]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/commitdiff
USB: at91-ohci, handle extra at91sam9261 ahb clock
authorAndrew Victor <andrew@sanpeople.com>
Fri, 16 Feb 2007 18:18:58 +0000 (10:18 -0800)
committerGreg Kroah-Hartman <gregkh@suse.de>
Fri, 16 Feb 2007 23:32:24 +0000 (15:32 -0800)
The AT91SAM9261 needs to activate an AHB clock (HCK0) to use the USB Host
controller. Previously clock.c would just enable it at startup, but now
all the unused clocks are automatically disabled.

Based on patch from Nicolas Ferre.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/usb/host/ohci-at91.c

index 930346487278e7598618cc16c62ebf8b62eccb0c..d849c809acbdca97394fa7b8dcd8225733a91f5a 100644 (file)
 #include <asm/mach-types.h>
 #include <asm/hardware.h>
 #include <asm/arch/board.h>
+#include <asm/arch/cpu.h>
 
 #ifndef CONFIG_ARCH_AT91
 #error "CONFIG_ARCH_AT91 must be defined."
 #endif
 
-/* interface and function clocks */
-static struct clk *iclk, *fclk;
+/* interface and function clocks; sometimes also an AHB clock */
+static struct clk *iclk, *fclk, *hclk;
 static int clocked;
 
 extern int usb_disabled(void);
 
 /*-------------------------------------------------------------------------*/
 
+static void at91_start_clock(void)
+{
+       if (cpu_is_at91sam9261())
+               clk_enable(hclk);
+       clk_enable(iclk);
+       clk_enable(fclk);
+       clocked = 1;
+}
+
+static void at91_stop_clock(void)
+{
+       clk_disable(fclk);
+       clk_disable(iclk);
+       if (cpu_is_at91sam9261())
+               clk_disable(hclk);
+       clocked = 0;
+}
+
 static void at91_start_hc(struct platform_device *pdev)
 {
        struct usb_hcd *hcd = platform_get_drvdata(pdev);
@@ -41,9 +60,7 @@ static void at91_start_hc(struct platform_device *pdev)
        /*
         * Start the USB clocks.
         */
-       clk_enable(iclk);
-       clk_enable(fclk);
-       clocked = 1;
+       at91_start_clock();
 
        /*
         * The USB host controller must remain in reset.
@@ -66,9 +83,7 @@ static void at91_stop_hc(struct platform_device *pdev)
        /*
         * Stop the USB clocks.
         */
-       clk_disable(fclk);
-       clk_disable(iclk);
-       clocked = 0;
+       at91_stop_clock();
 }
 
 
@@ -126,6 +141,8 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
 
        iclk = clk_get(&pdev->dev, "ohci_clk");
        fclk = clk_get(&pdev->dev, "uhpck");
+       if (cpu_is_at91sam9261())
+               hclk = clk_get(&pdev->dev, "hck0");
 
        at91_start_hc(pdev);
        ohci_hcd_init(hcd_to_ohci(hcd));
@@ -137,6 +154,8 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
        /* Error handling */
        at91_stop_hc(pdev);
 
+       if (cpu_is_at91sam9261())
+               clk_put(hclk);
        clk_put(fclk);
        clk_put(iclk);
 
@@ -171,9 +190,11 @@ static int usb_hcd_at91_remove(struct usb_hcd *hcd,
        iounmap(hcd->regs);
        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 
+       if (cpu_is_at91sam9261())
+               clk_put(hclk);
        clk_put(fclk);
        clk_put(iclk);
-       fclk = iclk = NULL;
+       fclk = iclk = hclk = NULL;
 
        dev_set_drvdata(&pdev->dev, NULL);
        return 0;
@@ -280,9 +301,7 @@ ohci_hcd_at91_drv_suspend(struct platform_device *pdev, pm_message_t mesg)
         */
        if (at91_suspend_entering_slow_clock()) {
                ohci_usb_reset (ohci);
-               clk_disable(fclk);
-               clk_disable(iclk);
-               clocked = 0;
+               at91_stop_clock();
        }
 
        return 0;
@@ -295,11 +314,8 @@ static int ohci_hcd_at91_drv_resume(struct platform_device *pdev)
        if (device_may_wakeup(&pdev->dev))
                disable_irq_wake(hcd->irq);
 
-       if (!clocked) {
-               clk_enable(iclk);
-               clk_enable(fclk);
-               clocked = 1;
-       }
+       if (!clocked)
+               at91_start_clock();
 
        return 0;
 }