+++ /dev/null
-To configure the Crystal CS423x sound chip and activate its DSP functions,
-modules may be loaded in this order:
-  
-       modprobe sound
-       insmod ad1848
-       insmod uart401
-       insmod cs4232 io=* irq=* dma=* dma2=*
-  
-This is the meaning of the parameters:
-  
-       io--I/O address of the Windows Sound System (normally 0x534)
-       irq--IRQ of this device
-       dma and dma2--DMA channels (DMA2 may be 0)
-  
-On some cards, the board attempts to do non-PnP setup, and fails.  If you
-have problems, use Linux' PnP facilities. 
-  
-To get MIDI facilities add
-  
-       insmod opl3 io=*
-  
-where "io" is the I/O address of the OPL3 synthesizer. This will be shown
-in /proc/sys/pnp and is normally 0x388.