card->link_speed = link_speed;
        card->guid = guid;
 
-       /* FIXME: add #define's for phy registers. */
        /* Activate link_on bit and contender bit in our self ID packets.*/
-       if (card->driver->update_phy_reg(card, 4, 0, 0x80 | 0x40) < 0)
+       if (card->driver->update_phy_reg(card, 4, 0,
+                                        PHY_LINK_ACTIVE | PHY_CONTENDER) < 0)
                return -EIO;
 
        /* The subsystem grabs a reference when the card is added and
 void
 fw_core_remove_card(struct fw_card *card)
 {
-       card->driver->update_phy_reg(card, 4, 0x80 | 0x40, 0);
+       card->driver->update_phy_reg(card, 4,
+                                    PHY_LINK_ACTIVE | PHY_CONTENDER, 0);
        fw_core_initiate_bus_reset(card, 1);
 
        down_write(&fw_bus_type.subsys.rwsem);
 int
 fw_core_initiate_bus_reset(struct fw_card *card, int short_reset)
 {
-       return card->driver->update_phy_reg(card, short_reset ? 5 : 1, 0, 0x40);
+       int reg = short_reset ? 5 : 1;
+       /* The following values happen to be the same bit. However be
+        * explicit for clarity. */
+       int bit = short_reset ? PHY_BUS_SHORT_RESET : PHY_BUS_RESET;
+
+       return card->driver->update_phy_reg(card, reg, 0, bit);
 }
 EXPORT_SYMBOL(fw_core_initiate_bus_reset);
 
 #define PHY_PACKET_LINK_ON     0x1
 #define PHY_PACKET_SELF_ID     0x2
 
+/* Bit fields _within_ the PHY registers. */
+#define PHY_LINK_ACTIVE                0x80
+#define PHY_CONTENDER          0x40
+#define PHY_BUS_RESET          0x40
+#define PHY_BUS_SHORT_RESET    0x40
+
 #define CSR_REGISTER_BASE              0xfffff0000000ULL
 
 /* register offsets relative to CSR_REGISTER_BASE */