#ifndef __ASM_SH_CPU_SH5_ADDRSPACE_H
#define __ASM_SH_CPU_SH5_ADDRSPACE_H
+#define PHYS_PERIPHERAL_BLOCK 0x09000000
+#define PHYS_DMAC_BLOCK 0x0e000000
+#define PHYS_PCI_BLOCK 0x60000000
+#define PHYS_EMI_BLOCK 0xff000000
+
/* No segmentation.. */
#endif /* __ASM_SH_CPU_SH5_ADDRSPACE_H */
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * include/asm-sh64/cayman.h
- *
- * Cayman definitions
- *
- * Global defintions for the SH5 Cayman board
- *
- * Copyright (C) 2002 Stuart Menefy
- */
-
-
-/* Setup for the SMSC FDC37C935 / LAN91C100FD */
-#define SMSC_IRQ IRQ_IRL1
-
-/* Setup for PCI Bus 2, which transmits interrupts via the EPLD */
-#define PCI2_IRQ IRQ_IRL3
+++ /dev/null
-#ifndef __ASM_SH64_HARDWARE_H
-#define __ASM_SH64_HARDWARE_H
-
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * include/asm-sh64/hardware.h
- *
- * Copyright (C) 2002 Stuart Menefy
- * Copyright (C) 2003 Paul Mundt
- *
- * Defitions of the locations of registers in the physical address space.
- */
-
-#define PHYS_PERIPHERAL_BLOCK 0x09000000
-#define PHYS_DMAC_BLOCK 0x0e000000
-#define PHYS_PCI_BLOCK 0x60000000
-#define PHYS_EMI_BLOCK 0xff000000
-
-#endif /* __ASM_SH64_HARDWARE_H */
+++ /dev/null
-/*
- * linux/include/asm-shmedia/keyboard.h
- *
- * Copied from i386 version:
- * Created 3 Nov 1996 by Geert Uytterhoeven
- */
-
-/*
- * This file contains the i386 architecture specific keyboard definitions
- */
-
-#ifndef __ASM_SH64_KEYBOARD_H
-#define __ASM_SH64_KEYBOARD_H
-
-#ifdef __KERNEL__
-
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <asm/io.h>
-
-#ifdef CONFIG_SH_CAYMAN
-#define KEYBOARD_IRQ (START_EXT_IRQS + 2) /* SMSC SuperIO IRQ 1 */
-#endif
-#define DISABLE_KBD_DURING_INTERRUPTS 0
-
-extern int pckbd_setkeycode(unsigned int scancode, unsigned int keycode);
-extern int pckbd_getkeycode(unsigned int scancode);
-extern int pckbd_translate(unsigned char scancode, unsigned char *keycode,
- char raw_mode);
-extern char pckbd_unexpected_up(unsigned char keycode);
-extern void pckbd_leds(unsigned char leds);
-extern void pckbd_init_hw(void);
-
-#define kbd_setkeycode pckbd_setkeycode
-#define kbd_getkeycode pckbd_getkeycode
-#define kbd_translate pckbd_translate
-#define kbd_unexpected_up pckbd_unexpected_up
-#define kbd_leds pckbd_leds
-#define kbd_init_hw pckbd_init_hw
-
-/* resource allocation */
-#define kbd_request_region()
-#define kbd_request_irq(handler) request_irq(KEYBOARD_IRQ, handler, 0, \
- "keyboard", NULL)
-
-/* How to access the keyboard macros on this platform. */
-#define kbd_read_input() inb(KBD_DATA_REG)
-#define kbd_read_status() inb(KBD_STATUS_REG)
-#define kbd_write_output(val) outb(val, KBD_DATA_REG)
-#define kbd_write_command(val) outb(val, KBD_CNTL_REG)
-
-/* Some stoneage hardware needs delays after some operations. */
-#define kbd_pause() do { } while(0)
-
-/*
- * Machine specific bits for the PS/2 driver
- */
-
-#ifdef CONFIG_SH_CAYMAN
-#define AUX_IRQ (START_EXT_IRQS + 6) /* SMSC SuperIO IRQ12 */
-#endif
-
-#define aux_request_irq(hand, dev_id) \
- request_irq(AUX_IRQ, hand, IRQF_SHARED, "PS2 Mouse", dev_id)
-
-#define aux_free_irq(dev_id) free_irq(AUX_IRQ, dev_id)
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH64_KEYBOARD_H */
-
+++ /dev/null
-#ifndef __ASM_SH64_PCI_H
-#define __ASM_SH64_PCI_H
-
-#ifdef __KERNEL__
-
-#include <linux/dma-mapping.h>
-
-/* Can be used to override the logic in pci_scan_bus for skipping
- already-configured bus numbers - to be used for buggy BIOSes
- or architectures with incomplete PCI setup by the loader */
-
-#define pcibios_assign_all_busses() 1
-
-/*
- * These are currently the correct values for the STM overdrive board
- * We need some way of setting this on a board specific way, it will
- * not be the same on other boards I think
- */
-#if defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
-#define PCIBIOS_MIN_IO 0x2000
-#define PCIBIOS_MIN_MEM 0x40000000
-#endif
-
-extern void pcibios_set_master(struct pci_dev *dev);
-
-/*
- * Set penalize isa irq function
- */
-static inline void pcibios_penalize_isa_irq(int irq, int active)
-{
- /* We don't do dynamic PCI IRQ allocation */
-}
-
-/* Dynamic DMA mapping stuff.
- * SuperH has everything mapped statically like x86.
- */
-
-/* The PCI address space does equal the physical memory
- * address space. The networking and block device layers use
- * this boolean for bounce buffer decisions.
- */
-#define PCI_DMA_BUS_IS_PHYS (1)
-
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <asm/scatterlist.h>
-#include <linux/string.h>
-#include <asm/io.h>
-
-/* pci_unmap_{single,page} being a nop depends upon the
- * configuration.
- */
-#ifdef CONFIG_SH_PCIDMA_NONCOHERENT
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \
- dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \
- __u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME) \
- ((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \
- (((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME) \
- ((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
- (((PTR)->LEN_NAME) = (VAL))
-#else
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME) (0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME) (0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
-#endif
-
-#ifdef CONFIG_PCI
-static inline void pci_dma_burst_advice(struct pci_dev *pdev,
- enum pci_dma_burst_strategy *strat,
- unsigned long *strategy_parameter)
-{
- *strat = PCI_DMA_BURST_INFINITY;
- *strategy_parameter = ~0UL;
-}
-#endif
-
-/* Board-specific fixup routines. */
-extern void pcibios_fixup(void);
-extern void pcibios_fixup_irqs(void);
-
-#ifdef CONFIG_PCI_AUTO
-extern int pciauto_assign_resources(int busno, struct pci_channel *hose);
-#endif
-
-#endif /* __KERNEL__ */
-
-/* generic pci stuff */
-#include <asm-generic/pci.h>
-
-/* generic DMA-mapping stuff */
-#include <asm-generic/pci-dma-compat.h>
-
-#endif /* __ASM_SH64_PCI_H */
-
+++ /dev/null
-#ifndef __ASM_SH64_THREAD_INFO_H
-#define __ASM_SH64_THREAD_INFO_H
-
-/*
- * SuperH 5 version
- * Copyright (C) 2003 Paul Mundt
- */
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-#include <asm/registers.h>
-
-/*
- * low level task data that entry.S needs immediate access to
- * - this struct should fit entirely inside of one cache line
- * - this struct shares the supervisor stack pages
- * - if the contents of this structure are changed, the assembly constants must also be changed
- */
-struct thread_info {
- struct task_struct *task; /* main task structure */
- struct exec_domain *exec_domain; /* execution domain */
- unsigned long flags; /* low level flags */
- /* Put the 4 32-bit fields together to make asm offsetting easier. */
- int preempt_count; /* 0 => preemptable, <0 => BUG */
- __u16 cpu;
-
- mm_segment_t addr_limit;
- struct restart_block restart_block;
-
- __u8 supervisor_stack[0];
-};
-
-/*
- * macros/functions for gaining access to the thread information structure
- */
-#define INIT_THREAD_INFO(tsk) \
-{ \
- .task = &tsk, \
- .exec_domain = &default_exec_domain, \
- .flags = 0, \
- .cpu = 0, \
- .preempt_count = 1, \
- .addr_limit = KERNEL_DS, \
- .restart_block = { \
- .fn = do_no_restart_syscall, \
- }, \
-}
-
-#define init_thread_info (init_thread_union.thread_info)
-#define init_stack (init_thread_union.stack)
-
-/* how to get the thread information struct from C */
-static inline struct thread_info *current_thread_info(void)
-{
- struct thread_info *ti;
-
- __asm__ __volatile__ ("getcon " __KCR0 ", %0\n\t" : "=r" (ti));
-
- return ti;
-}
-
-/* thread information allocation */
-
-
-
-#define alloc_thread_info(ti) ((struct thread_info *) __get_free_pages(GFP_KERNEL,1))
-#define free_thread_info(ti) free_pages((unsigned long) (ti), 1)
-
-#endif /* __ASSEMBLY__ */
-
-#define THREAD_SIZE 8192
-
-#define PREEMPT_ACTIVE 0x10000000
-
-/* thread information flags */
-#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
-#define TIF_SIGPENDING 2 /* signal pending */
-#define TIF_NEED_RESCHED 3 /* rescheduling necessary */
-#define TIF_MEMDIE 4
-#define TIF_RESTORE_SIGMASK 5 /* Restore signal mask in do_signal */
-
-#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
-#define _TIF_MEMDIE (1 << TIF_MEMDIE)
-#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK)
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASM_SH64_THREAD_INFO_H */
projects / linux-2.6-omap-h63xx.git / commitdiff