[ARM] JIVE: Add power off on shutdown support

Add pm_power_off hook to allow the Logitech Jive to shutdown
when asked to halt.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 7f5d0025060da682099f7a6f3e46571bb7e98404..7f5924713485e838274e748ebcc53e1a1a654e0c 100644 (file)
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -528,6 +528,14 @@ static void __init jive_map_io(void)
        s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs));
 }
 
+static void jive_power_off(void)
+{
+       printk(KERN_INFO "powering system down...\n");
+
+       s3c2410_gpio_setpin(S3C2410_GPC5, 1);
+       s3c2410_gpio_cfgpin(S3C2410_GPC5, S3C2410_GPIO_OUTPUT);
+}
+
 static void __init jive_machine_init(void)
 {
        /* register system devices for managing low level suspend */
@@ -661,6 +669,8 @@ static void __init jive_machine_init(void)
        s3c_device_i2c.dev.platform_data = &jive_i2c_cfg;
        i2c_register_board_info(0, jive_i2c_devs, ARRAY_SIZE(jive_i2c_devs));
 
+       pm_power_off = jive_power_off;
+
        platform_add_devices(jive_devices, ARRAY_SIZE(jive_devices));
 }