sbirq - IRQ # for CMI8330 chip (SB16)
sbdma8 - 8bit DMA # for CMI8330 chip (SB16)
sbdma16 - 16bit DMA # for CMI8330 chip (SB16)
+ fmport - (optional) OPL3 I/O port
+ mpuport - (optional) MPU401 I/O port
+ mpuirq - (optional) MPU401 irq #
This module supports multiple cards and autoprobe.
The power-management is supported.
- Module snd-cs4232
- -----------------
-
- Module for sound cards based on CS4232/CS4232A ISA chips.
-
- isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
-
- with isapnp=0, the following options are available:
-
- port - port # for CS4232 chip (PnP setup - 0x534)
- cport - control port # for CS4232 chip (PnP setup - 0x120,0x210,0xf00)
- mpu_port - port # for MPU-401 UART (PnP setup - 0x300), -1 = disable
- fm_port - FM port # for CS4232 chip (PnP setup - 0x388), -1 = disable
- irq - IRQ # for CS4232 chip (5,7,9,11,12,15)
- mpu_irq - IRQ # for MPU-401 UART (9,11,12,15)
- dma1 - first DMA # for CS4232 chip (0,1,3)
- dma2 - second DMA # for Yamaha CS4232 chip (0,1,3), -1 = disable
-
- This module supports multiple cards. This module does not support autoprobe
- (if ISA PnP is not used) thus main port must be specified!!! Other ports are
- optional.
-
- The power-management is supported.
-
Module snd-cs4236
-----------------
- Module for sound cards based on CS4235/CS4236/CS4236B/CS4237B/
+ Module for sound cards based on CS4232/CS4232A,
+ CS4235/CS4236/CS4236B/CS4237B/
CS4238B/CS4239 ISA chips.
isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
The power-management is supported.
+ This module is aliased as snd-cs4232 since it provides the old
+ snd-cs4232 functionality, too.
+
Module snd-cs4281
-----------------
Module for ESS AudioDrive ES-1688 and ES-688 sound cards.
port - port # for ES-1688 chip (0x220,0x240,0x260)
+ fm_port - port # for OPL3 (option; share the same port as default)
mpu_port - port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default)
irq - IRQ # for ES-1688 chip (5,7,9,10)
mpu_irq - IRQ # for MPU-401 port (5,7,9,10)
model - force the model name
position_fix - Fix DMA pointer (0 = auto, 1 = use LPIB, 2 = POSBUF)
probe_mask - Bitmask to probe codecs (default = -1, meaning all slots)
+ When the bit 8 (0x100) is set, the lower 8 bits are used
+ as the "fixed" codec slots; i.e. the driver probes the
+ slots regardless what hardware reports back
probe_only - Only probing and no codec initialization (default=off);
Useful to check the initial codec status for debugging
bdl_pos_adj - Specifies the DMA IRQ timing delay in samples.
/* HD codec */
unsigned short codec_mask;
+ int codec_probe_mask; /* copied from probe_mask option */
struct hda_bus *bus;
/* CORB/RIRB */
SD_CTL_DMA_START | SD_INT_MASK);
}
- /* stop a stream */
- static void azx_stream_stop(struct azx *chip, struct azx_dev *azx_dev)
+ /* stop DMA */
+ static void azx_stream_clear(struct azx *chip, struct azx_dev *azx_dev)
{
- /* stop DMA */
azx_sd_writeb(azx_dev, SD_CTL, azx_sd_readb(azx_dev, SD_CTL) &
~(SD_CTL_DMA_START | SD_INT_MASK));
azx_sd_writeb(azx_dev, SD_STS, SD_INT_MASK); /* to be sure */
+ }
+
+ /* stop a stream */
+ static void azx_stream_stop(struct azx *chip, struct azx_dev *azx_dev)
+ {
+ azx_stream_clear(chip, azx_dev);
/* disable SIE */
azx_writeb(chip, INTCTL,
azx_readb(chip, INTCTL) & ~(1 << azx_dev->index));
azx_sd_writel(azx_dev, SD_BDLPL, 0);
azx_sd_writel(azx_dev, SD_BDLPU, 0);
- period_bytes = snd_pcm_lib_period_bytes(substream);
- azx_dev->period_bytes = period_bytes;
+ period_bytes = azx_dev->period_bytes;
periods = azx_dev->bufsize / period_bytes;
/* program the initial BDL entries */
error:
snd_printk(KERN_ERR "Too many BDL entries: buffer=%d, period=%d\n",
azx_dev->bufsize, period_bytes);
- /* reset */
- azx_sd_writel(azx_dev, SD_BDLPL, 0);
- azx_sd_writel(azx_dev, SD_BDLPU, 0);
return -EINVAL;
}
- /*
- * set up the SD for streaming
- */
- static int azx_setup_controller(struct azx *chip, struct azx_dev *azx_dev)
+ /* reset stream */
+ static void azx_stream_reset(struct azx *chip, struct azx_dev *azx_dev)
{
unsigned char val;
int timeout;
- /* make sure the run bit is zero for SD */
- azx_sd_writeb(azx_dev, SD_CTL, azx_sd_readb(azx_dev, SD_CTL) &
- ~SD_CTL_DMA_START);
- /* reset stream */
+ azx_stream_clear(chip, azx_dev);
+
azx_sd_writeb(azx_dev, SD_CTL, azx_sd_readb(azx_dev, SD_CTL) |
SD_CTL_STREAM_RESET);
udelay(3);
while (((val = azx_sd_readb(azx_dev, SD_CTL)) & SD_CTL_STREAM_RESET) &&
--timeout)
;
+ }
+ /*
+ * set up the SD for streaming
+ */
+ static int azx_setup_controller(struct azx *chip, struct azx_dev *azx_dev)
+ {
+ /* make sure the run bit is zero for SD */
+ azx_stream_clear(chip, azx_dev);
/* program the stream_tag */
azx_sd_writel(azx_dev, SD_CTL,
(azx_sd_readl(azx_dev, SD_CTL) & ~SD_CTL_STREAM_TAG_MASK)|
};
static int __devinit azx_codec_create(struct azx *chip, const char *model,
- unsigned int codec_probe_mask,
int no_init)
{
struct hda_bus_template bus_temp;
/* First try to probe all given codec slots */
for (c = 0; c < max_slots; c++) {
- if ((chip->codec_mask & (1 << c)) & codec_probe_mask) {
+ if ((chip->codec_mask & (1 << c)) & chip->codec_probe_mask) {
if (probe_codec(chip, c) < 0) {
/* Some BIOSen give you wrong codec addresses
* that don't exist
/* Then create codec instances */
for (c = 0; c < max_slots; c++) {
- if ((chip->codec_mask & (1 << c)) & codec_probe_mask) {
+ if ((chip->codec_mask & (1 << c)) & chip->codec_probe_mask) {
struct hda_codec *codec;
err = snd_hda_codec_new(chip->bus, c, !no_init, &codec);
if (err < 0)
runtime->private_data = azx_dev;
snd_pcm_set_sync(substream);
mutex_unlock(&chip->open_mutex);
+
+ azx_stream_reset(chip, azx_dev);
return 0;
}
static int azx_pcm_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *hw_params)
{
+ struct azx_dev *azx_dev = get_azx_dev(substream);
+
+ azx_dev->bufsize = 0;
+ azx_dev->period_bytes = 0;
+ azx_dev->format_val = 0;
return snd_pcm_lib_malloc_pages(substream,
params_buffer_bytes(hw_params));
}
azx_sd_writel(azx_dev, SD_BDLPL, 0);
azx_sd_writel(azx_dev, SD_BDLPU, 0);
azx_sd_writel(azx_dev, SD_CTL, 0);
+ azx_dev->bufsize = 0;
+ azx_dev->period_bytes = 0;
+ azx_dev->format_val = 0;
hinfo->ops.cleanup(hinfo, apcm->codec, substream);
struct azx_dev *azx_dev = get_azx_dev(substream);
struct hda_pcm_stream *hinfo = apcm->hinfo[substream->stream];
struct snd_pcm_runtime *runtime = substream->runtime;
+ unsigned int bufsize, period_bytes, format_val;
+ int err;
- azx_dev->bufsize = snd_pcm_lib_buffer_bytes(substream);
- azx_dev->format_val = snd_hda_calc_stream_format(runtime->rate,
- runtime->channels,
- runtime->format,
- hinfo->maxbps);
- if (!azx_dev->format_val) {
+ format_val = snd_hda_calc_stream_format(runtime->rate,
+ runtime->channels,
+ runtime->format,
+ hinfo->maxbps);
+ if (!format_val) {
snd_printk(KERN_ERR SFX
"invalid format_val, rate=%d, ch=%d, format=%d\n",
runtime->rate, runtime->channels, runtime->format);
return -EINVAL;
}
+ bufsize = snd_pcm_lib_buffer_bytes(substream);
+ period_bytes = snd_pcm_lib_period_bytes(substream);
+
snd_printdd("azx_pcm_prepare: bufsize=0x%x, format=0x%x\n",
- azx_dev->bufsize, azx_dev->format_val);
- if (azx_setup_periods(chip, substream, azx_dev) < 0)
- return -EINVAL;
+ bufsize, format_val);
+
+ if (bufsize != azx_dev->bufsize ||
+ period_bytes != azx_dev->period_bytes ||
+ format_val != azx_dev->format_val) {
+ azx_dev->bufsize = bufsize;
+ azx_dev->period_bytes = period_bytes;
+ azx_dev->format_val = format_val;
+ err = azx_setup_periods(chip, substream, azx_dev);
+ if (err < 0)
+ return err;
+ }
+
azx_setup_controller(chip, azx_dev);
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
azx_dev->fifo_size = azx_sd_readw(azx_dev, SD_FIFOSIZE) + 1;
SND_PCI_QUIRK(0x1028, 0x20ac, "Dell Studio Desktop", 0x01),
/* including bogus ALC268 in slot#2 that conflicts with ALC888 */
SND_PCI_QUIRK(0x17c0, 0x4085, "Medion MD96630", 0x01),
- /* conflict of ALC268 in slot#3 (digital I/O); a temporary fix */
- SND_PCI_QUIRK(0x1179, 0xff00, "Toshiba laptop", 0x03),
+ /* forced codec slots */
+ SND_PCI_QUIRK(0x1046, 0x1262, "ASUS W5F", 0x103),
{}
};
+ #define AZX_FORCE_CODEC_MASK 0x100
+
static void __devinit check_probe_mask(struct azx *chip, int dev)
{
const struct snd_pci_quirk *q;
- if (probe_mask[dev] == -1) {
+ chip->codec_probe_mask = probe_mask[dev];
+ if (chip->codec_probe_mask == -1) {
q = snd_pci_quirk_lookup(chip->pci, probe_mask_list);
if (q) {
printk(KERN_INFO
"hda_intel: probe_mask set to 0x%x "
"for device %04x:%04x\n",
q->value, q->subvendor, q->subdevice);
- probe_mask[dev] = q->value;
+ chip->codec_probe_mask = q->value;
}
}
+
+ /* check forced option */
+ if (chip->codec_probe_mask != -1 &&
+ (chip->codec_probe_mask & AZX_FORCE_CODEC_MASK)) {
+ chip->codec_mask = chip->codec_probe_mask & 0xff;
+ printk(KERN_INFO "hda_intel: codec_mask forced to 0x%x\n",
+ chip->codec_mask);
+ }
}
return -ENOENT;
}
- card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0);
- if (!card) {
+ err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
+ if (err < 0) {
snd_printk(KERN_ERR SFX "Error creating card!\n");
- return -ENOMEM;
+ return err;
}
err = azx_create(card, pci, dev, pci_id->driver_data, &chip);
card->private_data = chip;
/* create codec instances */
- err = azx_codec_create(chip, model[dev], probe_mask[dev],
- probe_only[dev]);
+ err = azx_codec_create(chip, model[dev], probe_only[dev]);
if (err < 0)
goto out_free;
{ PCI_DEVICE(0x10de, 0x0ac1), .driver_data = AZX_DRIVER_NVIDIA },
{ PCI_DEVICE(0x10de, 0x0ac2), .driver_data = AZX_DRIVER_NVIDIA },
{ PCI_DEVICE(0x10de, 0x0ac3), .driver_data = AZX_DRIVER_NVIDIA },
- { PCI_DEVICE(0x10de, 0x0bd4), .driver_data = AZX_DRIVER_NVIDIA },
- { PCI_DEVICE(0x10de, 0x0bd5), .driver_data = AZX_DRIVER_NVIDIA },
- { PCI_DEVICE(0x10de, 0x0bd6), .driver_data = AZX_DRIVER_NVIDIA },
- { PCI_DEVICE(0x10de, 0x0bd7), .driver_data = AZX_DRIVER_NVIDIA },
+ { PCI_DEVICE(0x10de, 0x0d94), .driver_data = AZX_DRIVER_NVIDIA },
+ { PCI_DEVICE(0x10de, 0x0d95), .driver_data = AZX_DRIVER_NVIDIA },
+ { PCI_DEVICE(0x10de, 0x0d96), .driver_data = AZX_DRIVER_NVIDIA },
+ { PCI_DEVICE(0x10de, 0x0d97), .driver_data = AZX_DRIVER_NVIDIA },
/* Teradici */
{ PCI_DEVICE(0x6549, 0x1200), .driver_data = AZX_DRIVER_TERA },
/* AMD Generic, PCI class code and Vendor ID for HD Audio */
projects / linux-2.6-omap-h63xx.git / commitdiff