]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/commitdiff
x86: PAT phys_mem_access_prot_allowed for dev/mem mmap
authorvenkatesh.pallipadi@intel.com <venkatesh.pallipadi@intel.com>
Wed, 19 Mar 2008 00:00:20 +0000 (17:00 -0700)
committerIngo Molnar <mingo@elte.hu>
Thu, 24 Apr 2008 21:40:47 +0000 (23:40 +0200)
Introduce phys_mem_access_prot_allowed(), which checks whether the mapping
is possible, without any conflicts and returns success or failure based on that.
phys_mem_access_prot() by itself does not allow failure case. This ability
to return error is needed for PAT where we may have aliasing conflicts.

x86 setup __HAVE_PHYS_MEM_ACCESS_PROT and move x86 specific code out of
/dev/mem into arch specific area.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
arch/x86/mm/pat.c
drivers/char/mem.c
include/asm-x86/pgtable.h

index 72c0f6097402bfae75d7d658efa4dc6544994c78..64cc0c18233ed2831e6a368f379c5bab7dabb993 100644 (file)
@@ -419,3 +419,42 @@ int free_memtype(u64 start, u64 end)
        return err;
 }
 
+
+/* /dev/mem interface. Use the previous mapping */
+pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+                               unsigned long size, pgprot_t vma_prot)
+{
+       return vma_prot;
+}
+
+int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
+                               unsigned long size, pgprot_t *vma_prot)
+{
+
+       if (file->f_flags & O_SYNC) {
+               *vma_prot = pgprot_noncached(*vma_prot);
+               return 1;
+       }
+
+#ifdef CONFIG_X86_32
+       /*
+        * On the PPro and successors, the MTRRs are used to set
+        * memory types for physical addresses outside main memory,
+        * so blindly setting UC or PWT on those pages is wrong.
+        * For Pentiums and earlier, the surround logic should disable
+        * caching for the high addresses through the KEN pin, but
+        * we maintain the tradition of paranoia in this code.
+        */
+       if (!pat_wc_enabled &&
+           ! ( test_bit(X86_FEATURE_MTRR, boot_cpu_data.x86_capability) ||
+               test_bit(X86_FEATURE_K6_MTRR, boot_cpu_data.x86_capability) ||
+               test_bit(X86_FEATURE_CYRIX_ARR, boot_cpu_data.x86_capability) ||
+               test_bit(X86_FEATURE_CENTAUR_MCR, boot_cpu_data.x86_capability)) &&
+          (pfn << PAGE_SHIFT) >= __pa(high_memory)) {
+               *vma_prot = pgprot_noncached(*vma_prot);
+               return 1;
+       }
+#endif
+
+       return 1;
+}
index 83495885ada0e00fbf0ce33b13d03cc7ac746082..56b2fb4fbc9390ccee722630db2cc96e7a635331 100644 (file)
  */
 static inline int uncached_access(struct file *file, unsigned long addr)
 {
-#if defined(__i386__) && !defined(__arch_um__)
-       /*
-        * On the PPro and successors, the MTRRs are used to set
-        * memory types for physical addresses outside main memory,
-        * so blindly setting PCD or PWT on those pages is wrong.
-        * For Pentiums and earlier, the surround logic should disable
-        * caching for the high addresses through the KEN pin, but
-        * we maintain the tradition of paranoia in this code.
-        */
-       if (file->f_flags & O_SYNC)
-               return 1;
-       return !( test_bit(X86_FEATURE_MTRR, boot_cpu_data.x86_capability) ||
-                 test_bit(X86_FEATURE_K6_MTRR, boot_cpu_data.x86_capability) ||
-                 test_bit(X86_FEATURE_CYRIX_ARR, boot_cpu_data.x86_capability) ||
-                 test_bit(X86_FEATURE_CENTAUR_MCR, boot_cpu_data.x86_capability) )
-         && addr >= __pa(high_memory);
-#elif defined(__x86_64__) && !defined(__arch_um__)
-       /* 
-        * This is broken because it can generate memory type aliases,
-        * which can cause cache corruptions
-        * But it is only available for root and we have to be bug-to-bug
-        * compatible with i386.
-        */
-       if (file->f_flags & O_SYNC)
-               return 1;
-       /* same behaviour as i386. PAT always set to cached and MTRRs control the
-          caching behaviour. 
-          Hopefully a full PAT implementation will fix that soon. */      
-       return 0;
-#elif defined(CONFIG_IA64)
+#if defined(CONFIG_IA64)
        /*
         * On ia64, we ignore O_SYNC because we cannot tolerate memory attribute aliases.
         */
@@ -283,6 +254,12 @@ static ssize_t write_mem(struct file * file, const char __user * buf,
        return written;
 }
 
+int __attribute__((weak)) phys_mem_access_prot_allowed(struct file *file,
+       unsigned long pfn, unsigned long size, pgprot_t *vma_prot)
+{
+       return 1;
+}
+
 #ifndef __HAVE_PHYS_MEM_ACCESS_PROT
 static pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
                                     unsigned long size, pgprot_t vma_prot)
@@ -336,6 +313,10 @@ static int mmap_mem(struct file * file, struct vm_area_struct * vma)
        if (!range_is_allowed(vma->vm_pgoff, size))
                return -EPERM;
 
+       if (!phys_mem_access_prot_allowed(file, vma->vm_pgoff, size,
+                                               &vma->vm_page_prot))
+               return -EINVAL;
+
        vma->vm_page_prot = phys_mem_access_prot(file, vma->vm_pgoff,
                                                 size,
                                                 vma->vm_page_prot);
index f1d9f4a03f6fafc0dfe8de3634196f571608d6e4..1902f0aed6c13ae0ee73f18d66a82905f00ae6bb 100644 (file)
@@ -289,6 +289,15 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 
 #define canon_pgprot(p) __pgprot(pgprot_val(p) & __supported_pte_mask)
 
+#ifndef __ASSEMBLY__
+#define __HAVE_PHYS_MEM_ACCESS_PROT
+struct file;
+pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+                              unsigned long size, pgprot_t vma_prot);
+int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
+                              unsigned long size, pgprot_t *vma_prot);
+#endif
+
 #ifdef CONFIG_PARAVIRT
 #include <asm/paravirt.h>
 #else  /* !CONFIG_PARAVIRT */