# Network device configuration
#
-menu "Network device support"
- depends on NET
-
-config NETDEVICES
+menuconfig NETDEVICES
default y if UML
bool "Network device support"
---help---
# Ethernet
#
-menu "Ethernet (10 or 100Mbit)"
- depends on !UML
-
-config NET_ETHERNET
+menuconfig NET_ETHERNET
bool "Ethernet (10 or 100Mbit)"
+ depends on !UML
---help---
Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
type of Local Area Network (LAN) in universities and companies.
kernel: saying N will just cause the configurator to skip all
the questions about Ethernet network cards. If unsure, say N.
+if NET_ETHERNET
+
config MII
tristate "Generic Media Independent Interface device support"
- depends on NET_ETHERNET
help
Most ethernet controllers have MII transceiver either as an external
or internal device. It is safe to say Y or M here even if your
config MACB
tristate "Atmel MACB support"
- depends on NET_ETHERNET && (AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263)
+ depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263
select MII
help
The Atmel MACB ethernet interface is found on many AT32 and AT91
config MACE
tristate "MACE (Power Mac ethernet) support"
- depends on NET_ETHERNET && PPC_PMAC && PPC32
+ depends on PPC_PMAC && PPC32
select CRC32
help
Power Macintoshes and clones with Ethernet built-in on the
config BMAC
tristate "BMAC (G3 ethernet) support"
- depends on NET_ETHERNET && PPC_PMAC && PPC32
+ depends on PPC_PMAC && PPC32
select CRC32
help
Say Y for support of BMAC Ethernet interfaces. These are used on G3
config ARIADNE
tristate "Ariadne support"
- depends on NET_ETHERNET && ZORRO
+ depends on ZORRO
help
If you have a Village Tronic Ariadne Ethernet adapter, say Y.
Otherwise, say N.
config A2065
tristate "A2065 support"
- depends on NET_ETHERNET && ZORRO
+ depends on ZORRO
select CRC32
help
If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
config HYDRA
tristate "Hydra support"
- depends on NET_ETHERNET && ZORRO
+ depends on ZORRO
select CRC32
help
If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
config ZORRO8390
tristate "Zorro NS8390-based Ethernet support"
- depends on NET_ETHERNET && ZORRO
+ depends on ZORRO
select CRC32
help
This driver is for Zorro Ethernet cards using an NS8390-compatible
config APNE
tristate "PCMCIA NE2000 support"
- depends on NET_ETHERNET && AMIGA_PCMCIA
+ depends on AMIGA_PCMCIA
select CRC32
help
If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
config APOLLO_ELPLUS
tristate "Apollo 3c505 support"
- depends on NET_ETHERNET && APOLLO
+ depends on APOLLO
help
Say Y or M here if your Apollo has a 3Com 3c505 ISA Ethernet card.
If you don't have one made for Apollos, you can use one from a PC,
config MAC8390
bool "Macintosh NS 8390 based ethernet cards"
- depends on NET_ETHERNET && MAC
+ depends on MAC
select CRC32
help
If you want to include a driver to support Nubus or LC-PDS
config MAC89x0
tristate "Macintosh CS89x0 based ethernet cards"
- depends on NET_ETHERNET && MAC
+ depends on MAC
---help---
Support for CS89x0 chipset based Ethernet cards. If you have a
Nubus or LC-PDS network (Ethernet) card of this type, say Y and
config MACSONIC
tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)"
- depends on NET_ETHERNET && MAC
+ depends on MAC
---help---
Support for NatSemi SONIC based Ethernet devices. This includes
the onboard Ethernet in many Quadras as well as some LC-PDS,
config MACMACE
bool "Macintosh (AV) onboard MACE ethernet"
- depends on NET_ETHERNET && MAC
+ depends on MAC
select CRC32
help
Support for the onboard AMD 79C940 MACE Ethernet controller used in
config MVME147_NET
tristate "MVME147 (Lance) Ethernet support"
- depends on NET_ETHERNET && MVME147
+ depends on MVME147
select CRC32
help
Support for the on-board Ethernet interface on the Motorola MVME147
config MVME16x_NET
tristate "MVME16x Ethernet support"
- depends on NET_ETHERNET && MVME16x
+ depends on MVME16x
help
This is the driver for the Ethernet interface on the Motorola
MVME162, 166, 167, 172 and 177 boards. Say Y here to include the
config BVME6000_NET
tristate "BVME6000 Ethernet support"
- depends on NET_ETHERNET && BVME6000
+ depends on BVME6000
help
This is the driver for the Ethernet interface on BVME4000 and
BVME6000 VME boards. Say Y here to include the driver for this chip
config ATARILANCE
tristate "Atari Lance support"
- depends on NET_ETHERNET && ATARI
+ depends on ATARI
help
Say Y to include support for several Atari Ethernet adapters based
on the AMD Lance chipset: RieblCard (with or without battery), or
config ATARI_BIONET
tristate "BioNet-100 support"
- depends on NET_ETHERNET && ATARI && ATARI_ACSI && BROKEN
+ depends on ATARI && ATARI_ACSI && BROKEN
help
Say Y to include support for BioData's BioNet-100 Ethernet adapter
for the ACSI port. The driver works (has to work...) with a polled
config ATARI_PAMSNET
tristate "PAMsNet support"
- depends on NET_ETHERNET && ATARI && ATARI_ACSI && BROKEN
+ depends on ATARI && ATARI_ACSI && BROKEN
help
Say Y to include support for the PAMsNet Ethernet adapter for the
ACSI port ("ACSI node"). The driver works (has to work...) with a
config SUN3LANCE
tristate "Sun3/Sun3x on-board LANCE support"
- depends on NET_ETHERNET && (SUN3 || SUN3X)
+ depends on SUN3 || SUN3X
help
Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
featured an AMD Lance 10Mbit Ethernet controller on board; say Y
config SUN3_82586
bool "Sun3 on-board Intel 82586 support"
- depends on NET_ETHERNET && SUN3
+ depends on SUN3
help
This driver enables support for the on-board Intel 82586 based
Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards. Note
config HPLANCE
bool "HP on-board LANCE support"
- depends on NET_ETHERNET && DIO
+ depends on DIO
select CRC32
help
If you want to use the builtin "LANCE" Ethernet controller on an
config LASI_82596
tristate "Lasi ethernet"
- depends on NET_ETHERNET && GSC
+ depends on GSC
help
Say Y here to support the builtin Intel 82596 ethernet controller
found in Hewlett-Packard PA-RISC machines with 10Mbit ethernet.
config MIPS_JAZZ_SONIC
tristate "MIPS JAZZ onboard SONIC Ethernet support"
- depends on NET_ETHERNET && MACH_JAZZ
+ depends on MACH_JAZZ
help
This is the driver for the onboard card of MIPS Magnum 4000,
Acer PICA, Olivetti M700-10 and a few other identical OEM systems.
config MIPS_AU1X00_ENET
bool "MIPS AU1000 Ethernet support"
- depends on NET_ETHERNET && SOC_AU1X00
+ depends on SOC_AU1X00
select PHYLIB
select CRC32
help
config NET_SB1250_MAC
tristate "SB1250 Ethernet support"
- depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC
+ depends on SIBYTE_SB1xxx_SOC
config SGI_IOC3_ETH
bool "SGI IOC3 Ethernet"
- depends on NET_ETHERNET && PCI && SGI_IP27
+ depends on PCI && SGI_IP27
select CRC32
select MII
help
config MIPS_SIM_NET
tristate "MIPS simulator Network device"
- depends on NET_ETHERNET && MIPS_SIM
+ depends on MIPS_SIM
help
The MIPSNET device is a simple Ethernet network device which is
emulated by the MIPS Simulator.
config SGI_O2MACE_ETH
tristate "SGI O2 MACE Fast Ethernet support"
- depends on NET_ETHERNET && SGI_IP32=y
+ depends on SGI_IP32=y
config STNIC
tristate "National DP83902AV support"
- depends on NET_ETHERNET && SUPERH
+ depends on SUPERH
select CRC32
help
Support for cards based on the National Semiconductor DP83902AV
config SUNLANCE
tristate "Sun LANCE support"
- depends on NET_ETHERNET && SBUS
+ depends on SBUS
select CRC32
help
This driver supports the "le" interface present on all 32-bit Sparc
config HAPPYMEAL
tristate "Sun Happy Meal 10/100baseT support"
- depends on NET_ETHERNET && (SBUS || PCI)
+ depends on SBUS || PCI
select CRC32
help
This driver supports the "hme" interface present on most Ultra
config SUNBMAC
tristate "Sun BigMAC 10/100baseT support (EXPERIMENTAL)"
- depends on NET_ETHERNET && SBUS && EXPERIMENTAL
+ depends on SBUS && EXPERIMENTAL
select CRC32
help
This driver supports the "be" interface available as an Sbus option.
config SUNQE
tristate "Sun QuadEthernet support"
- depends on NET_ETHERNET && SBUS
+ depends on SBUS
select CRC32
help
This driver supports the "qe" 10baseT Ethernet device, available as
config SUNGEM
tristate "Sun GEM support"
- depends on NET_ETHERNET && PCI
+ depends on PCI
select CRC32
help
Support for the Sun GEM chip, aka Sun GigabitEthernet/P 2.0. See also
config CASSINI
tristate "Sun Cassini support"
- depends on NET_ETHERNET && PCI
+ depends on PCI
select CRC32
help
Support for the Sun Cassini chip, aka Sun GigaSwift Ethernet. See also
config NET_VENDOR_3COM
bool "3COM cards"
- depends on NET_ETHERNET && (ISA || EISA || MCA || PCI)
+ depends on ISA || EISA || MCA || PCI
help
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
config LANCE
tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
- depends on NET_ETHERNET && ISA && ISA_DMA_API
+ depends on ISA && ISA_DMA_API
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
config NET_VENDOR_SMC
bool "Western Digital/SMC cards"
- depends on NET_ETHERNET && (ISA || MCA || EISA || MAC)
+ depends on ISA || MCA || EISA || MAC
help
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
<file:Documentation/networking/net-modules.txt>. The module
will be called smc-ultra32.
+config SMC9194
+ tristate "SMC 9194 support"
+ depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN)
+ select CRC32
+ ---help---
+ This is support for the SMC9xxx based Ethernet cards. Choose this
+ option if you have a DELL laptop with the docking station, or
+ another SMC9192/9194 based chipset. Say Y if you want it compiled
+ into the kernel, and read the file
+ <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called smc9194.
+
config SMC91X
tristate "SMC 91C9x/91C1xxx support"
select CRC32
select MII
- depends on NET_ETHERNET && (ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || SOC_AU1X00 || BFIN)
+ depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || SOC_AU1X00 || BFIN
help
This is a driver for SMC's 91x series of Ethernet chipsets,
including the SMC91C94 and the SMC91C111. Say Y if you want it
module, say M here and read <file:Documentation/kbuild/modules.txt>
as well as <file:Documentation/networking/net-modules.txt>.
-config SMC9194
- tristate "SMC 9194 support"
- depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN)
- select CRC32
- ---help---
- This is support for the SMC9xxx based Ethernet cards. Choose this
- option if you have a DELL laptop with the docking station, or
- another SMC9192/9194 based chipset. Say Y if you want it compiled
- into the kernel, and read the file
- <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
- will be called smc9194.
-
config NET_NETX
tristate "NetX Ethernet support"
select MII
- depends on NET_ETHERNET && ARCH_NETX
+ depends on ARCH_NETX
help
This is support for the Hilscher netX builtin Ethernet ports
config DM9000
tristate "DM9000 support"
- depends on (ARM || MIPS) && NET_ETHERNET
+ depends on ARM || MIPS
select CRC32
select MII
---help---
tristate "SMSC LAN911[5678] support"
select CRC32
select MII
- depends on NET_ETHERNET && ARCH_PXA
+ depends on ARCH_PXA
help
This is a driver for SMSC's LAN911x series of Ethernet chipsets
including the new LAN9115, LAN9116, LAN9117, and LAN9118.
config NET_VENDOR_RACAL
bool "Racal-Interlan (Micom) NI cards"
- depends on NET_ETHERNET && ISA
+ depends on ISA
help
If you have a network (Ethernet) card belonging to this class, such
as the NI5010, NI5210 or NI6210, say Y and read the Ethernet-HOWTO,
config AT1700
tristate "AT1700/1720 support (EXPERIMENTAL)"
- depends on NET_ETHERNET && (ISA || MCA_LEGACY) && EXPERIMENTAL
+ depends on (ISA || MCA_LEGACY) && EXPERIMENTAL
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
config DEPCA
tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support"
- depends on NET_ETHERNET && (ISA || EISA || MCA)
+ depends on ISA || EISA || MCA
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
config HP100
tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support"
- depends on NET_ETHERNET && (ISA || EISA || PCI)
+ depends on ISA || EISA || PCI
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
config NET_ISA
bool "Other ISA cards"
- depends on NET_ETHERNET && ISA
+ depends on ISA
---help---
If your network (Ethernet) card hasn't been mentioned yet and its
bus system (that's the way the cards talks to the other components
config NE2_MCA
tristate "NE/2 (ne2000 MCA version) support"
- depends on NET_ETHERNET && MCA_LEGACY
+ depends on MCA_LEGACY
select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
config IBMLANA
tristate "IBM LAN Adapter/A support"
- depends on NET_ETHERNET && MCA && MCA_LEGACY
+ depends on MCA && MCA_LEGACY
---help---
This is a Micro Channel Ethernet adapter. You need to set
CONFIG_MCA to use this driver. It is both available as an in-kernel
config IBMVETH
tristate "IBM LAN Virtual Ethernet support"
- depends on NET_ETHERNET && PPC_PSERIES
+ depends on PPC_PSERIES
---help---
This driver supports virtual ethernet adapters on newer IBM iSeries
and pSeries systems.
config NET_PCI
bool "EISA, VLB, PCI and on board controllers"
- depends on NET_ETHERNET && (ISA || EISA || PCI)
+ depends on ISA || EISA || PCI
help
This is another class of network cards which attach directly to the
bus. If you have one of those, say Y and read the Ethernet-HOWTO,
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called amd8111e.
+
config AMD8111E_NAPI
bool "Enable NAPI support"
depends on AMD8111_ETH
config NET_POCKET
bool "Pocket and portable adapters"
- depends on NET_ETHERNET && PARPORT
+ depends on PARPORT
---help---
Cute little network (Ethernet) devices which attach to the parallel
port ("pocket adapters"), commonly used with laptops. If you have
config SGISEEQ
tristate "SGI Seeq ethernet controller support"
- depends on NET_ETHERNET && SGI_IP22
+ depends on SGI_IP22
help
Say Y here if you have an Seeq based Ethernet network card. This is
used in many Silicon Graphics machines.
config DECLANCE
tristate "DEC LANCE ethernet controller support"
- depends on NET_ETHERNET && MACH_DECSTATION
+ depends on MACH_DECSTATION
select CRC32
help
This driver is for the series of Ethernet controllers produced by
config NE_H8300
tristate "NE2000 compatible support for H8/300"
- depends on H8300 && NET_ETHERNET
+ depends on H8300
help
Say Y here if you want to use the NE2000 compatible
controller on the Renesas H8/300 processor.
source "drivers/net/fec_8xx/Kconfig"
source "drivers/net/fs_enet/Kconfig"
-endmenu
+endif # NET_ETHERNET
#
# Gigabit Ethernet
If you want to log kernel messages over the network, enable this.
See <file:Documentation/networking/netconsole.txt> for details.
-endif #NETDEVICES
-
config NETPOLL
def_bool NETCONSOLE
config NET_POLL_CONTROLLER
def_bool NETPOLL
-endmenu
+endif # NETDEVICES
projects / linux-2.6-omap-h63xx.git / commitdiff