* we have a candidate... NAKing is *NOT* an error
                 */
                musb_ep_select(mbase, epnum);
-               musb_writew(epio, MUSB_CSR0,
+               musb_writew(epio, MUSB_TXCSR,
                                MUSB_TXCSR_H_WZC_BITS
                                | MUSB_TXCSR_TXPKTRDY);
                goto finish;
 
 
 /* Dump the current status and compile options.
  * @param musb the device driver instance
- * @param buffer where to dump the status; it must be big enough hold the
+ * @param buffer where to dump the status; it must be big enough to hold the
  * result otherwise "BAD THINGS HAPPENS(TM)".
  */
 static int dump_header_stats(struct musb *musb, char *buffer)
 
                                break;
                        case OTG_STATE_A_WAIT_VFALL:
                                /* REVISIT this irq triggers during short
-                                * spikes causet by enumeration ...
+                                * spikes caused by enumeration ...
                                 */
                                if (musb->vbuserr_retry) {
                                        musb->vbuserr_retry--;
                musb_writel(tbase, TUSB_DMA_INT_CLEAR, dma_src);
        }
 
-       /* EP interrupts. In OCP mode tusb6010 mirrors the MUSB * interrupts */
+       /* EP interrupts. In OCP mode tusb6010 mirrors the MUSB interrupts */
        if (int_src & (TUSB_INT_SRC_USB_IP_TX | TUSB_INT_SRC_USB_IP_RX)) {
                u32     musb_src = musb_readl(tbase, TUSB_USBIP_INT_SRC);
 
 
        /* disable all IRQs */
        musb_writel(tbase, TUSB_INT_MASK, ~TUSB_INT_MASK_RESERVED_BITS);
-       musb_writel(tbase, TUSB_USBIP_INT_MASK, 0);
+       musb_writel(tbase, TUSB_USBIP_INT_MASK, 0x7fffffff);
        musb_writel(tbase, TUSB_DMA_INT_MASK, 0x7fffffff);
        musb_writel(tbase, TUSB_GPIO_INT_MASK, 0x1ff);
 
 
 
        channel->status = MUSB_DMA_STATUS_FREE;
 
-       /* Handle only RX callbacks here. TX callbacks musb be handled based
+       /* Handle only RX callbacks here. TX callbacks must be handled based
         * on the TUSB DMA status interrupt.
         * REVISIT: Use both TUSB DMA status interrupt and OMAP DMA callback
         * interrupt for RX and TX.