[ARM] pxa: add e750 MFP config

Adds MFP configuration for supported e750 hardware.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>

diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c
index 84d7c1aac58d713658a2f2a8de2278e02ad5f86c..7ad76539c8411dd5bd99eef7347a61d3b9ef76da 100644 (file)
--- a/arch/arm/mach-pxa/e750.c
+++ b/arch/arm/mach-pxa/e750.c
@@ -105,6 +105,57 @@ static struct platform_device e750_fb_device = {
        .resource       = e750_fb_resources,
 };
 
+/* -------------------- e750 MFP parameters -------------------- */
+
+static unsigned long e750_pin_config[] __initdata = {
+       /* Chip selects */
+       GPIO15_nCS_1,   /* CS1 - Flash */
+       GPIO79_nCS_3,   /* CS3 - IMAGEON */
+       GPIO80_nCS_4,   /* CS4 - TMIO */
+
+       /* Clocks */
+       GPIO11_3_6MHz,
+
+       /* BTUART */
+       GPIO42_BTUART_RXD,
+       GPIO43_BTUART_TXD,
+       GPIO44_BTUART_CTS,
+
+       /* TMIO controller */
+       GPIO19_GPIO, /* t7l66xb #PCLR */
+       GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
+
+       /* UDC */
+       GPIO13_GPIO,
+       GPIO3_GPIO,
+
+       /* IrDA */
+       GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
+
+       /* PC Card */
+       GPIO8_GPIO,   /* CD0 */
+       GPIO44_GPIO,  /* CD1 */
+       GPIO11_GPIO,  /* IRQ0 */
+       GPIO6_GPIO,   /* IRQ1 */
+       GPIO27_GPIO,  /* RST0 */
+       GPIO24_GPIO,  /* RST1 */
+       GPIO20_GPIO,  /* PWR0 */
+       GPIO23_GPIO,  /* PWR1 */
+       GPIO48_nPOE,
+       GPIO49_nPWE,
+       GPIO50_nPIOR,
+       GPIO51_nPIOW,
+       GPIO52_nPCE_1,
+       GPIO53_nPCE_2,
+       GPIO54_nPSKTSEL,
+       GPIO55_nPREG,
+       GPIO56_nPWAIT,
+       GPIO57_nIOIS16,
+
+       /* wakeup */
+       GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
 /* ----------------- e750 tc6393xb parameters ------------------ */
 
 static struct tc6393xb_platform_data e750_tc6393xb_info = {
@@ -137,6 +188,7 @@ static struct platform_device *devices[] __initdata = {
 
 static void __init e750_init(void)
 {
+       pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
        clk_add_alias("CLK_CK3P6MI", &e750_tc6393xb_device.dev,
                        "GPIO11_CLK", NULL),
        eseries_get_tmio_gpios();