Every usb serial driver should have a pointer to the corresponding usb driver.
So the usb serial core can add a new id not only to the usb serial driver, but
also to the usb driver.
Also the usb drivers of ark3116, mos7720 and mos7840 missed the flag
no_dynamic_id=1. This is added now.
Signed-off-by: Johannes Hölzl <johannes.hoelzl@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
schedule_work(&priv->rx_work);
}
+static struct usb_driver aircable_driver = {
+ .name = "aircable",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = id_table,
+ .no_dynamic_id = 1,
+};
+
static struct usb_serial_driver aircable_device = {
.description = "aircable",
+ .usb_driver = &aircable_driver,
.id_table = id_table,
.num_ports = 1,
.attach = aircable_attach,
.unthrottle = aircable_unthrottle,
};
-static struct usb_driver aircable_driver = {
- .name = "aircable",
- .probe = usb_serial_probe,
- .disconnect = usb_serial_disconnect,
- .id_table = id_table,
-};
-
static int __init aircable_init (void)
{
int retval;
.owner = THIS_MODULE,
.name = "airprime",
},
+ .usb_driver = &airprime_driver,
.id_table = id_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
.id_table = id_table,
+ .no_dynamic_id = 1,
};
static struct usb_serial_driver ark3116_device = {
.name = "ark3116",
},
.id_table = id_table,
+ .usb_driver = &ark3116_driver,
.num_interrupt_in = 1,
.num_bulk_in = 1,
.num_bulk_out = 1,
.name = "belkin",
},
.description = "Belkin / Peracom / GoHubs USB Serial Adapter",
+ .usb_driver = &belkin_driver,
.id_table = id_table_combined,
.num_interrupt_in = 1,
.num_bulk_in = 1,
.owner = THIS_MODULE,
.name = "cp2101",
},
+ .usb_driver = &cp2101_driver,
.id_table = id_table,
.num_interrupt_in = 0,
.num_bulk_in = 0,
.name = "cyberjack",
},
.description = "Reiner SCT Cyberjack USB card reader",
+ .usb_driver = &cyberjack_driver,
.id_table = id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
.open = cyberjack_open,
.close = cyberjack_close,
.write = cyberjack_write,
- .write_room = cyberjack_write_room,
+ .write_room = cyberjack_write_room,
.read_int_callback = cyberjack_read_int_callback,
.read_bulk_callback = cyberjack_read_bulk_callback,
.write_bulk_callback = cyberjack_write_bulk_callback,
.name = "earthmate",
},
.description = "DeLorme Earthmate USB",
+ .usb_driver = &cypress_driver,
.id_table = id_table_earthmate,
.num_interrupt_in = 1,
.num_interrupt_out = 1,
.name = "cyphidcom",
},
.description = "HID->COM RS232 Adapter",
+ .usb_driver = &cypress_driver,
.id_table = id_table_cyphidcomrs232,
.num_interrupt_in = 1,
.num_interrupt_out = 1,
.name = "nokiaca42v2",
},
.description = "Nokia CA-42 V2 Adapter",
+ .usb_driver = &cypress_driver,
.id_table = id_table_nokiaca42v2,
.num_interrupt_in = 1,
.num_interrupt_out = 1,
.name = "digi_2",
},
.description = "Digi 2 port USB adapter",
+ .usb_driver = &digi_driver,
.id_table = id_table_2,
.num_interrupt_in = 0,
.num_bulk_in = 4,
.name = "digi_4",
},
.description = "Digi 4 port USB adapter",
+ .usb_driver = &digi_driver,
.id_table = id_table_4,
.num_interrupt_in = 0,
.num_bulk_in = 5,
.name = "empeg",
},
.id_table = id_table,
+ .usb_driver = &empeg_driver,
.num_interrupt_in = 0,
.num_bulk_in = 1,
.num_bulk_out = 1,
.name = "ftdi_sio",
},
.description = "FTDI USB Serial Device",
+ .usb_driver = &ftdi_driver ,
.id_table = id_table_combined,
.num_interrupt_in = 0,
.num_bulk_in = 1,
.name = "funsoft",
},
.id_table = id_table,
+ .usb_driver = &funsoft_driver,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
.name = "garmin_gps",
},
.description = "Garmin GPS usb/tty",
+ .usb_driver = &garmin_driver,
.id_table = id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
#include <linux/usb/serial.h>
#include <asm/uaccess.h>
+static int generic_probe(struct usb_interface *interface,
+ const struct usb_device_id *id);
+
+
static int debug;
#ifdef CONFIG_USB_SERIAL_GENERIC
static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */
+/* we want to look at all devices, as the vendor/product id can change
+ * depending on the command line argument */
+static struct usb_device_id generic_serial_ids[] = {
+ {.driver_info = 42},
+ {}
+};
+
+static struct usb_driver generic_driver = {
+ .name = "usbserial_generic",
+ .probe = generic_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = generic_serial_ids,
+ .no_dynamic_id = 1,
+};
+
/* All of the device info needed for the Generic Serial Converter */
struct usb_serial_driver usb_serial_generic_device = {
.driver = {
.name = "generic",
},
.id_table = generic_device_ids,
+ .usb_driver = &generic_driver,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
.shutdown = usb_serial_generic_shutdown,
};
-/* we want to look at all devices, as the vendor/product id can change
- * depending on the command line argument */
-static struct usb_device_id generic_serial_ids[] = {
- {.driver_info = 42},
- {}
-};
-
static int generic_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{
return usb_serial_probe(interface, id);
return -ENODEV;
}
-
-static struct usb_driver generic_driver = {
- .name = "usbserial_generic",
- .probe = generic_probe,
- .disconnect = usb_serial_disconnect,
- .id_table = generic_serial_ids,
- .no_dynamic_id = 1,
-};
#endif
int usb_serial_generic_register (int _debug)
.name = "hp4X",
},
.id_table = id_table,
+ .usb_driver = &hp49gp_driver,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
#include "io_tables.h" /* all of the devices that this driver supports */
-static struct usb_driver io_driver = {
- .name = "io_edgeport",
- .probe = usb_serial_probe,
- .disconnect = usb_serial_disconnect,
- .id_table = id_table_combined,
- .no_dynamic_id = 1,
-};
-
/* function prototypes for all of our local functions */
static void process_rcvd_data (struct edgeport_serial *edge_serial, unsigned char *buffer, __u16 bufferLength);
static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2, __u8 byte3);
MODULE_DEVICE_TABLE (usb, id_table_combined);
+static struct usb_driver io_driver = {
+ .name = "io_edgeport",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = id_table_combined,
+ .no_dynamic_id = 1,
+};
+
static struct usb_serial_driver edgeport_2port_device = {
.driver = {
.owner = THIS_MODULE,
.name = "edgeport_2",
},
.description = "Edgeport 2 port adapter",
+ .usb_driver = &io_driver,
.id_table = edgeport_2port_id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
.name = "edgeport_4",
},
.description = "Edgeport 4 port adapter",
+ .usb_driver = &io_driver,
.id_table = edgeport_4port_id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
.name = "edgeport_8",
},
.description = "Edgeport 8 port adapter",
+ .usb_driver = &io_driver,
.id_table = edgeport_8port_id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
.name = "edgeport_ti_1",
},
.description = "Edgeport TI 1 port adapter",
+ .usb_driver = &io_driver,
.id_table = edgeport_1port_id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
.name = "edgeport_ti_2",
},
.description = "Edgeport TI 2 port adapter",
+ .usb_driver = &io_driver,
.id_table = edgeport_2port_id_table,
.num_interrupt_in = 1,
.num_bulk_in = 2,
.name = "ipaq",
},
.description = "PocketPC PDA",
+ .usb_driver = &ipaq_driver,
.id_table = ipaq_id_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 1,
.name = "ipw",
},
.description = "IPWireless converter",
+ .usb_driver = &usb_ipw_driver,
.id_table = usb_ipw_ids,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 1,
.name = "ir-usb",
},
.description = "IR Dongle",
+ .usb_driver = &ir_driver,
.id_table = id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
.name = "keyspan_no_firm",
},
.description = "Keyspan - (without firmware)",
+ .usb_driver = &keyspan_driver,
.id_table = keyspan_pre_ids,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.name = "keyspan_1",
},
.description = "Keyspan 1 port adapter",
+ .usb_driver = &keyspan_driver,
.id_table = keyspan_1port_ids,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.name = "keyspan_2",
},
.description = "Keyspan 2 port adapter",
+ .usb_driver = &keyspan_driver,
.id_table = keyspan_2port_ids,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.name = "keyspan_4",
},
.description = "Keyspan 4 port adapter",
+ .usb_driver = &keyspan_driver,
.id_table = keyspan_4port_ids,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 5,
.name = "keyspan_pda_pre",
},
.description = "Keyspan PDA - (prerenumeration)",
+ .usb_driver = &keyspan_pda_driver,
.id_table = id_table_fake,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.name = "xircom_no_firm",
},
.description = "Xircom / Entregra PGS - (prerenumeration)",
+ .usb_driver = &keyspan_pda_driver,
.id_table = id_table_fake_xircom,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.name = "keyspan_pda",
},
.description = "Keyspan PDA",
+ .usb_driver = &keyspan_pda_driver,
.id_table = id_table_std,
.num_interrupt_in = 1,
.num_bulk_in = 0,
.name = "kl5kusb105d",
},
.description = "KL5KUSB105D / PalmConnect",
+ .usb_driver = &kl5kusb105d_driver,
.id_table = id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
.name = "kobil",
},
.description = "KOBIL USB smart card terminal",
+ .usb_driver = &kobil_driver,
.id_table = id_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 0,
.name = "mct_u232",
},
.description = "MCT U232",
+ .usb_driver = &mct_u232_driver,
.id_table = id_table_combined,
.num_interrupt_in = 2,
.num_bulk_in = 0,
usb_set_serial_data(serial, NULL);
}
+static struct usb_driver usb_driver = {
+ .name = "moschip7720",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = moschip_port_id_table,
+ .no_dynamic_id = 1,
+};
+
static struct usb_serial_driver moschip7720_2port_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "moschip7720",
},
.description = "Moschip 2 port adapter",
+ .usb_driver = &usb_driver,
.id_table = moschip_port_id_table,
.num_interrupt_in = 1,
.num_bulk_in = 2,
.read_bulk_callback = mos7720_bulk_in_callback,
};
-static struct usb_driver usb_driver = {
- .name = "moschip7720",
- .probe = usb_serial_probe,
- .disconnect = usb_serial_disconnect,
- .id_table = moschip_port_id_table,
-};
-
static int __init moschip7720_init(void)
{
int retval;
}
+static struct usb_driver io_driver = {
+ .name = "mos7840",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = moschip_id_table_combined,
+ .no_dynamic_id = 1,
+};
+
static struct usb_serial_driver moschip7840_4port_device = {
.driver = {
.owner = THIS_MODULE,
.name = "mos7840",
},
.description = DRIVER_DESC,
+ .usb_driver = &io_driver,
.id_table = moschip_port_id_table,
.num_interrupt_in = 1, //NUM_DONT_CARE,//1,
#ifdef check
.read_int_callback = mos7840_interrupt_callback,
};
-static struct usb_driver io_driver = {
- .name = "mos7840",
- .probe = usb_serial_probe,
- .disconnect = usb_serial_disconnect,
- .id_table = moschip_id_table_combined,
-};
-
/****************************************************************************
* moschip7840_init
* This is called by the module subsystem, or on startup to initialize us
.name = "navman",
},
.id_table = id_table,
+ .usb_driver = &navman_driver,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
.name = "omninet",
},
.description = "ZyXEL - omni.net lcd plus usb",
+ .usb_driver = &omninet_driver,
.id_table = id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
.name = "option1",
},
.description = "GSM modem (1-port)",
+ .usb_driver = &option_driver,
.id_table = option_ids1,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.name = "pl2303",
},
.id_table = id_table,
+ .usb_driver = &pl2303_driver,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 1,
.num_bulk_out = 1,
.name = "safe_serial",
},
.id_table = id_table,
+ .usb_driver = &safe_driver,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
},
.description = "Sierra USB modem (1 port)",
.id_table = id_table_1port,
+ .usb_driver = &sierra_driver,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 1,
.num_bulk_out = 1,
},
.description = "Sierra USB modem (3 port)",
.id_table = id_table_3port,
+ .usb_driver = &sierra_driver,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 3,
.num_bulk_out = 3,
.name = "ti_usb_3410_5052_1",
},
.description = "TI USB 3410 1 port adapter",
+ .usb_driver = &ti_usb_driver,
.id_table = ti_id_table_3410,
.num_interrupt_in = 1,
.num_bulk_in = 1,
.name = "ti_usb_3410_5052_2",
},
.description = "TI USB 5052 2 port adapter",
+ .usb_driver = &ti_usb_driver,
.id_table = ti_id_table_5052,
.num_interrupt_in = 1,
.num_bulk_in = 2,
.name = "visor",
},
.description = "Handspring Visor / Palm OS",
+ .usb_driver = &visor_driver,
.id_table = id_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 2,
.name = "clie_5",
},
.description = "Sony Clie 5.0",
+ .usb_driver = &visor_driver,
.id_table = clie_id_5_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 2,
.name = "clie_3.5",
},
.description = "Sony Clie 3.5",
+ .usb_driver = &visor_driver,
.id_table = clie_id_3_5_table,
.num_interrupt_in = 0,
.num_bulk_in = 1,
.name = "whiteheatnofirm",
},
.description = "Connect Tech - WhiteHEAT - (prerenumeration)",
+ .usb_driver = &whiteheat_driver,
.id_table = id_table_prerenumeration,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.name = "whiteheat",
},
.description = "Connect Tech - WhiteHEAT",
+ .usb_driver = &whiteheat_driver,
.id_table = id_table_std,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
projects / linux-2.6-omap-h63xx.git / commitdiff