bool
default y
+config XICS
+ depends on PPC_PSERIES
+ bool
+ default y
+
+config MPIC
+ depends on PPC_PSERIES || PPC_PMAC || PPC_MAPLE
+ bool
+ default y
+
+config BPA_IIC
+ depends on PPC_BPA
+ bool
+ default y
+
# VMX is pSeries only for now until somebody writes the iSeries
# exception vectors for it
config ALTIVEC
mf.o HvLpEvent.o iSeries_proc.o iSeries_htab.o \
iSeries_iommu.o
-obj-$(CONFIG_PPC_MULTIPLATFORM) += nvram.o i8259.o prom_init.o prom.o mpic.o
+obj-$(CONFIG_PPC_MULTIPLATFORM) += nvram.o i8259.o prom_init.o prom.o
obj-$(CONFIG_PPC_PSERIES) += pSeries_pci.o pSeries_lpar.o pSeries_hvCall.o \
pSeries_nvram.o rtasd.o ras.o pSeries_reconfig.o \
- xics.o pSeries_setup.o pSeries_iommu.o
+ pSeries_setup.o pSeries_iommu.o
-obj-$(CONFIG_PPC_BPA) += bpa_setup.o bpa_nvram.o
+obj-$(CONFIG_PPC_BPA) += bpa_setup.o bpa_nvram.o bpa_iic.o spider-pic.o
obj-$(CONFIG_EEH) += eeh.o
obj-$(CONFIG_PROC_FS) += proc_ppc64.o
obj-$(CONFIG_BOOTX_TEXT) += btext.o
obj-$(CONFIG_HVCS) += hvcserver.o
obj-$(CONFIG_IBMVIO) += vio.o
+obj-$(CONFIG_XICS) += xics.o
+obj-$(CONFIG_MPIC) += mpic.o
obj-$(CONFIG_PPC_PMAC) += pmac_setup.o pmac_feature.o pmac_pci.o \
pmac_time.o pmac_nvram.o pmac_low_i2c.o
--- /dev/null
+/*
+ * BPA Internal Interrupt Controller
+ *
+ * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
+ *
+ * Author: Arnd Bergmann <arndb@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/percpu.h>
+#include <linux/types.h>
+
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/prom.h>
+#include <asm/ptrace.h>
+
+#include "bpa_iic.h"
+
+struct iic_pending_bits {
+ u32 data;
+ u8 flags;
+ u8 class;
+ u8 source;
+ u8 prio;
+};
+
+enum iic_pending_flags {
+ IIC_VALID = 0x80,
+ IIC_IPI = 0x40,
+};
+
+struct iic_regs {
+ struct iic_pending_bits pending;
+ struct iic_pending_bits pending_destr;
+ u64 generate;
+ u64 prio;
+};
+
+struct iic {
+ struct iic_regs __iomem *regs;
+};
+
+static DEFINE_PER_CPU(struct iic, iic);
+
+void iic_local_enable(void)
+{
+ out_be64(&__get_cpu_var(iic).regs->prio, 0xff);
+}
+
+void iic_local_disable(void)
+{
+ out_be64(&__get_cpu_var(iic).regs->prio, 0x0);
+}
+
+static unsigned int iic_startup(unsigned int irq)
+{
+ return 0;
+}
+
+static void iic_enable(unsigned int irq)
+{
+ iic_local_enable();
+}
+
+static void iic_disable(unsigned int irq)
+{
+}
+
+static void iic_end(unsigned int irq)
+{
+ iic_local_enable();
+}
+
+static struct hw_interrupt_type iic_pic = {
+ .typename = " BPA-IIC ",
+ .startup = iic_startup,
+ .enable = iic_enable,
+ .disable = iic_disable,
+ .end = iic_end,
+};
+
+static int iic_external_get_irq(struct iic_pending_bits pending)
+{
+ int irq;
+ unsigned char node, unit;
+
+ node = pending.source >> 4;
+ unit = pending.source & 0xf;
+ irq = -1;
+
+ /*
+ * This mapping is specific to the Broadband
+ * Engine. We might need to get the numbers
+ * from the device tree to support future CPUs.
+ */
+ switch (unit) {
+ case 0x00:
+ case 0x0b:
+ /*
+ * One of these units can be connected
+ * to an external interrupt controller.
+ */
+ if (pending.prio > 0x3f ||
+ pending.class != 2)
+ break;
+ irq = IIC_EXT_OFFSET
+ + spider_get_irq(pending.prio + node * IIC_NODE_STRIDE)
+ + node * IIC_NODE_STRIDE;
+ break;
+ case 0x01 ... 0x04:
+ case 0x07 ... 0x0a:
+ /*
+ * These units are connected to the SPEs
+ */
+ if (pending.class > 2)
+ break;
+ irq = IIC_SPE_OFFSET
+ + pending.class * IIC_CLASS_STRIDE
+ + node * IIC_NODE_STRIDE
+ + unit;
+ break;
+ }
+ if (irq == -1)
+ printk(KERN_WARNING "Unexpected interrupt class %02x, "
+ "source %02x, prio %02x, cpu %02x\n", pending.class,
+ pending.source, pending.prio, smp_processor_id());
+ return irq;
+}
+
+/* Get an IRQ number from the pending state register of the IIC */
+int iic_get_irq(struct pt_regs *regs)
+{
+ struct iic *iic;
+ int irq;
+ struct iic_pending_bits pending;
+
+ iic = &__get_cpu_var(iic);
+ *(unsigned long *) &pending =
+ in_be64((unsigned long __iomem *) &iic->regs->pending_destr);
+
+ irq = -1;
+ if (pending.flags & IIC_VALID) {
+ if (pending.flags & IIC_IPI) {
+ irq = IIC_IPI_OFFSET + (pending.prio >> 4);
+/*
+ if (irq > 0x80)
+ printk(KERN_WARNING "Unexpected IPI prio %02x"
+ "on CPU %02x\n", pending.prio,
+ smp_processor_id());
+*/
+ } else {
+ irq = iic_external_get_irq(pending);
+ }
+ }
+ return irq;
+}
+
+static struct iic_regs __iomem *find_iic(int cpu)
+{
+ struct device_node *np;
+ int nodeid = cpu / 2;
+ unsigned long regs;
+ struct iic_regs __iomem *iic_regs;
+
+ for (np = of_find_node_by_type(NULL, "cpu");
+ np;
+ np = of_find_node_by_type(np, "cpu")) {
+ if (nodeid == *(int *)get_property(np, "node-id", NULL))
+ break;
+ }
+
+ if (!np) {
+ printk(KERN_WARNING "IIC: CPU %d not found\n", cpu);
+ iic_regs = NULL;
+ } else {
+ regs = *(long *)get_property(np, "iic", NULL);
+
+ /* hack until we have decided on the devtree info */
+ regs += 0x400;
+ if (cpu & 1)
+ regs += 0x20;
+
+ printk(KERN_DEBUG "IIC for CPU %d at %lx\n", cpu, regs);
+ iic_regs = __ioremap(regs, sizeof(struct iic_regs),
+ _PAGE_NO_CACHE);
+ }
+ return iic_regs;
+}
+
+#ifdef CONFIG_SMP
+void iic_setup_cpu(void)
+{
+ out_be64(&__get_cpu_var(iic).regs->prio, 0xff);
+}
+
+void iic_cause_IPI(int cpu, int mesg)
+{
+ out_be64(&per_cpu(iic, cpu).regs->generate, mesg);
+}
+
+static irqreturn_t iic_ipi_action(int irq, void *dev_id, struct pt_regs *regs)
+{
+
+ smp_message_recv(irq - IIC_IPI_OFFSET, regs);
+ return IRQ_HANDLED;
+}
+
+static void iic_request_ipi(int irq, const char *name)
+{
+ /* IPIs are marked SA_INTERRUPT as they must run with irqs
+ * disabled */
+ get_irq_desc(irq)->handler = &iic_pic;
+ get_irq_desc(irq)->status |= IRQ_PER_CPU;
+ request_irq(irq, iic_ipi_action, SA_INTERRUPT, name, NULL);
+}
+
+void iic_request_IPIs(void)
+{
+ iic_request_ipi(IIC_IPI_OFFSET + PPC_MSG_CALL_FUNCTION, "IPI-call");
+ iic_request_ipi(IIC_IPI_OFFSET + PPC_MSG_RESCHEDULE, "IPI-resched");
+#ifdef CONFIG_DEBUGGER
+ iic_request_ipi(IIC_IPI_OFFSET + PPC_MSG_DEBUGGER_BREAK, "IPI-debug");
+#endif /* CONFIG_DEBUGGER */
+}
+#endif /* CONFIG_SMP */
+
+static void iic_setup_spe_handlers(void)
+{
+ int be, isrc;
+
+ /* Assume two threads per BE are present */
+ for (be=0; be < num_present_cpus() / 2; be++) {
+ for (isrc = 0; isrc < IIC_CLASS_STRIDE * 3; isrc++) {
+ int irq = IIC_NODE_STRIDE * be + IIC_SPE_OFFSET + isrc;
+ get_irq_desc(irq)->handler = &iic_pic;
+ }
+ }
+}
+
+void iic_init_IRQ(void)
+{
+ int cpu, irq_offset;
+ struct iic *iic;
+
+ irq_offset = 0;
+ for_each_cpu(cpu) {
+ iic = &per_cpu(iic, cpu);
+ iic->regs = find_iic(cpu);
+ if (iic->regs)
+ out_be64(&iic->regs->prio, 0xff);
+ }
+ iic_setup_spe_handlers();
+}
--- /dev/null
+#ifndef ASM_BPA_IIC_H
+#define ASM_BPA_IIC_H
+#ifdef __KERNEL__
+/*
+ * Mapping of IIC pending bits into per-node
+ * interrupt numbers.
+ *
+ * IRQ FF CC SS PP FF CC SS PP Description
+ *
+ * 00-3f 80 02 +0 00 - 80 02 +0 3f South Bridge
+ * 00-3f 80 02 +b 00 - 80 02 +b 3f South Bridge
+ * 41-4a 80 00 +1 ** - 80 00 +a ** SPU Class 0
+ * 51-5a 80 01 +1 ** - 80 01 +a ** SPU Class 1
+ * 61-6a 80 02 +1 ** - 80 02 +a ** SPU Class 2
+ * 70-7f C0 ** ** 00 - C0 ** ** 0f IPI
+ *
+ * F flags
+ * C class
+ * S source
+ * P Priority
+ * + node number
+ * * don't care
+ *
+ * A node consists of a Broadband Engine and an optional
+ * south bridge device providing a maximum of 64 IRQs.
+ * The south bridge may be connected to either IOIF0
+ * or IOIF1.
+ * Each SPE is represented as three IRQ lines, one per
+ * interrupt class.
+ * 16 IRQ numbers are reserved for inter processor
+ * interruptions, although these are only used in the
+ * range of the first node.
+ *
+ * This scheme needs 128 IRQ numbers per BIF node ID,
+ * which means that with the total of 512 lines
+ * available, we can have a maximum of four nodes.
+ */
+
+enum {
+ IIC_EXT_OFFSET = 0x00, /* Start of south bridge IRQs */
+ IIC_NUM_EXT = 0x40, /* Number of south bridge IRQs */
+ IIC_SPE_OFFSET = 0x40, /* Start of SPE interrupts */
+ IIC_CLASS_STRIDE = 0x10, /* SPE IRQs per class */
+ IIC_IPI_OFFSET = 0x70, /* Start of IPI IRQs */
+ IIC_NUM_IPIS = 0x10, /* IRQs reserved for IPI */
+ IIC_NODE_STRIDE = 0x80, /* Total IRQs per node */
+};
+
+extern void iic_init_IRQ(void);
+extern int iic_get_irq(struct pt_regs *regs);
+extern void iic_cause_IPI(int cpu, int mesg);
+extern void iic_request_IPIs(void);
+extern void iic_setup_cpu(void);
+extern void iic_local_enable(void);
+extern void iic_local_disable(void);
+
+
+extern void spider_init_IRQ(void);
+extern int spider_get_irq(unsigned long int_pending);
+
+#endif
+#endif /* ASM_BPA_IIC_H */
#include <asm/cputable.h>
#include "pci.h"
+#include "bpa_iic.h"
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
static void __init bpa_setup_arch(void)
{
+ ppc_md.init_IRQ = iic_init_IRQ;
+ ppc_md.get_irq = iic_get_irq;
+
#ifdef CONFIG_SMP
smp_init_pSeries();
#endif
/* Find and initialize PCI host bridges */
init_pci_config_tokens();
find_and_init_phbs();
-
+ spider_init_IRQ();
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#endif
/*
- * SMP support for pSeries machines.
+ * SMP support for pSeries and BPA machines.
*
* Dave Engebretsen, Peter Bergner, and
* Mike Corrigan {engebret|bergner|mikec}@us.ibm.com
#include <asm/pSeries_reconfig.h>
#include "mpic.h"
+#include "bpa_iic.h"
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
return 1;
}
+#ifdef CONFIG_XICS
static inline void smp_xics_do_message(int cpu, int msg)
{
set_bit(msg, &xics_ipi_message[cpu].value);
cpu_clear(cpu, of_spin_map);
}
+#endif /* CONFIG_XICS */
+#ifdef CONFIG_BPA_IIC
+static void smp_iic_message_pass(int target, int msg)
+{
+ unsigned int i;
+
+ if (target < NR_CPUS) {
+ iic_cause_IPI(target, msg);
+ } else {
+ for_each_online_cpu(i) {
+ if (target == MSG_ALL_BUT_SELF
+ && i == smp_processor_id())
+ continue;
+ iic_cause_IPI(i, msg);
+ }
+ }
+}
+
+static int __init smp_iic_probe(void)
+{
+ iic_request_IPIs();
+
+ return cpus_weight(cpu_possible_map);
+}
+
+static void __devinit smp_iic_setup_cpu(int cpu)
+{
+ if (cpu != boot_cpuid)
+ iic_setup_cpu();
+}
+#endif /* CONFIG_BPA_IIC */
static DEFINE_SPINLOCK(timebase_lock);
static unsigned long timebase = 0;
return 1;
}
-
+#ifdef CONFIG_MPIC
static struct smp_ops_t pSeries_mpic_smp_ops = {
.message_pass = smp_mpic_message_pass,
.probe = smp_mpic_probe,
.kick_cpu = smp_pSeries_kick_cpu,
.setup_cpu = smp_mpic_setup_cpu,
};
-
+#endif
+#ifdef CONFIG_XICS
static struct smp_ops_t pSeries_xics_smp_ops = {
.message_pass = smp_xics_message_pass,
.probe = smp_xics_probe,
.setup_cpu = smp_xics_setup_cpu,
.cpu_bootable = smp_pSeries_cpu_bootable,
};
+#endif
+#ifdef CONFIG_BPA_IIC
+static struct smp_ops_t bpa_iic_smp_ops = {
+ .message_pass = smp_iic_message_pass,
+ .probe = smp_iic_probe,
+ .kick_cpu = smp_pSeries_kick_cpu,
+ .setup_cpu = smp_iic_setup_cpu,
+ .cpu_bootable = smp_pSeries_cpu_bootable,
+};
+#endif
/* This is called very early */
void __init smp_init_pSeries(void)
DBG(" -> smp_init_pSeries()\n");
- if (ppc64_interrupt_controller == IC_OPEN_PIC)
+ switch (ppc64_interrupt_controller) {
+#ifdef CONFIG_MPIC
+ case IC_OPEN_PIC:
smp_ops = &pSeries_mpic_smp_ops;
- else
+ break;
+#endif
+#ifdef CONFIG_XICS
+ case IC_PPC_XIC:
smp_ops = &pSeries_xics_smp_ops;
+ break;
+#endif
+#ifdef CONFIG_BPA_IIC
+ case IC_BPA_IIC:
+ smp_ops = &bpa_iic_smp_ops;
+ break;
+#endif
+ default:
+ panic("Invalid interrupt controller");
+ }
#ifdef CONFIG_HOTPLUG_CPU
smp_ops->cpu_disable = pSeries_cpu_disable;
int smt_enabled_at_boot = 1;
-#ifdef CONFIG_PPC_MULTIPLATFORM
+#ifdef CONFIG_MPIC
void smp_mpic_message_pass(int target, int msg)
{
/* make sure we're sending something that translates to an IPI */
smp_mb();
}
-#endif /* CONFIG_PPC_MULTIPLATFORM */
+#endif /* CONFIG_MPIC */
static void __init smp_space_timers(unsigned int max_cpus)
{
--- /dev/null
+/*
+ * External Interrupt Controller on Spider South Bridge
+ *
+ * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
+ *
+ * Author: Arnd Bergmann <arndb@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <asm/pgtable.h>
+#include <asm/prom.h>
+#include <asm/io.h>
+
+#include "bpa_iic.h"
+
+/* register layout taken from Spider spec, table 7.4-4 */
+enum {
+ TIR_DEN = 0x004, /* Detection Enable Register */
+ TIR_MSK = 0x084, /* Mask Level Register */
+ TIR_EDC = 0x0c0, /* Edge Detection Clear Register */
+ TIR_PNDA = 0x100, /* Pending Register A */
+ TIR_PNDB = 0x104, /* Pending Register B */
+ TIR_CS = 0x144, /* Current Status Register */
+ TIR_LCSA = 0x150, /* Level Current Status Register A */
+ TIR_LCSB = 0x154, /* Level Current Status Register B */
+ TIR_LCSC = 0x158, /* Level Current Status Register C */
+ TIR_LCSD = 0x15c, /* Level Current Status Register D */
+ TIR_CFGA = 0x200, /* Setting Register A0 */
+ TIR_CFGB = 0x204, /* Setting Register B0 */
+ /* 0x208 ... 0x3ff Setting Register An/Bn */
+ TIR_PPNDA = 0x400, /* Packet Pending Register A */
+ TIR_PPNDB = 0x404, /* Packet Pending Register B */
+ TIR_PIERA = 0x408, /* Packet Output Error Register A */
+ TIR_PIERB = 0x40c, /* Packet Output Error Register B */
+ TIR_PIEN = 0x444, /* Packet Output Enable Register */
+ TIR_PIPND = 0x454, /* Packet Output Pending Register */
+ TIRDID = 0x484, /* Spider Device ID Register */
+ REISTIM = 0x500, /* Reissue Command Timeout Time Setting */
+ REISTIMEN = 0x504, /* Reissue Command Timeout Setting */
+ REISWAITEN = 0x508, /* Reissue Wait Control*/
+};
+
+static void __iomem *spider_pics[4];
+
+static void __iomem *spider_get_pic(int irq)
+{
+ int node = irq / IIC_NODE_STRIDE;
+ irq %= IIC_NODE_STRIDE;
+
+ if (irq >= IIC_EXT_OFFSET &&
+ irq < IIC_EXT_OFFSET + IIC_NUM_EXT &&
+ spider_pics)
+ return spider_pics[node];
+ return NULL;
+}
+
+static int spider_get_nr(unsigned int irq)
+{
+ return (irq % IIC_NODE_STRIDE) - IIC_EXT_OFFSET;
+}
+
+static void __iomem *spider_get_irq_config(int irq)
+{
+ void __iomem *pic;
+ pic = spider_get_pic(irq);
+ return pic + TIR_CFGA + 8 * spider_get_nr(irq);
+}
+
+static void spider_enable_irq(unsigned int irq)
+{
+ void __iomem *cfg = spider_get_irq_config(irq);
+ irq = spider_get_nr(irq);
+
+ out_be32(cfg, in_be32(cfg) | 0x3107000eu);
+ out_be32(cfg + 4, in_be32(cfg + 4) | 0x00020000u | irq);
+}
+
+static void spider_disable_irq(unsigned int irq)
+{
+ void __iomem *cfg = spider_get_irq_config(irq);
+ irq = spider_get_nr(irq);
+
+ out_be32(cfg, in_be32(cfg) & ~0x30000000u);
+}
+
+static unsigned int spider_startup_irq(unsigned int irq)
+{
+ spider_enable_irq(irq);
+ return 0;
+}
+
+static void spider_shutdown_irq(unsigned int irq)
+{
+ spider_disable_irq(irq);
+}
+
+static void spider_end_irq(unsigned int irq)
+{
+ spider_enable_irq(irq);
+}
+
+static void spider_ack_irq(unsigned int irq)
+{
+ spider_disable_irq(irq);
+ iic_local_enable();
+}
+
+static struct hw_interrupt_type spider_pic = {
+ .typename = " SPIDER ",
+ .startup = spider_startup_irq,
+ .shutdown = spider_shutdown_irq,
+ .enable = spider_enable_irq,
+ .disable = spider_disable_irq,
+ .ack = spider_ack_irq,
+ .end = spider_end_irq,
+};
+
+
+int spider_get_irq(unsigned long int_pending)
+{
+ void __iomem *regs = spider_get_pic(int_pending);
+ unsigned long cs;
+ int irq;
+
+ cs = in_be32(regs + TIR_CS);
+
+ irq = cs >> 24;
+ if (irq != 63)
+ return irq;
+
+ return -1;
+}
+
+void spider_init_IRQ(void)
+{
+ int node;
+ struct device_node *dn;
+ unsigned int *property;
+ long spiderpic;
+ int n;
+
+/* FIXME: detect multiple PICs as soon as the device tree has them */
+ for (node = 0; node < 1; node++) {
+ dn = of_find_node_by_path("/");
+ n = prom_n_addr_cells(dn);
+ property = (unsigned int *) get_property(dn,
+ "platform-spider-pic", NULL);
+
+ if (!property)
+ continue;
+ for (spiderpic = 0; n > 0; --n)
+ spiderpic = (spiderpic << 32) + *property++;
+ printk(KERN_DEBUG "SPIDER addr: %lx\n", spiderpic);
+ spider_pics[node] = __ioremap(spiderpic, 0x800, _PAGE_NO_CACHE);
+ for (n = 0; n < IIC_NUM_EXT; n++) {
+ int irq = n + IIC_EXT_OFFSET + node * IIC_NODE_STRIDE;
+ get_irq_desc(irq)->handler = &spider_pic;
+
+ /* do not mask any interrupts because of level */
+ out_be32(spider_pics[node] + TIR_MSK, 0x0);
+
+ /* disable edge detection clear */
+ /* out_be32(spider_pics[node] + TIR_EDC, 0x0); */
+
+ /* enable interrupt packets to be output */
+ out_be32(spider_pics[node] + TIR_PIEN,
+ in_be32(spider_pics[node] + TIR_PIEN) | 0x1);
+
+ /* Enable the interrupt detection enable bit. Do this last! */
+ out_be32(spider_pics[node] + TIR_DEN,
+ in_be32(spider_pics[node] +TIR_DEN) | 0x1);
+
+ }
+ }
+}
projects / linux-2.6-omap-h63xx.git / commitdiff