]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/commitdiff
CRIS v10: Cleanup rtc.h
authorJesper Nilsson <jesper.nilsson@axis.com>
Thu, 17 Jan 2008 15:01:45 +0000 (16:01 +0100)
committerJesper Nilsson <jesper.nilsson@axis.com>
Fri, 8 Feb 2008 10:06:29 +0000 (11:06 +0100)
- Change RTC_VLOW_RD -> RTC_VL_READ, RTC_VLOW_SET -> RTC_VL_CLR
- Whitespace and formatting.

include/asm-cris/rtc.h

index cb4bf9217fee6e1155c70966280e32f776f60c68..17d3019529e1665da84616a17907037e83538804 100644 (file)
@@ -1,10 +1,7 @@
-/* $Id: rtc.h,v 1.7 2002/11/04 07:32:09 starvik Exp $ */
 
 #ifndef __RTC_H__
 #define __RTC_H__
 
-
-
 #ifdef CONFIG_ETRAX_DS1302
    /* Dallas DS1302 clock/calendar register numbers. */
 #  define RTC_SECONDS      0
 #  define RTC_CONTROL      7
 
    /* Bits in CONTROL register. */
-#  define RTC_CONTROL_WRITEPROTECT     0x80
-#  define RTC_TRICKLECHARGER           8
-  
+#  define RTC_CONTROL_WRITEPROTECT     0x80
+#  define RTC_TRICKLECHARGER           8
+
   /* Bits in TRICKLECHARGER register TCS TCS TCS TCS DS DS RS RS. */
-#  define RTC_TCR_PATTERN      0xA0    /* 1010xxxx */
-#  define RTC_TCR_1DIOD        0x04    /* xxxx01xx */
-#  define RTC_TCR_2DIOD        0x08    /* xxxx10xx */
-#  define RTC_TCR_DISABLED     0x00    /* xxxxxx00 Disabled */
-#  define RTC_TCR_2KOHM        0x01    /* xxxxxx01 2KOhm */
-#  define RTC_TCR_4KOHM        0x02    /* xxxxxx10 4kOhm */
-#  define RTC_TCR_8KOHM        0x03    /* xxxxxx11 8kOhm */
+#  define RTC_TCR_PATTERN      0xA0    /* 1010xxxx */
+#  define RTC_TCR_1DIOD                0x04    /* xxxx01xx */
+#  define RTC_TCR_2DIOD                0x08    /* xxxx10xx */
+#  define RTC_TCR_DISABLED     0x00    /* xxxxxx00 Disabled */
+#  define RTC_TCR_2KOHM                0x01    /* xxxxxx01 2KOhm */
+#  define RTC_TCR_4KOHM                0x02    /* xxxxxx10 4kOhm */
+#  define RTC_TCR_8KOHM                0x03    /* xxxxxx11 8kOhm */
 
 #elif defined(CONFIG_ETRAX_PCF8563)
    /* I2C bus slave registers. */
@@ -79,7 +76,7 @@ extern int pcf8563_init(void);
 
 /*
  * The struct used to pass data via the following ioctl. Similar to the
- * struct tm in <time.h>, but it needs to be here so that the kernel 
+ * struct tm in <time.h>, but it needs to be here so that the kernel
  * source is self contained, allowing cross-compiles, etc. etc.
  */
 struct rtc_time {
@@ -96,11 +93,15 @@ struct rtc_time {
 
 /* ioctl() calls that are permitted to the /dev/rtc interface. */
 #define RTC_MAGIC 'p'
-#define RTC_RD_TIME            _IOR(RTC_MAGIC, 0x09, struct rtc_time)  /* Read RTC time. */
-#define RTC_SET_TIME           _IOW(RTC_MAGIC, 0x0a, struct rtc_time)  /* Set RTC time. */
-#define RTC_SET_CHARGE         _IOW(RTC_MAGIC, 0x0b, int)              
-#define RTC_VLOW_RD     _IOR(RTC_MAGIC, 0x11, int)  /* Voltage Low detector */
-#define RTC_VLOW_SET    _IO(RTC_MAGIC, 0x12)        /* Clear voltage low information */
-#define RTC_MAX_IOCTL 0x12
+/* Read RTC time. */
+#define RTC_RD_TIME            _IOR(RTC_MAGIC, 0x09, struct rtc_time)
+/* Set RTC time. */
+#define RTC_SET_TIME           _IOW(RTC_MAGIC, 0x0a, struct rtc_time)
+#define RTC_SET_CHARGE         _IOW(RTC_MAGIC, 0x0b, int)
+/* Voltage low detector */
+#define RTC_VL_READ            _IOR(RTC_MAGIC, 0x13, int)
+/* Clear voltage low information */
+#define RTC_VL_CLR             _IO(RTC_MAGIC, 0x14)
+#define RTC_MAX_IOCTL 0x14
 
 #endif /* __RTC_H__ */