bool
default y
+config GENERIC_HARDIRQS
+ bool
+ default y
+
+config GENERIC_IRQ_PROBE
+ bool
+ default y
+
config RWSEM_XCHGADD_ALGORITHM
bool
prompt "SuperH system type"
default SH_SIMULATOR
-config SH_GENERIC
- bool "Generic"
-
config SH_SIMULATOR
bool "Simulator"
config SH_CAYMAN
bool "Cayman"
-config SH_ROMRAM
- bool "ROM/RAM"
-
config SH_HARP
bool "ST50-Harp"
config CACHED_MEMORY_OFFSET
hex "Cached Area Offset"
- depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
default "20000000"
config MEMORY_START
hex "Physical memory start address"
- depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
default "80000000"
config MEMORY_SIZE_IN_MB
- int "Memory size (in MB)" if SH_HARP || SH_CAYMAN || SH_SIMULATOR
- default "64" if SH_HARP || SH_CAYMAN
+ int "Memory size (in MB)"
default "8" if SH_SIMULATOR
+ default "64"
comment "Cache options"
-config DCACHE_DISABLED
- bool "DCache Disabling"
- depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
-
choice
prompt "DCache mode"
- depends on !DCACHE_DISABLED && !SH_SIMULATOR
+ default DCACHE_DISABLED if SH_SIMULATOR
default DCACHE_WRITE_BACK
config DCACHE_WRITE_BACK
bool "Write-back"
+ depends on !SH_SIMULATOR
config DCACHE_WRITE_THROUGH
bool "Write-through"
+ depends on !SH_SIMULATOR
+
+config DCACHE_DISABLED
+ bool "Disabled"
endchoice
config ICACHE_DISABLED
bool "ICache Disabling"
- depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
config PCIDEVICE_MEMORY_START
hex
- depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
default "C0000000"
config DEVICE_MEMORY_START
hex
- depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
default "E0000000"
config FLASH_MEMORY_START
hex "Flash memory/on-chip devices start address"
- depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
default "00000000"
config PCI_BLOCK_START
hex "PCI block start address"
- depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
default "40000000"
comment "CPU Subtype specific options"
bool "Include workaround for SH5-101 cut2 silicon defect ID2815"
comment "Misc options"
+
config HEARTBEAT
bool "Heartbeat LED"
+ depends on SH_CAYMAN
config HDSP253_LED
bool "Support for HDSP-253 LED"
config PCI
bool "PCI support"
+ depends on SH_CAYMAN
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
source "crypto/Kconfig"
source "lib/Kconfig"
-
-#
-# Use the generic interrupt handling code in kernel/irq/:
-#
-config GENERIC_HARDIRQS
- bool
- default y
-
-config GENERIC_IRQ_PROBE
- bool
- default y
-
config EARLY_PRINTK
bool "Early SCIF console support"
-config DEBUG_KERNEL_WITH_GDB_STUB
- bool "GDB Stub kernel debug"
-
config SH64_PROC_TLB
bool "Debug: report TLB fill/purge activity through /proc/tlb"
depends on PROC_FS
config SH_ALPHANUMERIC
bool "Enable debug outputs to on-board alphanumeric display"
+ depends on SH_CAYMAN
config SH_NO_BSS_INIT
bool "Avoid zeroing BSS (to speed-up startup on suitable platforms)"
-config FRAME_POINTER
- bool "Compile the kernel with frame pointers"
- default y if KGDB
- help
- If you say Y here the resulting kernel image will be slightly larger
- and slower, but it will give very useful debugging information.
- If you don't debug the kernel, you can say N, but we may not be able
- to solve problems without frame pointers.
-
endmenu
#
KBUILD_DEFCONFIG := cayman_defconfig
+KBUILD_IMAGE := arch/$(ARCH)/boot/zImage
+
ifdef LOADADDR
LINKFLAGS += -Ttext $(word 1,$(LOADADDR))
endif
machine-$(CONFIG_SH_CAYMAN) := cayman
machine-$(CONFIG_SH_SIMULATOR) := sim
machine-$(CONFIG_SH_HARP) := harp
-machine-$(CONFIG_SH_ROMRAM) := romram
head-y := arch/$(ARCH)/kernel/head.o arch/$(ARCH)/kernel/init_task.o
CLEAN_FILES += arch/$(ARCH)/lib/syscalltab.h
define archhelp
- @echo ' zImage - Compressed kernel image (arch/sh64/boot/zImage)'
+ @echo '* zImage - Compressed kernel image'
endef
-
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22
-# Fri Jul 20 12:28:34 2007
+# Linux kernel version: 2.6.23-rc8
+# Tue Oct 9 15:37:16 2007
#
CONFIG_SUPERH=y
CONFIG_SUPERH64=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
#
# System type
#
-# CONFIG_SH_GENERIC is not set
# CONFIG_SH_SIMULATOR is not set
CONFIG_SH_CAYMAN=y
-# CONFIG_SH_ROMRAM is not set
# CONFIG_SH_HARP is not set
CONFIG_CPU_SH5=y
CONFIG_CPU_SUBTYPE_SH5_101=y
#
# Cache options
#
-# CONFIG_DCACHE_DISABLED is not set
CONFIG_DCACHE_WRITE_BACK=y
# CONFIG_DCACHE_WRITE_THROUGH is not set
+# CONFIG_DCACHE_DISABLED is not set
# CONFIG_ICACHE_DISABLED is not set
CONFIG_PCIDEVICE_MEMORY_START=C0000000
CONFIG_DEVICE_MEMORY_START=E0000000
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=1
-CONFIG_VIRT_TO_BUS=y
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SH_WDT is not set
#
# PCI-based Watchdog Cards
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Multimedia devices
#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_DEV=m
+# CONFIG_VIDEO_V4L1 is not set
+# CONFIG_VIDEO_V4L1_COMPAT is not set
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_TEA5761 is not set
+# CONFIG_VIDEO_SAA7134 is not set
+# CONFIG_VIDEO_HEXIUM_ORION is not set
+# CONFIG_VIDEO_HEXIUM_GEMINI is not set
+# CONFIG_VIDEO_CX88 is not set
+# CONFIG_VIDEO_CAFE_CCIC is not set
+# CONFIG_RADIO_ADAPTERS is not set
+CONFIG_DVB_CORE=y
+# CONFIG_DVB_CORE_ATTACH is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+# CONFIG_DVB_B2C2_FLEXCOP is not set
+
+#
+# Supported BT878 Adapters
+#
+
+#
+# Supported Pluto2 Adapters
+#
+# CONFIG_DVB_PLUTO2 is not set
+
+#
+# Supported DVB Frontends
+#
+
+#
+# Customise DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+
+#
+# DVB-S (satellite) frontends
+#
+# CONFIG_DVB_STV0299 is not set
+# CONFIG_DVB_CX24110 is not set
+# CONFIG_DVB_CX24123 is not set
+# CONFIG_DVB_TDA8083 is not set
+# CONFIG_DVB_MT312 is not set
+# CONFIG_DVB_VES1X93 is not set
+# CONFIG_DVB_S5H1420 is not set
+# CONFIG_DVB_TDA10086 is not set
+
+#
+# DVB-T (terrestrial) frontends
+#
+# CONFIG_DVB_SP8870 is not set
+# CONFIG_DVB_SP887X is not set
+# CONFIG_DVB_CX22700 is not set
+# CONFIG_DVB_CX22702 is not set
+# CONFIG_DVB_L64781 is not set
+# CONFIG_DVB_TDA1004X is not set
+# CONFIG_DVB_NXT6000 is not set
+# CONFIG_DVB_MT352 is not set
+# CONFIG_DVB_ZL10353 is not set
+# CONFIG_DVB_DIB3000MB is not set
+# CONFIG_DVB_DIB3000MC is not set
+# CONFIG_DVB_DIB7000M is not set
+# CONFIG_DVB_DIB7000P is not set
+
+#
+# DVB-C (cable) frontends
+#
+# CONFIG_DVB_VES1820 is not set
+# CONFIG_DVB_TDA10021 is not set
+# CONFIG_DVB_TDA10023 is not set
+# CONFIG_DVB_STV0297 is not set
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+# CONFIG_DVB_NXT200X is not set
+# CONFIG_DVB_OR51211 is not set
+# CONFIG_DVB_OR51132 is not set
+# CONFIG_DVB_BCM3510 is not set
+# CONFIG_DVB_LGDT330X is not set
+
+#
+# Tuners/PLL support
+#
+# CONFIG_DVB_PLL is not set
+# CONFIG_DVB_TDA826X is not set
+# CONFIG_DVB_TDA827X is not set
+# CONFIG_DVB_TUNER_QT1010 is not set
+# CONFIG_DVB_TUNER_MT2060 is not set
+
+#
+# Miscellaneous devices
+#
+# CONFIG_DVB_LNBP21 is not set
+# CONFIG_DVB_ISL6421 is not set
+# CONFIG_DVB_TUA6100 is not set
CONFIG_DAB=y
#
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
# CONFIG_INFINIBAND is not set
-
-#
-# Real Time Clock
-#
# CONFIG_RTC_CLASS is not set
#
# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_KERNEL_WITH_GDB_STUB is not set
CONFIG_SH64_PROC_TLB=y
CONFIG_SH64_PROC_ASIDS=y
CONFIG_SH64_SR_WATCH=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc8
+# Mon Oct 1 18:01:38 2007
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH64=y
+CONFIG_MMU=y
+CONFIG_QUICKLIST=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System type
+#
+# CONFIG_SH_SIMULATOR is not set
+# CONFIG_SH_CAYMAN is not set
+CONFIG_SH_HARP=y
+CONFIG_CPU_SH5=y
+CONFIG_CPU_SUBTYPE_SH5_101=y
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+CONFIG_LITTLE_ENDIAN=y
+# CONFIG_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH64_FPU_DENORM_FLUSH is not set
+CONFIG_SH64_PGTABLE_2_LEVEL=y
+# CONFIG_SH64_PGTABLE_3_LEVEL is not set
+CONFIG_HUGETLB_PAGE_SIZE_64K=y
+# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
+CONFIG_SH64_USER_MISALIGNED_FIXUP=y
+
+#
+# Memory options
+#
+CONFIG_CACHED_MEMORY_OFFSET=0x20000000
+CONFIG_MEMORY_START=0x80000000
+CONFIG_MEMORY_SIZE_IN_MB=128
+
+#
+# Cache options
+#
+CONFIG_DCACHE_WRITE_BACK=y
+# CONFIG_DCACHE_WRITE_THROUGH is not set
+# CONFIG_DCACHE_DISABLED is not set
+# CONFIG_ICACHE_DISABLED is not set
+CONFIG_PCIDEVICE_MEMORY_START=C0000000
+CONFIG_DEVICE_MEMORY_START=E0000000
+CONFIG_FLASH_MEMORY_START=0x00000000
+CONFIG_PCI_BLOCK_START=0x40000000
+
+#
+# CPU Subtype specific options
+#
+CONFIG_SH64_ID2815_WORKAROUND=y
+
+#
+# Misc options
+#
+# CONFIG_SH_DMA is not set
+CONFIG_PREEMPT=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=1
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_STNIC is not set
+# CONFIG_SMC91X is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=2
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_SUPERH_MONO is not set
+# CONFIG_LOGO_SUPERH_VGA16 is not set
+CONFIG_LOGO_SUPERH_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_MINIX_FS=y
+CONFIG_ROMFS_FS=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DEBUG_KERNEL_WITH_GDB_STUB is not set
+CONFIG_SH64_PROC_TLB=y
+CONFIG_SH64_PROC_ASIDS=y
+CONFIG_SH64_SR_WATCH=y
+# CONFIG_POOR_MANS_STRACE is not set
+# CONFIG_SH_ALPHANUMERIC is not set
+# CONFIG_SH_NO_BSS_INIT is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc8
+# Mon Oct 1 17:50:35 2007
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH64=y
+CONFIG_MMU=y
+CONFIG_QUICKLIST=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_USER_NS is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System type
+#
+CONFIG_SH_SIMULATOR=y
+# CONFIG_SH_CAYMAN is not set
+# CONFIG_SH_HARP is not set
+CONFIG_CPU_SH5=y
+CONFIG_CPU_SUBTYPE_SH5_101=y
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+CONFIG_LITTLE_ENDIAN=y
+# CONFIG_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH64_FPU_DENORM_FLUSH is not set
+CONFIG_SH64_PGTABLE_2_LEVEL=y
+# CONFIG_SH64_PGTABLE_3_LEVEL is not set
+CONFIG_HUGETLB_PAGE_SIZE_64K=y
+# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
+CONFIG_SH64_USER_MISALIGNED_FIXUP=y
+
+#
+# Memory options
+#
+CONFIG_CACHED_MEMORY_OFFSET=0x20000000
+CONFIG_MEMORY_START=0x80000000
+CONFIG_MEMORY_SIZE_IN_MB=128
+
+#
+# Cache options
+#
+# CONFIG_DCACHE_WRITE_BACK is not set
+# CONFIG_DCACHE_WRITE_THROUGH is not set
+CONFIG_DCACHE_DISABLED=y
+# CONFIG_ICACHE_DISABLED is not set
+CONFIG_PCIDEVICE_MEMORY_START=C0000000
+CONFIG_DEVICE_MEMORY_START=E0000000
+CONFIG_FLASH_MEMORY_START=0x00000000
+CONFIG_PCI_BLOCK_START=0x40000000
+
+#
+# CPU Subtype specific options
+#
+CONFIG_SH64_ID2815_WORKAROUND=y
+
+#
+# Misc options
+#
+# CONFIG_SH_DMA is not set
+CONFIG_PREEMPT=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=1
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=2
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_SUPERH_MONO is not set
+# CONFIG_LOGO_SUPERH_VGA16 is not set
+CONFIG_LOGO_SUPERH_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+CONFIG_MINIX_FS=y
+CONFIG_ROMFS_FS=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+# CONFIG_OPROFILE is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DEBUG_KERNEL_WITH_GDB_STUB is not set
+CONFIG_SH64_PROC_TLB=y
+CONFIG_SH64_PROC_ASIDS=y
+CONFIG_SH64_SR_WATCH=y
+# CONFIG_POOR_MANS_STRACE is not set
+# CONFIG_SH_ALPHANUMERIC is not set
+CONFIG_SH_NO_BSS_INIT=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
obj-$(CONFIG_SH_FPU) += fpu.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_KALLSYMS) += unwind.o
-obj-$(CONFIG_PCI) += pci-dma.o pcibios.o
+obj-$(CONFIG_PCI) += pcibios.o
obj-$(CONFIG_MODULES) += module.o
ifeq ($(CONFIG_PCI),y)
#include <linux/sched.h>
void mach_alphanum(int pos, unsigned char val);
-void mach_led(int pos, int val);
void print_seg(char *file, int line)
{
/* platform dependent support */
EXPORT_SYMBOL(dump_fpu);
-EXPORT_SYMBOL(iounmap);
-EXPORT_SYMBOL(enable_irq);
-EXPORT_SYMBOL(disable_irq);
EXPORT_SYMBOL(kernel_thread);
/* Networking helper routines. */
EXPORT_SYMBOL(csum_partial_copy_nocheck);
-EXPORT_SYMBOL(strstr);
-
#ifdef CONFIG_VT
EXPORT_SYMBOL(screen_info);
#endif
EXPORT_SYMBOL(__up);
EXPORT_SYMBOL(__put_user_asm_l);
EXPORT_SYMBOL(__get_user_asm_l);
-EXPORT_SYMBOL(memcmp);
+EXPORT_SYMBOL(__copy_user);
EXPORT_SYMBOL(memcpy);
-EXPORT_SYMBOL(memset);
-EXPORT_SYMBOL(memscan);
-EXPORT_SYMBOL(strchr);
-EXPORT_SYMBOL(strlen);
-
+EXPORT_SYMBOL(udelay);
+EXPORT_SYMBOL(__udelay);
+EXPORT_SYMBOL(ndelay);
+EXPORT_SYMBOL(__ndelay);
EXPORT_SYMBOL(flush_dcache_page);
-
-/* For ext3 */
EXPORT_SYMBOL(sh64_page_clear);
/* Ugh. These come in from libgcc.a at link time. */
+#define DECLARE_EXPORT(name) extern void name(void);EXPORT_SYMBOL(name)
-extern void __sdivsi3(void);
-extern void __muldi3(void);
-extern void __udivsi3(void);
-extern char __div_table;
-EXPORT_SYMBOL(__sdivsi3);
-EXPORT_SYMBOL(__muldi3);
-EXPORT_SYMBOL(__udivsi3);
-EXPORT_SYMBOL(__div_table);
-
-
+DECLARE_EXPORT(__sdivsi3);
+DECLARE_EXPORT(__muldi3);
+DECLARE_EXPORT(__udivsi3);
return IRQ_HANDLED;
}
-static struct irqaction irq0 = { timer_interrupt, IRQF_DISABLED, CPU_MASK_NONE, "timer", NULL, NULL};
-static struct irqaction irq1 = { sh64_rtc_interrupt, IRQF_DISABLED, CPU_MASK_NONE, "rtc", NULL, NULL};
+static struct irqaction irq0 = {
+ .handler = timer_interrupt,
+ .flags = IRQF_DISABLED,
+ .mask = CPU_MASK_NONE,
+ .name = "timer",
+};
+static struct irqaction irq1 = {
+ .handler = sh64_rtc_interrupt,
+ .flags = IRQF_DISABLED,
+ .mask = CPU_MASK_NONE,
+ .name = "rtc",
+};
void __init time_init(void)
{
#define LOAD_OFFSET CONFIG_CACHED_MEMORY_OFFSET
#include <asm-generic/vmlinux.lds.h>
-#ifdef NOTDEF
-#ifdef CONFIG_LITTLE_ENDIAN
-OUTPUT_FORMAT("elf32-sh64l-linux", "elf32-sh64l-linux", "elf32-sh64l-linux")
-#else
-OUTPUT_FORMAT("elf32-sh64", "elf32-sh64", "elf32-sh64")
-#endif
-#endif
-
OUTPUT_ARCH(sh:sh5)
#define C_PHYS(x) AT (ADDR(x) - LOAD_OFFSET)
__ex_table : C_PHYS(__ex_table) { *(__ex_table) }
__stop___ex_table = .;
- RODATA
-
_etext = .; /* End of text section */
+ NOTES
+
+ RODATA
+
.data : C_PHYS(.data) { /* Data */
DATA_DATA
CONSTRUCTORS
. = ALIGN(PAGE_SIZE);
.data.page_aligned : C_PHYS(.data.page_aligned) { *(.data.page_aligned) }
- . = ALIGN(PAGE_SIZE);
- __per_cpu_start = .;
- .data.percpu : C_PHYS(.data.percpu) {
- *(.data.percpu)
- *(.data.percpu.shared_aligned)
- }
- __per_cpu_end = . ;
+ PERCPU(PAGE_SIZE)
+
+ . = ALIGN(L1_CACHE_BYTES);
.data.cacheline_aligned : C_PHYS(.data.cacheline_aligned) { *(.data.cacheline_aligned) }
_edata = .; /* End of data section */
*(.exitcall.exit)
}
- /* Stabs debugging sections. */
- .stab 0 : C_PHYS(.stab) { *(.stab) }
- .stabstr 0 : C_PHYS(.stabstr) { *(.stabstr) }
- .stab.excl 0 : C_PHYS(.stab.excl) { *(.stab.excl) }
- .stab.exclstr 0 : C_PHYS(.stab.exclstr) { *(.stab.exclstr) }
- .stab.index 0 : C_PHYS(.stab.index) { *(.stab.index) }
- .stab.indexstr 0 : C_PHYS(.stab.indexstr) { *(.stab.indexstr) }
- .comment 0 : C_PHYS(.comment) { *(.comment) }
- /* DWARF debug sections.
- Symbols in the DWARF debugging section are relative to the beginning
- of the section so we begin .debug at 0. */
- /* DWARF 1 */
- .debug 0 : C_PHYS(.debug) { *(.debug) }
- .line 0 : C_PHYS(.line) { *(.line) }
- /* GNU DWARF 1 extensions */
- .debug_srcinfo 0 : C_PHYS(.debug_srcinfo) { *(.debug_srcinfo) }
- .debug_sfnames 0 : C_PHYS(.debug_sfnames) { *(.debug_sfnames) }
- /* DWARF 1.1 and DWARF 2 */
- .debug_aranges 0 : C_PHYS(.debug_aranges) { *(.debug_aranges) }
- .debug_pubnames 0 : C_PHYS(.debug_pubnames) { *(.debug_pubnames) }
- /* DWARF 2 */
- .debug_info 0 : C_PHYS(.debug_info) { *(.debug_info) }
- .debug_abbrev 0 : C_PHYS(.debug_abbrev) { *(.debug_abbrev) }
- .debug_line 0 : C_PHYS(.debug_line) { *(.debug_line) }
- .debug_frame 0 : C_PHYS(.debug_frame) { *(.debug_frame) }
- .debug_str 0 : C_PHYS(.debug_str) { *(.debug_str) }
- .debug_loc 0 : C_PHYS(.debug_loc) { *(.debug_loc) }
- .debug_macinfo 0 : C_PHYS(.debug_macinfo) { *(.debug_macinfo) }
- /* SGI/MIPS DWARF 2 extensions */
- .debug_weaknames 0 : C_PHYS(.debug_weaknames) { *(.debug_weaknames) }
- .debug_funcnames 0 : C_PHYS(.debug_funcnames) { *(.debug_funcnames) }
- .debug_typenames 0 : C_PHYS(.debug_typenames) { *(.debug_typenames) }
- .debug_varnames 0 : C_PHYS(.debug_varnames) { *(.debug_varnames) }
- /* These must appear regardless of . */
+ STABS_DEBUG
+ DWARF_DEBUG
}
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/kernel.h>
+#include <linux/module.h>
#include <asm/byteorder.h>
#include <asm/uaccess.h>
if (odd)
result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
- pr_debug("\nCHECKSUM is 0x%x\n", result);
+ pr_debug("\nCHECKSUM is 0x%lx\n", result);
out:
return result;
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/delay.h>
+#include <linux/module.h>
#include <asm/system.h>
#include <asm/processor.h>
#include <asm/io.h>
-/*
- * readX/writeX() are used to access memory mapped devices. On some
- * architectures the memory mapped IO stuff needs to be accessed
- * differently. On the SuperH architecture, we just read/write the
- * memory location directly.
- */
-
-/* This is horrible at the moment - needs more work to do something sensible */
-#define IO_DELAY()
-
-#define OUT_DELAY(x,type) \
-void out##x##_p(unsigned type value,unsigned long port){out##x(value,port);IO_DELAY();}
-
-#define IN_DELAY(x,type) \
-unsigned type in##x##_p(unsigned long port) {unsigned type tmp=in##x(port);IO_DELAY();return tmp;}
-
-#if 1
-OUT_DELAY(b, long) OUT_DELAY(w, long) OUT_DELAY(l, long)
- IN_DELAY(b, long) IN_DELAY(w, long) IN_DELAY(l, long)
-#endif
/* Now for the string version of these functions */
void outsb(unsigned long port, const void *addr, unsigned long count)
{
outb(*p, port);
}
}
+EXPORT_SYMBOL(outsb);
void insb(unsigned long port, void *addr, unsigned long count)
{
*p = inb(port);
}
}
+EXPORT_SYMBOL(insb);
/* For the 16 and 32 bit string functions, we have to worry about alignment.
* The SH does not do unaligned accesses, so we have to read as bytes and
outw(tmp, port);
}
}
+EXPORT_SYMBOL(outsw);
void insw(unsigned long port, void *addr, unsigned long count)
{
p[1] = (tmp >> 8) & 0xff;
}
}
+EXPORT_SYMBOL(insw);
void outsl(unsigned long port, const void *addr, unsigned long count)
{
outl(tmp, port);
}
}
+EXPORT_SYMBOL(outsl);
void insl(unsigned long port, void *addr, unsigned long count)
{
}
}
+EXPORT_SYMBOL(insl);
void memcpy_toio(void __iomem *to, const void *from, long count)
{
writeb(*p++, to++);
}
}
+EXPORT_SYMBOL(memcpy_toio);
void memcpy_fromio(void *to, void __iomem *from, long count)
{
from++;
}
}
+EXPORT_SYMBOL(memcpy_fromio);
{
return (void __iomem *)port;
}
+EXPORT_SYMBOL(ioport_map);
void ioport_unmap(void __iomem *addr)
{
/* Nothing .. */
}
+EXPORT_SYMBOL(ioport_unmap);
+#ifdef CONFIG_PCI
void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max)
{
unsigned long start = pci_resource_start(dev, bar);
/* What? */
return NULL;
}
+EXPORT_SYMBOL(pci_iomap);
void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
{
/* Nothing .. */
}
-
-EXPORT_SYMBOL(ioport_map);
-EXPORT_SYMBOL(ioport_unmap);
-EXPORT_SYMBOL(pci_iomap);
EXPORT_SYMBOL(pci_iounmap);
-
+#endif
* lethal@linux-sh.org: 15th May 2003
* Use the generic procfs cpuinfo interface, just return a valid board name.
*/
-
-#include <linux/stddef.h>
#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-#include <linux/delay.h>
#include <linux/kernel.h>
-#include <linux/seq_file.h>
-#include <asm/processor.h>
#include <asm/platform.h>
-#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/page.h>
+#include <asm/io.h>
/*
* Platform Dependent Interrupt Priorities.
-#
-# Makefile for the ST50 Harp specific parts of the kernel
-#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-
-O_TARGET := harp.o
-
obj-y := setup.o
-
-include $(TOPDIR)/Rules.make
-
* lethal@linux-sh.org: 15th May 2003
* Use the generic procfs cpuinfo interface, just return a valid board name.
*/
-
-#include <linux/stddef.h>
#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-#include <linux/delay.h>
#include <linux/kernel.h>
-#include <asm/processor.h>
#include <asm/platform.h>
-#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/page.h>
-
-#define RES_COUNT(res) ((sizeof((res))/sizeof(struct resource)))
/*
* Platform Dependent Interrupt Priorities.
};
struct resource kram_resources[] = {
- { "Kernel code", 0, 0 }, /* These must be last in the array */
- { "Kernel data", 0, 0 } /* These must be last in the array */
+ /* These must be last in the array */
+ { .name = "Kernel code", .start = 0, .end = 0 },
+ /* These must be last in the array */
+ { .name = "Kernel data", .start = 0, .end = 0 }
};
struct resource xram_resources[] = {
.initial_root_dev = 0x0100,
.loader_type = 1,
.io_res_p = io_resources,
- .io_res_count = RES_COUNT(io_resources),
+ .io_res_count = ARRAY_SIZE(io_resources),
.kram_res_p = kram_resources,
- .kram_res_count = RES_COUNT(kram_resources),
+ .kram_res_count = ARRAY_SIZE(kram_resources),
.xram_res_p = xram_resources,
- .xram_res_count = RES_COUNT(xram_resources),
+ .xram_res_count = ARRAY_SIZE(xram_resources),
.rom_res_p = rom_resources,
- .rom_res_count = RES_COUNT(rom_resources),
+ .rom_res_count = ARRAY_SIZE(rom_resources),
};
int platform_int_priority[NR_INTC_IRQS] = {
{
return "ST50 Harp";
}
-
+++ /dev/null
-#
-# Makefile for the SH-5 ROM/RAM specific parts of the kernel
-#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-
-O_TARGET := romram.o
-
-obj-y := setup.o
-
-include $(TOPDIR)/Rules.make
-
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * arch/sh64/mach-romram/setup.c
- *
- * SH-5 ROM/RAM Platform Support
- *
- * This file handles the architecture-dependent parts of initialization
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- *
- * benedict.gaster@superh.com: 3rd May 2002
- * Added support for ramdisk, removing statically linked romfs at the same time. *
- *
- * lethal@linux-sh.org: 15th May 2003
- * Use the generic procfs cpuinfo interface, just return a valid board name.
- *
- * Sean.McGoogan@superh.com 17th Feb 2004
- * copied from arch/sh64/mach-harp/setup.c
- */
-
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <asm/processor.h>
-#include <asm/platform.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/page.h>
-
-#define RES_COUNT(res) ((sizeof((res))/sizeof(struct resource)))
-
-/*
- * Platform Dependent Interrupt Priorities.
- */
-
-/* Using defaults defined in irq.h */
-#define RES NO_PRIORITY /* Disabled */
-#define IR0 IRL0_PRIORITY /* IRLs */
-#define IR1 IRL1_PRIORITY
-#define IR2 IRL2_PRIORITY
-#define IR3 IRL3_PRIORITY
-#define PCA INTA_PRIORITY /* PCI Ints */
-#define PCB INTB_PRIORITY
-#define PCC INTC_PRIORITY
-#define PCD INTD_PRIORITY
-#define SER TOP_PRIORITY
-#define ERR TOP_PRIORITY
-#define PW0 TOP_PRIORITY
-#define PW1 TOP_PRIORITY
-#define PW2 TOP_PRIORITY
-#define PW3 TOP_PRIORITY
-#define DM0 NO_PRIORITY /* DMA Ints */
-#define DM1 NO_PRIORITY
-#define DM2 NO_PRIORITY
-#define DM3 NO_PRIORITY
-#define DAE NO_PRIORITY
-#define TU0 TIMER_PRIORITY /* TMU Ints */
-#define TU1 NO_PRIORITY
-#define TU2 NO_PRIORITY
-#define TI2 NO_PRIORITY
-#define ATI NO_PRIORITY /* RTC Ints */
-#define PRI NO_PRIORITY
-#define CUI RTC_PRIORITY
-#define ERI SCIF_PRIORITY /* SCIF Ints */
-#define RXI SCIF_PRIORITY
-#define BRI SCIF_PRIORITY
-#define TXI SCIF_PRIORITY
-#define ITI TOP_PRIORITY /* WDT Ints */
-
-/*
- * Platform dependent structures: maps and parms block.
- */
-struct resource io_resources[] = {
- /* To be updated with external devices */
-};
-
-struct resource kram_resources[] = {
- { "Kernel code", 0, 0 }, /* These must be last in the array */
- { "Kernel data", 0, 0 } /* These must be last in the array */
-};
-
-struct resource xram_resources[] = {
- /* To be updated with external devices */
-};
-
-struct resource rom_resources[] = {
- /* To be updated with external devices */
-};
-
-struct sh64_platform platform_parms = {
- .readonly_rootfs = 1,
- .initial_root_dev = 0x0100,
- .loader_type = 1,
- .io_res_p = io_resources,
- .io_res_count = RES_COUNT(io_resources),
- .kram_res_p = kram_resources,
- .kram_res_count = RES_COUNT(kram_resources),
- .xram_res_p = xram_resources,
- .xram_res_count = RES_COUNT(xram_resources),
- .rom_res_p = rom_resources,
- .rom_res_count = RES_COUNT(rom_resources),
-};
-
-int platform_int_priority[NR_INTC_IRQS] = {
- IR0, IR1, IR2, IR3, PCA, PCB, PCC, PCD, /* IRQ 0- 7 */
- RES, RES, RES, RES, SER, ERR, PW3, PW2, /* IRQ 8-15 */
- PW1, PW0, DM0, DM1, DM2, DM3, DAE, RES, /* IRQ 16-23 */
- RES, RES, RES, RES, RES, RES, RES, RES, /* IRQ 24-31 */
- TU0, TU1, TU2, TI2, ATI, PRI, CUI, ERI, /* IRQ 32-39 */
- RXI, BRI, TXI, RES, RES, RES, RES, RES, /* IRQ 40-47 */
- RES, RES, RES, RES, RES, RES, RES, RES, /* IRQ 48-55 */
- RES, RES, RES, RES, RES, RES, RES, ITI, /* IRQ 56-63 */
-};
-
-void __init platform_setup(void)
-{
- /* ROM/RAM platform leaves the decision to head.S, for now */
- platform_parms.fpu_flags = fpu_in_use;
-}
-
-void __init platform_monitor(void)
-{
- /* Nothing yet .. */
-}
-
-void __init platform_reserve(void)
-{
- /* Nothing yet .. */
-}
-
-const char *get_system_type(void)
-{
- return "ROM/RAM";
-}
-
-#
-# Makefile for the SH-5 Simulator specific parts of the kernel
-#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-
-O_TARGET := sim.o
-
obj-y := setup.o
-
-include $(TOPDIR)/Rules.make
-
* lethal@linux-sh.org: 15th May 2003
* Use the generic procfs cpuinfo interface, just return a valid board name.
*/
-
-#include <linux/stddef.h>
#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-#include <linux/delay.h>
#include <linux/kernel.h>
-#include <asm/addrspace.h>
-#include <asm/processor.h>
#include <asm/platform.h>
-#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/page.h>
-
-#ifdef CONFIG_BLK_DEV_INITRD
-#include "../rootfs/rootfs.h"
-#endif
-
-static __init void platform_monitor(void);
-static __init void platform_setup(void);
-static __init void platform_reserve(void);
-
-
-#define PHYS_MEMORY CONFIG_MEMORY_SIZE_IN_MB*1024*1024
-
-#if (PHYS_MEMORY < P1SEG_FOOTPRINT_RAM)
-#error "Invalid kernel configuration. Physical memory below footprint requirements."
-#endif
-
-#define RAM_DISK_START CONFIG_MEMORY_START+P1SEG_INITRD_BLOCK /* Top of 4MB */
-#ifdef PLATFORM_ROMFS_SIZE
-#define RAM_DISK_SIZE (PAGE_ALIGN(PLATFORM_ROMFS_SIZE)) /* Variable Top */
-#if ((RAM_DISK_START + RAM_DISK_SIZE) > (CONFIG_MEMORY_START + PHYS_MEMORY))
-#error "Invalid kernel configuration. ROM RootFS exceeding physical memory."
-#endif
-#else
-#define RAM_DISK_SIZE P1SEG_INITRD_BLOCK_SIZE /* Top of 4MB */
-#endif
-
-#define RES_COUNT(res) ((sizeof((res))/sizeof(struct resource)))
/*
* Platform Dependent Interrupt Priorities.
};
struct resource kram_resources[] = {
- { "Kernel code", 0, 0 }, /* These must be last in the array */
- { "Kernel data", 0, 0 } /* These must be last in the array */
+ /* These must be last in the array */
+ { .name = "Kernel code", .start = 0, .end = 0 },
+ /* These must be last in the array */
+ { .name = "Kernel data", .start = 0, .end = 0 }
};
struct resource xram_resources[] = {
.readonly_rootfs = 1,
.initial_root_dev = 0x0100,
.loader_type = 1,
- .initrd_start = RAM_DISK_START,
- .initrd_size = RAM_DISK_SIZE,
.io_res_p = io_resources,
- .io_res_count = RES_COUNT(io_resources),
+ .io_res_count = ARRAY_SIZE(io_resources),
.kram_res_p = kram_resources,
- .kram_res_count = RES_COUNT(kram_resources),
+ .kram_res_count = ARRAY_SIZE(kram_resources),
.xram_res_p = xram_resources,
- .xram_res_count = RES_COUNT(xram_resources),
+ .xram_res_count = ARRAY_SIZE(xram_resources),
.rom_res_p = rom_resources,
- .rom_res_count = RES_COUNT(rom_resources),
+ .rom_res_count = ARRAY_SIZE(rom_resources),
};
int platform_int_priority[NR_IRQS] = {
{
return "SH-5 Simulator";
}
-
# unless it's something special (ie not a .c file).
#
-obj-y := init.o fault.o ioremap.o extable.o cache.o tlbmiss.o tlb.o
+obj-y := cache.o consistent.o extable.o fault.o init.o ioremap.o \
+ tlbmiss.o tlb.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
-ffixed-r41 -ffixed-r42 -ffixed-r43 \
-ffixed-r60 -ffixed-r61 -ffixed-r62 \
-fomit-frame-pointer
-
#include <linux/mm.h>
#include <linux/string.h>
#include <linux/pci.h>
+#include <linux/module.h>
#include <asm/io.h>
void *consistent_alloc(struct pci_dev *hwdev, size_t size,
return vp;
}
+EXPORT_SYMBOL(consistent_alloc);
void consistent_free(struct pci_dev *hwdev, size_t size,
void *vaddr, dma_addr_t dma_handle)
iounmap(vaddr);
}
-
+EXPORT_SYMBOL(consistent_free);
#include <asm/pgtable.h>
#include <asm/tlb.h>
-#ifdef CONFIG_BLK_DEV_INITRD
-#include <linux/blk.h>
-#endif
-
DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
/*
#include <linux/sched.h>
#include <linux/string.h>
#include <linux/io.h>
-#include <asm/pgalloc.h>
-#include <asm/tlbflush.h>
#include <linux/ioport.h>
#include <linux/bootmem.h>
#include <linux/proc_fs.h>
+#include <linux/module.h>
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
static void shmedia_mapioaddr(unsigned long, unsigned long);
static unsigned long shmedia_ioremap(struct resource *, u32, int);
}
return (void *) (offset + (char *)addr);
}
+EXPORT_SYMBOL(__ioremap);
void iounmap(void *addr)
{
kfree(area);
}
+EXPORT_SYMBOL(iounmap);
static struct resource shmedia_iomap = {
.name = "shmedia_iomap",
void outsl(unsigned long port, const void *addr, unsigned long count);
void insl(unsigned long port, void *addr, unsigned long count);
+#define inb_p(addr) inb(addr)
+#define inw_p(addr) inw(addr)
+#define inl_p(addr) inl(addr)
+#define outb_p(x,addr) outb(x,addr)
+#define outw_p(x,addr) outw(x,addr)
+#define outl_p(x,addr) outl(x,addr)
+
#define __raw_readb readb
#define __raw_readw readw
#define __raw_readl readl
projects / linux-2.6-omap-h63xx.git / commitdiff