]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/commitdiff
AT91 MMC 5 : Minor cleanups
authorAndrew Victor <andrew@sanpeople.com>
Mon, 23 Oct 2006 12:53:20 +0000 (14:53 +0200)
committerPierre Ossman <drzeus@drzeus.cx>
Mon, 11 Dec 2006 08:47:21 +0000 (09:47 +0100)
A number of small cleanups to the AT91RM9200 MMC driver:
 - fix warnings generated by pr_debug().
 - prepend "AT91 MMC:" to printk() messages.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
drivers/mmc/at91_mci.c

index 2f11d67d8d07ad6cbc0403d8e086efd433192873..d500b6b21ea053bd3849d5de483963d7197dc98f 100644 (file)
@@ -336,10 +336,10 @@ static void at91_mci_handle_transmitted(struct at91mci_host *host)
 static void at91_mci_enable(struct at91mci_host *host)
 {
        at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIEN);
-       at91_mci_write(host, AT91_MCI_IDR, 0xFFFFFFFF);
+       at91_mci_write(host, AT91_MCI_IDR, 0xffffffff);
        at91_mci_write(host, AT91_MCI_DTOR, AT91_MCI_DTOMUL_1M | AT91_MCI_DTOCYC);
-       at91_mci_write(host, AT91_MCI_MR, 0x834A);
-       at91_mci_write(host, AT91_MCI_SDCR, 0x0);
+       at91_mci_write(host, AT91_MCI_MR, AT91_MCI_PDCMODE | 0x34a);
+       at91_mci_write(host, AT91_MCI_SDCR, 0);
 }
 
 /*
@@ -420,7 +420,7 @@ static unsigned int at91_mci_send_command(struct at91mci_host *host, struct mmc_
        /*
         * Set the arguments and send the command
         */
-       pr_debug("Sending command %d as %08X, arg = %08X, blocks = %d, length = %d (MR = %08lX)\n",
+       pr_debug("Sending command %d as %08X, arg = %08X, blocks = %d, length = %d (MR = %08X)\n",
                cmd->opcode, cmdr, cmd->arg, blocks, block_length, at91_mci_read(host, AT91_MCI_MR));
 
        if (!data) {
@@ -659,7 +659,7 @@ static irqreturn_t at91_mci_irq(int irq, void *devid)
        int_status = at91_mci_read(host, AT91_MCI_SR);
        int_mask = at91_mci_read(host, AT91_MCI_IMR);
        
-       pr_debug("MCI irq: status = %08X, %08lX, %08lX\n", int_status, int_mask,
+       pr_debug("MCI irq: status = %08X, %08X, %08X\n", int_status, int_mask,
                int_status & int_mask);
        
        int_status = int_status & int_mask;
@@ -825,7 +825,7 @@ static int at91_mci_probe(struct platform_device *pdev)
 #ifdef SUPPORT_4WIRE
                mmc->caps |= MMC_CAP_4_BIT_DATA;
 #else
-               printk("MMC: 4 wire bus mode not supported by this driver - using 1 wire\n");
+               printk("AT91 MMC: 4 wire bus mode not supported by this driver - using 1 wire\n");
 #endif
        }
 
@@ -864,7 +864,7 @@ static int at91_mci_probe(struct platform_device *pdev)
        host->irq = platform_get_irq(pdev, 0);
        ret = request_irq(host->irq, at91_mci_irq, IRQF_SHARED, DRIVER_NAME, host);
        if (ret) {
-               printk(KERN_ERR "Failed to request MCI interrupt\n");
+               printk(KERN_ERR "AT91 MMC: Failed to request MCI interrupt\n");
                clk_disable(host->mci_clk);
                clk_put(host->mci_clk);
                mmc_free_host(mmc);
@@ -892,10 +892,10 @@ static int at91_mci_probe(struct platform_device *pdev)
                ret = request_irq(host->board->det_pin, at91_mmc_det_irq,
                                0, DRIVER_NAME, host);
                if (ret)
-                       printk(KERN_ERR "couldn't allocate MMC detect irq\n");
+                       printk(KERN_ERR "AT91 MMC: Couldn't allocate MMC detect irq\n");
        }
 
-       pr_debug(KERN_INFO "Added MCI driver\n");
+       pr_debug("Added MCI driver\n");
 
        return 0;
 }