* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
hrtimer: prevent migration of per CPU hrtimers
hrtimer: mark migration state
hrtimer: fix migration of CB_IRQSAFE_NO_SOFTIRQ hrtimers
hrtimer: migrate pending list on cpu offline
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
usage:
- ioctl(fd, CDROMEJECT, 0);
+ ioctl(fd, CDROMCLOSETRAY, 0);
inputs: none
outputs: none
error returns:
- ENOSYS cd drive not capable of ejecting
+ ENOSYS cd drive not capable of closing the tray
EBUSY other processes are accessing drive, or door is locked
notes:
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 27
-EXTRAVERSION = -rc7
+EXTRAVERSION = -rc8
NAME = Rotary Wombat
# *DOCUMENTATION*
+++ /dev/null
-/*
- * include/asm/cnt32_to_63.h -- extend a 32-bit counter to 63 bits
- *
- * Author: Nicolas Pitre
- * Created: December 3, 2006
- * Copyright: MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- */
-
-#ifndef __INCLUDE_CNT32_TO_63_H__
-#define __INCLUDE_CNT32_TO_63_H__
-
-#include <linux/compiler.h>
-#include <asm/types.h>
-#include <asm/byteorder.h>
-
-/*
- * Prototype: u64 cnt32_to_63(u32 cnt)
- * Many hardware clock counters are only 32 bits wide and therefore have
- * a relatively short period making wrap-arounds rather frequent. This
- * is a problem when implementing sched_clock() for example, where a 64-bit
- * non-wrapping monotonic value is expected to be returned.
- *
- * To overcome that limitation, let's extend a 32-bit counter to 63 bits
- * in a completely lock free fashion. Bits 0 to 31 of the clock are provided
- * by the hardware while bits 32 to 62 are stored in memory. The top bit in
- * memory is used to synchronize with the hardware clock half-period. When
- * the top bit of both counters (hardware and in memory) differ then the
- * memory is updated with a new value, incrementing it when the hardware
- * counter wraps around.
- *
- * Because a word store in memory is atomic then the incremented value will
- * always be in synch with the top bit indicating to any potential concurrent
- * reader if the value in memory is up to date or not with regards to the
- * needed increment. And any race in updating the value in memory is harmless
- * as the same value would simply be stored more than once.
- *
- * The only restriction for the algorithm to work properly is that this
- * code must be executed at least once per each half period of the 32-bit
- * counter to properly update the state bit in memory. This is usually not a
- * problem in practice, but if it is then a kernel timer could be scheduled
- * to manage for this code to be executed often enough.
- *
- * Note that the top bit (bit 63) in the returned value should be considered
- * as garbage. It is not cleared here because callers are likely to use a
- * multiplier on the returned value which can get rid of the top bit
- * implicitly by making the multiplier even, therefore saving on a runtime
- * clear-bit instruction. Otherwise caller must remember to clear the top
- * bit explicitly.
- */
-
-/* this is used only to give gcc a clue about good code generation */
-typedef union {
- struct {
-#if defined(__LITTLE_ENDIAN)
- u32 lo, hi;
-#elif defined(__BIG_ENDIAN)
- u32 hi, lo;
-#endif
- };
- u64 val;
-} cnt32_to_63_t;
-
-#define cnt32_to_63(cnt_lo) \
-({ \
- static volatile u32 __m_cnt_hi = 0; \
- cnt32_to_63_t __x; \
- __x.hi = __m_cnt_hi; \
- __x.lo = (cnt_lo); \
- if (unlikely((s32)(__x.hi ^ __x.lo) < 0)) \
- __m_cnt_hi = __x.hi = (__x.hi ^ 0x80000000) + (__x.hi >> 31); \
- __x.val; \
-})
-
-#endif
case 'D':
case 'k':
case 'c':
- kgdb_contthread = NULL;
-
/*
* Try to read optional parameter, pc unchanged if no parm.
* If this was a compiled breakpoint, we need to move
default "01000000" if PLAT_M32104UT
default "00800000" if PLAT_OAKS32R
-config NOHIGHMEM
- bool
- default y
-
config ARCH_DISCONTIGMEM_ENABLE
bool "Internal RAM Support"
depends on CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP || CHIP_M32104
source "drivers/pci/Kconfig"
config ISA
- bool "ISA support"
- help
- Find out whether you have ISA slots on your motherboard. ISA is the
- name of a bus system, i.e. the way the CPU talks to the other stuff
- inside your box. If you have ISA, say Y, otherwise N.
+ bool
source "drivers/pcmcia/Kconfig"
and3 r4, r4, #0x8000 ; check BSM bit
#endif
beqz r4, resume_kernel
-ENTRY(resume_userspace)
+resume_userspace:
DISABLE_INTERRUPTS(r4) ; make sure we don't miss an interrupt
; setting need_resched or sigpending
; between sampling and the iret
.global _end
ENTRY(stext)
ENTRY(_stext)
-ENTRY(startup_32)
/* Setup up the stack pointer */
LDIMM (r0, spi_stack_top)
LDIMM (r1, spu_stack_top)
#include <linux/module.h>
#include <asm/uaccess.h>
-atomic_t irq_err_count;
-atomic_t irq_mis_count;
-
/*
* Generic, controller-independent functions:
*/
seq_putc(p, '\n');
skip:
spin_unlock_irqrestore(&irq_desc[i].lock, flags);
- } else if (i == NR_IRQS) {
- seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count));
- seq_printf(p, "MIS: %10u\n", atomic_read(&irq_mis_count));
}
return 0;
}
#include <asm/delay.h>
#include <asm/irq.h>
#include <asm/tlbflush.h>
+#include <asm/pgtable.h>
/* platform dependent support */
EXPORT_SYMBOL(boot_cpu_data);
EXPORT_SYMBOL(copy_page);
EXPORT_SYMBOL(clear_page);
EXPORT_SYMBOL(strlen);
+EXPORT_SYMBOL(empty_zero_page);
EXPORT_SYMBOL(_inb);
EXPORT_SYMBOL(_inw);
#include <linux/err.h>
-static int hlt_counter=0;
-
/*
* Return saved PC of a blocked thread.
*/
/*
* Powermanagement idle function, if any..
*/
-void (*pm_idle)(void) = NULL;
-EXPORT_SYMBOL(pm_idle);
+static void (*pm_idle)(void) = NULL;
void (*pm_power_off)(void) = NULL;
EXPORT_SYMBOL(pm_power_off);
-void disable_hlt(void)
-{
- hlt_counter++;
-}
-
-EXPORT_SYMBOL(disable_hlt);
-
-void enable_hlt(void)
-{
- hlt_counter--;
-}
-
-EXPORT_SYMBOL(enable_hlt);
-
/*
* We use this is we don't have any better
* idle routine..
*/
-void default_idle(void)
+static void default_idle(void)
{
/* M32R_FIXME: Please use "cpu_sleep" mode. */
cpu_relax();
return 0;
}
-/*
- * Capture the user space registers if the task is not running (in user space)
- */
-int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs)
-{
- /* M32R_FIXME */
- return 1;
-}
-
asmlinkage int sys_fork(unsigned long r0, unsigned long r1, unsigned long r2,
unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6,
struct pt_regs regs)
void smp_ipi_timer_interrupt(struct pt_regs *);
void smp_local_timer_interrupt(void);
-void send_IPI_allbutself(int, int);
+static void send_IPI_allbutself(int, int);
static void send_IPI_mask(cpumask_t, int, int);
unsigned long send_IPI_mask_phys(cpumask_t, int, int);
* ---------- --- --------------------------------------------------------
*
*==========================================================================*/
-void send_IPI_allbutself(int ipi_num, int try)
+static void send_IPI_allbutself(int ipi_num, int try)
{
cpumask_t cpumask;
#include <asm/hw_irq.h>
#ifdef CONFIG_SMP
-extern void send_IPI_allbutself(int, int);
extern void smp_local_timer_interrupt(void);
#endif
* timer_interrupt() needs to keep up the real-time clock,
* as well as call the "do_timer()" routine every clocktick
*/
-irqreturn_t timer_interrupt(int irq, void *dev_id)
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
{
#ifndef CONFIG_SMP
profile_tick(CPU_PROFILING);
return IRQ_HANDLED;
}
-struct irqaction irq0 = {
+static struct irqaction irq0 = {
.handler = timer_interrupt,
.flags = IRQF_DISABLED,
.mask = CPU_MASK_NONE,
((unsigned long)func - (unsigned long)eit_vector - entry*4)/4 \
+ 0xff000000UL
-void set_eit_vector_entries(void)
+static void set_eit_vector_entries(void)
{
extern void default_eit_handler(void);
extern void system_call(void);
cpu_init();
}
-int kstack_depth_to_print = 24;
+static int kstack_depth_to_print = 24;
-void show_trace(struct task_struct *task, unsigned long *stack)
+static void show_trace(struct task_struct *task, unsigned long *stack)
{
unsigned long addr;
printk("\n");
}
-DEFINE_SPINLOCK(die_lock);
+static DEFINE_SPINLOCK(die_lock);
void die(const char * str, struct pt_regs * regs, long err)
{
*/
#include <linux/param.h>
+#include <linux/module.h>
#ifdef CONFIG_SMP
#include <linux/sched.h>
#include <asm/current.h>
{
__const_udelay(nsecs * 0x00005); /* 2**32 / 1000000000 (rounded up) */
}
+EXPORT_SYMBOL(__ndelay);
{
gpio -= AU1XXX_GPIO_BASE;
- gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | (value << gpio);
+ gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio);
}
static int au1xxx_gpio2_direction_input(unsigned gpio)
{
gpio -= AU1XXX_GPIO_BASE;
gpio2->dir |= 0x01 << gpio;
- gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | (value << gpio);
+ gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio);
return 0;
}
atomic_set(&kgdb_cpu_doing_single_step, -1);
if (remcom_in_buffer[0] == 's')
- if (kgdb_contthread)
- atomic_set(&kgdb_cpu_doing_single_step, cpu);
+ atomic_set(&kgdb_cpu_doing_single_step, cpu);
return 0;
}
obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o
obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o
+obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o
#
# These are still pretty much in the old state, watch, go blind.
--- /dev/null
+/*
+ * Copyright (C) 2008 Aurelien Jarno <aurelien@aurel32.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/ssb/ssb.h>
+
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ return 0;
+}
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ int res;
+ u8 slot, pin;
+
+ res = ssb_pcibios_plat_dev_init(dev);
+ if (res < 0) {
+ printk(KERN_ALERT "PCI: Failed to init device %s\n",
+ pci_name(dev));
+ return res;
+ }
+
+ pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+ slot = PCI_SLOT(dev->devfn);
+ res = ssb_pcibios_map_irq(dev, slot, pin);
+
+ /* IRQ-0 and IRQ-1 are software interrupts. */
+ if (res < 2) {
+ printk(KERN_ALERT "PCI: Failed to map IRQ of device %s\n",
+ pci_name(dev));
+ return res;
+ }
+
+ dev->irq = res;
+ return 0;
+}
+
* on any one of the hubs connected to its xbow.
*/
int __devinit pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ return 0;
+}
+
+/* Most MIPS systems have straight-forward swizzling needs. */
+static inline u8 bridge_swizzle(u8 pin, u8 slot)
+{
+ return (((pin - 1) + slot) % 4) + 1;
+}
+
+static inline struct pci_dev *bridge_root_dev(struct pci_dev *dev)
+{
+ while (dev->bus->parent) {
+ /* Move up the chain of bridges. */
+ dev = dev->bus->self;
+ }
+
+ return dev;
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
{
struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
- int irq = bc->pci_int[slot];
+ struct pci_dev *rdev = bridge_root_dev(dev);
+ int slot = PCI_SLOT(rdev->devfn);
+ int irq;
+ irq = bc->pci_int[slot];
if (irq == -1) {
- irq = bc->pci_int[slot] = request_bridge_irq(bc);
+ irq = request_bridge_irq(bc);
if (irq < 0)
- panic("Can't allocate interrupt for PCI device %s\n",
- pci_name(dev));
+ return irq;
+
+ bc->pci_int[slot] = irq;
}
irq_to_bridge[irq] = bc;
irq_to_slot[irq] = slot;
- return irq;
-}
+ dev->irq = irq;
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
return 0;
}
linux_regs->msr |= MSR_SE;
#endif
kgdb_single_step = 1;
- if (kgdb_contthread)
- atomic_set(&kgdb_cpu_doing_single_step,
- raw_smp_processor_id());
+ atomic_set(&kgdb_cpu_doing_single_step,
+ raw_smp_processor_id());
}
return 0;
}
#include <asm/uaccess.h>
#include <asm/desc.h>
#include <asm/i8253.h>
+#include <asm/olpc.h>
#include <asm/paravirt.h>
#include <asm/reboot.h>
dmi_check_system(apm_dmi_table);
- if (apm_info.bios.version == 0 || paravirt_enabled()) {
+ if (apm_info.bios.version == 0 || paravirt_enabled() || machine_is_olpc()) {
printk(KERN_INFO "apm: BIOS not found.\n");
return -ENODEV;
}
*/
void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
{
+#ifndef CONFIG_X86_32
+ u32 *gdb_regs32 = (u32 *)gdb_regs;
+#endif
gdb_regs[GDB_AX] = regs->ax;
gdb_regs[GDB_BX] = regs->bx;
gdb_regs[GDB_CX] = regs->cx;
gdb_regs[GDB_SI] = regs->si;
gdb_regs[GDB_DI] = regs->di;
gdb_regs[GDB_BP] = regs->bp;
- gdb_regs[GDB_PS] = regs->flags;
gdb_regs[GDB_PC] = regs->ip;
#ifdef CONFIG_X86_32
+ gdb_regs[GDB_PS] = regs->flags;
gdb_regs[GDB_DS] = regs->ds;
gdb_regs[GDB_ES] = regs->es;
gdb_regs[GDB_CS] = regs->cs;
gdb_regs[GDB_R13] = regs->r13;
gdb_regs[GDB_R14] = regs->r14;
gdb_regs[GDB_R15] = regs->r15;
+ gdb_regs32[GDB_PS] = regs->flags;
+ gdb_regs32[GDB_CS] = regs->cs;
+ gdb_regs32[GDB_SS] = regs->ss;
#endif
gdb_regs[GDB_SP] = regs->sp;
}
*/
void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
{
+#ifndef CONFIG_X86_32
+ u32 *gdb_regs32 = (u32 *)gdb_regs;
+#endif
gdb_regs[GDB_AX] = 0;
gdb_regs[GDB_BX] = 0;
gdb_regs[GDB_CX] = 0;
gdb_regs[GDB_FS] = 0xFFFF;
gdb_regs[GDB_GS] = 0xFFFF;
#else
- gdb_regs[GDB_PS] = *(unsigned long *)(p->thread.sp + 8);
- gdb_regs[GDB_PC] = 0;
+ gdb_regs32[GDB_PS] = *(unsigned long *)(p->thread.sp + 8);
+ gdb_regs32[GDB_CS] = __KERNEL_CS;
+ gdb_regs32[GDB_SS] = __KERNEL_DS;
+ gdb_regs[GDB_PC] = p->thread.ip;
gdb_regs[GDB_R8] = 0;
gdb_regs[GDB_R9] = 0;
gdb_regs[GDB_R10] = 0;
*/
void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
{
+#ifndef CONFIG_X86_32
+ u32 *gdb_regs32 = (u32 *)gdb_regs;
+#endif
regs->ax = gdb_regs[GDB_AX];
regs->bx = gdb_regs[GDB_BX];
regs->cx = gdb_regs[GDB_CX];
regs->si = gdb_regs[GDB_SI];
regs->di = gdb_regs[GDB_DI];
regs->bp = gdb_regs[GDB_BP];
- regs->flags = gdb_regs[GDB_PS];
regs->ip = gdb_regs[GDB_PC];
#ifdef CONFIG_X86_32
+ regs->flags = gdb_regs[GDB_PS];
regs->ds = gdb_regs[GDB_DS];
regs->es = gdb_regs[GDB_ES];
regs->cs = gdb_regs[GDB_CS];
regs->r13 = gdb_regs[GDB_R13];
regs->r14 = gdb_regs[GDB_R14];
regs->r15 = gdb_regs[GDB_R15];
+ regs->flags = gdb_regs32[GDB_PS];
+ regs->cs = gdb_regs32[GDB_CS];
+ regs->ss = gdb_regs32[GDB_SS];
#endif
}
if (remcomInBuffer[0] == 's') {
linux_regs->flags |= X86_EFLAGS_TF;
kgdb_single_step = 1;
- if (kgdb_contthread) {
- atomic_set(&kgdb_cpu_doing_single_step,
- raw_smp_processor_id());
- }
+ atomic_set(&kgdb_cpu_doing_single_step,
+ raw_smp_processor_id());
}
get_debugreg(dr6, 6);
case DIE_DEBUG:
if (atomic_read(&kgdb_cpu_doing_single_step) ==
- raw_smp_processor_id() &&
- user_mode(regs))
- return single_step_cont(regs, args);
+ raw_smp_processor_id()) {
+ if (user_mode(regs))
+ return single_step_cont(regs, args);
+ break;
+ } else if (test_thread_flag(TIF_SINGLESTEP))
+ /* This means a user thread is single stepping
+ * a system call which should be ignored
+ */
+ return NOTIFY_DONE;
/* fall through */
default:
if (user_mode(regs))
static void nv_nf2_thaw(struct ata_port *ap);
static void nv_ck804_freeze(struct ata_port *ap);
static void nv_ck804_thaw(struct ata_port *ap);
+static int nv_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
static int nv_adma_slave_config(struct scsi_device *sdev);
static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc);
static void nv_adma_qc_prep(struct ata_queued_cmd *qc);
.slave_configure = nv_swncq_slave_config,
};
-static struct ata_port_operations nv_generic_ops = {
+/* OSDL bz3352 reports that some nv controllers can't determine device
+ * signature reliably and nv_hardreset is implemented to work around
+ * the problem. This was reported on nf3 and it's unclear whether any
+ * other controllers are affected. However, the workaround has been
+ * applied to all variants and there isn't much to gain by trying to
+ * find out exactly which ones are affected at this point especially
+ * because NV has moved over to ahci for newer controllers.
+ */
+static struct ata_port_operations nv_common_ops = {
.inherits = &ata_bmdma_port_ops,
- .hardreset = ATA_OP_NULL,
+ .hardreset = nv_hardreset,
.scr_read = nv_scr_read,
.scr_write = nv_scr_write,
};
+/* OSDL bz11195 reports that link doesn't come online after hardreset
+ * on generic nv's and there have been several other similar reports
+ * on linux-ide. Disable hardreset for generic nv's.
+ */
+static struct ata_port_operations nv_generic_ops = {
+ .inherits = &nv_common_ops,
+ .hardreset = ATA_OP_NULL,
+};
+
static struct ata_port_operations nv_nf2_ops = {
- .inherits = &nv_generic_ops,
+ .inherits = &nv_common_ops,
.freeze = nv_nf2_freeze,
.thaw = nv_nf2_thaw,
};
static struct ata_port_operations nv_ck804_ops = {
- .inherits = &nv_generic_ops,
+ .inherits = &nv_common_ops,
.freeze = nv_ck804_freeze,
.thaw = nv_ck804_thaw,
.host_stop = nv_ck804_host_stop,
};
static struct ata_port_operations nv_adma_ops = {
- .inherits = &nv_generic_ops,
+ .inherits = &nv_common_ops,
.check_atapi_dma = nv_adma_check_atapi_dma,
.sff_tf_read = nv_adma_tf_read,
};
static struct ata_port_operations nv_swncq_ops = {
- .inherits = &nv_generic_ops,
+ .inherits = &nv_common_ops,
.qc_defer = ata_std_qc_defer,
.qc_prep = nv_swncq_qc_prep,
ata_sff_thaw(ap);
}
+static int nv_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ int rc;
+
+ /* SATA hardreset fails to retrieve proper device signature on
+ * some controllers. Request follow up SRST. For more info,
+ * see http://bugzilla.kernel.org/show_bug.cgi?id=3352
+ */
+ rc = sata_sff_hardreset(link, class, deadline);
+ if (rc)
+ return rc;
+ return -EAGAIN;
+}
+
static void nv_adma_error_handler(struct ata_port *ap)
{
struct nv_adma_port_priv *pp = ap->private_data;
{
struct tty_driver *p, *res = NULL;
int tty_line = 0;
+ int len;
char *str;
+ for (str = name; *str; str++)
+ if ((*str >= '0' && *str <= '9') || *str == ',')
+ break;
+ if (!*str)
+ return NULL;
+
+ len = str - name;
+ tty_line = simple_strtoul(str, &str, 10);
+
mutex_lock(&tty_mutex);
/* Search through the tty devices to look for a match */
list_for_each_entry(p, &tty_drivers, tty_drivers) {
- str = name + strlen(p->name);
- tty_line = simple_strtoul(str, &str, 10);
+ if (strncmp(name, p->name, len) != 0)
+ continue;
if (*str == ',')
str++;
if (*str == '\0')
tristate "generic/default IDE chipset support"
depends on ALPHA || X86 || IA64 || M32R || MIPS
help
+ This is the generic IDE driver. This driver attaches to the
+ fixed legacy ports (e.g. on PCs 0x1f0/0x170, 0x1e8/0x168 and
+ so on). Please note that if this driver is built into the
+ kernel or loaded before other ATA (IDE or libata) drivers
+ and the controller is located at legacy ports, this driver
+ may grab those ports and thus can prevent the controller
+ specific driver from attaching.
+
+ Also, currently, IDE generic doesn't allow IRQ sharing
+ meaning that the IRQs it grabs won't be available to other
+ controllers sharing those IRQs which usually makes drivers
+ for those controllers fail. Generally, it's not a good idea
+ to load IDE generic driver on modern systems.
+
If unsure, say N.
config BLK_DEV_PLATFORM
{
idetape_tape_t *tape = drive->driver_data;
struct ide_atapi_pc pc;
- char fw_rev[6], vendor_id[10], product_id[18];
+ char fw_rev[4], vendor_id[8], product_id[16];
idetape_create_inquiry_cmd(&pc);
if (idetape_queue_pc_tail(drive, &pc)) {
memcpy(product_id, &pc.buf[16], 16);
memcpy(fw_rev, &pc.buf[32], 4);
- ide_fixstring(vendor_id, 10, 0);
- ide_fixstring(product_id, 18, 0);
- ide_fixstring(fw_rev, 6, 0);
+ ide_fixstring(vendor_id, 8, 0);
+ ide_fixstring(product_id, 16, 0);
+ ide_fixstring(fw_rev, 4, 0);
- printk(KERN_INFO "ide-tape: %s <-> %s: %s %s rev %s\n",
+ printk(KERN_INFO "ide-tape: %s <-> %s: %.8s %.16s rev %.4s\n",
drive->name, tape->name, vendor_id, product_id, fw_rev);
}
base = ioremap(offset, size);
+ memset(&hw, 0, sizeof(hw));
for (i = 0; i <= 7; i++)
hw.io_ports_array[i] =
(unsigned long)(base + ((0x1f0 + i) << 5));
WRT_REG_WORD(®->isp.hccr, HCCR_CLR_HOST_INT);
}
spin_unlock_irq(&ha->hardware_lock);
- ha->isp_ops->enable_intrs(ha);
fail:
return ret;
if (ret)
goto probe_failed;
+ ha->isp_ops->enable_intrs(ha);
+
scsi_scan_host(host);
qla2x00_alloc_sysfs_attr(ha);
ds[i].d_count = sg_dma_len(s);
}
sg_count -= n;
+ sg = s;
}
} else {
cmd->dataseg[0].d_base = 0;
void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
{
int result = cmd->result;
- int this_count = scsi_bufflen(cmd);
+ int this_count;
struct request_queue *q = cmd->device->request_queue;
struct request *req = cmd->request;
int error = 0;
*/
if (scsi_end_request(cmd, error, good_bytes, result == 0) == NULL)
return;
+ this_count = blk_rq_bytes(req);
/* good_bytes = 0, or (inclusive) there were leftovers and
* result = 0, so scsi_end_request couldn't retry.
#endif
break;
case SSB_BUSTYPE_SSB:
+ dev->dma_mask = &dev->coherent_dma_mask;
break;
}
if (dentry->d_parent != parent)
goto next;
+ /* non-existing due to RCU? */
+ if (d_unhashed(dentry))
+ goto next;
+
/*
* It is safe to compare names since d_move() cannot
* change the qstr (protected by d_lock).
goto next;
}
- if (!d_unhashed(dentry)) {
- atomic_inc(&dentry->d_count);
- found = dentry;
- }
+ atomic_inc(&dentry->d_count);
+ found = dentry;
spin_unlock(&dentry->d_lock);
break;
next:
tsk->active_mm = mm;
activate_mm(active_mm, mm);
task_unlock(tsk);
- mm_update_next_owner(old_mm);
arch_pick_mmap_layout(mm);
if (old_mm) {
up_read(&old_mm->mmap_sem);
BUG_ON(active_mm != old_mm);
+ mm_update_next_owner(old_mm);
mmput(old_mm);
return 0;
}
printk(KERN_DEBUG "\t%d orphan inode numbers:\n", n);
for (i = 0; i < n; i++)
printk(KERN_DEBUG "\t ino %llu\n",
- le64_to_cpu(orph->inos[i]));
+ (unsigned long long)le64_to_cpu(orph->inos[i]));
break;
}
default:
while (1) {
dbg_gen("feed '%s', ino %llu, new f_pos %#x",
- dent->name, le64_to_cpu(dent->inum),
+ dent->name, (unsigned long long)le64_to_cpu(dent->inum),
key_hash_flash(c, &dent->key));
ubifs_assert(dent->ch.sqnum > ubifs_inode(dir)->creat_sqnum);
rsvd_idx_lebs = 0;
lebs = c->lst.empty_lebs + c->freeable_cnt + c->idx_gc_cnt -
c->lst.taken_empty_lebs;
- ubifs_assert(lebs + c->lst.idx_lebs >= c->min_idx_lebs);
if (rsvd_idx_lebs < lebs)
/*
* OK to allocate an empty LEB, but we still don't want to go
err = move_nodes(c, sleb);
if (err)
- goto out;
+ goto out_inc_seq;
err = gc_sync_wbufs(c);
if (err)
- goto out;
+ goto out_inc_seq;
err = ubifs_change_one_lp(c, lnum, c->leb_size, 0, 0, 0, 0);
if (err)
- goto out;
+ goto out_inc_seq;
/* Allow for races with TNC */
c->gced_lnum = lnum;
out:
ubifs_scan_destroy(sleb);
return err;
+
+out_inc_seq:
+ /* We may have moved at least some nodes so allow for races with TNC */
+ c->gced_lnum = lnum;
+ smp_wmb();
+ c->gc_seq += 1;
+ smp_wmb();
+ goto out;
}
/**
goto out_dereg;
}
+ sprintf(c->bgt_name, BGT_NAME_PATTERN, c->vi.ubi_num, c->vi.vol_id);
if (!mounted_read_only) {
err = alloc_wbufs(c);
if (err)
goto out_cbuf;
/* Create background thread */
- sprintf(c->bgt_name, BGT_NAME_PATTERN, c->vi.ubi_num,
- c->vi.vol_id);
c->bgt = kthread_create(ubifs_bg_thread, c, c->bgt_name);
if (!c->bgt)
c->bgt = ERR_PTR(-EINVAL);
}
err = fallible_read_node(c, key, &zbr, node);
- if (maybe_leb_gced(c, zbr.lnum, gc_seq1)) {
+ if (err <= 0 || maybe_leb_gced(c, zbr.lnum, gc_seq1)) {
/*
* The node may have been GC'ed out from under us so try again
* while keeping the TNC mutex locked.
ASSERT(nextents <= XFS_LINEAR_EXTS);
size = nextents * sizeof(xfs_bmbt_rec_t);
- xfs_iext_irec_compact_full(ifp);
+ xfs_iext_irec_compact_pages(ifp);
ASSERT(ifp->if_real_bytes == XFS_IEXT_BUFSZ);
ep = ifp->if_u1.if_ext_irec->er_extbuf;
* compaction policy is as follows:
*
* Full Compaction: Extents fit into a single page (or inline buffer)
- * Full Compaction: Extents occupy less than 10% of allocated space
- * Partial Compaction: Extents occupy > 10% and < 50% of allocated space
+ * Partial Compaction: Extents occupy less than 50% of allocated space
* No Compaction: Extents occupy at least 50% of allocated space
*/
void
xfs_iext_direct_to_inline(ifp, nextents);
} else if (nextents <= XFS_LINEAR_EXTS) {
xfs_iext_indirect_to_direct(ifp);
- } else if (nextents < (nlists * XFS_LINEAR_EXTS) >> 3) {
- xfs_iext_irec_compact_full(ifp);
} else if (nextents < (nlists * XFS_LINEAR_EXTS) >> 1) {
xfs_iext_irec_compact_pages(ifp);
}
erp_next = erp + 1;
if (erp_next->er_extcount <=
(XFS_LINEAR_EXTS - erp->er_extcount)) {
- memmove(&erp->er_extbuf[erp->er_extcount],
+ memcpy(&erp->er_extbuf[erp->er_extcount],
erp_next->er_extbuf, erp_next->er_extcount *
sizeof(xfs_bmbt_rec_t));
erp->er_extcount += erp_next->er_extcount;
}
}
-/*
- * Fully compact the extent records managed by the indirection array.
- */
-void
-xfs_iext_irec_compact_full(
- xfs_ifork_t *ifp) /* inode fork pointer */
-{
- xfs_bmbt_rec_host_t *ep, *ep_next; /* extent record pointers */
- xfs_ext_irec_t *erp, *erp_next; /* extent irec pointers */
- int erp_idx = 0; /* extent irec index */
- int ext_avail; /* empty entries in ex list */
- int ext_diff; /* number of exts to add */
- int nlists; /* number of irec's (ex lists) */
-
- ASSERT(ifp->if_flags & XFS_IFEXTIREC);
-
- nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ;
- erp = ifp->if_u1.if_ext_irec;
- ep = &erp->er_extbuf[erp->er_extcount];
- erp_next = erp + 1;
- ep_next = erp_next->er_extbuf;
-
- while (erp_idx < nlists - 1) {
- /*
- * Check how many extent records are available in this irec.
- * If there is none skip the whole exercise.
- */
- ext_avail = XFS_LINEAR_EXTS - erp->er_extcount;
- if (ext_avail) {
-
- /*
- * Copy over as many as possible extent records into
- * the previous page.
- */
- ext_diff = MIN(ext_avail, erp_next->er_extcount);
- memcpy(ep, ep_next, ext_diff * sizeof(xfs_bmbt_rec_t));
- erp->er_extcount += ext_diff;
- erp_next->er_extcount -= ext_diff;
-
- /*
- * If the next irec is empty now we can simply
- * remove it.
- */
- if (erp_next->er_extcount == 0) {
- /*
- * Free page before removing extent record
- * so er_extoffs don't get modified in
- * xfs_iext_irec_remove.
- */
- kmem_free(erp_next->er_extbuf);
- erp_next->er_extbuf = NULL;
- xfs_iext_irec_remove(ifp, erp_idx + 1);
- erp = &ifp->if_u1.if_ext_irec[erp_idx];
- nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ;
-
- /*
- * If the next irec is not empty move up the content
- * that has not been copied to the previous page to
- * the beggining of this one.
- */
- } else {
- memmove(erp_next->er_extbuf, &ep_next[ext_diff],
- erp_next->er_extcount *
- sizeof(xfs_bmbt_rec_t));
- ep_next = erp_next->er_extbuf;
- memset(&ep_next[erp_next->er_extcount], 0,
- (XFS_LINEAR_EXTS -
- erp_next->er_extcount) *
- sizeof(xfs_bmbt_rec_t));
- }
- }
-
- if (erp->er_extcount == XFS_LINEAR_EXTS) {
- erp_idx++;
- if (erp_idx < nlists)
- erp = &ifp->if_u1.if_ext_irec[erp_idx];
- else
- break;
- }
- ep = &erp->er_extbuf[erp->er_extcount];
- erp_next = erp + 1;
- ep_next = erp_next->er_extbuf;
- }
-}
-
/*
* This is called to update the er_extoff field in the indirection
* array when extents have been added or removed from one of the
GDB_FS, /* 14 */
GDB_GS, /* 15 */
};
+#define NUMREGBYTES ((GDB_GS+1)*4)
#else /* ! CONFIG_X86_32 */
-enum regnames {
+enum regnames64 {
GDB_AX, /* 0 */
- GDB_DX, /* 1 */
+ GDB_BX, /* 1 */
GDB_CX, /* 2 */
- GDB_BX, /* 3 */
+ GDB_DX, /* 3 */
GDB_SI, /* 4 */
GDB_DI, /* 5 */
GDB_BP, /* 6 */
GDB_R14, /* 14 */
GDB_R15, /* 15 */
GDB_PC, /* 16 */
- GDB_PS, /* 17 */
};
-#endif /* CONFIG_X86_32 */
-/*
- * Number of bytes of registers:
- */
-#ifdef CONFIG_X86_32
-# define NUMREGBYTES 64
-#else
-# define NUMREGBYTES ((GDB_PS+1)*8)
-#endif
+enum regnames32 {
+ GDB_PS = 34,
+ GDB_CS,
+ GDB_SS,
+};
+#define NUMREGBYTES ((GDB_SS+1)*4)
+#endif /* CONFIG_X86_32 */
static inline void arch_kgdb_breakpoint(void)
{
*/
void cgroup_mm_owner_callbacks(struct task_struct *old, struct task_struct *new)
{
- struct cgroup *oldcgrp, *newcgrp;
+ struct cgroup *oldcgrp, *newcgrp = NULL;
if (need_mm_owner_callback) {
int i;
for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
struct cgroup_subsys *ss = subsys[i];
oldcgrp = task_cgroup(old, ss->subsys_id);
- newcgrp = task_cgroup(new, ss->subsys_id);
+ if (new)
+ newcgrp = task_cgroup(new, ss->subsys_id);
if (oldcgrp == newcgrp)
continue;
if (ss->mm_owner_changed)
* If there are other users of the mm and the owner (us) is exiting
* we need to find a new owner to take on the responsibility.
*/
- if (!mm)
- return 0;
if (atomic_read(&mm->mm_users) <= 1)
return 0;
if (mm->owner != p)
} while_each_thread(g, c);
read_unlock(&tasklist_lock);
+ /*
+ * We found no owner yet mm_users > 1: this implies that we are
+ * most likely racing with swapoff (try_to_unuse()) or /proc or
+ * ptrace or page migration (get_task_mm()). Mark owner as NULL,
+ * so that subsystems can understand the callback and take action.
+ */
+ down_write(&mm->mmap_sem);
+ cgroup_mm_owner_callbacks(mm->owner, NULL);
+ mm->owner = NULL;
+ up_write(&mm->mmap_sem);
return;
assign_new_owner:
if (err)
return err;
if (CACHE_FLUSH_IS_SAFE)
- flush_icache_range(addr, addr + length + 1);
+ flush_icache_range(addr, addr + length);
return 0;
}
* Get the passive CPU lock which will hold all the non-primary
* CPU in a spin state while the debugger is active
*/
- if (!kgdb_single_step || !kgdb_contthread) {
+ if (!kgdb_single_step) {
for (i = 0; i < NR_CPUS; i++)
atomic_set(&passive_cpu_wait[i], 1);
}
#ifdef CONFIG_SMP
/* Signal the other CPUs to enter kgdb_wait() */
- if ((!kgdb_single_step || !kgdb_contthread) && kgdb_do_roundup)
+ if ((!kgdb_single_step) && kgdb_do_roundup)
kgdb_roundup_cpus(flags);
#endif
kgdb_post_primary_code(ks->linux_regs, ks->ex_vector, ks->err_code);
kgdb_deactivate_sw_breakpoints();
kgdb_single_step = 0;
- kgdb_contthread = NULL;
+ kgdb_contthread = current;
exception_level = 0;
/* Talk to debugger with gdbserial protocol */
kgdb_info[ks->cpu].task = NULL;
atomic_set(&cpu_in_kgdb[ks->cpu], 0);
- if (!kgdb_single_step || !kgdb_contthread) {
+ if (!kgdb_single_step) {
for (i = NR_CPUS-1; i >= 0; i--)
atomic_set(&passive_cpu_wait[i], 0);
/*
struct mem_cgroup *mem_cgroup_from_task(struct task_struct *p)
{
+ /*
+ * mm_update_next_owner() may clear mm->owner to NULL
+ * if it races with swapoff, page migration, etc.
+ * So this can be called with p == NULL.
+ */
+ if (unlikely(!p))
+ return NULL;
+
return container_of(task_subsys_state(p, mem_cgroup_subsys_id),
struct mem_cgroup, css);
}
if (likely(!memcg)) {
rcu_read_lock();
mem = mem_cgroup_from_task(rcu_dereference(mm->owner));
+ if (unlikely(!mem)) {
+ rcu_read_unlock();
+ kmem_cache_free(page_cgroup_cache, pc);
+ return 0;
+ }
/*
* For every charge from the cgroup, increment reference count
*/
rcu_read_lock();
mem = mem_cgroup_from_task(rcu_dereference(mm->owner));
+ if (unlikely(!mem)) {
+ rcu_read_unlock();
+ return 0;
+ }
css_get(&mem->css);
rcu_read_unlock();
static int indent = 1;
static int valid_stdin = 1;
+static int sync_kconfig;
static int conf_cnt;
static char line[128];
static struct menu *rootEntry;
static void check_stdin(void)
{
- if (!valid_stdin && input_mode == ask_silent) {
+ if (!valid_stdin) {
printf(_("aborted!\n\n"));
printf(_("Console input/output is redirected. "));
printf(_("Run 'make oldconfig' to update configuration.\n\n"));
check_conf(child);
}
-static void conf_do_update(void)
-{
- /* Update until a loop caused no more changes */
- do {
- conf_cnt = 0;
- check_conf(&rootmenu);
- } while (conf_cnt);
-}
-
-static int conf_silent_update(void)
-{
- const char *name;
-
- if (conf_get_changed()) {
- name = getenv("KCONFIG_NOSILENTUPDATE");
- if (name && *name) {
- fprintf(stderr,
- _("\n*** Kernel configuration requires explicit update.\n\n"));
- return 1;
- }
- conf_do_update();
- }
- return 0;
-}
-
-static int conf_update(void)
-{
- rootEntry = &rootmenu;
- conf(&rootmenu);
- if (input_mode == ask_all) {
- input_mode = ask_silent;
- valid_stdin = 1;
- }
- conf_do_update();
- return 0;
-}
-
int main(int ac, char **av)
{
int opt;
while ((opt = getopt(ac, av, "osdD:nmyrh")) != -1) {
switch (opt) {
case 'o':
- input_mode = ask_new;
+ input_mode = ask_silent;
break;
case 's':
input_mode = ask_silent;
- valid_stdin = isatty(0) && isatty(1) && isatty(2);
+ sync_kconfig = 1;
break;
case 'd':
input_mode = set_default;
name = av[optind];
conf_parse(name);
//zconfdump(stdout);
+ if (sync_kconfig) {
+ if (stat(".config", &tmpstat)) {
+ fprintf(stderr, _("***\n"
+ "*** You have not yet configured your kernel!\n"
+ "*** (missing kernel .config file)\n"
+ "***\n"
+ "*** Please run some configurator (e.g. \"make oldconfig\" or\n"
+ "*** \"make menuconfig\" or \"make xconfig\").\n"
+ "***\n"));
+ exit(1);
+ }
+ }
+
switch (input_mode) {
case set_default:
if (!defconfig_file)
}
break;
case ask_silent:
- if (stat(".config", &tmpstat)) {
- printf(_("***\n"
- "*** You have not yet configured your kernel!\n"
- "*** (missing kernel .config file)\n"
- "***\n"
- "*** Please run some configurator (e.g. \"make oldconfig\" or\n"
- "*** \"make menuconfig\" or \"make xconfig\").\n"
- "***\n"));
- exit(1);
- }
case ask_all:
case ask_new:
conf_read(NULL);
default:
break;
}
+
+ if (sync_kconfig) {
+ if (conf_get_changed()) {
+ name = getenv("KCONFIG_NOSILENTUPDATE");
+ if (name && *name) {
+ fprintf(stderr,
+ _("\n*** Kernel configuration requires explicit update.\n\n"));
+ return 1;
+ }
+ }
+ valid_stdin = isatty(0) && isatty(1) && isatty(2);
+ }
+
switch (input_mode) {
case set_no:
conf_set_all_new_symbols(def_no);
case set_default:
conf_set_all_new_symbols(def_default);
break;
- case ask_silent:
case ask_new:
- if (conf_silent_update())
- exit(1);
- break;
case ask_all:
- if (conf_update())
- exit(1);
+ rootEntry = &rootmenu;
+ conf(&rootmenu);
+ input_mode = ask_silent;
+ /* fall through */
+ case ask_silent:
+ /* Update until a loop caused no more changes */
+ do {
+ conf_cnt = 0;
+ check_conf(&rootmenu);
+ } while (conf_cnt);
break;
}
- if (conf_write(NULL)) {
- fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n"));
- exit(1);
- }
- /* ask_silent is used during the build so we shall update autoconf.
- * All other commands are only used to generate a config.
- */
- if (input_mode == ask_silent && conf_write_autoconf()) {
- fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n"));
- return 1;
+ if (sync_kconfig) {
+ /* silentoldconfig is used during the build so we shall update autoconf.
+ * All other commands are only used to generate a config.
+ */
+ if (conf_get_changed() && conf_write(NULL)) {
+ fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n"));
+ exit(1);
+ }
+ if (conf_write_autoconf()) {
+ fprintf(stderr, _("\n*** Error during update of the kernel configuration.\n\n"));
+ return 1;
+ }
+ } else {
+ if (conf_write(NULL)) {
+ fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n"));
+ exit(1);
+ }
}
return 0;
}
continue;
if (def == S_DEF_USER) {
sym = sym_find(line + 9);
- if (!sym)
+ if (!sym) {
+ sym_add_change_count(1);
break;
+ }
} else {
sym = sym_lookup(line + 9, 0);
if (sym->type == S_UNKNOWN)
}
if (def == S_DEF_USER) {
sym = sym_find(line + 7);
- if (!sym)
+ if (!sym) {
+ sym_add_change_count(1);
break;
+ }
} else {
sym = sym_lookup(line + 7, 0);
if (sym->type == S_UNKNOWN)
return -ENODEV;
card = pcm->card;
- down_read(&card->controls_rwsem);
+ read_lock(&card->ctl_files_rwlock);
list_for_each_entry(kctl, &card->ctl_files, list) {
if (kctl->pid == current->pid) {
prefer_subdevice = kctl->prefer_pcm_subdevice;
break;
}
}
- up_read(&card->controls_rwsem);
+ read_unlock(&card->ctl_files_rwlock);
switch (stream) {
case SNDRV_PCM_STREAM_PLAYBACK:
card = substream->pcm->card;
if (runtime->status->state == SNDRV_PCM_STATE_OPEN ||
- runtime->status->state == SNDRV_PCM_STATE_DISCONNECTED)
+ runtime->status->state == SNDRV_PCM_STATE_DISCONNECTED ||
+ runtime->status->state == SNDRV_PCM_STATE_SUSPENDED)
return -EBADFD;
- snd_power_lock(card);
- if (runtime->status->state == SNDRV_PCM_STATE_SUSPENDED) {
- result = snd_power_wait(card, SNDRV_CTL_POWER_D0);
- if (result < 0)
- goto _unlock;
- }
-
snd_pcm_stream_lock_irq(substream);
/* resume pause */
if (runtime->status->state == SNDRV_PCM_STATE_PAUSED)
snd_pcm_stop(substream, SNDRV_PCM_STATE_SETUP);
/* runtime->control->appl_ptr = runtime->status->hw_ptr; */
snd_pcm_stream_unlock_irq(substream);
- _unlock:
- snd_power_unlock(card);
+
return result;
}
mutex_lock(&rmidi->open_mutex);
while (1) {
subdevice = -1;
- down_read(&card->controls_rwsem);
+ read_lock(&card->ctl_files_rwlock);
list_for_each_entry(kctl, &card->ctl_files, list) {
if (kctl->pid == current->pid) {
subdevice = kctl->prefer_rawmidi_subdevice;
break;
}
}
- up_read(&card->controls_rwsem);
+ read_unlock(&card->ctl_files_rwlock);
err = snd_rawmidi_kernel_open(rmidi->card, rmidi->device,
subdevice, fflags, rawmidi_file);
if (err >= 0)
#endif
-static int cs4270_i2c_probe(struct i2c_adapter *adap, int addr, int kind);
-
-/*
- * Notify the driver that a new I2C bus has been found.
- *
- * This function is called for each I2C bus in the system. The function
- * then asks the I2C subsystem to probe that bus at the addresses on which
- * our device (the CS4270) could exist. If a device is found at one of
- * those addresses, then our probe function (cs4270_i2c_probe) is called.
- */
-static int cs4270_i2c_attach(struct i2c_adapter *adapter)
-{
- return i2c_probe(adapter, &addr_data, cs4270_i2c_probe);
-}
-
-static int cs4270_i2c_detach(struct i2c_client *client)
-{
- struct snd_soc_codec *codec = i2c_get_clientdata(client);
-
- i2c_detach_client(client);
- codec->control_data = NULL;
-
- kfree(codec->reg_cache);
- codec->reg_cache = NULL;
-
- kfree(client);
- return 0;
-}
+static int cs4270_i2c_probe(struct i2c_client *, const struct i2c_device_id *);
/* A list of non-DAPM controls that the CS4270 supports */
static const struct snd_kcontrol_new cs4270_snd_controls[] = {
CS4270_VOLA, CS4270_VOLB, 0, 0xFF, 1)
};
+static const struct i2c_device_id cs4270_id[] = {
+ {"cs4270", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, cs4270_id);
+
static struct i2c_driver cs4270_i2c_driver = {
.driver = {
.name = "CS4270 I2C",
.owner = THIS_MODULE,
},
- .id = I2C_DRIVERID_CS4270,
- .attach_adapter = cs4270_i2c_attach,
- .detach_client = cs4270_i2c_detach,
+ .id_table = cs4270_id,
+ .probe = cs4270_i2c_probe,
};
/*
* Note: snd_soc_new_pcms() must be called before this function can be called,
* because of snd_ctl_add().
*/
-static int cs4270_i2c_probe(struct i2c_adapter *adapter, int addr, int kind)
+static int cs4270_i2c_probe(struct i2c_client *i2c_client,
+ const struct i2c_device_id *id)
{
struct snd_soc_device *socdev = cs4270_socdev;
struct snd_soc_codec *codec = socdev->codec;
- struct i2c_client *i2c_client = NULL;
int i;
int ret = 0;
/* Note: codec_dai->codec is NULL here */
- i2c_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (!i2c_client) {
- printk(KERN_ERR "cs4270: could not allocate I2C client\n");
- return -ENOMEM;
- }
-
codec->reg_cache = kzalloc(CS4270_NUMREGS, GFP_KERNEL);
if (!codec->reg_cache) {
printk(KERN_ERR "cs4270: could not allocate register cache\n");
goto error;
}
- i2c_set_clientdata(i2c_client, codec);
- strcpy(i2c_client->name, "CS4270");
-
- i2c_client->driver = &cs4270_i2c_driver;
- i2c_client->adapter = adapter;
- i2c_client->addr = addr;
-
/* Verify that we have a CS4270 */
ret = i2c_smbus_read_byte_data(i2c_client, CS4270_CHIPID);
goto error;
}
- printk(KERN_INFO "cs4270: found device at I2C address %X\n", addr);
+ printk(KERN_INFO "cs4270: found device at I2C address %X\n",
+ i2c_client->addr);
printk(KERN_INFO "cs4270: hardware revision %X\n", ret & 0xF);
- /* Tell the I2C layer a new client has arrived */
-
- ret = i2c_attach_client(i2c_client);
- if (ret) {
- printk(KERN_ERR "cs4270: could not attach codec, "
- "I2C address %x, error code %i\n", addr, ret);
- goto error;
- }
-
codec->control_data = i2c_client;
codec->read = cs4270_read_reg_cache;
codec->write = cs4270_i2c_write;
goto error;
}
+ i2c_set_clientdata(i2c_client, codec);
+
return 0;
error:
- if (codec->control_data) {
- i2c_detach_client(i2c_client);
- codec->control_data = NULL;
- }
+ codec->control_data = NULL;
kfree(codec->reg_cache);
codec->reg_cache = NULL;
codec->reg_cache_size = 0;
- kfree(i2c_client);
-
return ret;
}
projects / linux-2.6-omap-h63xx.git / commitdiff