MDIO-less PHYs should use CONFIG_FIXED_PHY driver and appropriate
fixed-link property in the device tree.
If not, ethernet will not work:
  
e0024520:03 not found
  eth1: Could not attach to PHY
  IP-Config: Failed to open eth1
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
                                reg = <0x2>;
                                device_type = "ethernet-phy";
                        };
-                       phy3: ethernet-phy@3 {
-                               interrupt-parent = <&ipic>;
-                               interrupts = <18 0x8>;
-                               reg = <0x3>;
-                               device_type = "ethernet-phy";
-                       };
                };
 
                enet0: ethernet@24000 {
                        interrupts = <35 0x8 36 0x8 37 0x8>;
                        phy-connection-type = "mii";
                        interrupt-parent = <&ipic>;
-                       phy-handle = <&phy3>;
+                       fixed-link = <1 1 1000 0 0>;
                };
 
                serial0: serial@4500 {
 
                                reg = <0x2>;
                                device_type = "ethernet-phy";
                        };
-                       phy3: ethernet-phy@3 {
-                               interrupt-parent = <&ipic>;
-                               interrupts = <18 0x8>;
-                               reg = <0x3>;
-                               device_type = "ethernet-phy";
-                       };
                };
 
                enet0: ethernet@24000 {
                        interrupts = <35 0x8 36 0x8 37 0x8>;
                        phy-connection-type = "mii";
                        interrupt-parent = <&ipic>;
-                       phy-handle = <&phy3>;
+                       fixed-link = <1 1 1000 0 0>;
                };
 
                serial0: serial@4500 {
 
                                reg = <0x2>;
                                device_type = "ethernet-phy";
                        };
-                       phy3: ethernet-phy@3 {
-                               interrupt-parent = <&ipic>;
-                               interrupts = <18 0x8>;
-                               reg = <0x3>;
-                               device_type = "ethernet-phy";
-                       };
                };
 
                enet0: ethernet@24000 {
                        interrupts = <35 0x8 36 0x8 37 0x8>;
                        phy-connection-type = "mii";
                        interrupt-parent = <&ipic>;
-                       phy-handle = <&phy3>;
+                       fixed-link = <1 1 1000 0 0>;
                };
 
                serial0: serial@4500 {
 
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:29 2008
+# Tue Jun 10 09:17:12 2008
 #
 # CONFIG_PPC64 is not set
 
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
+CONFIG_FIXED_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y