs_deb_enter(LBS_DEB_WEXT);
struct iw_point *dwrq, char *extra)
{
int ret = 0;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct assoc_request * assoc_req;
u16 is_default = 0, index = 0, set_tx_key = 0;
char *extra)
{
int ret = -EINVAL;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
int index, max_key_len;
char *extra)
{
int ret = 0;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
int alg = ext->alg;
struct assoc_request * assoc_req;
struct iw_point *dwrq,
char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
int ret = 0;
struct assoc_request * assoc_req;
char *extra)
{
int ret = 0;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_WEXT);
struct iw_param *dwrq,
char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct assoc_request * assoc_req;
int ret = 0;
int updated = 0;
char *extra)
{
int ret = 0;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_WEXT);
struct iw_param *vwrq, char *extra)
{
int ret = 0;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
s16 dbm = (s16) vwrq->value;
lbs_deb_enter(LBS_DEB_WEXT);
static int lbs_get_essid(struct net_device *dev, struct iw_request_info *info,
struct iw_point *dwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_WEXT);
static int lbs_set_essid(struct net_device *dev, struct iw_request_info *info,
struct iw_point *dwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
int ret = 0;
u8 ssid[IW_ESSID_MAX_SIZE];
u8 ssid_len = 0;
struct iw_request_info *info,
struct iw_point *dwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_WEXT);
struct iw_request_info *info,
struct iw_point *dwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
int ret = 0;
lbs_deb_enter(LBS_DEB_WEXT);
static int lbs_set_wap(struct net_device *dev, struct iw_request_info *info,
struct sockaddr *awrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct assoc_request * assoc_req;
int ret = 0;
return NOTIFY_DONE;
}
+
+static void orinoco_register_pm_notifier(struct orinoco_private *priv)
+{
+ priv->pm_notifier.notifier_call = orinoco_pm_notifier;
+ register_pm_notifier(&priv->pm_notifier);
+}
+
+static void orinoco_unregister_pm_notifier(struct orinoco_private *priv)
+{
+ unregister_pm_notifier(&priv->pm_notifier);
+}
#else /* !PM_SLEEP || HERMES_CACHE_FW_ON_INIT */
-#define orinoco_pm_notifier NULL
+#define orinoco_register_pm_notifier(priv) do { } while(0)
+#define orinoco_unregister_pm_notifier(priv) do { } while(0)
#endif
/********************************************************************/
priv->cached_fw = NULL;
/* Register PM notifiers */
- priv->pm_notifier.notifier_call = orinoco_pm_notifier;
- register_pm_notifier(&priv->pm_notifier);
+ orinoco_register_pm_notifier(priv);
return dev;
}
kfree(rx_data);
}
- unregister_pm_notifier(&priv->pm_notifier);
+ orinoco_unregister_pm_notifier(priv);
orinoco_uncache_fw(priv);
priv->wpa_ie_len = 0;
__le32 req_id)
{
struct p54_common *priv = dev->priv;
- struct sk_buff *entry = priv->tx_queue.next;
+ struct sk_buff *entry;
unsigned long flags;
spin_lock_irqsave(&priv->tx_queue.lock, flags);
+ entry = priv->tx_queue.next;
while (entry != (struct sk_buff *)&priv->tx_queue) {
struct p54_hdr *hdr = (struct p54_hdr *) entry->data;
struct p54_common *priv = dev->priv;
struct p54_hdr *hdr = (struct p54_hdr *) skb->data;
struct p54_frame_sent *payload = (struct p54_frame_sent *) hdr->data;
- struct sk_buff *entry = (struct sk_buff *) priv->tx_queue.next;
+ struct sk_buff *entry;
u32 addr = le32_to_cpu(hdr->req_id) - priv->headroom;
struct memrecord *range = NULL;
u32 freed = 0;
int count, idx;
spin_lock_irqsave(&priv->tx_queue.lock, flags);
+ entry = (struct sk_buff *) priv->tx_queue.next;
while (entry != (struct sk_buff *)&priv->tx_queue) {
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry);
struct p54_hdr *entry_hdr;
struct p54_hdr *data, u32 len)
{
struct p54_common *priv = dev->priv;
- struct sk_buff *entry = priv->tx_queue.next;
+ struct sk_buff *entry;
struct sk_buff *target_skb = NULL;
struct ieee80211_tx_info *info;
struct memrecord *range;
}
}
+ entry = priv->tx_queue.next;
while (left--) {
u32 hole_size;
info = IEEE80211_SKB_CB(entry);
{ USB_DEVICE(0x13b1, 0x000d), USB_DEVICE_DATA(&rt2500usb_ops) },
{ USB_DEVICE(0x13b1, 0x0011), USB_DEVICE_DATA(&rt2500usb_ops) },
{ USB_DEVICE(0x13b1, 0x001a), USB_DEVICE_DATA(&rt2500usb_ops) },
+ /* CNet */
+ { USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt2500usb_ops) },
/* Conceptronic */
{ USB_DEVICE(0x14b2, 0x3c02), USB_DEVICE_DATA(&rt2500usb_ops) },
/* D-LINK */
{ USB_DEVICE(0x148f, 0x2570), USB_DEVICE_DATA(&rt2500usb_ops) },
{ USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt2500usb_ops) },
{ USB_DEVICE(0x148f, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) },
+ /* Sagem */
+ { USB_DEVICE(0x079b, 0x004b), USB_DEVICE_DATA(&rt2500usb_ops) },
/* Siemens */
{ USB_DEVICE(0x0681, 0x3c06), USB_DEVICE_DATA(&rt2500usb_ops) },
/* SMC */
{ USB_DEVICE(0x0707, 0xee13), USB_DEVICE_DATA(&rt2500usb_ops) },
/* Spairon */
{ USB_DEVICE(0x114b, 0x0110), USB_DEVICE_DATA(&rt2500usb_ops) },
+ /* SURECOM */
+ { USB_DEVICE(0x0769, 0x11f3), USB_DEVICE_DATA(&rt2500usb_ops) },
/* Trust */
{ USB_DEVICE(0x0eb0, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) },
+ /* VTech */
+ { USB_DEVICE(0x0f88, 0x3012), USB_DEVICE_DATA(&rt2500usb_ops) },
/* Zinwell */
{ USB_DEVICE(0x5a57, 0x0260), USB_DEVICE_DATA(&rt2500usb_ops) },
{ 0, }
*/
static struct usb_device_id rt73usb_device_table[] = {
/* AboCom */
+ { USB_DEVICE(0x07b8, 0xb21b), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x07b8, 0xb21c), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x07b8, 0xb21d), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x07b8, 0xb21e), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x07b8, 0xb21f), USB_DEVICE_DATA(&rt73usb_ops) },
+ /* AL */
+ { USB_DEVICE(0x14b2, 0x3c10), USB_DEVICE_DATA(&rt73usb_ops) },
+ /* Amigo */
+ { USB_DEVICE(0x148f, 0x9021), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x0eb0, 0x9021), USB_DEVICE_DATA(&rt73usb_ops) },
+ /* AMIT */
+ { USB_DEVICE(0x18c5, 0x0002), USB_DEVICE_DATA(&rt73usb_ops) },
/* Askey */
{ USB_DEVICE(0x1690, 0x0722), USB_DEVICE_DATA(&rt73usb_ops) },
/* ASUS */
{ USB_DEVICE(0x050d, 0x905c), USB_DEVICE_DATA(&rt73usb_ops) },
/* Billionton */
{ USB_DEVICE(0x1631, 0xc019), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x08dd, 0x0120), USB_DEVICE_DATA(&rt73usb_ops) },
/* Buffalo */
+ { USB_DEVICE(0x0411, 0x00d8), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) },
/* CNet */
{ USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x07d1, 0x3c04), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x07d1, 0x3c06), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x07d1, 0x3c07), USB_DEVICE_DATA(&rt73usb_ops) },
+ /* Edimax */
+ { USB_DEVICE(0x7392, 0x7318), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x7392, 0x7618), USB_DEVICE_DATA(&rt73usb_ops) },
+ /* EnGenius */
+ { USB_DEVICE(0x1740, 0x3701), USB_DEVICE_DATA(&rt73usb_ops) },
/* Gemtek */
{ USB_DEVICE(0x15a9, 0x0004), USB_DEVICE_DATA(&rt73usb_ops) },
/* Gigabyte */
{ USB_DEVICE(0x0db0, 0xa861), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x0db0, 0xa874), USB_DEVICE_DATA(&rt73usb_ops) },
/* Ralink */
+ { USB_DEVICE(0x04bb, 0x093d), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x148f, 0x2671), USB_DEVICE_DATA(&rt73usb_ops) },
/* Qcom */
{ USB_DEVICE(0x18e8, 0x6196), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x18e8, 0x6229), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x18e8, 0x6238), USB_DEVICE_DATA(&rt73usb_ops) },
+ /* Samsung */
+ { USB_DEVICE(0x04e8, 0x4471), USB_DEVICE_DATA(&rt73usb_ops) },
/* Senao */
{ USB_DEVICE(0x1740, 0x7100), USB_DEVICE_DATA(&rt73usb_ops) },
/* Sitecom */
- { USB_DEVICE(0x0df6, 0x9712), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x0df6, 0x0024), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x0df6, 0x0027), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x0df6, 0x002f), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x0df6, 0x90ac), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x0df6, 0x9712), USB_DEVICE_DATA(&rt73usb_ops) },
/* Surecom */
{ USB_DEVICE(0x0769, 0x31f3), USB_DEVICE_DATA(&rt73usb_ops) },
+ /* Philips */
+ { USB_DEVICE(0x0471, 0x200a), USB_DEVICE_DATA(&rt73usb_ops) },
/* Planex */
{ USB_DEVICE(0x2019, 0xab01), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x2019, 0xab50), USB_DEVICE_DATA(&rt73usb_ops) },
+ /* Zcom */
+ { USB_DEVICE(0x0cde, 0x001c), USB_DEVICE_DATA(&rt73usb_ops) },
+ /* ZyXEL */
+ { USB_DEVICE(0x0586, 0x3415), USB_DEVICE_DATA(&rt73usb_ops) },
{ 0, }
};
{USB_DEVICE(0x0bda, 0x8189), .driver_info = DEVICE_RTL8187B},
{USB_DEVICE(0x0bda, 0x8197), .driver_info = DEVICE_RTL8187B},
{USB_DEVICE(0x0bda, 0x8198), .driver_info = DEVICE_RTL8187B},
+ /* Surecom */
+ {USB_DEVICE(0x0769, 0x11F2), .driver_info = DEVICE_RTL8187},
+ /* Logitech */
+ {USB_DEVICE(0x0789, 0x010C), .driver_info = DEVICE_RTL8187},
/* Netgear */
{USB_DEVICE(0x0846, 0x6100), .driver_info = DEVICE_RTL8187},
{USB_DEVICE(0x0846, 0x6a00), .driver_info = DEVICE_RTL8187},
/* Sitecom */
{USB_DEVICE(0x0df6, 0x000d), .driver_info = DEVICE_RTL8187},
{USB_DEVICE(0x0df6, 0x0028), .driver_info = DEVICE_RTL8187B},
+ /* Sphairon Access Systems GmbH */
+ {USB_DEVICE(0x114B, 0x0150), .driver_info = DEVICE_RTL8187},
+ /* Dick Smith Electronics */
+ {USB_DEVICE(0x1371, 0x9401), .driver_info = DEVICE_RTL8187},
/* Abocom */
{USB_DEVICE(0x13d1, 0xabe6), .driver_info = DEVICE_RTL8187},
+ /* Qcom */
+ {USB_DEVICE(0x18E8, 0x6232), .driver_info = DEVICE_RTL8187},
+ /* AirLive */
+ {USB_DEVICE(0x1b75, 0x8187), .driver_info = DEVICE_RTL8187},
{}
};
#include <linux/list.h>
#include <linux/netdevice.h>
#include <linux/scatterlist.h>
+#include <linux/skbuff.h>
#include <scsi/libiscsi_tcp.h>
/* from cxgb3 LLD */
struct cxgb3i_conn *cconn;
};
+/**
+ * struct cxgb3i_task_data - private iscsi task data
+ *
+ * @nr_frags: # of coalesced page frags (from scsi sgl)
+ * @frags: coalesced page frags (from scsi sgl)
+ * @skb: tx pdu skb
+ * @offset: data offset for the next pdu
+ * @count: max. possible pdu payload
+ * @sgoffset: offset to the first sg entry for a given offset
+ */
+#define MAX_PDU_FRAGS ((ULP2_MAX_PDU_PAYLOAD + 512 - 1) / 512)
+struct cxgb3i_task_data {
+ unsigned short nr_frags;
+ skb_frag_t frags[MAX_PDU_FRAGS];
+ struct sk_buff *skb;
+ unsigned int offset;
+ unsigned int count;
+ unsigned int sgoffset;
+};
+
int cxgb3i_iscsi_init(void);
void cxgb3i_iscsi_cleanup(void);
write_unlock(&cxgb3i_ddp_rwlock);
ddp_log_info("nppods %u (0x%x ~ 0x%x), bits %u, mask 0x%x,0x%x "
- "pkt %u,%u.\n",
+ "pkt %u/%u, %u/%u.\n",
ppmax, ddp->llimit, ddp->ulimit, ddp->idx_bits,
ddp->idx_mask, ddp->rsvd_tag_mask,
- ddp->max_txsz, ddp->max_rxsz);
+ ddp->max_txsz, uinfo.max_txsz,
+ ddp->max_rxsz, uinfo.max_rxsz);
return 0;
free_ddp_map:
* cxgb3i_adapter_ddp_init - initialize the adapter's ddp resource
* @tdev: t3cdev adapter
* @tformat: tag format
- * @txsz: max tx pkt size, filled in by this func.
- * @rxsz: max rx pkt size, filled in by this func.
+ * @txsz: max tx pdu payload size, filled in by this func.
+ * @rxsz: max rx pdu payload size, filled in by this func.
* initialize the ddp pagepod manager for a given adapter if needed and
* setup the tag format for a given iscsi entity
*/
tformat->sw_bits, tformat->rsvd_bits,
tformat->rsvd_shift, tformat->rsvd_mask);
- *txsz = ddp->max_txsz;
- *rxsz = ddp->max_rxsz;
- ddp_log_info("ddp max pkt size: %u, %u.\n",
- ddp->max_txsz, ddp->max_rxsz);
+ *txsz = min_t(unsigned int, ULP2_MAX_PDU_PAYLOAD,
+ ddp->max_txsz - ISCSI_PDU_NONPAYLOAD_LEN);
+ *rxsz = min_t(unsigned int, ULP2_MAX_PDU_PAYLOAD,
+ ddp->max_rxsz - ISCSI_PDU_NONPAYLOAD_LEN);
+ ddp_log_info("max payload size: %u/%u, %u/%u.\n",
+ *txsz, ddp->max_txsz, *rxsz, ddp->max_rxsz);
return 0;
}
EXPORT_SYMBOL_GPL(cxgb3i_adapter_ddp_init);
#ifndef __CXGB3I_ULP2_DDP_H__
#define __CXGB3I_ULP2_DDP_H__
+#include <linux/vmalloc.h>
+
/**
* struct cxgb3i_tag_format - cxgb3i ulp tag format for an iscsi entity
*
struct sk_buff **gl_skb;
};
+#define ISCSI_PDU_NONPAYLOAD_LEN 312 /* bhs(48) + ahs(256) + digest(8) */
#define ULP2_MAX_PKT_SIZE 16224
-#define ULP2_MAX_PDU_PAYLOAD (ULP2_MAX_PKT_SIZE - ISCSI_PDU_NONPAYLOAD_MAX)
+#define ULP2_MAX_PDU_PAYLOAD (ULP2_MAX_PKT_SIZE - ISCSI_PDU_NONPAYLOAD_LEN)
#define PPOD_PAGES_MAX 4
#define PPOD_PAGES_SHIFT 2 /* 4 pages per pod */
#include "cxgb3i.h"
#define DRV_MODULE_NAME "cxgb3i"
-#define DRV_MODULE_VERSION "1.0.0"
-#define DRV_MODULE_RELDATE "Jun. 1, 2008"
+#define DRV_MODULE_VERSION "1.0.1"
+#define DRV_MODULE_RELDATE "Jan. 2009"
static char version[] =
"Chelsio S3xx iSCSI Driver " DRV_MODULE_NAME
cls_session = iscsi_session_setup(&cxgb3i_iscsi_transport, shost,
cmds_max,
- sizeof(struct iscsi_tcp_task),
+ sizeof(struct iscsi_tcp_task) +
+ sizeof(struct cxgb3i_task_data),
initial_cmdsn, ISCSI_MAX_TARGET);
if (!cls_session)
return NULL;
{
struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
struct cxgb3i_conn *cconn = tcp_conn->dd_data;
- unsigned int max = min_t(unsigned int, ULP2_MAX_PDU_PAYLOAD,
- cconn->hba->snic->tx_max_size -
- ISCSI_PDU_NONPAYLOAD_MAX);
+ unsigned int max = max(512 * MAX_SKB_FRAGS, SKB_TX_HEADROOM);
+ max = min(cconn->hba->snic->tx_max_size, max);
if (conn->max_xmit_dlength)
- conn->max_xmit_dlength = min_t(unsigned int,
- conn->max_xmit_dlength, max);
+ conn->max_xmit_dlength = min(conn->max_xmit_dlength, max);
else
conn->max_xmit_dlength = max;
align_pdu_size(conn->max_xmit_dlength);
- cxgb3i_log_info("conn 0x%p, max xmit %u.\n",
+ cxgb3i_api_debug("conn 0x%p, max xmit %u.\n",
conn, conn->max_xmit_dlength);
return 0;
}
{
struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
struct cxgb3i_conn *cconn = tcp_conn->dd_data;
- unsigned int max = min_t(unsigned int, ULP2_MAX_PDU_PAYLOAD,
- cconn->hba->snic->rx_max_size -
- ISCSI_PDU_NONPAYLOAD_MAX);
+ unsigned int max = cconn->hba->snic->rx_max_size;
align_pdu_size(max);
if (conn->max_recv_dlength) {
conn->max_recv_dlength, max);
return -EINVAL;
}
- conn->max_recv_dlength = min_t(unsigned int,
- conn->max_recv_dlength, max);
+ conn->max_recv_dlength = min(conn->max_recv_dlength, max);
align_pdu_size(conn->max_recv_dlength);
} else
conn->max_recv_dlength = max;
.proc_name = "cxgb3i",
.queuecommand = iscsi_queuecommand,
.change_queue_depth = iscsi_change_queue_depth,
- .can_queue = 128 * (ISCSI_DEF_XMIT_CMDS_MAX - 1),
+ .can_queue = CXGB3I_SCSI_QDEPTH_DFLT - 1,
.sg_tablesize = SG_ALL,
.max_sectors = 0xFFFF,
.cmd_per_lun = ISCSI_DEF_CMD_PER_LUN,
#include "cxgb3i_ddp.h"
#ifdef __DEBUG_C3CN_CONN__
-#define c3cn_conn_debug cxgb3i_log_info
+#define c3cn_conn_debug cxgb3i_log_debug
#else
#define c3cn_conn_debug(fmt...)
#endif
#ifdef __DEBUG_C3CN_TX__
-#define c3cn_tx_debug cxgb3i_log_debug
+#define c3cn_tx_debug cxgb3i_log_debug
#else
#define c3cn_tx_debug(fmt...)
#endif
#ifdef __DEBUG_C3CN_RX__
-#define c3cn_rx_debug cxgb3i_log_debug
+#define c3cn_rx_debug cxgb3i_log_debug
#else
#define c3cn_rx_debug(fmt...)
#endif
module_param(cxgb3_rcv_win, int, 0644);
MODULE_PARM_DESC(cxgb3_rcv_win, "TCP receive window in bytes (default=256KB)");
-static int cxgb3_snd_win = 64 * 1024;
+static int cxgb3_snd_win = 128 * 1024;
module_param(cxgb3_snd_win, int, 0644);
-MODULE_PARM_DESC(cxgb3_snd_win, "TCP send window in bytes (default=64KB)");
+MODULE_PARM_DESC(cxgb3_snd_win, "TCP send window in bytes (default=128KB)");
static int cxgb3_rx_credit_thres = 10 * 1024;
module_param(cxgb3_rx_credit_thres, int, 0644);
static void skb_entail(struct s3_conn *c3cn, struct sk_buff *skb,
int flags)
{
- CXGB3_SKB_CB(skb)->seq = c3cn->write_seq;
- CXGB3_SKB_CB(skb)->flags = flags;
+ skb_tcp_seq(skb) = c3cn->write_seq;
+ skb_flags(skb) = flags;
__skb_queue_tail(&c3cn->write_queue, skb);
}
* The number of WRs needed for an skb depends on the number of fragments
* in the skb and whether it has any payload in its main body. This maps the
* length of the gather list represented by an skb into the # of necessary WRs.
- *
- * The max. length of an skb is controlled by the max pdu size which is ~16K.
- * Also, assume the min. fragment length is the sector size (512), then add
- * extra fragment counts for iscsi bhs and payload padding.
+ * The extra two fragments are for iscsi bhs and payload padding.
*/
-#define SKB_WR_LIST_SIZE (16384/512 + 3)
+#define SKB_WR_LIST_SIZE (MAX_SKB_FRAGS + 2)
static unsigned int skb_wrs[SKB_WR_LIST_SIZE] __read_mostly;
static void s3_init_wr_tab(unsigned int wr_len)
static inline void reset_wr_list(struct s3_conn *c3cn)
{
- c3cn->wr_pending_head = NULL;
+ c3cn->wr_pending_head = c3cn->wr_pending_tail = NULL;
}
/*
static inline void enqueue_wr(struct s3_conn *c3cn,
struct sk_buff *skb)
{
- skb_wr_data(skb) = NULL;
+ skb_tx_wr_next(skb) = NULL;
/*
* We want to take an extra reference since both us and the driver
if (!c3cn->wr_pending_head)
c3cn->wr_pending_head = skb;
else
- skb_wr_data(skb) = skb;
+ skb_tx_wr_next(c3cn->wr_pending_tail) = skb;
c3cn->wr_pending_tail = skb;
}
+static int count_pending_wrs(struct s3_conn *c3cn)
+{
+ int n = 0;
+ const struct sk_buff *skb = c3cn->wr_pending_head;
+
+ while (skb) {
+ n += skb->csum;
+ skb = skb_tx_wr_next(skb);
+ }
+ return n;
+}
+
static inline struct sk_buff *peek_wr(const struct s3_conn *c3cn)
{
return c3cn->wr_pending_head;
if (likely(skb)) {
/* Don't bother clearing the tail */
- c3cn->wr_pending_head = skb_wr_data(skb);
- skb_wr_data(skb) = NULL;
+ c3cn->wr_pending_head = skb_tx_wr_next(skb);
+ skb_tx_wr_next(skb) = NULL;
}
return skb;
}
}
static inline void make_tx_data_wr(struct s3_conn *c3cn, struct sk_buff *skb,
- int len)
+ int len, int req_completion)
{
struct tx_data_wr *req;
skb_reset_transport_header(skb);
req = (struct tx_data_wr *)__skb_push(skb, sizeof(*req));
- req->wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_TX_DATA));
+ req->wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_TX_DATA) |
+ (req_completion ? F_WR_COMPL : 0));
req->wr_lo = htonl(V_WR_TID(c3cn->tid));
req->sndseq = htonl(c3cn->snd_nxt);
/* len includes the length of any HW ULP additions */
if (unlikely(c3cn->state == C3CN_STATE_CONNECTING ||
c3cn->state == C3CN_STATE_CLOSE_WAIT_1 ||
- c3cn->state == C3CN_STATE_ABORTING)) {
+ c3cn->state >= C3CN_STATE_ABORTING)) {
c3cn_tx_debug("c3cn 0x%p, in closing state %u.\n",
c3cn, c3cn->state);
return 0;
if (c3cn->wr_avail < wrs_needed) {
c3cn_tx_debug("c3cn 0x%p, skb len %u/%u, frag %u, "
"wr %d < %u.\n",
- c3cn, skb->len, skb->datalen, frags,
+ c3cn, skb->len, skb->data_len, frags,
wrs_needed, c3cn->wr_avail);
break;
}
c3cn->wr_unacked += wrs_needed;
enqueue_wr(c3cn, skb);
- if (likely(CXGB3_SKB_CB(skb)->flags & C3CB_FLAG_NEED_HDR)) {
- len += ulp_extra_len(skb);
- make_tx_data_wr(c3cn, skb, len);
- c3cn->snd_nxt += len;
- if ((req_completion
- && c3cn->wr_unacked == wrs_needed)
- || (CXGB3_SKB_CB(skb)->flags & C3CB_FLAG_COMPL)
- || c3cn->wr_unacked >= c3cn->wr_max / 2) {
- struct work_request_hdr *wr = cplhdr(skb);
+ c3cn_tx_debug("c3cn 0x%p, enqueue, skb len %u/%u, frag %u, "
+ "wr %d, left %u, unack %u.\n",
+ c3cn, skb->len, skb->data_len, frags,
+ wrs_needed, c3cn->wr_avail, c3cn->wr_unacked);
+
- wr->wr_hi |= htonl(F_WR_COMPL);
+ if (likely(skb_flags(skb) & C3CB_FLAG_NEED_HDR)) {
+ if ((req_completion &&
+ c3cn->wr_unacked == wrs_needed) ||
+ (skb_flags(skb) & C3CB_FLAG_COMPL) ||
+ c3cn->wr_unacked >= c3cn->wr_max / 2) {
+ req_completion = 1;
c3cn->wr_unacked = 0;
}
- CXGB3_SKB_CB(skb)->flags &= ~C3CB_FLAG_NEED_HDR;
+ len += ulp_extra_len(skb);
+ make_tx_data_wr(c3cn, skb, len, req_completion);
+ c3cn->snd_nxt += len;
+ skb_flags(skb) &= ~C3CB_FLAG_NEED_HDR;
}
total_size += skb->truesize;
if (unlikely(c3cn_flag(c3cn, C3CN_ACTIVE_CLOSE_NEEDED)))
/* upper layer has requested closing */
send_abort_req(c3cn);
- else if (c3cn_push_tx_frames(c3cn, 1))
+ else {
+ if (skb_queue_len(&c3cn->write_queue))
+ c3cn_push_tx_frames(c3cn, 1);
cxgb3i_conn_tx_open(c3cn);
+ }
}
static int do_act_establish(struct t3cdev *cdev, struct sk_buff *skb,
return;
}
- CXGB3_SKB_CB(skb)->seq = ntohl(hdr_cpl->seq);
- CXGB3_SKB_CB(skb)->flags = 0;
+ skb_tcp_seq(skb) = ntohl(hdr_cpl->seq);
+ skb_flags(skb) = 0;
skb_reset_transport_header(skb);
__skb_pull(skb, sizeof(struct cpl_iscsi_hdr));
goto abort_conn;
skb_ulp_mode(skb) = ULP2_FLAG_DATA_READY;
- skb_ulp_pdulen(skb) = ntohs(ddp_cpl.len);
- skb_ulp_ddigest(skb) = ntohl(ddp_cpl.ulp_crc);
+ skb_rx_pdulen(skb) = ntohs(ddp_cpl.len);
+ skb_rx_ddigest(skb) = ntohl(ddp_cpl.ulp_crc);
status = ntohl(ddp_cpl.ddp_status);
c3cn_rx_debug("rx skb 0x%p, len %u, pdulen %u, ddp status 0x%x.\n",
- skb, skb->len, skb_ulp_pdulen(skb), status);
+ skb, skb->len, skb_rx_pdulen(skb), status);
if (status & (1 << RX_DDP_STATUS_HCRC_SHIFT))
skb_ulp_mode(skb) |= ULP2_FLAG_HCRC_ERROR;
} else if (status & (1 << RX_DDP_STATUS_DDP_SHIFT))
skb_ulp_mode(skb) |= ULP2_FLAG_DATA_DDPED;
- c3cn->rcv_nxt = ntohl(ddp_cpl.seq) + skb_ulp_pdulen(skb);
+ c3cn->rcv_nxt = ntohl(ddp_cpl.seq) + skb_rx_pdulen(skb);
__pskb_trim(skb, len);
__skb_queue_tail(&c3cn->receive_queue, skb);
cxgb3i_conn_pdu_ready(c3cn);
* Process an acknowledgment of WR completion. Advance snd_una and send the
* next batch of work requests from the write queue.
*/
+static void check_wr_invariants(struct s3_conn *c3cn)
+{
+ int pending = count_pending_wrs(c3cn);
+
+ if (unlikely(c3cn->wr_avail + pending != c3cn->wr_max))
+ cxgb3i_log_error("TID %u: credit imbalance: avail %u, "
+ "pending %u, total should be %u\n",
+ c3cn->tid, c3cn->wr_avail, pending,
+ c3cn->wr_max);
+}
+
static void process_wr_ack(struct s3_conn *c3cn, struct sk_buff *skb)
{
struct cpl_wr_ack *hdr = cplhdr(skb);
unsigned int credits = ntohs(hdr->credits);
u32 snd_una = ntohl(hdr->snd_una);
+ c3cn_tx_debug("%u WR credits, avail %u, unack %u, TID %u, state %u.\n",
+ credits, c3cn->wr_avail, c3cn->wr_unacked,
+ c3cn->tid, c3cn->state);
+
c3cn->wr_avail += credits;
if (c3cn->wr_unacked > c3cn->wr_max - c3cn->wr_avail)
c3cn->wr_unacked = c3cn->wr_max - c3cn->wr_avail;
break;
}
if (unlikely(credits < p->csum)) {
+ struct tx_data_wr *w = cplhdr(p);
+ cxgb3i_log_error("TID %u got %u WR credits need %u, "
+ "len %u, main body %u, frags %u, "
+ "seq # %u, ACK una %u, ACK nxt %u, "
+ "WR_AVAIL %u, WRs pending %u\n",
+ c3cn->tid, credits, p->csum, p->len,
+ p->len - p->data_len,
+ skb_shinfo(p)->nr_frags,
+ ntohl(w->sndseq), snd_una,
+ ntohl(hdr->snd_nxt), c3cn->wr_avail,
+ count_pending_wrs(c3cn) - credits);
p->csum -= credits;
break;
} else {
}
}
- if (unlikely(before(snd_una, c3cn->snd_una)))
+ check_wr_invariants(c3cn);
+
+ if (unlikely(before(snd_una, c3cn->snd_una))) {
+ cxgb3i_log_error("TID %u, unexpected sequence # %u in WR_ACK "
+ "snd_una %u\n",
+ c3cn->tid, snd_una, c3cn->snd_una);
goto out_free;
+ }
if (c3cn->snd_una != snd_una) {
c3cn->snd_una = snd_una;
dst_confirm(c3cn->dst_cache);
}
- if (skb_queue_len(&c3cn->write_queue) && c3cn_push_tx_frames(c3cn, 0))
+ if (skb_queue_len(&c3cn->write_queue)) {
+ if (c3cn_push_tx_frames(c3cn, 0))
+ cxgb3i_conn_tx_open(c3cn);
+ } else
cxgb3i_conn_tx_open(c3cn);
out_free:
__kfree_skb(skb);
struct dst_entry *dst)
{
BUG_ON(c3cn->cdev != cdev);
- c3cn->wr_max = c3cn->wr_avail = T3C_DATA(cdev)->max_wrs;
+ c3cn->wr_max = c3cn->wr_avail = T3C_DATA(cdev)->max_wrs - 1;
c3cn->wr_unacked = 0;
c3cn->mss_idx = select_mss(c3cn, dst_mtu(dst));
goto out_err;
}
- err = -EPIPE;
if (c3cn->err) {
c3cn_tx_debug("c3cn 0x%p, err %d.\n", c3cn, c3cn->err);
+ err = -EPIPE;
+ goto out_err;
+ }
+
+ if (c3cn->write_seq - c3cn->snd_una >= cxgb3_snd_win) {
+ c3cn_tx_debug("c3cn 0x%p, snd %u - %u > %u.\n",
+ c3cn, c3cn->write_seq, c3cn->snd_una,
+ cxgb3_snd_win);
+ err = -EAGAIN;
goto out_err;
}
* @flag: see C3CB_FLAG_* below
* @ulp_mode: ULP mode/submode of sk_buff
* @seq: tcp sequence number
- * @ddigest: pdu data digest
- * @pdulen: recovered pdu length
- * @wr_data: scratch area for tx wr
*/
+struct cxgb3_skb_rx_cb {
+ __u32 ddigest; /* data digest */
+ __u32 pdulen; /* recovered pdu length */
+};
+
+struct cxgb3_skb_tx_cb {
+ struct sk_buff *wr_next; /* next wr */
+};
+
struct cxgb3_skb_cb {
__u8 flags;
__u8 ulp_mode;
__u32 seq;
- __u32 ddigest;
- __u32 pdulen;
- struct sk_buff *wr_data;
+ union {
+ struct cxgb3_skb_rx_cb rx;
+ struct cxgb3_skb_tx_cb tx;
+ };
};
#define CXGB3_SKB_CB(skb) ((struct cxgb3_skb_cb *)&((skb)->cb[0]))
-
+#define skb_flags(skb) (CXGB3_SKB_CB(skb)->flags)
#define skb_ulp_mode(skb) (CXGB3_SKB_CB(skb)->ulp_mode)
-#define skb_ulp_ddigest(skb) (CXGB3_SKB_CB(skb)->ddigest)
-#define skb_ulp_pdulen(skb) (CXGB3_SKB_CB(skb)->pdulen)
-#define skb_wr_data(skb) (CXGB3_SKB_CB(skb)->wr_data)
+#define skb_tcp_seq(skb) (CXGB3_SKB_CB(skb)->seq)
+#define skb_rx_ddigest(skb) (CXGB3_SKB_CB(skb)->rx.ddigest)
+#define skb_rx_pdulen(skb) (CXGB3_SKB_CB(skb)->rx.pdulen)
+#define skb_tx_wr_next(skb) (CXGB3_SKB_CB(skb)->tx.wr_next)
enum c3cb_flags {
C3CB_FLAG_NEED_HDR = 1 << 0, /* packet needs a TX_DATA_WR header */
/* for TX: a skb must have a headroom of at least TX_HEADER_LEN bytes */
#define TX_HEADER_LEN \
(sizeof(struct tx_data_wr) + sizeof(struct sge_opaque_hdr))
+#define SKB_TX_HEADROOM SKB_MAX_HEAD(TX_HEADER_LEN)
/*
* get and set private ip for iscsi traffic
#define cxgb3i_tx_debug(fmt...)
#endif
+/* always allocate rooms for AHS */
+#define SKB_TX_PDU_HEADER_LEN \
+ (sizeof(struct iscsi_hdr) + ISCSI_MAX_AHS_SIZE)
+static unsigned int skb_extra_headroom;
static struct page *pad_page;
/*
void cxgb3i_conn_cleanup_task(struct iscsi_task *task)
{
- struct iscsi_tcp_task *tcp_task = task->dd_data;
+ struct cxgb3i_task_data *tdata = task->dd_data +
+ sizeof(struct iscsi_tcp_task);
/* never reached the xmit task callout */
- if (tcp_task->dd_data)
- kfree_skb(tcp_task->dd_data);
- tcp_task->dd_data = NULL;
+ if (tdata->skb)
+ __kfree_skb(tdata->skb);
+ memset(tdata, 0, sizeof(struct cxgb3i_task_data));
/* MNC - Do we need a check in case this is called but
* cxgb3i_conn_alloc_pdu has never been called on the task */
iscsi_tcp_cleanup_task(task);
}
-/*
- * We do not support ahs yet
- */
+static int sgl_seek_offset(struct scatterlist *sgl, unsigned int sgcnt,
+ unsigned int offset, unsigned int *off,
+ struct scatterlist **sgp)
+{
+ int i;
+ struct scatterlist *sg;
+
+ for_each_sg(sgl, sg, sgcnt, i) {
+ if (offset < sg->length) {
+ *off = offset;
+ *sgp = sg;
+ return 0;
+ }
+ offset -= sg->length;
+ }
+ return -EFAULT;
+}
+
+static int sgl_read_to_frags(struct scatterlist *sg, unsigned int sgoffset,
+ unsigned int dlen, skb_frag_t *frags,
+ int frag_max)
+{
+ unsigned int datalen = dlen;
+ unsigned int sglen = sg->length - sgoffset;
+ struct page *page = sg_page(sg);
+ int i;
+
+ i = 0;
+ do {
+ unsigned int copy;
+
+ if (!sglen) {
+ sg = sg_next(sg);
+ if (!sg) {
+ cxgb3i_log_error("%s, sg NULL, len %u/%u.\n",
+ __func__, datalen, dlen);
+ return -EINVAL;
+ }
+ sgoffset = 0;
+ sglen = sg->length;
+ page = sg_page(sg);
+
+ }
+ copy = min(datalen, sglen);
+ if (i && page == frags[i - 1].page &&
+ sgoffset + sg->offset ==
+ frags[i - 1].page_offset + frags[i - 1].size) {
+ frags[i - 1].size += copy;
+ } else {
+ if (i >= frag_max) {
+ cxgb3i_log_error("%s, too many pages %u, "
+ "dlen %u.\n", __func__,
+ frag_max, dlen);
+ return -EINVAL;
+ }
+
+ frags[i].page = page;
+ frags[i].page_offset = sg->offset + sgoffset;
+ frags[i].size = copy;
+ i++;
+ }
+ datalen -= copy;
+ sgoffset += copy;
+ sglen -= copy;
+ } while (datalen);
+
+ return i;
+}
+
int cxgb3i_conn_alloc_pdu(struct iscsi_task *task, u8 opcode)
{
+ struct iscsi_conn *conn = task->conn;
struct iscsi_tcp_task *tcp_task = task->dd_data;
- struct sk_buff *skb;
+ struct cxgb3i_task_data *tdata = task->dd_data + sizeof(*tcp_task);
+ struct scsi_cmnd *sc = task->sc;
+ int headroom = SKB_TX_PDU_HEADER_LEN;
+ tcp_task->dd_data = tdata;
task->hdr = NULL;
- /* always allocate rooms for AHS */
- skb = alloc_skb(sizeof(struct iscsi_hdr) + ISCSI_MAX_AHS_SIZE +
- TX_HEADER_LEN, GFP_ATOMIC);
- if (!skb)
+
+ /* write command, need to send data pdus */
+ if (skb_extra_headroom && (opcode == ISCSI_OP_SCSI_DATA_OUT ||
+ (opcode == ISCSI_OP_SCSI_CMD &&
+ (scsi_bidi_cmnd(sc) || sc->sc_data_direction == DMA_TO_DEVICE))))
+ headroom += min(skb_extra_headroom, conn->max_xmit_dlength);
+
+ tdata->skb = alloc_skb(TX_HEADER_LEN + headroom, GFP_ATOMIC);
+ if (!tdata->skb)
return -ENOMEM;
+ skb_reserve(tdata->skb, TX_HEADER_LEN);
cxgb3i_tx_debug("task 0x%p, opcode 0x%x, skb 0x%p.\n",
- task, opcode, skb);
+ task, opcode, tdata->skb);
- tcp_task->dd_data = skb;
- skb_reserve(skb, TX_HEADER_LEN);
- task->hdr = (struct iscsi_hdr *)skb->data;
- task->hdr_max = sizeof(struct iscsi_hdr);
+ task->hdr = (struct iscsi_hdr *)tdata->skb->data;
+ task->hdr_max = SKB_TX_PDU_HEADER_LEN;
/* data_out uses scsi_cmd's itt */
if (opcode != ISCSI_OP_SCSI_DATA_OUT)
int cxgb3i_conn_init_pdu(struct iscsi_task *task, unsigned int offset,
unsigned int count)
{
- struct iscsi_tcp_task *tcp_task = task->dd_data;
- struct sk_buff *skb = tcp_task->dd_data;
struct iscsi_conn *conn = task->conn;
- struct page *pg;
+ struct iscsi_tcp_task *tcp_task = task->dd_data;
+ struct cxgb3i_task_data *tdata = tcp_task->dd_data;
+ struct sk_buff *skb = tdata->skb;
unsigned int datalen = count;
int i, padlen = iscsi_padding(count);
- skb_frag_t *frag;
+ struct page *pg;
cxgb3i_tx_debug("task 0x%p,0x%p, offset %u, count %u, skb 0x%p.\n",
task, task->sc, offset, count, skb);
return 0;
if (task->sc) {
- struct scatterlist *sg;
- struct scsi_data_buffer *sdb;
- unsigned int sgoffset = offset;
- struct page *sgpg;
- unsigned int sglen;
-
- sdb = scsi_out(task->sc);
- sg = sdb->table.sgl;
-
- for_each_sg(sdb->table.sgl, sg, sdb->table.nents, i) {
- cxgb3i_tx_debug("sg %d, page 0x%p, len %u offset %u\n",
- i, sg_page(sg), sg->length, sg->offset);
-
- if (sgoffset < sg->length)
- break;
- sgoffset -= sg->length;
+ struct scsi_data_buffer *sdb = scsi_out(task->sc);
+ struct scatterlist *sg = NULL;
+ int err;
+
+ tdata->offset = offset;
+ tdata->count = count;
+ err = sgl_seek_offset(sdb->table.sgl, sdb->table.nents,
+ tdata->offset, &tdata->sgoffset, &sg);
+ if (err < 0) {
+ cxgb3i_log_warn("tpdu, sgl %u, bad offset %u/%u.\n",
+ sdb->table.nents, tdata->offset,
+ sdb->length);
+ return err;
}
- sgpg = sg_page(sg);
- sglen = sg->length - sgoffset;
-
- do {
- int j = skb_shinfo(skb)->nr_frags;
- unsigned int copy;
-
- if (!sglen) {
- sg = sg_next(sg);
- sgpg = sg_page(sg);
- sgoffset = 0;
- sglen = sg->length;
- ++i;
+ err = sgl_read_to_frags(sg, tdata->sgoffset, tdata->count,
+ tdata->frags, MAX_PDU_FRAGS);
+ if (err < 0) {
+ cxgb3i_log_warn("tpdu, sgl %u, bad offset %u + %u.\n",
+ sdb->table.nents, tdata->offset,
+ tdata->count);
+ return err;
+ }
+ tdata->nr_frags = err;
+
+ if (tdata->nr_frags > MAX_SKB_FRAGS ||
+ (padlen && tdata->nr_frags == MAX_SKB_FRAGS)) {
+ char *dst = skb->data + task->hdr_len;
+ skb_frag_t *frag = tdata->frags;
+
+ /* data fits in the skb's headroom */
+ for (i = 0; i < tdata->nr_frags; i++, frag++) {
+ char *src = kmap_atomic(frag->page,
+ KM_SOFTIRQ0);
+
+ memcpy(dst, src+frag->page_offset, frag->size);
+ dst += frag->size;
+ kunmap_atomic(src, KM_SOFTIRQ0);
}
- copy = min(sglen, datalen);
- if (j && skb_can_coalesce(skb, j, sgpg,
- sg->offset + sgoffset)) {
- skb_shinfo(skb)->frags[j - 1].size += copy;
- } else {
- get_page(sgpg);
- skb_fill_page_desc(skb, j, sgpg,
- sg->offset + sgoffset, copy);
+ if (padlen) {
+ memset(dst, 0, padlen);
+ padlen = 0;
}
- sgoffset += copy;
- sglen -= copy;
- datalen -= copy;
- } while (datalen);
+ skb_put(skb, count + padlen);
+ } else {
+ /* data fit into frag_list */
+ for (i = 0; i < tdata->nr_frags; i++)
+ get_page(tdata->frags[i].page);
+
+ memcpy(skb_shinfo(skb)->frags, tdata->frags,
+ sizeof(skb_frag_t) * tdata->nr_frags);
+ skb_shinfo(skb)->nr_frags = tdata->nr_frags;
+ skb->len += count;
+ skb->data_len += count;
+ skb->truesize += count;
+ }
+
} else {
pg = virt_to_page(task->data);
- while (datalen) {
- i = skb_shinfo(skb)->nr_frags;
- frag = &skb_shinfo(skb)->frags[i];
-
- get_page(pg);
- frag->page = pg;
- frag->page_offset = 0;
- frag->size = min((unsigned int)PAGE_SIZE, datalen);
-
- skb_shinfo(skb)->nr_frags++;
- datalen -= frag->size;
- pg++;
- }
+ get_page(pg);
+ skb_fill_page_desc(skb, 0, pg, offset_in_page(task->data),
+ count);
+ skb->len += count;
+ skb->data_len += count;
+ skb->truesize += count;
}
if (padlen) {
i = skb_shinfo(skb)->nr_frags;
- frag = &skb_shinfo(skb)->frags[i];
- frag->page = pad_page;
- frag->page_offset = 0;
- frag->size = padlen;
- skb_shinfo(skb)->nr_frags++;
+ get_page(pad_page);
+ skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags, pad_page, 0,
+ padlen);
+
+ skb->data_len += padlen;
+ skb->truesize += padlen;
+ skb->len += padlen;
}
- datalen = count + padlen;
- skb->data_len += datalen;
- skb->truesize += datalen;
- skb->len += datalen;
return 0;
}
int cxgb3i_conn_xmit_pdu(struct iscsi_task *task)
{
- struct iscsi_tcp_task *tcp_task = task->dd_data;
- struct sk_buff *skb = tcp_task->dd_data;
struct iscsi_tcp_conn *tcp_conn = task->conn->dd_data;
struct cxgb3i_conn *cconn = tcp_conn->dd_data;
+ struct iscsi_tcp_task *tcp_task = task->dd_data;
+ struct cxgb3i_task_data *tdata = tcp_task->dd_data;
+ struct sk_buff *skb = tdata->skb;
unsigned int datalen;
int err;
return 0;
datalen = skb->data_len;
- tcp_task->dd_data = NULL;
+ tdata->skb = NULL;
err = cxgb3i_c3cn_send_pdus(cconn->cep->c3cn, skb);
- cxgb3i_tx_debug("task 0x%p, skb 0x%p, len %u/%u, rv %d.\n",
- task, skb, skb->len, skb->data_len, err);
if (err > 0) {
int pdulen = err;
+ cxgb3i_tx_debug("task 0x%p, skb 0x%p, len %u/%u, rv %d.\n",
+ task, skb, skb->len, skb->data_len, err);
+
if (task->conn->hdrdgst_en)
pdulen += ISCSI_DIGEST_SIZE;
if (datalen && task->conn->datadgst_en)
return err;
}
/* reset skb to send when we are called again */
- tcp_task->dd_data = skb;
+ tdata->skb = skb;
return -EAGAIN;
}
int cxgb3i_pdu_init(void)
{
+ if (SKB_TX_HEADROOM > (512 * MAX_SKB_FRAGS))
+ skb_extra_headroom = SKB_TX_HEADROOM;
pad_page = alloc_page(GFP_KERNEL);
if (!pad_page)
return -ENOMEM;
skb = skb_peek(&c3cn->receive_queue);
while (!err && skb) {
__skb_unlink(skb, &c3cn->receive_queue);
- read += skb_ulp_pdulen(skb);
+ read += skb_rx_pdulen(skb);
+ cxgb3i_rx_debug("conn 0x%p, cn 0x%p, rx skb 0x%p, pdulen %u.\n",
+ conn, c3cn, skb, skb_rx_pdulen(skb));
err = cxgb3i_conn_read_pdu_skb(conn, skb);
__kfree_skb(skb);
skb = skb_peek(&c3cn->receive_queue);
cxgb3i_c3cn_rx_credits(c3cn, read);
}
conn->rxdata_octets += read;
+
+ if (err) {
+ cxgb3i_log_info("conn 0x%p rx failed err %d.\n", conn, err);
+ iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
+ }
}
void cxgb3i_conn_tx_open(struct s3_conn *c3cn)
#define ULP2_FLAG_DCRC_ERROR 0x20
#define ULP2_FLAG_PAD_ERROR 0x40
-void cxgb3i_conn_closing(struct s3_conn *);
+void cxgb3i_conn_closing(struct s3_conn *c3cn);
void cxgb3i_conn_pdu_ready(struct s3_conn *c3cn);
void cxgb3i_conn_tx_open(struct s3_conn *c3cn);
#endif
{ PCI_VDEVICE(TTI, 0x3530), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x3560), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x4322), (kernel_ulong_t)&hptiop_itl_ops },
+ { PCI_VDEVICE(TTI, 0x4321), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x4210), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x4211), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x4310), (kernel_ulong_t)&hptiop_itl_ops },
action = ACTION_FAIL;
break;
case ABORTED_COMMAND:
+ action = ACTION_FAIL;
if (sshdr.asc == 0x10) { /* DIF */
description = "Target Data Integrity Failure";
- action = ACTION_FAIL;
error = -EILSEQ;
- } else
- action = ACTION_RETRY;
+ }
break;
case NOT_READY:
/* If the device is in the process of becoming
static void sd_print_sense_hdr(struct scsi_disk *, struct scsi_sense_hdr *);
static void sd_print_result(struct scsi_disk *, int);
+static DEFINE_SPINLOCK(sd_index_lock);
static DEFINE_IDA(sd_index_ida);
/* This semaphore is used to mediate the 0->1 reference get in the
if (!ida_pre_get(&sd_index_ida, GFP_KERNEL))
goto out_put;
+ spin_lock(&sd_index_lock);
error = ida_get_new(&sd_index_ida, &index);
+ spin_unlock(&sd_index_lock);
} while (error == -EAGAIN);
if (error)
return 0;
out_free_index:
+ spin_lock(&sd_index_lock);
ida_remove(&sd_index_ida, index);
+ spin_unlock(&sd_index_lock);
out_put:
put_disk(gd);
out_free:
struct scsi_disk *sdkp = to_scsi_disk(dev);
struct gendisk *disk = sdkp->disk;
+ spin_lock(&sd_index_lock);
ida_remove(&sd_index_ida, sdkp->index);
+ spin_unlock(&sd_index_lock);
disk->private_data = NULL;
put_disk(disk);
* Initialisation
*/
-#ifdef CONFIG_PPC_PMAC
+#ifdef CONFIG_PPC_PMAC__disabled
static void aty128_early_resume(void *data)
{
struct aty128fb_par *par = data;
if (try_acquire_console_sem())
return;
+ pci_restore_state(par->pdev);
aty128_do_resume(par->pdev);
release_console_sem();
}
/* Indicate sleep capability */
if (par->chip_gen == rage_M3) {
pmac_call_feature(PMAC_FTR_DEVICE_CAN_WAKE, NULL, 0, 1);
+#if 0 /* Disable the early video resume hack for now as it's causing problems, among
+ * others we now rely on the PCI core restoring the config space for us, which
+ * isn't the case with that hack, and that code path causes various things to
+ * be called with interrupts off while they shouldn't. I'm leaving the code in
+ * as it can be useful for debugging purposes
+ */
pmac_set_early_video_resume(aty128_early_resume, par);
+#endif
}
/* Find default mode */
return rc;
}
-#ifdef CONFIG_PPC_OF
+#ifdef CONFIG_PPC_OF__disabled
static void radeonfb_early_resume(void *data)
{
struct radeonfb_info *rinfo = data;
rinfo->no_schedule = 1;
+ pci_restore_state(rinfo->pdev);
radeonfb_pci_resume(rinfo->pdev);
rinfo->no_schedule = 0;
}
*/
if (rinfo->pm_mode != radeon_pm_none) {
pmac_call_feature(PMAC_FTR_DEVICE_CAN_WAKE, rinfo->of_node, 0, 1);
+#if 0 /* Disable the early video resume hack for now as it's causing problems, among
+ * others we now rely on the PCI core restoring the config space for us, which
+ * isn't the case with that hack, and that code path causes various things to
+ * be called with interrupts off while they shouldn't. I'm leaving the code in
+ * as it can be useful for debugging purposes
+ */
pmac_set_early_video_resume(radeonfb_early_resume, rinfo);
+#endif
}
#if 0
struct i810fb_par *par = info->par;
int line_length, vidmem, mode_valid = 0, retval = 0;
u32 vyres = var->yres_virtual, vxres = var->xres_virtual;
+
/*
* Memory limit
*/
if (vidmem > par->fb.size) {
vyres = par->fb.size/line_length;
if (vyres < var->yres) {
- vyres = yres;
+ vyres = info->var.yres;
vxres = par->fb.size/vyres;
vxres /= var->bits_per_pixel >> 3;
line_length = get_line_length(par, vxres,
var->bits_per_pixel);
- vidmem = line_length * yres;
+ vidmem = line_length * info->var.yres;
if (vxres < var->xres) {
printk("i810fb: required video memory, "
"%d bytes, for %dx%d-%d (virtual) "
static struct platform_driver pxafb_driver = {
.probe = pxafb_probe,
- .remove = pxafb_remove,
+ .remove = __devexit_p(pxafb_remove),
.suspend = pxafb_suspend,
.resume = pxafb_resume,
.driver = {
{
struct sh_mobile_lcdc_chan *ch;
struct sh_mobile_lcdc_board_cfg *board_cfg;
- unsigned long tmp;
int k;
/* tell the board code to disable the panel */
if (board_cfg->display_off)
board_cfg->display_off(board_cfg->board_data);
- /* cleanup deferred io if SYS bus */
- tmp = ch->cfg.sys_bus_cfg.deferred_io_msec;
- if (ch->ldmt1r_value & (1 << 12) && tmp) {
+ /* cleanup deferred io if enabled */
+ if (ch->info.fbdefio) {
fb_deferred_io_cleanup(&ch->info);
ch->info.fbdefio = NULL;
}
bus_clk = 133; /* in MHz */
freq = fsl_get_sys_freq();
- if (freq > 0)
+ if (freq != -1)
bus_clk = freq;
/* Map devices registers into memory */
#include <linux/watchdog.h>
#include <linux/io.h>
#include <linux/uaccess.h>
+#include <mach/timex.h>
#include <mach/regs-timer.h>
#define WDT_DEFAULT_TIME 5 /* seconds */
#define WDT_EN 0x0010
#define WDT_VAL (TIMER_VIRT_BASE + 0x0024)
+#define ORION5X_TCLK 166666667
#define WDT_MAX_DURATION (0xffffffff / ORION5X_TCLK)
#define WDT_IN_USE 0
#define WDT_OK_TO_CLOSE 1
#include <asm/time.h>
#include <asm/mach-rc32434/integ.h>
-#define MAX_TIMEOUT 20
-#define RC32434_WDT_INTERVAL (15 * HZ)
-
-#define VERSION "0.2"
+#define VERSION "0.4"
static struct {
- struct completion stop;
- int running;
- struct timer_list timer;
- int queue;
- int default_ticks;
unsigned long inuse;
} rc32434_wdt_device;
static struct integ __iomem *wdt_reg;
-static int ticks = 100 * HZ;
static int expect_close;
-static int timeout;
+
+/* Board internal clock speed in Hz,
+ * the watchdog timer ticks at. */
+extern unsigned int idt_cpu_freq;
+
+/* translate wtcompare value to seconds and vice versa */
+#define WTCOMP2SEC(x) (x / idt_cpu_freq)
+#define SEC2WTCOMP(x) (x * idt_cpu_freq)
+
+/* Use a default timeout of 20s. This should be
+ * safe for CPU clock speeds up to 400MHz, as
+ * ((2 ^ 32) - 1) / (400MHz / 2) = 21s. */
+#define WATCHDOG_TIMEOUT 20
+
+static int timeout = WATCHDOG_TIMEOUT;
static int nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, int, 0);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+/* apply or and nand masks to data read from addr and write back */
+#define SET_BITS(addr, or, nand) \
+ writel((readl(&addr) | or) & ~nand, &addr)
static void rc32434_wdt_start(void)
{
- u32 val;
-
- if (!rc32434_wdt_device.inuse) {
- writel(0, &wdt_reg->wtcount);
+ u32 or, nand;
- val = RC32434_ERR_WRE;
- writel(readl(&wdt_reg->errcs) | val, &wdt_reg->errcs);
+ /* zero the counter before enabling */
+ writel(0, &wdt_reg->wtcount);
- val = RC32434_WTC_EN;
- writel(readl(&wdt_reg->wtc) | val, &wdt_reg->wtc);
- }
- rc32434_wdt_device.running++;
-}
+ /* don't generate a non-maskable interrupt,
+ * do a warm reset instead */
+ nand = 1 << RC32434_ERR_WNE;
+ or = 1 << RC32434_ERR_WRE;
-static void rc32434_wdt_stop(void)
-{
- u32 val;
+ /* reset the ERRCS timeout bit in case it's set */
+ nand |= 1 << RC32434_ERR_WTO;
- if (rc32434_wdt_device.running) {
+ SET_BITS(wdt_reg->errcs, or, nand);
- val = ~RC32434_WTC_EN;
- writel(readl(&wdt_reg->wtc) & val, &wdt_reg->wtc);
+ /* reset WTC timeout bit and enable WDT */
+ nand = 1 << RC32434_WTC_TO;
+ or = 1 << RC32434_WTC_EN;
- val = ~RC32434_ERR_WRE;
- writel(readl(&wdt_reg->errcs) & val, &wdt_reg->errcs);
+ SET_BITS(wdt_reg->wtc, or, nand);
+}
- rc32434_wdt_device.running = 0;
- }
+static void rc32434_wdt_stop(void)
+{
+ /* Disable WDT */
+ SET_BITS(wdt_reg->wtc, 0, 1 << RC32434_WTC_EN);
}
-static void rc32434_wdt_set(int new_timeout)
+static int rc32434_wdt_set(int new_timeout)
{
- u32 cmp = new_timeout * HZ;
- u32 state, val;
+ int max_to = WTCOMP2SEC((u32)-1);
+ if (new_timeout < 0 || new_timeout > max_to) {
+ printk(KERN_ERR KBUILD_MODNAME
+ ": timeout value must be between 0 and %d",
+ max_to);
+ return -EINVAL;
+ }
timeout = new_timeout;
- /*
- * store and disable WTC
- */
- state = (u32)(readl(&wdt_reg->wtc) & RC32434_WTC_EN);
- val = ~RC32434_WTC_EN;
- writel(readl(&wdt_reg->wtc) & val, &wdt_reg->wtc);
-
- writel(0, &wdt_reg->wtcount);
- writel(cmp, &wdt_reg->wtcompare);
-
- /*
- * restore WTC
- */
-
- writel(readl(&wdt_reg->wtc) | state, &wdt_reg);
-}
+ writel(SEC2WTCOMP(timeout), &wdt_reg->wtcompare);
-static void rc32434_wdt_reset(void)
-{
- ticks = rc32434_wdt_device.default_ticks;
+ return 0;
}
-static void rc32434_wdt_update(unsigned long unused)
+static void rc32434_wdt_ping(void)
{
- if (rc32434_wdt_device.running)
- ticks--;
-
writel(0, &wdt_reg->wtcount);
-
- if (rc32434_wdt_device.queue && ticks)
- mod_timer(&rc32434_wdt_device.timer,
- jiffies + RC32434_WDT_INTERVAL);
- else
- complete(&rc32434_wdt_device.stop);
}
static int rc32434_wdt_open(struct inode *inode, struct file *file)
if (nowayout)
__module_get(THIS_MODULE);
+ rc32434_wdt_start();
+ rc32434_wdt_ping();
+
return nonseekable_open(inode, file);
}
static int rc32434_wdt_release(struct inode *inode, struct file *file)
{
- if (expect_close && nowayout == 0) {
+ if (expect_close == 42) {
rc32434_wdt_stop();
printk(KERN_INFO KBUILD_MODNAME ": disabling watchdog timer\n");
module_put(THIS_MODULE);
- } else
+ } else {
printk(KERN_CRIT KBUILD_MODNAME
": device closed unexpectedly. WDT will not stop !\n");
-
+ rc32434_wdt_ping();
+ }
clear_bit(0, &rc32434_wdt_device.inuse);
return 0;
}
if (get_user(c, data + i))
return -EFAULT;
if (c == 'V')
- expect_close = 1;
+ expect_close = 42;
}
}
- rc32434_wdt_update(0);
+ rc32434_wdt_ping();
return len;
}
return 0;
};
switch (cmd) {
case WDIOC_KEEPALIVE:
- rc32434_wdt_reset();
+ rc32434_wdt_ping();
break;
case WDIOC_GETSTATUS:
case WDIOC_GETBOOTSTATUS:
- value = readl(&wdt_reg->wtcount);
+ value = 0;
if (copy_to_user(argp, &value, sizeof(int)))
return -EFAULT;
break;
break;
case WDIOS_DISABLECARD:
rc32434_wdt_stop();
+ break;
default:
return -EINVAL;
}
case WDIOC_SETTIMEOUT:
if (copy_from_user(&new_timeout, argp, sizeof(int)))
return -EFAULT;
- if (new_timeout < 1)
+ if (rc32434_wdt_set(new_timeout))
return -EINVAL;
- if (new_timeout > MAX_TIMEOUT)
- return -EINVAL;
- rc32434_wdt_set(new_timeout);
+ /* Fall through */
case WDIOC_GETTIMEOUT:
return copy_to_user(argp, &timeout, sizeof(int));
default:
.fops = &rc32434_wdt_fops,
};
-static char banner[] = KERN_INFO KBUILD_MODNAME
+static char banner[] __devinitdata = KERN_INFO KBUILD_MODNAME
": Watchdog Timer version " VERSION ", timer margin: %d sec\n";
-static int rc32434_wdt_probe(struct platform_device *pdev)
+static int __devinit rc32434_wdt_probe(struct platform_device *pdev)
{
int ret;
struct resource *r;
- r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rb500_wdt_res");
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rb532_wdt_res");
if (!r) {
printk(KERN_ERR KBUILD_MODNAME
"failed to retrieve resources\n");
}
ret = misc_register(&rc32434_wdt_miscdev);
-
if (ret < 0) {
printk(KERN_ERR KBUILD_MODNAME
"failed to register watchdog device\n");
goto unmap;
}
- init_completion(&rc32434_wdt_device.stop);
- rc32434_wdt_device.queue = 0;
-
- clear_bit(0, &rc32434_wdt_device.inuse);
-
- setup_timer(&rc32434_wdt_device.timer, rc32434_wdt_update, 0L);
-
- rc32434_wdt_device.default_ticks = ticks;
-
- rc32434_wdt_start();
-
printk(banner, timeout);
return 0;
return ret;
}
-static int rc32434_wdt_remove(struct platform_device *pdev)
+static int __devexit rc32434_wdt_remove(struct platform_device *pdev)
{
- if (rc32434_wdt_device.queue) {
- rc32434_wdt_device.queue = 0;
- wait_for_completion(&rc32434_wdt_device.stop);
- }
misc_deregister(&rc32434_wdt_miscdev);
-
iounmap(wdt_reg);
-
return 0;
}
static struct platform_driver rc32434_wdt = {
.probe = rc32434_wdt_probe,
- .remove = rc32434_wdt_remove,
- .driver = {
+ .remove = __devexit_p(rc32434_wdt_remove),
+ .driver = {
.name = "rc32434_wdt",
}
};
# Do not add any filesystems before this line
obj-$(CONFIG_REISERFS_FS) += reiserfs/
obj-$(CONFIG_EXT3_FS) += ext3/ # Before ext2 so root fs can be ext3
-obj-$(CONFIG_EXT4_FS) += ext4/ # Before ext2 so root fs can be ext4
+obj-$(CONFIG_EXT2_FS) += ext2/
+# We place ext4 after ext2 so plain ext2 root fs's are mounted using ext2
+# unless explicitly requested by rootfstype
+obj-$(CONFIG_EXT4_FS) += ext4/
obj-$(CONFIG_JBD) += jbd/
obj-$(CONFIG_JBD2) += jbd2/
-obj-$(CONFIG_EXT2_FS) += ext2/
obj-$(CONFIG_CRAMFS) += cramfs/
obj-$(CONFIG_SQUASHFS) += squashfs/
obj-y += ramfs/
if (*cow_ret == buf)
unlock_orig = 1;
- WARN_ON(!btrfs_tree_locked(buf));
+ btrfs_assert_tree_locked(buf);
if (parent)
parent_start = parent->start;
if (slot >= btrfs_header_nritems(upper) - 1)
return 1;
- WARN_ON(!btrfs_tree_locked(path->nodes[1]));
+ btrfs_assert_tree_locked(path->nodes[1]);
right = read_node_slot(root, upper, slot + 1);
btrfs_tree_lock(right);
if (right_nritems == 0)
return 1;
- WARN_ON(!btrfs_tree_locked(path->nodes[1]));
+ btrfs_assert_tree_locked(path->nodes[1]);
left = read_node_slot(root, path->nodes[1], slot - 1);
btrfs_tree_lock(left);
next = read_node_slot(root, c, slot);
if (!path->skip_locking) {
- WARN_ON(!btrfs_tree_locked(c));
+ btrfs_assert_tree_locked(c);
btrfs_tree_lock(next);
btrfs_set_lock_blocking(next);
}
reada_for_search(root, path, level, slot, 0);
next = read_node_slot(root, next, 0);
if (!path->skip_locking) {
- WARN_ON(!btrfs_tree_locked(path->nodes[level]));
+ btrfs_assert_tree_locked(path->nodes[level]);
btrfs_tree_lock(next);
btrfs_set_lock_blocking(next);
}
struct inode *btree_inode = root->fs_info->btree_inode;
if (btrfs_header_generation(buf) ==
root->fs_info->running_transaction->transid) {
- WARN_ON(!btrfs_tree_locked(buf));
+ btrfs_assert_tree_locked(buf);
/* ugh, clear_extent_buffer_dirty can be expensive */
btrfs_set_lock_blocking(buf);
btrfs_set_lock_blocking(buf);
- WARN_ON(!btrfs_tree_locked(buf));
+ btrfs_assert_tree_locked(buf);
if (transid != root->fs_info->generation) {
printk(KERN_CRIT "btrfs transid mismatch buffer %llu, "
"found %llu running %llu\n",
path = btrfs_alloc_path();
BUG_ON(!path);
- BUG_ON(!btrfs_tree_locked(parent));
+ btrfs_assert_tree_locked(parent);
parent_level = btrfs_header_level(parent);
extent_buffer_get(parent);
path->nodes[parent_level] = parent;
path->slots[parent_level] = btrfs_header_nritems(parent);
- BUG_ON(!btrfs_tree_locked(node));
+ btrfs_assert_tree_locked(node);
level = btrfs_header_level(node);
extent_buffer_get(node);
path->nodes[level] = node;
return 0;
}
-int btrfs_tree_locked(struct extent_buffer *eb)
+void btrfs_assert_tree_locked(struct extent_buffer *eb)
{
- return test_bit(EXTENT_BUFFER_BLOCKING, &eb->bflags) ||
- spin_is_locked(&eb->lock);
+ if (!test_bit(EXTENT_BUFFER_BLOCKING, &eb->bflags))
+ assert_spin_locked(&eb->lock);
}
int btrfs_tree_lock(struct extent_buffer *eb);
int btrfs_tree_unlock(struct extent_buffer *eb);
-int btrfs_tree_locked(struct extent_buffer *eb);
int btrfs_try_tree_lock(struct extent_buffer *eb);
int btrfs_try_spin_lock(struct extent_buffer *eb);
void btrfs_set_lock_blocking(struct extent_buffer *eb);
void btrfs_clear_lock_blocking(struct extent_buffer *eb);
+void btrfs_assert_tree_locked(struct extent_buffer *eb);
#endif
fsi->ptmx_dentry = dentry;
rc = 0;
-
- printk(KERN_DEBUG "Created ptmx node in devpts ino %lu\n",
- inode->i_ino);
out:
mutex_unlock(&root->d_inode->i_mutex);
return rc;
struct pts_fs_info *fsi;
struct pts_mount_opts *opts;
- printk(KERN_NOTICE "devpts: newinstance mount\n");
-
err = get_sb_nodev(fs_type, flags, data, devpts_fill_super, mnt);
if (err)
return err;
*/
int ext4_should_retry_alloc(struct super_block *sb, int *retries)
{
- if (!ext4_has_free_blocks(EXT4_SB(sb), 1) || (*retries)++ > 3)
+ if (!ext4_has_free_blocks(EXT4_SB(sb), 1) ||
+ (*retries)++ > 3 ||
+ !EXT4_SB(sb)->s_journal)
return 0;
jbd_debug(1, "%s: retrying operation after ENOSPC\n", sb->s_id);
struct ext4_group_desc *gdp;
struct ext4_super_block *es;
struct ext4_sb_info *sbi;
- int fatal = 0, err, count;
+ int fatal = 0, err, count, cleared;
ext4_group_t flex_group;
if (atomic_read(&inode->i_count) > 1) {
goto error_return;
/* Ok, now we can actually update the inode bitmaps.. */
- if (!ext4_clear_bit_atomic(sb_bgl_lock(sbi, block_group),
- bit, bitmap_bh->b_data))
+ spin_lock(sb_bgl_lock(sbi, block_group));
+ cleared = ext4_clear_bit(bit, bitmap_bh->b_data);
+ spin_unlock(sb_bgl_lock(sbi, block_group));
+ if (!cleared)
ext4_error(sb, "ext4_free_inode",
"bit already cleared for inode %lu", ino);
else {
ext4_journal_stop(handle);
- if (mpd.retval == -ENOSPC) {
+ if ((mpd.retval == -ENOSPC) && sbi->s_journal) {
/* commit the transaction which would
* free blocks released in the transaction
* and try again
/* Journal blocked and flushed, clear needs_recovery flag. */
EXT4_CLEAR_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER);
- ext4_commit_super(sb, EXT4_SB(sb)->s_es, 1);
error = ext4_commit_super(sb, EXT4_SB(sb)->s_es, 1);
if (error)
goto out;
sector_t blocknr;
/* fat_get_cluster() assumes the requested blocknr isn't truncated. */
- mutex_lock(&mapping->host->i_mutex);
+ down_read(&mapping->host->i_alloc_sem);
blocknr = generic_block_bmap(mapping, block, fat_get_block);
- mutex_unlock(&mapping->host->i_mutex);
+ up_read(&mapping->host->i_alloc_sem);
return blocknr;
}
#define KPF_RECLAIM 9
#define KPF_BUDDY 10
-#define kpf_copy_bit(flags, srcpos, dstpos) (((flags >> srcpos) & 1) << dstpos)
+#define kpf_copy_bit(flags, dstpos, srcpos) (((flags >> srcpos) & 1) << dstpos)
static ssize_t kpageflags_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
* generated a larger block - this does occasionally happen with zlib).
*/
int squashfs_read_data(struct super_block *sb, void **buffer, u64 index,
- int length, u64 *next_index, int srclength)
+ int length, u64 *next_index, int srclength, int pages)
{
struct squashfs_sb_info *msblk = sb->s_fs_info;
struct buffer_head **bh;
}
if (msblk->stream.avail_out == 0) {
+ if (page == pages) {
+ ERROR("zlib_inflate tried to "
+ "decompress too much data, "
+ "expected %d bytes. Zlib "
+ "data probably corrupt\n",
+ srclength);
+ goto release_mutex;
+ }
msblk->stream.next_out = buffer[page++];
msblk->stream.avail_out = PAGE_CACHE_SIZE;
}
put_bh(bh[k]);
read_failure:
- ERROR("sb_bread failed reading block 0x%llx\n", cur_index);
+ ERROR("squashfs_read_data failed to read block 0x%llx\n",
+ (unsigned long long) index);
kfree(bh);
return -EIO;
}
entry->length = squashfs_read_data(sb, entry->data,
block, length, &entry->next_index,
- cache->block_size);
+ cache->block_size, cache->pages);
spin_lock(&cache->lock);
for (i = 0; i < pages; i++, buffer += PAGE_CACHE_SIZE)
data[i] = buffer;
res = squashfs_read_data(sb, data, block, length |
- SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, length);
+ SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, length, pages);
kfree(data);
return res;
}
type = le16_to_cpu(sqshb_ino->inode_type);
switch (type) {
case SQUASHFS_REG_TYPE: {
- unsigned int frag_offset, frag_size, frag;
+ unsigned int frag_offset, frag;
+ int frag_size;
u64 frag_blk;
struct squashfs_reg_inode *sqsh_ino = &squashfs_ino.reg;
break;
}
case SQUASHFS_LREG_TYPE: {
- unsigned int frag_offset, frag_size, frag;
+ unsigned int frag_offset, frag;
+ int frag_size;
u64 frag_blk;
struct squashfs_lreg_inode *sqsh_ino = &squashfs_ino.lreg;
/* block.c */
extern int squashfs_read_data(struct super_block *, void **, u64, int, u64 *,
- int);
+ int, int);
/* cache.c */
extern struct squashfs_cache *squashfs_cache_init(char *, int, int);
return err;
}
- printk(KERN_INFO "squashfs: version 4.0 (2009/01/03) "
+ printk(KERN_INFO "squashfs: version 4.0 (2009/01/31) "
"Phillip Lougher\n");
return 0;
u8 hborder;
u8 vborder;
u8 unknown0:1;
- u8 vsync_positive:1;
u8 hsync_positive:1;
+ u8 vsync_positive:1;
u8 separate_sync:2;
u8 stereo:1;
u8 unknown6:1;
header-y += cgroupstats.h
header-y += cramfs_fs.h
header-y += cycx_cfm.h
+header-y += dcbnl.h
header-y += dlmconstants.h
header-y += dlm_device.h
header-y += dlm_netlink.h
ATA_ID_DLF = 128,
ATA_ID_CSFO = 129,
ATA_ID_CFA_POWER = 160,
+ ATA_ID_CFA_KEY_MGMT = 162,
+ ATA_ID_CFA_MODES = 163,
ATA_ID_ROT_SPEED = 217,
ATA_ID_PIO4 = (1 << 1),
int (*suspend) (struct cpufreq_policy *policy, pm_message_t pmsg);
int (*resume) (struct cpufreq_policy *policy);
struct freq_attr **attr;
- bool hide_interface;
};
/* flags */
#ifndef __LINUX_DCBNL_H__
#define __LINUX_DCBNL_H__
+#include <linux/types.h>
+
#define DCB_PROTO_VERSION 1
struct dcbmsg {
- unsigned char dcb_family;
+ __u8 dcb_family;
__u8 cmd;
__u16 dcb_pad;
};
/**
* struct dma_chan_percpu - the per-CPU part of struct dma_chan
- * @refcount: local_t used for open-coded "bigref" counting
* @memcpy_count: transaction counter
* @bytes_transferred: byte counter
*/
* @cookie: last cookie value returned to client
* @chan_id: channel ID for sysfs
* @dev: class device for sysfs
- * @refcount: kref, used in "bigref" slow-mode
- * @slow_ref: indicates that the DMA channel is free
- * @rcu: the DMA channel's RCU head
* @device_node: used to add this to the device chan list
* @local: per-cpu pointer to a struct dma_chan_percpu
* @client-count: how many clients are using this channel
* @global_node: list_head for global dma_device_list
* @cap_mask: one or more dma_capability flags
* @max_xor: maximum number of xor sources, 0 if no capability
- * @refcount: reference count
- * @done: IO completion struct
* @dev_id: unique device ID
* @dev: struct device reference for dma mapping api
* @device_alloc_chan_resources: allocate resources and return the
* @device_prep_dma_interrupt: prepares an end of chain interrupt operation
* @device_prep_slave_sg: prepares a slave dma operation
* @device_terminate_all: terminate all pending operations
+ * @device_is_tx_complete: poll for transaction completion
* @device_issue_pending: push pending transactions to hardware
*/
struct dma_device {
unsigned short words69_70[2]; /* reserved words 69-70
* future command overlap and queuing
*/
- /* HDIO_GET_IDENTITY currently returns only words 0 through 70 */
unsigned short words71_74[4]; /* reserved words 71-74
* for IDENTIFY PACKET DEVICE command
*/
unsigned int n_ports;
struct device *dev[2];
unsigned int (*init_chipset)(struct pci_dev *);
+ irq_handler_t irq_handler;
unsigned long host_flags;
void *host_priv;
ide_hwif_t *cur_port; /* for hosts requiring serialization */
static inline void *
io_mapping_map_wc(struct io_mapping *mapping, unsigned long offset)
{
+ resource_size_t phys_addr;
+
BUG_ON(offset >= mapping->size);
- resource_size_t phys_addr = mapping->base + offset;
+ phys_addr = mapping->base + offset;
+
return ioremap_wc(phys_addr, PAGE_SIZE);
}
* advised to wait only for the following duration before
* doing SRST.
*/
- ATA_TMOUT_PMP_SRST_WAIT = 1000,
+ ATA_TMOUT_PMP_SRST_WAIT = 5000,
/* ATA bus states */
BUS_UNKNOWN = 0,
unsigned long flags; /* ATA_QCFLAG_xxx */
unsigned int tag;
unsigned int n_elem;
+ unsigned int orig_n_elem;
int dma_dir;
acpi_handle acpi_handle;
struct ata_acpi_gtm __acpi_init_gtm; /* use ata_acpi_init_gtm() */
#endif
- u8 sector_buf[ATA_SECT_SIZE]; /* owned by EH */
+ /* owned by EH */
+ u8 sector_buf[ATA_SECT_SIZE] ____cacheline_aligned;
};
/* The following initializer overrides a method to NULL whether one of
extern int register_netdevice_notifier(struct notifier_block *nb);
extern int unregister_netdevice_notifier(struct notifier_block *nb);
extern int init_dummy_netdev(struct net_device *dev);
+extern void netdev_resync_ops(struct net_device *dev);
extern int call_netdevice_notifiers(unsigned long val, struct net_device *dev);
extern struct net_device *dev_get_by_index(struct net *net, int ifindex);
#define _XT_NFLOG_TARGET
#define XT_NFLOG_DEFAULT_GROUP 0x1
-#define XT_NFLOG_DEFAULT_THRESHOLD 1
+#define XT_NFLOG_DEFAULT_THRESHOLD 0
#define XT_NFLOG_MASK 0x0
#define rcu_enter_nohz() do { } while (0)
#define rcu_exit_nohz() do { } while (0)
+/* A context switch is a grace period for rcuclassic. */
+static inline int rcu_blocking_is_gp(void)
+{
+ return num_online_cpus() == 1;
+}
+
#endif /* __LINUX_RCUCLASSIC_H */
void (*func)(struct rcu_head *head);
};
+/* Internal to kernel, but needed by rcupreempt.h. */
+extern int rcu_scheduler_active;
+
#if defined(CONFIG_CLASSIC_RCU)
#include <linux/rcuclassic.h>
#elif defined(CONFIG_TREE_RCU)
/* Internal to kernel */
extern void rcu_init(void);
+extern void rcu_scheduler_starting(void);
extern int rcu_needs_cpu(int cpu);
#endif /* __LINUX_RCUPDATE_H */
#define rcu_exit_nohz() do { } while (0)
#endif /* CONFIG_NO_HZ */
+/*
+ * A context switch is a grace period for rcupreempt synchronize_rcu()
+ * only during early boot, before the scheduler has been initialized.
+ * So, how the heck do we get a context switch? Well, if the caller
+ * invokes synchronize_rcu(), they are willing to accept a context
+ * switch, so we simply pretend that one happened.
+ *
+ * After boot, there might be a blocked or preempted task in an RCU
+ * read-side critical section, so we cannot then take the fastpath.
+ */
+static inline int rcu_blocking_is_gp(void)
+{
+ return num_online_cpus() == 1 && !rcu_scheduler_active;
+}
+
#endif /* __LINUX_RCUPREEMPT_H */
}
#endif /* CONFIG_NO_HZ */
+/* A context switch is a grace period for rcutree. */
+static inline int rcu_blocking_is_gp(void)
+{
+ return num_online_cpus() == 1;
+}
+
#endif /* __LINUX_RCUTREE_H */
extern int sched_group_set_rt_period(struct task_group *tg,
long rt_period_us);
extern long sched_group_rt_period(struct task_group *tg);
+extern int sched_rt_can_attach(struct task_group *tg, struct task_struct *tsk);
#endif
#endif
+extern int task_can_switch_user(struct user_struct *up,
+ struct task_struct *tsk);
+
#ifdef CONFIG_TASK_XACCT
static inline void add_rchar(struct task_struct *tsk, ssize_t amt)
{
#define SERIO_FUJITSU 0x35
#define SERIO_ZHENHUA 0x36
#define SERIO_INEXIO 0x37
-#define SERIO_TOUCHIT213 0x37
+#define SERIO_TOUCHIT213 0x38
#define SERIO_W8001 0x39
#endif
#ifdef CONFIG_NET_NS
extern void __put_net(struct net *net);
-static inline int net_alive(struct net *net)
-{
- return net && atomic_read(&net->count);
-}
-
static inline struct net *get_net(struct net *net)
{
atomic_inc(&net->count);
}
#else
-static inline int net_alive(struct net *net)
-{
- return 1;
-}
-
static inline struct net *get_net(struct net *net)
{
return net;
void (*exit)(struct net *net);
};
+/*
+ * Use these carefully. If you implement a network device and it
+ * needs per network namespace operations use device pernet operations,
+ * otherwise use pernet subsys operations.
+ *
+ * This is critically important. Most of the network code cleanup
+ * runs with the assumption that dev_remove_pack has been called so no
+ * new packets will arrive during and after the cleanup functions have
+ * been called. dev_remove_pack is not per namespace so instead the
+ * guarantee of no more packets arriving in a network namespace is
+ * provided by ensuring that all network devices and all sockets have
+ * left the network namespace before the cleanup methods are called.
+ *
+ * For the longest time the ipv4 icmp code was registered as a pernet
+ * device which caused kernel oops, and panics during network
+ * namespace cleanup. So please don't get this wrong.
+ */
extern int register_pernet_subsys(struct pernet_operations *);
extern void unregister_pernet_subsys(struct pernet_operations *);
extern int register_pernet_gen_subsys(int *id, struct pernet_operations *);
struct nf_conn *ct = (struct nf_conn *)skb->nfct;
int ret = NF_ACCEPT;
- if (ct) {
+ if (ct && ct != &nf_conntrack_untracked) {
if (!nf_ct_is_confirmed(ct) && !nf_ct_is_dying(ct))
ret = __nf_conntrack_confirm(skb);
nf_ct_deliver_cached_events(ct);
config SYSCTL
bool
+config ANON_INODES
+ bool
+
menuconfig EMBEDDED
bool "Configure standard kernel features (for small systems)"
help
This option allows to disable the internal PC-Speaker
support, saving some memory.
-config COMPAT_BRK
- bool "Disable heap randomization"
- default y
- help
- Randomizing heap placement makes heap exploits harder, but it
- also breaks ancient binaries (including anything libc5 based).
- This option changes the bootup default to heap randomization
- disabled, and can be overriden runtime by setting
- /proc/sys/kernel/randomize_va_space to 2.
-
- On non-ancient distros (post-2000 ones) N is usually a safe choice.
-
config BASE_FULL
default y
bool "Enable full-sized data structures for core" if EMBEDDED
support for "fast userspace mutexes". The resulting kernel may not
run glibc-based applications correctly.
-config ANON_INODES
- bool
-
config EPOLL
bool "Enable eventpoll support" if EMBEDDED
default y
SLUB sysfs support. /sys/slab will not exist and there will be
no support for cache validation etc.
+config COMPAT_BRK
+ bool "Disable heap randomization"
+ default y
+ help
+ Randomizing heap placement makes heap exploits harder, but it
+ also breaks ancient binaries (including anything libc5 based).
+ This option changes the bootup default to heap randomization
+ disabled, and can be overriden runtime by setting
+ /proc/sys/kernel/randomize_va_space to 2.
+
+ On non-ancient distros (post-2000 ones) N is usually a safe choice.
+
choice
prompt "Choose SLAB allocator"
default SLUB
extern void tc_init(void);
#endif
-enum system_states system_state;
+enum system_states system_state __read_mostly;
EXPORT_SYMBOL(system_state);
/*
* at least once to get things moving:
*/
init_idle_bootup_task(current);
+ rcu_scheduler_starting();
preempt_enable_no_resched();
schedule();
preempt_disable();
#endif
clear_all_latency_tracing(p);
- /* Our parent execution domain becomes current domain
- These must match for thread signalling to apply */
- p->parent_exec_id = p->self_exec_id;
-
/* ok, now we should be set up.. */
p->exit_signal = (clone_flags & CLONE_THREAD) ? -1 : (clone_flags & CSIGNAL);
p->pdeath_signal = 0;
set_task_cpu(p, smp_processor_id());
/* CLONE_PARENT re-uses the old parent */
- if (clone_flags & (CLONE_PARENT|CLONE_THREAD))
+ if (clone_flags & (CLONE_PARENT|CLONE_THREAD)) {
p->real_parent = current->real_parent;
- else
+ p->parent_exec_id = current->parent_exec_id;
+ } else {
p->real_parent = current;
+ p->parent_exec_id = current->self_exec_id;
+ }
spin_lock(¤t->sighand->siglock);
void rcu_check_callbacks(int cpu, int user)
{
if (user ||
- (idle_cpu(cpu) && !in_softirq() &&
- hardirq_count() <= (1 << HARDIRQ_SHIFT))) {
+ (idle_cpu(cpu) && rcu_scheduler_active &&
+ !in_softirq() && hardirq_count() <= (1 << HARDIRQ_SHIFT))) {
/*
* Get here if this CPU took its interrupt from user
#include <linux/cpu.h>
#include <linux/mutex.h>
#include <linux/module.h>
+#include <linux/kernel_stat.h>
enum rcu_barrier {
RCU_BARRIER_STD,
static atomic_t rcu_barrier_cpu_count;
static DEFINE_MUTEX(rcu_barrier_mutex);
static struct completion rcu_barrier_completion;
+int rcu_scheduler_active __read_mostly;
/*
* Awaken the corresponding synchronize_rcu() instance now that a
void synchronize_rcu(void)
{
struct rcu_synchronize rcu;
+
+ if (rcu_blocking_is_gp())
+ return;
+
init_completion(&rcu.completion);
/* Will wake me after RCU finished. */
call_rcu(&rcu.head, wakeme_after_rcu);
__rcu_init();
}
+void rcu_scheduler_starting(void)
+{
+ WARN_ON(num_online_cpus() != 1);
+ WARN_ON(nr_context_switches() > 0);
+ rcu_scheduler_active = 1;
+}
{
struct rcu_synchronize rcu;
+ if (num_online_cpus() == 1)
+ return; /* blocking is gp if only one CPU! */
+
init_completion(&rcu.completion);
/* Will wake me after RCU finished. */
call_rcu_sched(&rcu.head, wakeme_after_rcu);
void rcu_check_callbacks(int cpu, int user)
{
if (user ||
- (idle_cpu(cpu) && !in_softirq() &&
- hardirq_count() <= (1 << HARDIRQ_SHIFT))) {
+ (idle_cpu(cpu) && rcu_scheduler_active &&
+ !in_softirq() && hardirq_count() <= (1 << HARDIRQ_SHIFT))) {
/*
* Get here if this CPU took its interrupt from user
{
ktime_t now;
- if (rt_bandwidth_enabled() && rt_b->rt_runtime == RUNTIME_INF)
+ if (!rt_bandwidth_enabled() || rt_b->rt_runtime == RUNTIME_INF)
return;
if (hrtimer_active(&rt_b->rt_period_timer))
return ret;
}
+
+int sched_rt_can_attach(struct task_group *tg, struct task_struct *tsk)
+{
+ /* Don't accept realtime tasks when there is no way for them to run */
+ if (rt_task(tsk) && tg->rt_bandwidth.rt_runtime == 0)
+ return 0;
+
+ return 1;
+}
+
#else /* !CONFIG_RT_GROUP_SCHED */
static int sched_rt_global_constraints(void)
{
struct task_struct *tsk)
{
#ifdef CONFIG_RT_GROUP_SCHED
- /* Don't accept realtime tasks when there is no way for them to run */
- if (rt_task(tsk) && cgroup_tg(cgrp)->rt_bandwidth.rt_runtime == 0)
+ if (!sched_rt_can_attach(cgroup_tg(cgrp), tsk))
return -EINVAL;
#else
/* We don't support RT-tasks being in separate groups */
#include <linux/seccomp.h>
#include <linux/sched.h>
+#include <linux/compat.h>
/* #define SECCOMP_DEBUG 1 */
#define NR_SECCOMP_MODES 1
0, /* null terminated */
};
-#ifdef TIF_32BIT
+#ifdef CONFIG_COMPAT
static int mode1_syscalls_32[] = {
__NR_seccomp_read_32, __NR_seccomp_write_32, __NR_seccomp_exit_32, __NR_seccomp_sigreturn_32,
0, /* null terminated */
switch (mode) {
case 1:
syscall = mode1_syscalls;
-#ifdef TIF_32BIT
- if (test_thread_flag(TIF_32BIT))
+#ifdef CONFIG_COMPAT
+ if (is_compat_task())
syscall = mode1_syscalls_32;
#endif
do {
preempt_enable_no_resched();
cond_resched();
preempt_disable();
+ rcu_qsctr_inc((long)__bind_cpu);
}
preempt_enable();
set_current_state(TASK_INTERRUPTIBLE);
abort_creds(new);
return retval;
}
-
+
/*
* change the user struct in a credentials set to match the new UID
*/
if (!new_user)
return -EAGAIN;
+ if (!task_can_switch_user(new_user, current)) {
+ free_uid(new_user);
+ return -EINVAL;
+ }
+
if (atomic_read(&new_user->processes) >=
current->signal->rlim[RLIMIT_NPROC].rlim_cur &&
new_user != INIT_USER) {
goto error;
}
- retval = -EAGAIN;
- if (new->uid != old->uid && set_user(new) < 0)
- goto error;
-
+ if (new->uid != old->uid) {
+ retval = set_user(new);
+ if (retval < 0)
+ goto error;
+ }
if (ruid != (uid_t) -1 ||
(euid != (uid_t) -1 && euid != old->uid))
new->suid = new->euid;
retval = -EPERM;
if (capable(CAP_SETUID)) {
new->suid = new->uid = uid;
- if (uid != old->uid && set_user(new) < 0) {
- retval = -EAGAIN;
- goto error;
+ if (uid != old->uid) {
+ retval = set_user(new);
+ if (retval < 0)
+ goto error;
}
} else if (uid != old->uid && uid != new->suid) {
goto error;
goto error;
}
- retval = -EAGAIN;
if (ruid != (uid_t) -1) {
new->uid = ruid;
- if (ruid != old->uid && set_user(new) < 0)
- goto error;
+ if (ruid != old->uid) {
+ retval = set_user(new);
+ if (retval < 0)
+ goto error;
+ }
}
if (euid != (uid_t) -1)
new->euid = euid;
if (likely(tsk->mm)) {
cputime_t time, dtime;
struct timeval value;
+ unsigned long flags;
u64 delta;
+ local_irq_save(flags);
time = tsk->stime + tsk->utime;
dtime = cputime_sub(time, tsk->acct_timexpd);
jiffies_to_timeval(cputime_to_jiffies(dtime), &value);
delta = delta * USEC_PER_SEC + value.tv_usec;
if (delta == 0)
- return;
+ goto out;
tsk->acct_timexpd = time;
tsk->acct_rss_mem1 += delta * get_mm_rss(tsk->mm);
tsk->acct_vm_mem1 += delta * tsk->mm->total_vm;
+ out:
+ local_irq_restore(flags);
}
}
/* work function to remove sysfs directory for a user and free up
* corresponding structures.
*/
-static void remove_user_sysfs_dir(struct work_struct *w)
+static void cleanup_user_struct(struct work_struct *w)
{
struct user_struct *up = container_of(w, struct user_struct, work);
unsigned long flags;
int remove_user = 0;
- if (up->user_ns != &init_user_ns)
- return;
/* Make uid_hash_remove() + sysfs_remove_file() + kobject_del()
* atomic.
*/
if (!remove_user)
goto done;
- kobject_uevent(&up->kobj, KOBJ_REMOVE);
- kobject_del(&up->kobj);
- kobject_put(&up->kobj);
+ if (up->user_ns == &init_user_ns) {
+ kobject_uevent(&up->kobj, KOBJ_REMOVE);
+ kobject_del(&up->kobj);
+ kobject_put(&up->kobj);
+ }
sched_destroy_user(up);
key_put(up->uid_keyring);
atomic_inc(&up->__count);
spin_unlock_irqrestore(&uidhash_lock, flags);
- INIT_WORK(&up->work, remove_user_sysfs_dir);
+ INIT_WORK(&up->work, cleanup_user_struct);
schedule_work(&up->work);
}
#endif
+#if defined(CONFIG_RT_GROUP_SCHED) && defined(CONFIG_USER_SCHED)
+/*
+ * We need to check if a setuid can take place. This function should be called
+ * before successfully completing the setuid.
+ */
+int task_can_switch_user(struct user_struct *up, struct task_struct *tsk)
+{
+
+ return sched_rt_can_attach(up->tg, tsk);
+
+}
+#else
+int task_can_switch_user(struct user_struct *up, struct task_struct *tsk)
+{
+ return 1;
+}
+#endif
+
/*
* Locate the user_struct for the passed UID. If found, take a ref on it. The
* caller must undo that ref with free_uid().
n = idp->layers * IDR_BITS;
p = idp->top;
+ rcu_assign_pointer(idp->top, NULL);
max = 1 << n;
id = 0;
p = *--paa;
}
}
- rcu_assign_pointer(idp->top, NULL);
idp->layers = 0;
}
EXPORT_SYMBOL(idr_remove_all);
EXPORT_SYMBOL(tr_type_trans);
EXPORT_SYMBOL(alloc_trdev);
+
+MODULE_LICENSE("GPL");
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/if_vlan.h>
+#include <linux/netpoll.h>
#include "vlan.h"
/* VLAN rx hw acceleration helper. This acts like netif_{rx,receive_skb}(). */
int __vlan_hwaccel_rx(struct sk_buff *skb, struct vlan_group *grp,
u16 vlan_tci, int polling)
{
+ if (netpoll_rx(skb))
+ return NET_RX_DROP;
+
if (skb_bond_should_drop(skb))
goto drop;
{
int err = NET_RX_SUCCESS;
+ if (netpoll_receive_skb(skb))
+ return NET_RX_DROP;
+
switch (vlan_gro_common(napi, grp, vlan_tci, skb)) {
case -1:
return netif_receive_skb(skb);
if (!skb)
goto out;
+ if (netpoll_receive_skb(skb))
+ goto out;
+
err = NET_RX_SUCCESS;
switch (vlan_gro_common(napi, grp, vlan_tci, skb)) {
int err = 0;
if (netif_device_present(real_dev) && ops->ndo_neigh_setup)
- err = ops->ndo_neigh_setup(dev, pa);
+ err = ops->ndo_neigh_setup(real_dev, pa);
return err;
}
dev->hard_header_len = real_dev->hard_header_len + VLAN_HLEN;
dev->netdev_ops = &vlan_netdev_ops;
}
+ netdev_resync_ops(dev);
if (is_vlan_dev(real_dev))
subclass = 1;
rcu_read_lock();
- /* Don't receive packets in an exiting network namespace */
- if (!net_alive(dev_net(skb->dev))) {
- kfree_skb(skb);
- goto out;
- }
-
#ifdef CONFIG_NET_CLS_ACT
if (skb->tc_verd & TC_NCLS) {
skb->tc_verd = CLR_TC_NCLS(skb->tc_verd);
int napi_gro_receive(struct napi_struct *napi, struct sk_buff *skb)
{
+ if (netpoll_receive_skb(skb))
+ return NET_RX_DROP;
+
switch (__napi_gro_receive(napi, skb)) {
case -1:
return netif_receive_skb(skb);
if (!skb)
goto out;
+ if (netpoll_receive_skb(skb))
+ goto out;
+
err = NET_RX_SUCCESS;
switch (__napi_gro_receive(napi, skb)) {
}
EXPORT_SYMBOL(netdev_fix_features);
+/* Some devices need to (re-)set their netdev_ops inside
+ * ->init() or similar. If that happens, we have to setup
+ * the compat pointers again.
+ */
+void netdev_resync_ops(struct net_device *dev)
+{
+#ifdef CONFIG_COMPAT_NET_DEV_OPS
+ const struct net_device_ops *ops = dev->netdev_ops;
+
+ dev->init = ops->ndo_init;
+ dev->uninit = ops->ndo_uninit;
+ dev->open = ops->ndo_open;
+ dev->change_rx_flags = ops->ndo_change_rx_flags;
+ dev->set_rx_mode = ops->ndo_set_rx_mode;
+ dev->set_multicast_list = ops->ndo_set_multicast_list;
+ dev->set_mac_address = ops->ndo_set_mac_address;
+ dev->validate_addr = ops->ndo_validate_addr;
+ dev->do_ioctl = ops->ndo_do_ioctl;
+ dev->set_config = ops->ndo_set_config;
+ dev->change_mtu = ops->ndo_change_mtu;
+ dev->neigh_setup = ops->ndo_neigh_setup;
+ dev->tx_timeout = ops->ndo_tx_timeout;
+ dev->get_stats = ops->ndo_get_stats;
+ dev->vlan_rx_register = ops->ndo_vlan_rx_register;
+ dev->vlan_rx_add_vid = ops->ndo_vlan_rx_add_vid;
+ dev->vlan_rx_kill_vid = ops->ndo_vlan_rx_kill_vid;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = ops->ndo_poll_controller;
+#endif
+#endif
+}
+EXPORT_SYMBOL(netdev_resync_ops);
+
/**
* register_netdevice - register a network device
* @dev: device to register
* This is temporary until all network devices are converted.
*/
if (dev->netdev_ops) {
- const struct net_device_ops *ops = dev->netdev_ops;
-
- dev->init = ops->ndo_init;
- dev->uninit = ops->ndo_uninit;
- dev->open = ops->ndo_open;
- dev->change_rx_flags = ops->ndo_change_rx_flags;
- dev->set_rx_mode = ops->ndo_set_rx_mode;
- dev->set_multicast_list = ops->ndo_set_multicast_list;
- dev->set_mac_address = ops->ndo_set_mac_address;
- dev->validate_addr = ops->ndo_validate_addr;
- dev->do_ioctl = ops->ndo_do_ioctl;
- dev->set_config = ops->ndo_set_config;
- dev->change_mtu = ops->ndo_change_mtu;
- dev->tx_timeout = ops->ndo_tx_timeout;
- dev->get_stats = ops->ndo_get_stats;
- dev->vlan_rx_register = ops->ndo_vlan_rx_register;
- dev->vlan_rx_add_vid = ops->ndo_vlan_rx_add_vid;
- dev->vlan_rx_kill_vid = ops->ndo_vlan_rx_kill_vid;
-#ifdef CONFIG_NET_POLL_CONTROLLER
- dev->poll_controller = ops->ndo_poll_controller;
-#endif
+ netdev_resync_ops(dev);
} else {
char drivername[64];
pr_info("%s (%s): not using net_device_ops yet\n",
if (endp == buf)
goto err;
- rtnl_lock();
+ if (!rtnl_trylock())
+ return -ERESTARTSYS;
+
if (dev_isalive(net)) {
if ((ret = (*set)(net, new)) == 0)
ret = len;
struct pernet_operations *ops;
struct net *net;
- /* Be very certain incoming network packets will not find us */
- rcu_barrier();
-
net = container_of(work, struct net, work);
mutex_lock(&net_mutex);
int __init icmp_init(void)
{
- return register_pernet_device(&icmp_sk_ops);
+ return register_pernet_subsys(&icmp_sk_ops);
}
EXPORT_SYMBOL(icmp_err_convert);
static int tcp_shifted_skb(struct sock *sk, struct sk_buff *skb,
struct tcp_sacktag_state *state,
- unsigned int pcount, int shifted, int mss)
+ unsigned int pcount, int shifted, int mss,
+ int dup_sack)
{
struct tcp_sock *tp = tcp_sk(sk);
struct sk_buff *prev = tcp_write_queue_prev(sk, skb);
}
/* We discard results */
- tcp_sacktag_one(skb, sk, state, 0, pcount);
+ tcp_sacktag_one(skb, sk, state, dup_sack, pcount);
/* Difference in this won't matter, both ACKed by the same cumul. ACK */
TCP_SKB_CB(prev)->sacked |= (TCP_SKB_CB(skb)->sacked & TCPCB_EVER_RETRANS);
if (!skb_shift(prev, skb, len))
goto fallback;
- if (!tcp_shifted_skb(sk, skb, state, pcount, len, mss))
+ if (!tcp_shifted_skb(sk, skb, state, pcount, len, mss, dup_sack))
goto out;
/* Hole filled allows collapsing with the next as well, this is very
len = skb->len;
if (skb_shift(prev, skb, len)) {
pcount += tcp_skb_pcount(skb);
- tcp_shifted_skb(sk, skb, state, tcp_skb_pcount(skb), len, mss);
+ tcp_shifted_skb(sk, skb, state, tcp_skb_pcount(skb), len, mss, 0);
}
out:
void __init tcp_v4_init(void)
{
inet_hashinfo_init(&tcp_hashinfo);
- if (register_pernet_device(&tcp_sk_ops))
+ if (register_pernet_subsys(&tcp_sk_ops))
panic("Failed to create the TCP control socket.\n");
}
/* Tom Kelly's Scalable TCP
*
- * See htt://www-lce.eng.cam.ac.uk/~ctk21/scalable/
+ * See http://www.deneholme.net/tom/scalable/
*
* John Heffner <jheffner@sc.edu>
*/
read_unlock(&dev_base_lock);
}
-static void addrconf_fixup_forwarding(struct ctl_table *table, int *p, int old)
+static int addrconf_fixup_forwarding(struct ctl_table *table, int *p, int old)
{
struct net *net;
net = (struct net *)table->extra2;
if (p == &net->ipv6.devconf_dflt->forwarding)
- return;
+ return 0;
+
+ if (!rtnl_trylock())
+ return -ERESTARTSYS;
- rtnl_lock();
if (p == &net->ipv6.devconf_all->forwarding) {
__s32 newf = net->ipv6.devconf_all->forwarding;
net->ipv6.devconf_dflt->forwarding = newf;
if (*p)
rt6_purge_dflt_routers(net);
+ return 1;
}
#endif
ASSERT_RTNL();
- if ((dev->flags & IFF_LOOPBACK) && how == 1)
- how = 0;
-
rt6_ifdown(net, dev);
neigh_ifdown(&nd_tbl, dev);
ret = proc_dointvec(ctl, write, filp, buffer, lenp, ppos);
if (write)
- addrconf_fixup_forwarding(ctl, valp, val);
+ ret = addrconf_fixup_forwarding(ctl, valp, val);
return ret;
}
}
*valp = new;
- addrconf_fixup_forwarding(table, valp, val);
- return 1;
+ return addrconf_fixup_forwarding(table, valp, val);
}
static struct addrconf_sysctl_table
EXPORT_SYMBOL(unregister_inet6addr_notifier);
-static void addrconf_net_exit(struct net *net)
-{
- struct net_device *dev;
-
- rtnl_lock();
- /* clean dev list */
- for_each_netdev(net, dev) {
- if (__in6_dev_get(dev) == NULL)
- continue;
- addrconf_ifdown(dev, 1);
- }
- addrconf_ifdown(net->loopback_dev, 2);
- rtnl_unlock();
-}
-
-static struct pernet_operations addrconf_net_ops = {
- .exit = addrconf_net_exit,
-};
-
/*
* Init / cleanup code
*/
if (err)
goto errlo;
- err = register_pernet_device(&addrconf_net_ops);
- if (err)
- return err;
-
register_netdevice_notifier(&ipv6_dev_notf);
addrconf_verify(0);
void addrconf_cleanup(void)
{
struct inet6_ifaddr *ifa;
+ struct net_device *dev;
int i;
unregister_netdevice_notifier(&ipv6_dev_notf);
- unregister_pernet_device(&addrconf_net_ops);
-
unregister_pernet_subsys(&addrconf_ops);
rtnl_lock();
+ /* clean dev list */
+ for_each_netdev(&init_net, dev) {
+ if (__in6_dev_get(dev) == NULL)
+ continue;
+ addrconf_ifdown(dev, 1);
+ }
+ addrconf_ifdown(init_net.loopback_dev, 2);
+
/*
* Check hash table.
*/
del_timer(&addr_chk_timer);
rtnl_unlock();
-
- unregister_pernet_subsys(&addrconf_net_ops);
}
static struct list_head inetsw6[SOCK_MAX];
static DEFINE_SPINLOCK(inetsw6_lock);
+static int disable_ipv6 = 0;
+module_param_named(disable, disable_ipv6, int, 0);
+MODULE_PARM_DESC(disable, "Disable IPv6 such that it is non-functional");
+
static __inline__ struct ipv6_pinfo *inet6_sk_generic(struct sock *sk)
{
const int offset = sk->sk_prot->obj_size - sizeof(struct ipv6_pinfo);
{
struct sk_buff *dummy_skb;
struct list_head *r;
- int err;
+ int err = 0;
BUILD_BUG_ON(sizeof(struct inet6_skb_parm) > sizeof(dummy_skb->cb));
+ /* Register the socket-side information for inet6_create. */
+ for(r = &inetsw6[0]; r < &inetsw6[SOCK_MAX]; ++r)
+ INIT_LIST_HEAD(r);
+
+ if (disable_ipv6) {
+ printk(KERN_INFO
+ "IPv6: Loaded, but administratively disabled, "
+ "reboot required to enable\n");
+ goto out;
+ }
+
err = proto_register(&tcpv6_prot, 1);
if (err)
goto out;
goto out_unregister_udplite_proto;
- /* Register the socket-side information for inet6_create. */
- for(r = &inetsw6[0]; r < &inetsw6[SOCK_MAX]; ++r)
- INIT_LIST_HEAD(r);
-
/* We MUST register RAW sockets before we create the ICMP6,
* IGMP6, or NDISC control sockets.
*/
if (twp != NULL) {
*twp = tw;
- NET_INC_STATS_BH(twsk_net(tw), LINUX_MIB_TIMEWAITRECYCLED);
+ NET_INC_STATS_BH(net, LINUX_MIB_TIMEWAITRECYCLED);
} else if (tw != NULL) {
/* Silly. Should hash-dance instead... */
inet_twsk_deschedule(tw, death_row);
- NET_INC_STATS_BH(twsk_net(tw), LINUX_MIB_TIMEWAITRECYCLED);
+ NET_INC_STATS_BH(net, LINUX_MIB_TIMEWAITRECYCLED);
inet_twsk_put(tw);
}
if (net->ct.sysctl_checksum && hooknum == NF_INET_PRE_ROUTING &&
nf_ip6_checksum(skb, hooknum, dataoff, IPPROTO_ICMPV6)) {
- nf_log_packet(PF_INET6, 0, skb, NULL, NULL, NULL,
- "nf_ct_icmpv6: ICMPv6 checksum failed\n");
+ if (LOG_INVALID(net, IPPROTO_ICMPV6))
+ nf_log_packet(PF_INET6, 0, skb, NULL, NULL, NULL,
+ "nf_ct_icmpv6: ICMPv6 checksum failed ");
return -NF_ACCEPT;
}
#endif
#define NFULNL_NLBUFSIZ_DEFAULT NLMSG_GOODSIZE
-#define NFULNL_TIMEOUT_DEFAULT HZ /* every second */
+#define NFULNL_TIMEOUT_DEFAULT 100 /* every second */
#define NFULNL_QTHRESH_DEFAULT 100 /* 100 packets */
#define NFULNL_COPY_RANGE_MAX 0xFFFF /* max packet size is limited by 16-bit struct nfattr nfa_len field */
qthreshold = inst->qthreshold;
/* per-rule qthreshold overrides per-instance */
- if (qthreshold > li->u.ulog.qthreshold)
- qthreshold = li->u.ulog.qthreshold;
+ if (li->u.ulog.qthreshold)
+ if (qthreshold > li->u.ulog.qthreshold)
+ qthreshold = li->u.ulog.qthreshold;
+
switch (inst->copy_mode) {
case NFULNL_COPY_META:
.release = seq_release_net,
};
-static void *xt_match_seq_start(struct seq_file *seq, loff_t *pos)
+/*
+ * Traverse state for ip{,6}_{tables,matches} for helping crossing
+ * the multi-AF mutexes.
+ */
+struct nf_mttg_trav {
+ struct list_head *head, *curr;
+ uint8_t class, nfproto;
+};
+
+enum {
+ MTTG_TRAV_INIT,
+ MTTG_TRAV_NFP_UNSPEC,
+ MTTG_TRAV_NFP_SPEC,
+ MTTG_TRAV_DONE,
+};
+
+static void *xt_mttg_seq_next(struct seq_file *seq, void *v, loff_t *ppos,
+ bool is_target)
{
- struct proc_dir_entry *pde = (struct proc_dir_entry *)seq->private;
- u_int16_t af = (unsigned long)pde->data;
+ static const uint8_t next_class[] = {
+ [MTTG_TRAV_NFP_UNSPEC] = MTTG_TRAV_NFP_SPEC,
+ [MTTG_TRAV_NFP_SPEC] = MTTG_TRAV_DONE,
+ };
+ struct nf_mttg_trav *trav = seq->private;
+
+ switch (trav->class) {
+ case MTTG_TRAV_INIT:
+ trav->class = MTTG_TRAV_NFP_UNSPEC;
+ mutex_lock(&xt[NFPROTO_UNSPEC].mutex);
+ trav->head = trav->curr = is_target ?
+ &xt[NFPROTO_UNSPEC].target : &xt[NFPROTO_UNSPEC].match;
+ break;
+ case MTTG_TRAV_NFP_UNSPEC:
+ trav->curr = trav->curr->next;
+ if (trav->curr != trav->head)
+ break;
+ mutex_unlock(&xt[NFPROTO_UNSPEC].mutex);
+ mutex_lock(&xt[trav->nfproto].mutex);
+ trav->head = trav->curr = is_target ?
+ &xt[trav->nfproto].target : &xt[trav->nfproto].match;
+ trav->class = next_class[trav->class];
+ break;
+ case MTTG_TRAV_NFP_SPEC:
+ trav->curr = trav->curr->next;
+ if (trav->curr != trav->head)
+ break;
+ /* fallthru, _stop will unlock */
+ default:
+ return NULL;
+ }
- mutex_lock(&xt[af].mutex);
- return seq_list_start(&xt[af].match, *pos);
+ if (ppos != NULL)
+ ++*ppos;
+ return trav;
}
-static void *xt_match_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+static void *xt_mttg_seq_start(struct seq_file *seq, loff_t *pos,
+ bool is_target)
{
- struct proc_dir_entry *pde = (struct proc_dir_entry *)seq->private;
- u_int16_t af = (unsigned long)pde->data;
+ struct nf_mttg_trav *trav = seq->private;
+ unsigned int j;
- return seq_list_next(v, &xt[af].match, pos);
+ trav->class = MTTG_TRAV_INIT;
+ for (j = 0; j < *pos; ++j)
+ if (xt_mttg_seq_next(seq, NULL, NULL, is_target) == NULL)
+ return NULL;
+ return trav;
}
-static void xt_match_seq_stop(struct seq_file *seq, void *v)
+static void xt_mttg_seq_stop(struct seq_file *seq, void *v)
{
- struct proc_dir_entry *pde = seq->private;
- u_int16_t af = (unsigned long)pde->data;
+ struct nf_mttg_trav *trav = seq->private;
+
+ switch (trav->class) {
+ case MTTG_TRAV_NFP_UNSPEC:
+ mutex_unlock(&xt[NFPROTO_UNSPEC].mutex);
+ break;
+ case MTTG_TRAV_NFP_SPEC:
+ mutex_unlock(&xt[trav->nfproto].mutex);
+ break;
+ }
+}
- mutex_unlock(&xt[af].mutex);
+static void *xt_match_seq_start(struct seq_file *seq, loff_t *pos)
+{
+ return xt_mttg_seq_start(seq, pos, false);
}
-static int xt_match_seq_show(struct seq_file *seq, void *v)
+static void *xt_match_seq_next(struct seq_file *seq, void *v, loff_t *ppos)
{
- struct xt_match *match = list_entry(v, struct xt_match, list);
+ return xt_mttg_seq_next(seq, v, ppos, false);
+}
- if (strlen(match->name))
- return seq_printf(seq, "%s\n", match->name);
- else
- return 0;
+static int xt_match_seq_show(struct seq_file *seq, void *v)
+{
+ const struct nf_mttg_trav *trav = seq->private;
+ const struct xt_match *match;
+
+ switch (trav->class) {
+ case MTTG_TRAV_NFP_UNSPEC:
+ case MTTG_TRAV_NFP_SPEC:
+ if (trav->curr == trav->head)
+ return 0;
+ match = list_entry(trav->curr, struct xt_match, list);
+ return (*match->name == '\0') ? 0 :
+ seq_printf(seq, "%s\n", match->name);
+ }
+ return 0;
}
static const struct seq_operations xt_match_seq_ops = {
.start = xt_match_seq_start,
.next = xt_match_seq_next,
- .stop = xt_match_seq_stop,
+ .stop = xt_mttg_seq_stop,
.show = xt_match_seq_show,
};
static int xt_match_open(struct inode *inode, struct file *file)
{
+ struct seq_file *seq;
+ struct nf_mttg_trav *trav;
int ret;
- ret = seq_open(file, &xt_match_seq_ops);
- if (!ret) {
- struct seq_file *seq = file->private_data;
+ trav = kmalloc(sizeof(*trav), GFP_KERNEL);
+ if (trav == NULL)
+ return -ENOMEM;
- seq->private = PDE(inode);
+ ret = seq_open(file, &xt_match_seq_ops);
+ if (ret < 0) {
+ kfree(trav);
+ return ret;
}
- return ret;
+
+ seq = file->private_data;
+ seq->private = trav;
+ trav->nfproto = (unsigned long)PDE(inode)->data;
+ return 0;
}
static const struct file_operations xt_match_ops = {
.open = xt_match_open,
.read = seq_read,
.llseek = seq_lseek,
- .release = seq_release,
+ .release = seq_release_private,
};
static void *xt_target_seq_start(struct seq_file *seq, loff_t *pos)
{
- struct proc_dir_entry *pde = (struct proc_dir_entry *)seq->private;
- u_int16_t af = (unsigned long)pde->data;
-
- mutex_lock(&xt[af].mutex);
- return seq_list_start(&xt[af].target, *pos);
+ return xt_mttg_seq_start(seq, pos, true);
}
-static void *xt_target_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+static void *xt_target_seq_next(struct seq_file *seq, void *v, loff_t *ppos)
{
- struct proc_dir_entry *pde = (struct proc_dir_entry *)seq->private;
- u_int16_t af = (unsigned long)pde->data;
-
- return seq_list_next(v, &xt[af].target, pos);
-}
-
-static void xt_target_seq_stop(struct seq_file *seq, void *v)
-{
- struct proc_dir_entry *pde = seq->private;
- u_int16_t af = (unsigned long)pde->data;
-
- mutex_unlock(&xt[af].mutex);
+ return xt_mttg_seq_next(seq, v, ppos, true);
}
static int xt_target_seq_show(struct seq_file *seq, void *v)
{
- struct xt_target *target = list_entry(v, struct xt_target, list);
-
- if (strlen(target->name))
- return seq_printf(seq, "%s\n", target->name);
- else
- return 0;
+ const struct nf_mttg_trav *trav = seq->private;
+ const struct xt_target *target;
+
+ switch (trav->class) {
+ case MTTG_TRAV_NFP_UNSPEC:
+ case MTTG_TRAV_NFP_SPEC:
+ if (trav->curr == trav->head)
+ return 0;
+ target = list_entry(trav->curr, struct xt_target, list);
+ return (*target->name == '\0') ? 0 :
+ seq_printf(seq, "%s\n", target->name);
+ }
+ return 0;
}
static const struct seq_operations xt_target_seq_ops = {
.start = xt_target_seq_start,
.next = xt_target_seq_next,
- .stop = xt_target_seq_stop,
+ .stop = xt_mttg_seq_stop,
.show = xt_target_seq_show,
};
static int xt_target_open(struct inode *inode, struct file *file)
{
+ struct seq_file *seq;
+ struct nf_mttg_trav *trav;
int ret;
- ret = seq_open(file, &xt_target_seq_ops);
- if (!ret) {
- struct seq_file *seq = file->private_data;
+ trav = kmalloc(sizeof(*trav), GFP_KERNEL);
+ if (trav == NULL)
+ return -ENOMEM;
- seq->private = PDE(inode);
+ ret = seq_open(file, &xt_target_seq_ops);
+ if (ret < 0) {
+ kfree(trav);
+ return ret;
}
- return ret;
+
+ seq = file->private_data;
+ seq->private = trav;
+ trav->nfproto = (unsigned long)PDE(inode)->data;
+ return 0;
}
static const struct file_operations xt_target_ops = {
.open = xt_target_open,
.read = seq_read,
.llseek = seq_lseek,
- .release = seq_release,
+ .release = seq_release_private,
};
#define FORMAT_TABLES "_tables_names"
struct recent_entry *e;
char buf[sizeof("+b335:1d35:1e55:dead:c0de:1715:5afe:c0de")];
const char *c = buf;
- union nf_inet_addr addr;
+ union nf_inet_addr addr = {};
u_int16_t family;
bool add, succ;
return 0;
}
+/**
+ * netlink_set_err - report error to broadcast listeners
+ * @ssk: the kernel netlink socket, as returned by netlink_kernel_create()
+ * @pid: the PID of a process that we want to skip (if any)
+ * @groups: the broadcast group that will notice the error
+ * @code: error code, must be negative (as usual in kernelspace)
+ */
void netlink_set_err(struct sock *ssk, u32 pid, u32 group, int code)
{
struct netlink_set_err_data info;
info.exclude_sk = ssk;
info.pid = pid;
info.group = group;
- info.code = code;
+ /* sk->sk_err wants a positive error value */
+ info.code = -code;
read_lock(&nl_table_lock);
if (R_tab == NULL)
goto failure;
- if (!est && (ret == ACT_P_CREATED ||
- !gen_estimator_active(&police->tcf_bstats,
- &police->tcf_rate_est))) {
- err = -EINVAL;
- goto failure;
- }
-
if (parm->peakrate.rate) {
P_tab = qdisc_get_rtab(&parm->peakrate,
tb[TCA_POLICE_PEAKRATE]);
&police->tcf_lock, est);
if (err)
goto failure_unlock;
+ } else if (tb[TCA_POLICE_AVRATE] &&
+ (ret == ACT_P_CREATED ||
+ !gen_estimator_active(&police->tcf_bstats,
+ &police->tcf_rate_est))) {
+ err = -EINVAL;
+ goto failure_unlock;
}
/* No failure allowed after this point */
{
struct drr_sched *q = qdisc_priv(sch);
struct drr_class *cl = (struct drr_class *)*arg;
+ struct nlattr *opt = tca[TCA_OPTIONS];
struct nlattr *tb[TCA_DRR_MAX + 1];
u32 quantum;
int err;
- err = nla_parse_nested(tb, TCA_DRR_MAX, tca[TCA_OPTIONS], drr_policy);
+ if (!opt)
+ return -EINVAL;
+
+ err = nla_parse_nested(tb, TCA_DRR_MAX, opt, drr_policy);
if (err < 0)
return err;
static int sctp_ctl_sock_init(void)
{
int err;
- sa_family_t family;
+ sa_family_t family = PF_INET;
if (sctp_get_pf_specific(PF_INET6))
family = PF_INET6;
- else
- family = PF_INET;
err = inet_ctl_sock_create(&sctp_ctl_sock, family,
SOCK_SEQPACKET, IPPROTO_SCTP, &init_net);
+
+ /* If IPv6 socket could not be created, try the IPv4 socket */
+ if (err < 0 && family == PF_INET6)
+ err = inet_ctl_sock_create(&sctp_ctl_sock, AF_INET,
+ SOCK_SEQPACKET, IPPROTO_SCTP,
+ &init_net);
+
if (err < 0) {
printk(KERN_ERR
"SCTP: Failed to create the SCTP control socket.\n");
out:
return status;
err_v6_add_protocol:
- sctp_v6_del_protocol();
-err_add_protocol:
sctp_v4_del_protocol();
+err_add_protocol:
inet_ctl_sock_destroy(sctp_ctl_sock);
err_ctl_sock_init:
sctp_v6_protosw_exit();
sctp_v4_pf_exit();
sctp_v6_pf_exit();
sctp_sysctl_unregister();
- list_del(&sctp_af_inet.list);
free_pages((unsigned long)sctp_port_hashtable,
get_order(sctp_port_hashsize *
sizeof(struct sctp_bind_hashbucket)));
sctp_v4_pf_exit();
sctp_sysctl_unregister();
- list_del(&sctp_af_inet.list);
free_pages((unsigned long)sctp_assoc_hashtable,
get_order(sctp_assoc_hashsize *
struct sctp_association *asoc,
struct sctp_chunk *chunk)
{
- struct sctp_operr_chunk *operr_chunk;
struct sctp_errhdr *err_hdr;
+ struct sctp_ulpevent *ev;
- operr_chunk = (struct sctp_operr_chunk *)chunk->chunk_hdr;
- err_hdr = &operr_chunk->err_hdr;
+ while (chunk->chunk_end > chunk->skb->data) {
+ err_hdr = (struct sctp_errhdr *)(chunk->skb->data);
- switch (err_hdr->cause) {
- case SCTP_ERROR_UNKNOWN_CHUNK:
- {
- struct sctp_chunkhdr *unk_chunk_hdr;
+ ev = sctp_ulpevent_make_remote_error(asoc, chunk, 0,
+ GFP_ATOMIC);
+ if (!ev)
+ return;
- unk_chunk_hdr = (struct sctp_chunkhdr *)err_hdr->variable;
- switch (unk_chunk_hdr->type) {
- /* ADDIP 4.1 A9) If the peer responds to an ASCONF with an
- * ERROR chunk reporting that it did not recognized the ASCONF
- * chunk type, the sender of the ASCONF MUST NOT send any
- * further ASCONF chunks and MUST stop its T-4 timer.
- */
- case SCTP_CID_ASCONF:
- asoc->peer.asconf_capable = 0;
- sctp_add_cmd_sf(cmds, SCTP_CMD_TIMER_STOP,
+ sctp_ulpq_tail_event(&asoc->ulpq, ev);
+
+ switch (err_hdr->cause) {
+ case SCTP_ERROR_UNKNOWN_CHUNK:
+ {
+ sctp_chunkhdr_t *unk_chunk_hdr;
+
+ unk_chunk_hdr = (sctp_chunkhdr_t *)err_hdr->variable;
+ switch (unk_chunk_hdr->type) {
+ /* ADDIP 4.1 A9) If the peer responds to an ASCONF with
+ * an ERROR chunk reporting that it did not recognized
+ * the ASCONF chunk type, the sender of the ASCONF MUST
+ * NOT send any further ASCONF chunks and MUST stop its
+ * T-4 timer.
+ */
+ case SCTP_CID_ASCONF:
+ if (asoc->peer.asconf_capable == 0)
+ break;
+
+ asoc->peer.asconf_capable = 0;
+ sctp_add_cmd_sf(cmds, SCTP_CMD_TIMER_STOP,
SCTP_TO(SCTP_EVENT_TIMEOUT_T4_RTO));
+ break;
+ default:
+ break;
+ }
break;
+ }
default:
break;
}
- break;
- }
- default:
- break;
}
}
sctp_cmd_seq_t *commands)
{
struct sctp_chunk *chunk = arg;
- struct sctp_ulpevent *ev;
if (!sctp_vtag_verify(chunk, asoc))
return sctp_sf_pdiscard(ep, asoc, type, arg, commands);
return sctp_sf_violation_chunklen(ep, asoc, type, arg,
commands);
- while (chunk->chunk_end > chunk->skb->data) {
- ev = sctp_ulpevent_make_remote_error(asoc, chunk, 0,
- GFP_ATOMIC);
- if (!ev)
- goto nomem;
+ sctp_add_cmd_sf(commands, SCTP_CMD_PROCESS_OPERR,
+ SCTP_CHUNK(chunk));
- sctp_add_cmd_sf(commands, SCTP_CMD_EVENT_ULP,
- SCTP_ULPEVENT(ev));
- sctp_add_cmd_sf(commands, SCTP_CMD_PROCESS_OPERR,
- SCTP_CHUNK(chunk));
- }
return SCTP_DISPOSITION_CONSUME;
-
-nomem:
- return SCTP_DISPOSITION_NOMEM;
}
/*
freq_diff = freq_range->end_freq_khz - freq_range->start_freq_khz;
- if (freq_diff <= 0 || freq_range->max_bandwidth_khz > freq_diff)
+ if (freq_range->end_freq_khz <= freq_range->start_freq_khz ||
+ freq_range->max_bandwidth_khz > freq_diff)
return false;
return true;
if (!S_ISSOCK(inode->i_mode) ||
((mask & (MAY_WRITE | MAY_APPEND)) == 0))
return 0;
-
sock = SOCKET_I(inode);
sk = sock->sk;
+ if (sk == NULL)
+ return 0;
sksec = sk->sk_security;
- if (sksec->nlbl_state != NLBL_REQUIRE)
+ if (sksec == NULL || sksec->nlbl_state != NLBL_REQUIRE)
return 0;
local_bh_disable();
* looks for host based access restrictions
*
* This version will only be appropriate for really small
- * sets of single label hosts. Because of the masking
- * it cannot shortcut out on the first match. There are
- * numerious ways to address the problem, but none of them
- * have been applied here.
+ * sets of single label hosts.
*
* Returns the label of the far end or NULL if it's not special.
*/
static char *smack_host_label(struct sockaddr_in *sip)
{
struct smk_netlbladdr *snp;
- char *bestlabel = NULL;
struct in_addr *siap = &sip->sin_addr;
- struct in_addr *liap;
- struct in_addr *miap;
- struct in_addr bestmask;
if (siap->s_addr == 0)
return NULL;
- bestmask.s_addr = 0;
-
for (snp = smack_netlbladdrs; snp != NULL; snp = snp->smk_next) {
- liap = &snp->smk_host.sin_addr;
- miap = &snp->smk_mask;
- /*
- * If the addresses match after applying the list entry mask
- * the entry matches the address. If it doesn't move along to
- * the next entry.
- */
- if ((liap->s_addr & miap->s_addr) !=
- (siap->s_addr & miap->s_addr))
- continue;
/*
- * If the list entry mask identifies a single address
- * it can't get any more specific.
+ * we break after finding the first match because
+ * the list is sorted from longest to shortest mask
+ * so we have found the most specific match
*/
- if (miap->s_addr == 0xffffffff)
+ if ((&snp->smk_host.sin_addr)->s_addr ==
+ (siap->s_addr & (&snp->smk_mask)->s_addr)) {
return snp->smk_label;
- /*
- * If the list entry mask is less specific than the best
- * already found this entry is uninteresting.
- */
- if ((miap->s_addr | bestmask.s_addr) == bestmask.s_addr)
- continue;
- /*
- * This is better than any entry found so far.
- */
- bestmask.s_addr = miap->s_addr;
- bestlabel = snp->smk_label;
+ }
}
- return bestlabel;
+ return NULL;
}
/**
return skp;
}
-/*
-#define BEMASK 0x80000000
-*/
-#define BEMASK 0x00000001
#define BEBITS (sizeof(__be32) * 8)
/*
{
struct smk_netlbladdr *skp = (struct smk_netlbladdr *) v;
unsigned char *hp = (char *) &skp->smk_host.sin_addr.s_addr;
- __be32 bebits;
- int maskn = 0;
+ int maskn;
+ u32 temp_mask = be32_to_cpu(skp->smk_mask.s_addr);
- for (bebits = BEMASK; bebits != 0; maskn++, bebits <<= 1)
- if ((skp->smk_mask.s_addr & bebits) == 0)
- break;
+ for (maskn = 0; temp_mask; temp_mask <<= 1, maskn++);
seq_printf(s, "%u.%u.%u.%u/%d %s\n",
hp[0], hp[1], hp[2], hp[3], maskn, skp->smk_label);
return seq_open(file, &netlbladdr_seq_ops);
}
+/**
+ * smk_netlbladdr_insert
+ * @new : netlabel to insert
+ *
+ * This helper insert netlabel in the smack_netlbladdrs list
+ * sorted by netmask length (longest to smallest)
+ */
+static void smk_netlbladdr_insert(struct smk_netlbladdr *new)
+{
+ struct smk_netlbladdr *m;
+
+ if (smack_netlbladdrs == NULL) {
+ smack_netlbladdrs = new;
+ return;
+ }
+
+ /* the comparison '>' is a bit hacky, but works */
+ if (new->smk_mask.s_addr > smack_netlbladdrs->smk_mask.s_addr) {
+ new->smk_next = smack_netlbladdrs;
+ smack_netlbladdrs = new;
+ return;
+ }
+ for (m = smack_netlbladdrs; m != NULL; m = m->smk_next) {
+ if (m->smk_next == NULL) {
+ m->smk_next = new;
+ return;
+ }
+ if (new->smk_mask.s_addr > m->smk_next->smk_mask.s_addr) {
+ new->smk_next = m->smk_next;
+ m->smk_next = new;
+ return;
+ }
+ }
+}
+
+
/**
* smk_write_netlbladdr - write() for /smack/netlabel
* @filp: file pointer, not actually used
struct netlbl_audit audit_info;
struct in_addr mask;
unsigned int m;
- __be32 bebits = BEMASK;
+ u32 mask_bits = (1<<31);
__be32 nsa;
+ u32 temp_mask;
/*
* Must have privilege.
if (sp == NULL)
return -EINVAL;
- for (mask.s_addr = 0; m > 0; m--) {
- mask.s_addr |= bebits;
- bebits <<= 1;
+ for (temp_mask = 0; m > 0; m--) {
+ temp_mask |= mask_bits;
+ mask_bits >>= 1;
}
+ mask.s_addr = cpu_to_be32(temp_mask);
+
+ newname.sin_addr.s_addr &= mask.s_addr;
/*
* Only allow one writer at a time. Writes should be
* quite rare and small in any case.
mutex_lock(&smk_netlbladdr_lock);
nsa = newname.sin_addr.s_addr;
+ /* try to find if the prefix is already in the list */
for (skp = smack_netlbladdrs; skp != NULL; skp = skp->smk_next)
if (skp->smk_host.sin_addr.s_addr == nsa &&
skp->smk_mask.s_addr == mask.s_addr)
rc = 0;
skp->smk_host.sin_addr.s_addr = newname.sin_addr.s_addr;
skp->smk_mask.s_addr = mask.s_addr;
- skp->smk_next = smack_netlbladdrs;
skp->smk_label = sp;
- smack_netlbladdrs = skp;
+ smk_netlbladdr_insert(skp);
}
} else {
rc = netlbl_cfg_unlbl_static_del(&init_net, NULL,
SND_PCI_QUIRK(0x1028, 0x20ac, "Dell Studio Desktop", 0x01),
/* including bogus ALC268 in slot#2 that conflicts with ALC888 */
SND_PCI_QUIRK(0x17c0, 0x4085, "Medion MD96630", 0x01),
+ /* conflict of ALC268 in slot#3 (digital I/O); a temporary fix */
+ SND_PCI_QUIRK(0x1179, 0xff00, "Toshiba laptop", 0x03),
{}
};
SND_PCI_QUIRK(0x103c, 0x1309, "HP xw4*00", ALC262_HP_BPC),
SND_PCI_QUIRK(0x103c, 0x130a, "HP xw6*00", ALC262_HP_BPC),
SND_PCI_QUIRK(0x103c, 0x130b, "HP xw8*00", ALC262_HP_BPC),
+ SND_PCI_QUIRK(0x103c, 0x170b, "HP xw*", ALC262_HP_BPC),
SND_PCI_QUIRK(0x103c, 0x2800, "HP D7000", ALC262_HP_BPC_D7000_WL),
SND_PCI_QUIRK(0x103c, 0x2801, "HP D7000", ALC262_HP_BPC_D7000_WF),
SND_PCI_QUIRK(0x103c, 0x2802, "HP D7000", ALC262_HP_BPC_D7000_WL),
"LFE Playback Volume",
"Side Playback Volume",
"Headphone Playback Volume",
- "Headphone Playback Volume",
+ "Headphone2 Playback Volume",
"Speaker Playback Volume",
"External Speaker Playback Volume",
"Speaker2 Playback Volume",
"LFE Playback Switch",
"Side Playback Switch",
"Headphone Playback Switch",
- "Headphone Playback Switch",
+ "Headphone2 Playback Switch",
"Speaker Playback Switch",
"External Speaker Playback Switch",
"Speaker2 Playback Switch",
if (! spec->autocfg.line_outs)
return 0; /* can't find valid pin config */
+#if 0 /* FIXME: temporarily disabled */
/* If we have no real line-out pin and multiple hp-outs, HPs should
* be set up as multi-channel outputs.
*/
spec->autocfg.line_out_type = AUTO_PIN_HP_OUT;
spec->autocfg.hp_outs = 0;
}
+#endif /* FIXME: temporarily disabled */
if (spec->autocfg.mono_out_pin) {
int dir = get_wcaps(codec, spec->autocfg.mono_out_pin) &
(AC_WCAP_OUT_AMP | AC_WCAP_IN_AMP);
case STAC_DELL_M4_3:
spec->num_dmics = 1;
spec->num_smuxes = 0;
- spec->num_dmuxes = 0;
+ spec->num_dmuxes = 1;
break;
default:
spec->num_dmics = STAC92HD71BXX_NUM_DMICS;
projects / linux-2.6-omap-h63xx.git / commitdiff