These are 8-bit SCSI controllers; the ST-01 is also supported by
          this driver.  It is explained in section 3.9 of the SCSI-HOWTO,
          available from <http://www.tldp.org/docs.html#howto>.  If it
-         doesn't work out of the box, you may have to change some settings in
-         <file:drivers/scsi/seagate.h>.
+         doesn't work out of the box, you may have to change some macros at
+         compiletime, which are described in <file:drivers/scsi/seagate.c>.
 
          To compile this driver as a module, choose M here: the
          module will be called seagate.
 
 #include "scsi.h"
 #include <scsi/scsi_dbg.h>
 #include <scsi/scsi_host.h>
-#include "seagate.h"
 
 #include <scsi/scsi_ioctl.h>
 
 static int hostno = -1;
 static void seagate_reconnect_intr (int, void *, struct pt_regs *);
 static irqreturn_t do_seagate_reconnect_intr (int, void *, struct pt_regs *);
+static int seagate_st0x_bus_reset(struct scsi_cmnd *);
 
 #ifdef FAST
 static int fast = 1;
 static unsigned char linked_target, linked_lun;
 #endif
 
-static void (*done_fn) (Scsi_Cmnd *) = NULL;
-static Scsi_Cmnd *SCint = NULL;
+static void (*done_fn) (struct scsi_cmnd *) = NULL;
+static struct scsi_cmnd *SCint = NULL;
 
 /*
  * These control whether or not disconnect / reconnect will be attempted,
 static void seagate_reconnect_intr (int irq, void *dev_id, struct pt_regs *regs)
 {
        int temp;
-       Scsi_Cmnd *SCtmp;
+       struct scsi_cmnd *SCtmp;
 
        DPRINTK (PHASE_RESELECT, "scsi%d : seagate_reconnect_intr() called\n", hostno);
 
 
 static int recursion_depth = 0;
 
-static int seagate_st0x_queue_command (Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
+static int seagate_st0x_queue_command(struct scsi_cmnd * SCpnt,
+                                     void (*done) (struct scsi_cmnd *))
 {
        int result, reconnect;
-       Scsi_Cmnd *SCtmp;
+       struct scsi_cmnd *SCtmp;
 
        DANY ("seagate: que_command");
        done_fn = done;
        return retcode (st0x_aborted);
 }                              /* end of internal_command */
 
-static int seagate_st0x_abort (Scsi_Cmnd * SCpnt)
+static int seagate_st0x_abort(struct scsi_cmnd * SCpnt)
 {
        st0x_aborted = DID_ABORT;
        return SUCCESS;
  * May be called with SCpnt = NULL
  */
 
-static int seagate_st0x_bus_reset(Scsi_Cmnd * SCpnt)
+static int seagate_st0x_bus_reset(struct scsi_cmnd * SCpnt)
 {
        /* No timeouts - this command is going to fail because it was reset. */
        DANY ("scsi%d: Reseting bus... ", hostno);
 
+++ /dev/null
-/*
- *     seagate.h Copyright (C) 1992 Drew Eckhardt 
- *     low level scsi driver header for ST01/ST02 by
- *             Drew Eckhardt 
- *
- *     <drew@colorado.edu>
- */
-
-#ifndef _SEAGATE_H
-#define SEAGATE_H
-
-static int seagate_st0x_detect(struct scsi_host_template *);
-static int seagate_st0x_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
-
-static int seagate_st0x_abort(Scsi_Cmnd *);
-static const char *seagate_st0x_info(struct Scsi_Host *);
-static int seagate_st0x_bus_reset(Scsi_Cmnd *);
-
-#endif /* _SEAGATE_H */