EXPORT_SYMBOL(cpu_online_map);
-/* cpus reported in the hwrpb */
-static unsigned long hwrpb_cpu_present_mask __initdata = 0;
-
int smp_num_probed; /* Internal processor count */
int smp_num_cpus = 1; /* Number that came online. */
if ((cpu->flags & 0x1cc) == 0x1cc) {
smp_num_probed++;
/* Assume here that "whami" == index */
- hwrpb_cpu_present_mask |= (1UL << i);
+ cpu_set(i, cpu_possible_map);
cpu->pal_revision = boot_cpu_palrev;
}
}
} else {
smp_num_probed = 1;
- hwrpb_cpu_present_mask = (1UL << boot_cpuid);
+ cpu_set(boot_cpuid, cpu_possible_map);
}
cpu_present_mask = cpumask_of_cpu(boot_cpuid);
printk(KERN_INFO "SMP: %d CPUs probed -- cpu_present_mask = %lx\n",
- smp_num_probed, hwrpb_cpu_present_mask);
+ smp_num_probed, cpu_possible_map.bits[0]);
}
/*
void __init
smp_prepare_cpus(unsigned int max_cpus)
{
- int cpu_count, i;
-
/* Take care of some initial bookkeeping. */
memset(ipi_data, 0, sizeof(ipi_data));
printk(KERN_INFO "SMP starting up secondaries.\n");
- cpu_count = 1;
- for (i = 0; (i < NR_CPUS) && (cpu_count < max_cpus); i++) {
- if (i == boot_cpuid)
- continue;
-
- if (((hwrpb_cpu_present_mask >> i) & 1) == 0)
- continue;
-
- cpu_set(i, cpu_possible_map);
- cpu_count++;
- }
-
- smp_num_cpus = cpu_count;
+ smp_num_cpus = smp_num_probed;
}
void __devinit
default y
help
The ARM series is a line of low-power-consumption RISC chip designs
- licensed by ARM ltd and targeted at embedded applications and
+ licensed by ARM Ltd and targeted at embedded applications and
handhelds such as the Compaq IPAQ. ARM-based PCs are no longer
- manufactured, but legacy ARM-based PC hardware remains popular in
+ manufactured, but legacy ARM-based PC hardware remains popular in
Europe. There is an ARM Linux project with a web page at
<http://www.arm.linux.org.uk/>.
config FIQ
bool
+config ARCH_MTD_XIP
+ bool
+
source "init/Kconfig"
menu "System Type"
bool "Cirrus-CL-PS7500FE"
select TIMER_ACORN
select ISA
+ help
+ Support for the Cirrus Logic PS7500FE system-on-a-chip.
config ARCH_CLPS711X
bool "CLPS711x/EP721x-based"
+ help
+ Support for Cirrus Logic 711x/721x based boards.
config ARCH_CO285
bool "Co-EBSA285"
select FOOTBRIDGE
select FOOTBRIDGE_ADDIN
+ help
+ Support for Intel's EBSA285 companion chip.
config ARCH_EBSA110
bool "EBSA-110"
select ISA
help
This is an evaluation board for the StrongARM processor available
- from Digital. It has limited hardware on-board, including an onboard
+ from Digital. It has limited hardware on-board, including an
Ethernet interface, two PCMCIA sockets, two serial ports and a
parallel port.
config ARCH_FOOTBRIDGE
bool "FootBridge"
select FOOTBRIDGE
+ help
+ Support for systems based on the DC21285 companion chip
+ ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
config ARCH_INTEGRATOR
bool "Integrator"
select ARM_AMBA
select ICST525
+ help
+ Support for ARM's Integrator platform.
config ARCH_IOP3XX
bool "IOP3xx-based"
select PCI
+ help
+ Support for Intel's IOP3XX (XScale) family of processors.
config ARCH_IXP4XX
bool "IXP4xx-based"
select DMABOUNCE
select PCI
+ help
+ Support for Intel's IXP4XX (XScale) family of processors.
config ARCH_IXP2000
bool "IXP2400/2800-based"
select PCI
+ help
+ Support for Intel's IXP2400/2800 (XScale) family of processors.
config ARCH_L7200
bool "LinkUp-L7200"
config ARCH_PXA
bool "PXA2xx-based"
+ select ARCH_MTD_XIP
+ help
+ Support for Intel's PXA2XX processor line.
config ARCH_RPC
bool "RiscPC"
bool "SA1100-based"
select ISA
select ARCH_DISCONTIGMEM_ENABLE
+ select ARCH_MTD_XIP
+ help
+ Support for StrongARM 11x0 based boards.
config ARCH_S3C2410
bool "Samsung S3C2410"
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
- the Samsung SMDK2410 development board (and derviatives).
+ the Samsung SMDK2410 development board (and derivatives).
config ARCH_SHARK
bool "Shark"
select ISA
select ISA_DMA
select PCI
+ help
+ Support for the StrongARM based Digital DNARD machine, also known
+ as "Shark" (<http://www.shark-linux.de/shark.html>).
config ARCH_LH7A40X
bool "Sharp LH7A40X"
config ARCH_OMAP
bool "TI OMAP"
+ help
+ Support for TI's OMAP platform (OMAP1 and OMAP2).
config ARCH_VERSATILE
bool "Versatile"
config ARCH_IMX
bool "IMX"
+ help
+ Support for Motorola's i.MX family of processors (MX1, MXL).
config ARCH_H720X
bool "Hynix-HMS720x-based"
config ARCH_AT91RM9200
bool "AT91RM9200"
help
- Say Y here if you intend to run this kernel on an AT91RM9200-based
- board.
+ Say Y here if you intend to run this kernel on an Atmel
+ AT91RM9200-based board.
endchoice
To use this you need GCC version 4.0.0 or later.
config OABI_COMPAT
- bool "Allow old ABI binaries to run with this kernel"
- depends on AEABI
+ bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)"
+ depends on AEABI && EXPERIMENTAL
default y
help
This option preserves the old syscall interface along with the
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware"
+CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0"
# CONFIG_XIP_KERNEL is not set
#
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware"
+CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0"
# CONFIG_XIP_KERNEL is not set
#
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware"
+CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0"
# CONFIG_XIP_KERNEL is not set
#
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware ixdp2x01_clock=50000000"
+CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0"
# CONFIG_XIP_KERNEL is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc1
-# Sun Nov 13 17:41:24 2005
+# Linux kernel version: 2.6.16-rc2
+# Mon Feb 6 11:17:23 2006
#
CONFIG_ARM=y
CONFIG_MMU=y
-CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_AT91RM9200 is not set
#
# S3C24XX Implementations
# Bus support
#
CONFIG_ISA=y
-CONFIG_ISA_DMA_API=y
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PREEMPT is not set
# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# Power management options
#
CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+# CONFIG_PM_DEBUG is not set
CONFIG_APM=y
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
#
# Memory Technology Devices (MTD)
#
#
# Block devices
#
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_SMC91X is not set
CONFIG_DM9000=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
-# CONFIG_ESPSERIAL is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
#
# TPM devices
#
+# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Hardware Monitoring support
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_INOTIFY=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_WAITQ is not set
CALL(sys_mq_getsetattr)
/* 280 */ CALL(sys_waitid)
CALL(sys_socket)
- CALL(sys_bind)
- CALL(sys_connect)
+ CALL(ABI(sys_bind, sys_oabi_bind))
+ CALL(ABI(sys_connect, sys_oabi_connect))
CALL(sys_listen)
/* 285 */ CALL(sys_accept)
CALL(sys_getsockname)
CALL(sys_getpeername)
CALL(sys_socketpair)
CALL(sys_send)
-/* 290 */ CALL(sys_sendto)
+/* 290 */ CALL(ABI(sys_sendto, sys_oabi_sendto))
CALL(sys_recv)
CALL(sys_recvfrom)
CALL(sys_shutdown)
CALL(sys_setsockopt)
/* 295 */ CALL(sys_getsockopt)
- CALL(sys_sendmsg)
+ CALL(ABI(sys_sendmsg, sys_oabi_sendmsg))
CALL(sys_recvmsg)
CALL(ABI(sys_semop, sys_oabi_semop))
CALL(sys_semget)
@ from the exception stack
#if __LINUX_ARM_ARCH__ < 6 && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
+#ifndef CONFIG_MMU
+#warning "NPTL on non MMU needs fixing"
+#else
@ make sure our user space atomic helper is aborted
cmp r2, #TASK_SIZE
bichs r3, r3, #PSR_Z_BIT
+#endif
#endif
@
* The C flag is also set if *ptr was changed to allow for assembly
* optimization in the calling code.
*
- * Note: this routine already includes memory barriers as needed.
+ * Notes:
+ *
+ * - This routine already includes memory barriers as needed.
+ *
+ * - A failure might be transient, i.e. it is possible, although unlikely,
+ * that "failure" be returned even if *ptr == oldval.
*
* For example, a user space atomic_add implementation could look like this:
*
* exception happening just after the str instruction which would
* clear the Z flag although the exchange was done.
*/
+#ifdef CONFIG_MMU
teq ip, ip @ set Z flag
ldr ip, [r2] @ load current val
add r3, r2, #1 @ prepare store ptr
teqeq ip, r0 @ compare with oldval if still allowed
streq r1, [r3, #-1]! @ store newval if still allowed
subs r0, r2, r3 @ if r2 == r3 the str occured
+#else
+#warning "NPTL on non MMU needs fixing"
+ mov r0, #-1
+ adds r0, r0, #0
+#endif
mov pc, lr
#else
* struct sembuf loses its padding with EABI. Since arrays of them are
* used they have to be copyed to remove the padding. Compatibility wrappers
* provided below.
+ *
+ * sys_bind:
+ * sys_connect:
+ * sys_sendmsg:
+ * sys_sendto:
+ *
+ * struct sockaddr_un loses its padding with EABI. Since the size of the
+ * structure is used as a validation test in unix_mkname(), we need to
+ * change the length argument to 110 whenever it is 112. Compatibility
+ * wrappers provided below.
*/
#include <linux/syscalls.h>
#include <linux/fcntl.h>
#include <linux/eventpoll.h>
#include <linux/sem.h>
+#include <linux/socket.h>
#include <asm/ipc.h>
#include <asm/uaccess.h>
return sys_ipc(call, first, second, third, ptr, fifth);
}
}
+
+asmlinkage long sys_oabi_bind(int fd, struct sockaddr __user *addr, int addrlen)
+{
+ sa_family_t sa_family;
+ if (addrlen == 112 &&
+ get_user(sa_family, &addr->sa_family) == 0 &&
+ sa_family == AF_UNIX)
+ addrlen = 110;
+ return sys_bind(fd, addr, addrlen);
+}
+
+asmlinkage long sys_oabi_connect(int fd, struct sockaddr __user *addr, int addrlen)
+{
+ sa_family_t sa_family;
+ if (addrlen == 112 &&
+ get_user(sa_family, &addr->sa_family) == 0 &&
+ sa_family == AF_UNIX)
+ addrlen = 110;
+ return sys_connect(fd, addr, addrlen);
+}
+
+asmlinkage long sys_oabi_sendto(int fd, void __user *buff,
+ size_t len, unsigned flags,
+ struct sockaddr __user *addr,
+ int addrlen)
+{
+ sa_family_t sa_family;
+ if (addrlen == 112 &&
+ get_user(sa_family, &addr->sa_family) == 0 &&
+ sa_family == AF_UNIX)
+ addrlen = 110;
+ return sys_sendto(fd, buff, len, flags, addr, addrlen);
+}
+
+asmlinkage long sys_oabi_sendmsg(int fd, struct msghdr __user *msg, unsigned flags)
+{
+ struct sockaddr __user *addr;
+ int msg_namelen;
+ sa_family_t sa_family;
+ if (msg &&
+ get_user(msg_namelen, &msg->msg_namelen) == 0 &&
+ msg_namelen == 112 &&
+ get_user(addr, &msg->msg_name) == 0 &&
+ get_user(sa_family, &addr->sa_family) == 0 &&
+ sa_family == AF_UNIX)
+ {
+ /*
+ * HACK ALERT: there is a limit to how much backward bending
+ * we should do for what is actually a transitional
+ * compatibility layer. This already has known flaws with
+ * a few ioctls that we don't intend to fix. Therefore
+ * consider this blatent hack as another one... and take care
+ * to run for cover. In most cases it will "just work fine".
+ * If it doesn't, well, tough.
+ */
+ put_user(110, &msg->msg_namelen);
+ }
+ return sys_sendmsg(fd, msg, flags);
+}
+
config ARCH_CLEP7312
bool "CLEP7312"
+ help
+ Boards based on the Cirrus Logic 7212/7312 chips.
config ARCH_EDB7211
bool "EDB7211"
#include <asm/mach/arch.h>
#include <linux/interrupt.h>
#include "generic.h"
-#include <asm/serial.h>
static struct resource cs89x0_resources[] = {
[0] = {
{
ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00100000);
ixp2000_pci_preinit();
+ pcibios_setup("firmware");
}
static inline int enp2611_pci_valid_device(struct pci_bus *bus,
{
ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00100000);
ixp2000_pci_preinit();
+ pcibios_setup("firmware");
}
int ixdp2400_pci_setup(int nr, struct pci_sys_data *sys)
{
ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00000000);
ixp2000_pci_preinit();
+ pcibios_setup("firmware");
}
#define DEVPIN(dev, pin) ((pin) | ((dev) << 3))
int __init ixdp2x01_pci_init(void)
{
- pci_common_init(&ixdp2x01_pci);
+ if (machine_is_ixdp2401() || machine_is_ixdp2801())
+ pci_common_init(&ixdp2x01_pci);
+
return 0;
}
static void __init omap_generic_init_irq(void)
{
+ omap1_init_common_hw();
omap_init_irq();
}
static void __init omap_generic_map_io(void)
{
- omap_map_common_io();
+ omap1_map_common_io();
}
MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
static void __init h2_init_irq(void)
{
+ omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
h2_init_smc91x();
static void __init h2_map_io(void)
{
- omap_map_common_io();
+ omap1_map_common_io();
}
MACHINE_START(OMAP_H2, "TI-H2")
void h3_init_irq(void)
{
+ omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
h3_init_smc91x();
static void __init h3_map_io(void)
{
- omap_map_common_io();
+ omap1_map_common_io();
}
MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
void innovator_init_irq(void)
{
+ omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
#ifdef CONFIG_ARCH_OMAP15XX
static void __init innovator_map_io(void)
{
- omap_map_common_io();
+ omap1_map_common_io();
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap1510()) {
static void __init netstar_init_irq(void)
{
+ omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
}
static void __init netstar_map_io(void)
{
- omap_map_common_io();
+ omap1_map_common_io();
}
#define MACHINE_PANICED 1
static void __init osk_init_irq(void)
{
+ omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
osk_init_smc91x();
static void __init osk_map_io(void)
{
- omap_map_common_io();
+ omap1_map_common_io();
}
MACHINE_START(OMAP_OSK, "TI-OSK")
static void __init omap_generic_init_irq(void)
{
+ omap1_init_common_hw();
omap_init_irq();
}
static void __init omap_generic_map_io(void)
{
- omap_map_common_io();
+ omap1_map_common_io();
}
MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
void omap_perseus2_init_irq(void)
{
+ omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
perseus2_init_smc91x();
static void __init omap_perseus2_map_io(void)
{
- omap_map_common_io();
+ omap1_map_common_io();
iotable_init(omap_perseus2_io_desc,
ARRAY_SIZE(omap_perseus2_io_desc));
static void __init voiceblue_init_irq(void)
{
+ omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
}
static void __init voiceblue_map_io(void)
{
- omap_map_common_io();
+ omap1_map_common_io();
}
#define MACHINE_PANICED 1
#include <linux/kernel.h>
#include <linux/init.h>
+#include <asm/tlb.h>
#include <asm/mach/map.h>
#include <asm/io.h>
#include <asm/arch/mux.h>
};
#endif
-static int initialized = 0;
-
-static void __init _omap_map_io(void)
+/*
+ * Maps common IO regions for omap1. This should only get called from
+ * board specific init.
+ */
+void __init omap1_map_common_io(void)
{
- initialized = 1;
-
- /* We have to initialize the IO space mapping before we can run
- * cpu_is_omapxxx() macros. */
iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc));
+
+ /* Normally devicemaps_init() would flush caches and tlb after
+ * mdesc->map_io(), but we must also do it here because of the CPU
+ * revision check below.
+ */
+ local_flush_tlb_all();
+ flush_cache_all();
+
+ /* We want to check CPU revision early for cpu_is_omapxxxx() macros.
+ * IO space mapping must be initialized before we can do that.
+ */
omap_check_revision();
#ifdef CONFIG_ARCH_OMAP730
#endif
omap_sram_init();
+}
+/*
+ * Common low-level hardware init for omap1. This should only get called from
+ * board specific init.
+ */
+void __init omap1_init_common_hw()
+{
/* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort
* on a Posted Write in the TIPB Bridge".
*/
/* Must init clocks early to assure that timer interrupt works
*/
omap1_clk_init();
-}
-/*
- * This should only get called from board specific init
- */
-void __init omap_map_common_io(void)
-{
- if (!initialized) {
- _omap_map_io();
- omap1_mux_init();
- }
+ omap1_mux_init();
}
static void __init omap_generic_init_irq(void)
{
+ omap2_init_common_hw();
omap_init_irq();
}
static void __init omap_generic_map_io(void)
{
- omap_map_common_io();
+ omap2_map_common_io();
}
MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
static void __init omap_h4_init_irq(void)
{
+ omap2_init_common_hw();
omap_init_irq();
omap_gpio_init();
h4_init_smc91x();
static void __init omap_h4_map_io(void)
{
- omap_map_common_io();
+ omap2_map_common_io();
}
MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
static void realview_oscvco_set(struct clk *clk, struct icst307_vco vco)
{
void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET;
- void __iomem *sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC1_OFFSET;
+ void __iomem *sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET;
u32 val;
val = readl(sys_osc) & ~0x7ffff;
#include <linux/mutex.h>
#include <asm/hardware.h>
-#include <asm/atomic.h>
#include <asm/irq.h>
#include <asm/io.h>
void inline s3c24xx_clk_enable(unsigned int clocks, unsigned int enable)
{
unsigned long clkcon;
- unsigned long flags;
-
- local_irq_save(flags);
clkcon = __raw_readl(S3C2410_CLKCON);
- clkcon &= ~clocks;
if (enable)
clkcon |= clocks;
+ else
+ clkcon &= ~clocks;
/* ensure none of the special function bits set */
clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER);
__raw_writel(clkcon, S3C2410_CLKCON);
-
- local_irq_restore(flags);
}
/* enable and disable calls for use with the clk struct */
int clk_enable(struct clk *clk)
{
- if (IS_ERR(clk))
+ if (IS_ERR(clk) || clk == NULL)
return -EINVAL;
- return (clk->enable)(clk, 1);
+ clk_enable(clk->parent);
+
+ mutex_lock(&clocks_mutex);
+
+ if ((clk->usage++) == 0)
+ (clk->enable)(clk, 1);
+
+ mutex_unlock(&clocks_mutex);
+ return 0;
}
void clk_disable(struct clk *clk)
{
- if (!IS_ERR(clk))
+ if (IS_ERR(clk) || clk == NULL)
+ return;
+
+ mutex_lock(&clocks_mutex);
+
+ if ((--clk->usage) == 0)
(clk->enable)(clk, 0);
+
+ mutex_unlock(&clocks_mutex);
+ clk_disable(clk->parent);
}
if (clk->enable == NULL)
clk->enable = clk_null_enable;
+ /* if this is a standard clock, set the usage state */
+
+ if (clk->ctrlbit) {
+ unsigned long clkcon = __raw_readl(S3C2410_CLKCON);
+
+ clk->usage = (clkcon & clk->ctrlbit) ? 1 : 0;
+ }
+
/* add to the list of available clocks */
mutex_lock(&clocks_mutex);
* the LCD clock if it is not needed.
*/
+ mutex_lock(&clocks_mutex);
+
s3c24xx_clk_enable(S3C2410_CLKCON_NAND, 0);
s3c24xx_clk_enable(S3C2410_CLKCON_USBH, 0);
s3c24xx_clk_enable(S3C2410_CLKCON_USBD, 0);
s3c24xx_clk_enable(S3C2410_CLKCON_IIC, 0);
s3c24xx_clk_enable(S3C2410_CLKCON_SPI, 0);
+ mutex_unlock(&clocks_mutex);
+
/* assume uart clocks are correctly setup */
/* register our clocks */
struct clk *parent;
const char *name;
int id;
+ int usage;
unsigned long rate;
unsigned long ctrlbit;
int (*enable)(struct clk *, int enable);
},
[1] = {
.start = IRQ_TC,
+ .end = IRQ_TC,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = IRQ_ADC,
.end = IRQ_ADC,
.flags = IORESOURCE_IRQ,
}
#include <linux/init.h>
#include <asm/mach/map.h>
+#include <asm/tlb.h>
#include <asm/io.h>
#include <asm/cacheflush.h>
omap_sram_io_desc[0].pfn, omap_sram_io_desc[0].virtual,
omap_sram_io_desc[0].length);
+ /*
+ * Normally devicemaps_init() would flush caches and tlb after
+ * mdesc->map_io(), but since we're called from map_io(), we
+ * must do it here.
+ */
+ local_flush_tlb_all();
+ flush_cache_all();
+
/*
* Looks like we need to preserve some bootloader code at the
* beginning of SRAM for jumping to flash for reboot to work...
uart.type = PORT_UNKNOWN;
uart.uartclk = 18432000;
uart.irq = COBALT_SERIAL_IRQ;
- uart.flags = STD_COM_FLAGS;
+ uart.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
uart.iobase = 0xc800000;
uart.iotype = UPIO_PORT;
* for more details.
*
* Copyright (C) 1994 - 1999, 2000 by Ralf Baechle and others.
+ * Copyright (C) 2005, 2006 by Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
* Copyright (C) 2004 Thiemo Seufer
*/
}
}
-extern int do_signal(sigset_t *oldset, struct pt_regs *regs);
-extern int do_signal32(sigset_t *oldset, struct pt_regs *regs);
+extern void do_signal(struct pt_regs *regs);
+extern void do_signal32(struct pt_regs *regs);
/*
* Native o32 and N64 ABI without DSP ASE
sys sys_inotify_init 0
sys sys_inotify_add_watch 3 /* 4285 */
sys sys_inotify_rm_watch 2
+ sys sys_migrate_pages 4
+ sys sys_openat 4
+ sys sys_mkdirat 3
+ sys sys_mknodat 4 /* 4290 */
+ sys sys_fchownat 5
+ sys sys_futimesat 3
+ sys sys_newfstatat 4
+ sys sys_unlinkat 3
+ sys sys_renameat 4 /* 4295 */
+ sys sys_linkat 4
+ sys sys_symlinkat 3
+ sys sys_readlinkat 4
+ sys sys_fchmodat 3
+ sys sys_faccessat 3 /* 4300 */
+ sys sys_pselect6 6
+ sys sys_ppoll 5
+ sys sys_unshare 1
.endm
/* We pre-compute the number of _instruction_ bytes needed to
PTR sys_inotify_init
PTR sys_inotify_add_watch
PTR sys_inotify_rm_watch /* 5245 */
+ PTR sys_migrate_pages
+ PTR sys_openat
+ PTR sys_mkdirat
+ PTR sys_mknodat
+ PTR sys_fchownat /* 5250 */
+ PTR sys_futimesat
+ PTR sys_newfstatat
+ PTR sys_unlinkat
+ PTR sys_renameat
+ PTR sys_linkat /* 5255 */
+ PTR sys_symlinkat
+ PTR sys_readlinkat
+ PTR sys_fchmodat
+ PTR sys_faccessat
+ PTR sys_pselect6 /* 5260 */
+ PTR sys_ppoll
+ PTR sys_unshare
PTR sys_inotify_init
PTR sys_inotify_add_watch
PTR sys_inotify_rm_watch
+ PTR sys_migrate_pages /* 6250 */
+ PTR sys_openat
+ PTR sys_mkdirat
+ PTR sys_mknodat
+ PTR sys_fchownat
+ PTR sys_futimesat /* 6255 */
+ PTR sys_newfstatat
+ PTR sys_unlinkat
+ PTR sys_renameat
+ PTR sys_linkat
+ PTR sys_symlinkat /* 6260 */
+ PTR sys_readlinkat
+ PTR sys_fchmodat
+ PTR sys_faccessat
+ PTR sys_pselect6
+ PTR sys_ppoll /* 6265 */
+ PTR sys_unshare
PTR sys_inotify_init
PTR sys_inotify_add_watch /* 4285 */
PTR sys_inotify_rm_watch
+ PTR sys_migrate_pages
+ PTR compat_sys_openat
+ PTR sys_mkdirat
+ PTR sys_mknodat /* 4290 */
+ PTR sys_fchownat
+ PTR compat_sys_futimesat
+ PTR compat_sys_newfstatat
+ PTR sys_unlinkat
+ PTR sys_renameat /* 4295 */
+ PTR sys_linkat
+ PTR sys_symlinkat
+ PTR sys_readlinkat
+ PTR sys_fchmodat
+ PTR sys_faccessat /* 4300 */
+ PTR sys_pselect6
+ PTR sys_ppoll
+ PTR sys_unshare
.size sys_call_table,.-sys_call_table
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-int do_signal(sigset_t *oldset, struct pt_regs *regs);
-
/*
* Atomically swap in the new signal mask, and wait for a signal.
*/
__attribute_used__ noinline static int
_sys_sigsuspend(nabi_no_regargs struct pt_regs regs)
{
- sigset_t saveset, newset;
+ sigset_t newset;
sigset_t __user *uset;
uset = (sigset_t __user *) regs.regs[4];
sigdelsetmask(&newset, ~_BLOCKABLE);
spin_lock_irq(¤t->sighand->siglock);
- saveset = current->blocked;
+ current->saved_sigmask = current->blocked;
current->blocked = newset;
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
- regs.regs[2] = EINTR;
- regs.regs[7] = 1;
- while (1) {
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- if (do_signal(&saveset, ®s))
- return -EINTR;
- }
+ current->state = TASK_INTERRUPTIBLE;
+ schedule();
+ set_thread_flag(TIF_RESTORE_SIGMASK);
+ return -ERESTARTNOHAND;
}
#endif
__attribute_used__ noinline static int
_sys_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
{
- sigset_t saveset, newset;
+ sigset_t newset;
sigset_t __user *unewset;
size_t sigsetsize;
sigdelsetmask(&newset, ~_BLOCKABLE);
spin_lock_irq(¤t->sighand->siglock);
- saveset = current->blocked;
+ current->saved_sigmask = current->blocked;
current->blocked = newset;
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
- regs.regs[2] = EINTR;
- regs.regs[7] = 1;
- while (1) {
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- if (do_signal(&saveset, ®s))
- return -EINTR;
- }
+ current->state = TASK_INTERRUPTIBLE;
+ schedule();
+ set_thread_flag(TIF_RESTORE_SIGMASK);
+ return -ERESTARTNOHAND;
}
#ifdef CONFIG_TRAD_SIGNALS
current->comm, current->pid,
frame, regs->cp0_epc, frame->regs[31]);
#endif
- return 1;
+ return 0;
give_sigsegv:
force_sigsegv(signr, current);
- return 0;
+ return -EFAULT;
}
#endif
current->comm, current->pid,
frame, regs->cp0_epc, regs->regs[31]);
#endif
- return 1;
+ return 0;
give_sigsegv:
force_sigsegv(signr, current);
- return 0;
+ return -EFAULT;
}
static inline int handle_signal(unsigned long sig, siginfo_t *info,
regs->regs[2] = EINTR;
break;
case ERESTARTSYS:
- if(!(ka->sa.sa_flags & SA_RESTART)) {
+ if (!(ka->sa.sa_flags & SA_RESTART)) {
regs->regs[2] = EINTR;
break;
}
return ret;
}
-int do_signal(sigset_t *oldset, struct pt_regs *regs)
+void do_signal(struct pt_regs *regs)
{
struct k_sigaction ka;
+ sigset_t *oldset;
siginfo_t info;
int signr;
* if so.
*/
if (!user_mode(regs))
- return 1;
+ return;
if (try_to_freeze())
goto no_signal;
- if (!oldset)
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ oldset = ¤t->saved_sigmask;
+ else
oldset = ¤t->blocked;
+
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
- if (signr > 0)
- return handle_signal(signr, &info, &ka, oldset, regs);
+ if (signr > 0) {
+ /* Whee! Actually deliver the signal. */
+ if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
+ /*
+ * A signal was successfully delivered; the saved
+ * sigmask will have been stored in the signal frame,
+ * and will be restored by sigreturn, so we can simply
+ * clear the TIF_RESTORE_SIGMASK flag.
+ */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ }
+ }
no_signal:
/*
regs->cp0_epc -= 4;
}
}
- return 0;
+
+ /*
+ * If there's no signal to deliver, we just put the saved sigmask
+ * back
+ */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
+ }
}
/*
* notification of userspace execution resumption
- * - triggered by current->work.notify_resume
+ * - triggered by the TIF_WORK_MASK flags
*/
-asmlinkage void do_notify_resume(struct pt_regs *regs, sigset_t *oldset,
+asmlinkage void do_notify_resume(struct pt_regs *regs, void *unused,
__u32 thread_info_flags)
{
/* deal with pending signal delivery */
- if (thread_info_flags & _TIF_SIGPENDING) {
- current->thread.abi->do_signal(oldset, regs);
- }
+ if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
+ current->thread.abi->do_signal(regs);
}
current->comm, current->pid,
frame, regs->cp0_epc, frame->sf_code);
#endif
- return 1;
+ return 0;
give_sigsegv:
force_sigsegv(signr, current);
- return 0;
+ return -EFAULT;
}
int setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs,
current->comm, current->pid,
frame, regs->cp0_epc, frame->rs_code);
#endif
- return 1;
+ return 0;
give_sigsegv:
force_sigsegv(signr, current);
- return 0;
+ return -EFAULT;
}
static inline int handle_signal(unsigned long sig, siginfo_t *info,
current->comm, current->pid,
frame, regs->cp0_epc, regs->regs[31]);
#endif
- return 1;
+ return 0;
give_sigsegv:
force_sigsegv(signr, current);
- return 0;
+ return -EFAULT;
}
int error;
char * filename;
- filename = getname((char *) (long)regs.regs[4]);
+ filename = getname((char __user *) (long)regs.regs[4]);
error = PTR_ERR(filename);
if (IS_ERR(filename))
goto out;
- error = do_execve(filename, (char **) (long)regs.regs[5],
- (char **) (long)regs.regs[6], ®s);
+ error = do_execve(filename, (char __user *__user *) (long)regs.regs[5],
+ (char __user *__user *) (long)regs.regs[6], ®s);
putname(filename);
out:
/*
* Compacrapability ...
*/
-asmlinkage int sys_uname(struct old_utsname * name)
+asmlinkage int sys_uname(struct old_utsname __user * name)
{
if (name && !copy_to_user(name, &system_utsname, sizeof (*name)))
return 0;
/*
* Compacrapability ...
*/
-asmlinkage int sys_olduname(struct oldold_utsname * name)
+asmlinkage int sys_olduname(struct oldold_utsname __user * name)
{
int error;
asmlinkage int _sys_sysmips(int cmd, long arg1, int arg2, int arg3)
{
int tmp, len;
- char *name;
+ char __user *name;
switch(cmd) {
case SETNAME: {
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- name = (char *) arg1;
+ name = (char __user *) arg1;
len = strncpy_from_user(nodename, name, __NEW_UTS_LEN);
if (len < 0)
* This is really horribly ugly.
*/
asmlinkage int sys_ipc (uint call, int first, int second,
- unsigned long third, void *ptr, long fifth)
+ unsigned long third, void __user *ptr, long fifth)
{
int version, ret;
switch (call) {
case SEMOP:
- return sys_semtimedop (first, (struct sembuf *)ptr, second,
- NULL);
+ return sys_semtimedop (first, (struct sembuf __user *)ptr,
+ second, NULL);
case SEMTIMEDOP:
- return sys_semtimedop (first, (struct sembuf *)ptr, second,
- (const struct timespec __user *)fifth);
+ return sys_semtimedop (first, (struct sembuf __user *)ptr,
+ second,
+ (const struct timespec __user *)fifth);
case SEMGET:
return sys_semget (first, second, third);
case SEMCTL: {
union semun fourth;
if (!ptr)
return -EINVAL;
- if (get_user(fourth.__pad, (void **) ptr))
+ if (get_user(fourth.__pad, (void *__user *) ptr))
return -EFAULT;
return sys_semctl (first, second, third, fourth);
}
case MSGSND:
- return sys_msgsnd (first, (struct msgbuf *) ptr,
+ return sys_msgsnd (first, (struct msgbuf __user *) ptr,
second, third);
case MSGRCV:
switch (version) {
return -EINVAL;
if (copy_from_user(&tmp,
- (struct ipc_kludge *) ptr,
+ (struct ipc_kludge __user *) ptr,
sizeof (tmp)))
return -EFAULT;
return sys_msgrcv (first, tmp.msgp, second,
}
default:
return sys_msgrcv (first,
- (struct msgbuf *) ptr,
+ (struct msgbuf __user *) ptr,
second, fifth, third);
}
case MSGGET:
return sys_msgget ((key_t) first, second);
case MSGCTL:
- return sys_msgctl (first, second, (struct msqid_ds *) ptr);
+ return sys_msgctl (first, second,
+ (struct msqid_ds __user *) ptr);
case SHMAT:
switch (version) {
default: {
ulong raddr;
- ret = do_shmat (first, (char *) ptr, second, &raddr);
+ ret = do_shmat (first, (char __user *) ptr, second,
+ &raddr);
if (ret)
return ret;
- return put_user (raddr, (ulong *) third);
+ return put_user (raddr, (ulong __user *) third);
}
case 1: /* iBCS2 emulator entry point */
if (!segment_eq(get_fs(), get_ds()))
return -EINVAL;
- return do_shmat (first, (char *) ptr, second, (ulong *) third);
+ return do_shmat (first, (char __user *) ptr, second,
+ (ulong *) third);
}
case SHMDT:
- return sys_shmdt ((char *)ptr);
+ return sys_shmdt ((char __user *)ptr);
case SHMGET:
return sys_shmget (first, second, third);
case SHMCTL:
return sys_shmctl (first, second,
- (struct shmid_ds *) ptr);
+ (struct shmid_ds __user *) ptr);
default:
return -ENOSYS;
}
memset(&s, 0, sizeof(s));
- s.flags = STD_COM_FLAGS;
- s.iotype = SERIAL_IO_MEM;
+ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
+ s.iotype = UPIO_MEM;
if (mips_machtype == MACH_LASAT_100) {
s.uartclk = LASAT_BASE_BAUD_100 * 16;
#endif
s.irq = ATLASINT_UART;
s.uartclk = ATLAS_BASE_BAUD * 16;
- s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
- s.iotype = SERIAL_IO_PORT;
+ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ;
+ s.iotype = UPIO_PORT;
s.regshift = 3;
if (early_serial_setup(&s) != 0) {
#endif
s.irq = MIPSCPU_INT_BASE + MIPSCPU_INT_UART0;
s.uartclk = SEAD_BASE_BAUD * 16;
- s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
- s.iotype = 0;
+ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ;
+ s.iotype = UPIO_PORT;
s.regshift = 3;
if (early_serial_setup(&s) != 0) {
but poll for now */
s.irq = 0;
s.uartclk = BASE_BAUD * 16;
- s.flags = ASYNC_BOOT_AUTOCONF | UPF_SKIP_TEST;
- s.iotype = SERIAL_IO_PORT | ASYNC_SKIP_TEST;
+ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
+ s.iotype = UPIO_PORT;
s.regshift = 0;
s.timeout = 4;
up.uartclk = JAGUAR_ATX_UART_CLK;
up.regshift = 2;
up.iotype = UPIO_MEM;
- up.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ up.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
up.line = 0;
if (early_serial_setup(&up))
[0] = {
.port = {
.type = PORT_IP3106,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.membase = (void __iomem *)PNX8550_UART_PORT0,
.mapbase = PNX8550_UART_PORT0,
.irq = PNX8550_UART_INT(0),
.uartclk = 3692300,
.fifosize = 16,
.ops = &ip3106_pops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 0,
},
},
[1] = {
.port = {
.type = PORT_IP3106,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.membase = (void __iomem *)PNX8550_UART_PORT1,
.mapbase = PNX8550_UART_PORT1,
.irq = PNX8550_UART_INT(1),
.uartclk = 3692300,
.fifosize = 16,
.ops = &ip3106_pops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 1,
},
},
up.uartclk = TITAN_UART_CLK;
up.regshift = 0;
up.iotype = UPIO_MEM;
- up.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ up.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
up.line = 0;
if (early_serial_setup(&up))
#include <linux/tty.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
-extern int early_serial_setup(struct uart_port *port);
-
-#define STD_COM_FLAGS (ASYNC_SKIP_TEST)
-#define BASE_BAUD (1843200 / 16)
-
#endif /* CONFIG_SERIAL_8250 */
/* An arbitrary time; this can be decreased if reliability looks good */
o2_serial[0].type = PORT_16550A;
o2_serial[0].line = 0;
o2_serial[0].irq = MACEISA_SERIAL1_IRQ;
- o2_serial[0].flags = STD_COM_FLAGS;
- o2_serial[0].uartclk = BASE_BAUD * 16;
+ o2_serial[0].flags = UPF_SKIP_TEST;
+ o2_serial[0].uartclk = 1843200;
o2_serial[0].iotype = UPIO_MEM;
o2_serial[0].membase = (char *)&mace->isa.serial1;
o2_serial[0].fifosize = 14;
o2_serial[1].type = PORT_16550A;
o2_serial[1].line = 1;
o2_serial[1].irq = MACEISA_SERIAL2_IRQ;
- o2_serial[1].flags = STD_COM_FLAGS;
- o2_serial[1].uartclk = BASE_BAUD * 16;
+ o2_serial[1].flags = UPF_SKIP_TEST;
+ o2_serial[1].uartclk = 1843200;
o2_serial[1].iotype = UPIO_MEM;
o2_serial[1].membase = (char *)&mace->isa.serial2;
o2_serial[1].fifosize = 14;
return 0;
}
-static inline compat_uptr_t to_user_ptr(void *kp)
-{
- return (compat_uptr_t)(u64)kp;
-}
-
+#define to_user_ptr(p) ptr_to_compat(p)
#define from_user_ptr(p) compat_ptr(p)
static inline int save_general_regs(struct pt_regs *regs,
return 0;
}
-#define to_user_ptr(p) (p)
-#define from_user_ptr(p) (p)
+#define to_user_ptr(p) ((unsigned long)(p))
+#define from_user_ptr(p) ((void __user *)(p))
static inline int save_general_regs(struct pt_regs *regs,
struct mcontext __user *frame)
ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
if (!ret && oact) {
- ret = put_user((long)old_ka.sa.sa_handler, &oact->sa_handler);
+ ret = put_user(to_user_ptr(old_ka.sa.sa_handler), &oact->sa_handler);
ret |= put_sigset_t(&oact->sa_mask, &old_ka.sa.sa_mask);
ret |= __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
}
int compat_sys_sigaltstack(u32 __new, u32 __old, int r5,
int r6, int r7, int r8, struct pt_regs *regs)
{
- stack_32_t __user * newstack = (stack_32_t __user *)(long) __new;
- stack_32_t __user * oldstack = (stack_32_t __user *)(long) __old;
+ stack_32_t __user * newstack = compat_ptr(__new);
+ stack_32_t __user * oldstack = compat_ptr(__old);
stack_t uss, uoss;
int ret;
mm_segment_t old_fs;
set_fs(old_fs);
/* Copy the stack information to the user output buffer */
if (!ret && oldstack &&
- (put_user((long)uoss.ss_sp, &oldstack->ss_sp) ||
+ (put_user(ptr_to_compat(uoss.ss_sp), &oldstack->ss_sp) ||
__put_user(uoss.ss_flags, &oldstack->ss_flags) ||
__put_user(uoss.ss_size, &oldstack->ss_size)))
return -EFAULT;
struct ucontext uc;
unsigned long _unused[2];
unsigned int tramp[TRAMP_SIZE];
- struct siginfo *pinfo;
- void *puc;
+ struct siginfo __user *pinfo;
+ void __user *puc;
struct siginfo info;
/* 64 bit ABI allows for 288 bytes below sp before decrementing it. */
char abigap[288];
|(((unsigned int)(off)) & 0xFCUL) \
|1UL)
-static unsigned long macrisc_cfg_access(struct pci_controller* hose,
+static volatile void __iomem *macrisc_cfg_access(struct pci_controller* hose,
u8 bus, u8 dev_fn, u8 offset)
{
unsigned int caddr;
if (bus == hose->first_busno) {
if (dev_fn < (11 << 3))
- return 0;
+ return NULL;
caddr = MACRISC_CFA0(dev_fn, offset);
} else
caddr = MACRISC_CFA1(bus, dev_fn, offset);
} while (in_le32(hose->cfg_addr) != caddr);
offset &= has_uninorth ? 0x07 : 0x03;
- return ((unsigned long)hose->cfg_data) + offset;
+ return hose->cfg_data + offset;
}
static int macrisc_read_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 *val)
{
struct pci_controller *hose;
- unsigned long addr;
+ volatile void __iomem *addr;
hose = pci_bus_to_host(bus);
if (hose == NULL)
*/
switch (len) {
case 1:
- *val = in_8((u8 *)addr);
+ *val = in_8(addr);
break;
case 2:
- *val = in_le16((u16 *)addr);
+ *val = in_le16(addr);
break;
default:
- *val = in_le32((u32 *)addr);
+ *val = in_le32(addr);
break;
}
return PCIBIOS_SUCCESSFUL;
int offset, int len, u32 val)
{
struct pci_controller *hose;
- unsigned long addr;
+ volatile void __iomem *addr;
hose = pci_bus_to_host(bus);
if (hose == NULL)
*/
switch (len) {
case 1:
- out_8((u8 *)addr, val);
- (void) in_8((u8 *)addr);
+ out_8(addr, val);
+ (void) in_8(addr);
break;
case 2:
- out_le16((u16 *)addr, val);
- (void) in_le16((u16 *)addr);
+ out_le16(addr, val);
+ (void) in_le16(addr);
break;
default:
- out_le32((u32 *)addr, val);
- (void) in_le32((u32 *)addr);
+ out_le32(addr, val);
+ (void) in_le32(addr);
break;
}
return PCIBIOS_SUCCESSFUL;
+ (((unsigned int)bus) << 16) \
+ 0x01000000UL)
-static unsigned long u3_ht_cfg_access(struct pci_controller* hose,
+static volatile void __iomem *u3_ht_cfg_access(struct pci_controller* hose,
u8 bus, u8 devfn, u8 offset)
{
if (bus == hose->first_busno) {
/* For now, we don't self probe U3 HT bridge */
if (PCI_SLOT(devfn) == 0)
- return 0;
- return ((unsigned long)hose->cfg_data) +
- U3_HT_CFA0(devfn, offset);
+ return NULL;
+ return hose->cfg_data + U3_HT_CFA0(devfn, offset);
} else
- return ((unsigned long)hose->cfg_data) +
- U3_HT_CFA1(bus, devfn, offset);
+ return hose->cfg_data + U3_HT_CFA1(bus, devfn, offset);
}
static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 *val)
{
struct pci_controller *hose;
- unsigned long addr;
+ volatile void __iomem *addr;
hose = pci_bus_to_host(bus);
if (hose == NULL)
*/
switch (len) {
case 1:
- *val = in_8((u8 *)addr);
+ *val = in_8(addr);
break;
case 2:
- *val = in_le16((u16 *)addr);
+ *val = in_le16(addr);
break;
default:
- *val = in_le32((u32 *)addr);
+ *val = in_le32(addr);
break;
}
return PCIBIOS_SUCCESSFUL;
int offset, int len, u32 val)
{
struct pci_controller *hose;
- unsigned long addr;
+ volatile void __iomem *addr;
hose = pci_bus_to_host(bus);
if (hose == NULL)
*/
switch (len) {
case 1:
- out_8((u8 *)addr, val);
- (void) in_8((u8 *)addr);
+ out_8(addr, val);
+ (void) in_8(addr);
break;
case 2:
- out_le16((u16 *)addr, val);
- (void) in_le16((u16 *)addr);
+ out_le16(addr, val);
+ (void) in_le16(addr);
break;
default:
- out_le32((u32 *)addr, val);
- (void) in_le32((u32 *)addr);
+ out_le32((u32 __iomem *)addr, val);
+ (void) in_le32(addr);
break;
}
return PCIBIOS_SUCCESSFUL;
|(((unsigned int)(off)) & 0xfcU) \
|1UL)
-static unsigned long u4_pcie_cfg_access(struct pci_controller* hose,
+static volatile void __iomem *u4_pcie_cfg_access(struct pci_controller* hose,
u8 bus, u8 dev_fn, int offset)
{
unsigned int caddr;
} while (in_le32(hose->cfg_addr) != caddr);
offset &= 0x03;
- return ((unsigned long)hose->cfg_data) + offset;
+ return hose->cfg_data + offset;
}
static int u4_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 *val)
{
struct pci_controller *hose;
- unsigned long addr;
+ volatile void __iomem *addr;
hose = pci_bus_to_host(bus);
if (hose == NULL)
*/
switch (len) {
case 1:
- *val = in_8((u8 *)addr);
+ *val = in_8(addr);
break;
case 2:
- *val = in_le16((u16 *)addr);
+ *val = in_le16(addr);
break;
default:
- *val = in_le32((u32 *)addr);
+ *val = in_le32(addr);
break;
}
return PCIBIOS_SUCCESSFUL;
int offset, int len, u32 val)
{
struct pci_controller *hose;
- unsigned long addr;
+ volatile void __iomem *addr;
hose = pci_bus_to_host(bus);
if (hose == NULL)
*/
switch (len) {
case 1:
- out_8((u8 *)addr, val);
- (void) in_8((u8 *)addr);
+ out_8(addr, val);
+ (void) in_8(addr);
break;
case 2:
- out_le16((u16 *)addr, val);
- (void) in_le16((u16 *)addr);
+ out_le16(addr, val);
+ (void) in_le16(addr);
break;
default:
- out_le32((u32 *)addr, val);
- (void) in_le32((u32 *)addr);
+ out_le32(addr, val);
+ (void) in_le32(addr);
break;
}
return PCIBIOS_SUCCESSFUL;
* the reg address cell, we shall fix that by killing struct
* reg_property and using some accessor functions instead
*/
- hose->cfg_data = (volatile unsigned char *)ioremap(0xf2000000,
- 0x02000000);
+ hose->cfg_data = ioremap(0xf2000000, 0x02000000);
/*
* /ht node doesn't expose a "ranges" property, so we "remove"
static u32 *dart_vbase;
/* Mapped base address for the dart */
-static unsigned int *__iomem dart;
+static unsigned int __iomem *dart;
/* Dummy val that entries are set to when unused */
static unsigned int dart_emptyval;
port.irq = 0;
port.uartclk = clocks.uart0;
port.regshift = 0;
- port.iotype = SERIAL_IO_MEM;
- port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ port.iotype = UPIO_MEM;
+ port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
port.line = 0;
if (early_serial_setup(&port) != 0) {
port.irq = ACTING_UART0_INT;
port.uartclk = uart_clock;
port.regshift = 0;
- port.iotype = SERIAL_IO_MEM;
- port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ port.iotype = UPIO_MEM;
+ port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
port.line = 0;
if (early_serial_setup(&port) != 0) {
port.irq = 0;
port.uartclk = clocks.uart0;
port.regshift = 0;
- port.iotype = SERIAL_IO_MEM;
- port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ port.iotype = UPIO_MEM;
+ port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
port.line = 0;
if (early_serial_setup(&port) != 0) {
port.irq = UART0_INT;
port.uartclk = clocks.uart0;
port.regshift = 0;
- port.iotype = SERIAL_IO_MEM;
- port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ port.iotype = UPIO_MEM;
+ port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
port.line = 0;
if (early_serial_setup(&port) != 0) {
port.irq = UART0_INT;
port.uartclk = clocks.uart0;
port.regshift = 0;
- port.iotype = SERIAL_IO_MEM;
- port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ port.iotype = UPIO_MEM;
+ port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
port.line = 0;
if (early_serial_setup(&port) != 0) {
port.irq = old_ports[i].irq;
port.uartclk = old_ports[i].baud_base * 16;
port.regshift = old_ports[i].iomem_reg_shift;
- port.iotype = SERIAL_IO_MEM;
- port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ port.iotype = UPIO_MEM;
+ port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
port.line = i;
if (early_serial_setup(&port) != 0) {
port.irq = UART0_INT;
port.uartclk = clocks.uart0;
port.regshift = 0;
- port.iotype = SERIAL_IO_MEM;
- port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ port.iotype = UPIO_MEM;
+ port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
port.line = 0;
if (early_serial_setup(&port) != 0) {
struct uart_port p;
memset(&p, 0, sizeof (p));
- p.iotype = SERIAL_IO_MEM;
+ p.iotype = UPIO_MEM;
p.membase = (unsigned char __iomem *)(VIRT_IMMRBAR + 0x4500);
p.uartclk = binfo->bi_busfreq;
gen550_init(0, &p);
memset(&p, 0, sizeof (p));
- p.iotype = SERIAL_IO_MEM;
+ p.iotype = UPIO_MEM;
p.membase = (unsigned char __iomem *)(VIRT_IMMRBAR + 0x4600);
p.uartclk = binfo->bi_busfreq;
binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0);
memset(&p, 0, sizeof (p));
- p.iotype = SERIAL_IO_MEM;
+ p.iotype = UPIO_MEM;
p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET;
p.uartclk = binfo->bi_busfreq;
gen550_init(0, &p);
memset(&p, 0, sizeof (p));
- p.iotype = SERIAL_IO_MEM;
+ p.iotype = UPIO_MEM;
p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET;
p.uartclk = binfo->bi_busfreq;
binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0);
memset(&p, 0, sizeof (p));
- p.iotype = SERIAL_IO_MEM;
+ p.iotype = UPIO_MEM;
p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET;
p.uartclk = binfo->bi_busfreq;
gen550_init(0, &p);
memset(&p, 0, sizeof (p));
- p.iotype = SERIAL_IO_MEM;
+ p.iotype = UPIO_MEM;
p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET;
p.uartclk = binfo->bi_busfreq;
uart_req.irq = MPC85xx_IRQ_EXT9;
uart_req.flags = STD_COM_FLAGS;
uart_req.uartclk = BASE_BAUD * 16;
- uart_req.iotype = SERIAL_IO_MEM;
+ uart_req.iotype = UPIO_MEM;
uart_req.mapbase = UARTA_ADDR;
uart_req.membase = ioremap(uart_req.mapbase, MPC85xx_UART0_SIZE);
uart_req.type = PORT_16650;
binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0);
memset(&p, 0, sizeof (p));
- p.iotype = SERIAL_IO_MEM;
+ p.iotype = UPIO_MEM;
p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET;
p.uartclk = binfo->bi_busfreq;
gen550_init(0, &p);
memset(&p, 0, sizeof (p));
- p.iotype = SERIAL_IO_MEM;
+ p.iotype = UPIO_MEM;
p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET;
p.uartclk = binfo->bi_busfreq;
port.uartclk = BASE_BAUD * 16;
port.irq = UART0_INT;
port.flags = STD_COM_FLAGS | UPF_IOREMAP;
- port.iotype = SERIAL_IO_MEM;
+ port.iotype = UPIO_MEM;
port.mapbase = CHESTNUT_UART0_IO_BASE;
port.regshift = 0;
port.irq = EV64260_UART_0_IRQ;
port.uartclk = BASE_BAUD * 16;
port.regshift = 2;
- port.iotype = SERIAL_IO_MEM;
+ port.iotype = UPIO_MEM;
port.flags = STD_COM_FLAGS;
#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
serial_req.uartclk = UART_CLK;
serial_req.irq = 4;
serial_req.flags = STD_COM_FLAGS;
- serial_req.iotype = SERIAL_IO_MEM;
+ serial_req.iotype = UPIO_MEM;
serial_req.membase = (u_char *) PPC7D_SERIAL_0;
gen550_init(0, &serial_req);
memset(&serial_req, 0, sizeof(serial_req));
serial_req.uartclk = uart_clk;
serial_req.irq = UART0_INT;
- serial_req.flags = ASYNC_BOOT_AUTOCONF;
- serial_req.iotype = SERIAL_IO_MEM;
+ serial_req.flags = UPF_BOOT_AUTOCONF;
+ serial_req.iotype = UPIO_MEM;
serial_req.membase = (u_char *)UART0_IO_BASE;
serial_req.regshift = 0;
#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
memset(&serial_req, 0, sizeof (serial_req));
- serial_req.iotype = SERIAL_IO_MEM;
+ serial_req.iotype = UPIO_MEM;
serial_req.mapbase = pdata[0].mapbase;
serial_req.membase = pdata[0].membase;
serial_req.regshift = 0;
#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
memset(&serial_req, 0, sizeof (serial_req));
- serial_req.iotype = SERIAL_IO_MEM;
+ serial_req.iotype = UPIO_MEM;
serial_req.mapbase = pdata[0].mapbase;
serial_req.membase = pdata[0].membase;
serial_req.regshift = 0;
#define SET_STAT_UID(stat, uid) (stat).st_uid = high2lowuid(uid)
#define SET_STAT_GID(stat, gid) (stat).st_gid = high2lowgid(gid)
-asmlinkage long sys32_chown16(const char * filename, u16 user, u16 group)
+asmlinkage long sys32_chown16(const char __user * filename, u16 user, u16 group)
{
return sys_chown(filename, low2highuid(user), low2highgid(group));
}
-asmlinkage long sys32_lchown16(const char * filename, u16 user, u16 group)
+asmlinkage long sys32_lchown16(const char __user * filename, u16 user, u16 group)
{
return sys_lchown(filename, low2highuid(user), low2highgid(group));
}
low2highuid(suid));
}
-asmlinkage long sys32_getresuid16(u16 *ruid, u16 *euid, u16 *suid)
+asmlinkage long sys32_getresuid16(u16 __user *ruid, u16 __user *euid, u16 __user *suid)
{
int retval;
low2highgid(sgid));
}
-asmlinkage long sys32_getresgid16(u16 *rgid, u16 *egid, u16 *sgid)
+asmlinkage long sys32_getresgid16(u16 __user *rgid, u16 __user *egid, u16 __user *sgid)
{
int retval;
return sys_setfsgid((gid_t)gid);
}
-static int groups16_to_user(u16 *grouplist, struct group_info *group_info)
+static int groups16_to_user(u16 __user *grouplist, struct group_info *group_info)
{
int i;
u16 group;
return 0;
}
-static int groups16_from_user(struct group_info *group_info, u16 *grouplist)
+static int groups16_from_user(struct group_info *group_info, u16 __user *grouplist)
{
int i;
u16 group;
return 0;
}
-asmlinkage long sys32_getgroups16(int gidsetsize, u16 *grouplist)
+asmlinkage long sys32_getgroups16(int gidsetsize, u16 __user *grouplist)
{
int i;
return i;
}
-asmlinkage long sys32_setgroups16(int gidsetsize, u16 *grouplist)
+asmlinkage long sys32_setgroups16(int gidsetsize, u16 __user *grouplist)
{
struct group_info *group_info;
int retval;
/* 32-bit timeval and related flotsam. */
-static inline long get_tv32(struct timeval *o, struct compat_timeval *i)
+static inline long get_tv32(struct timeval *o, struct compat_timeval __user *i)
{
return (!access_ok(VERIFY_READ, o, sizeof(*o)) ||
(__get_user(o->tv_sec, &i->tv_sec) ||
__get_user(o->tv_usec, &i->tv_usec)));
}
-static inline long put_tv32(struct compat_timeval *o, struct timeval *i)
+static inline long put_tv32(struct compat_timeval __user *o, struct timeval *i)
{
return (!access_ok(VERIFY_WRITE, o, sizeof(*o)) ||
(__put_user(i->tv_sec, &o->tv_sec) ||
return -ENOSYS;
}
-asmlinkage long sys32_truncate64(const char * path, unsigned long high, unsigned long low)
+asmlinkage long sys32_truncate64(const char __user * path, unsigned long high, unsigned long low)
{
if ((int)high < 0)
return -EINVAL;
return sys_ftruncate(fd, (high << 32) | low);
}
-int cp_compat_stat(struct kstat *stat, struct compat_stat *statbuf)
+int cp_compat_stat(struct kstat *stat, struct compat_stat __user *statbuf)
{
int err;
extern struct timezone sys_tz;
-asmlinkage long sys32_gettimeofday(struct compat_timeval *tv, struct timezone *tz)
+asmlinkage long sys32_gettimeofday(struct compat_timeval __user *tv, struct timezone __user *tz)
{
if (tv) {
struct timeval ktv;
return 0;
}
-static inline long get_ts32(struct timespec *o, struct compat_timeval *i)
+static inline long get_ts32(struct timespec *o, struct compat_timeval __user *i)
{
long usec;
return 0;
}
-asmlinkage long sys32_settimeofday(struct compat_timeval *tv, struct timezone *tz)
+asmlinkage long sys32_settimeofday(struct compat_timeval __user *tv, struct timezone __user *tz)
{
struct timespec kts;
struct timezone ktz;
return -ERESTARTNOHAND;
}
-asmlinkage long sys32_pread64(unsigned int fd, char *ubuf,
+asmlinkage long sys32_pread64(unsigned int fd, char __user *ubuf,
size_t count, u32 poshi, u32 poslo)
{
if ((compat_ssize_t) count < 0)
return sys_pread64(fd, ubuf, count, ((loff_t)AA(poshi) << 32) | AA(poslo));
}
-asmlinkage long sys32_pwrite64(unsigned int fd, const char *ubuf,
+asmlinkage long sys32_pwrite64(unsigned int fd, const char __user *ubuf,
size_t count, u32 poshi, u32 poslo)
{
if ((compat_ssize_t) count < 0)
return sys_readahead(fd, ((loff_t)AA(offhi) << 32) | AA(offlo), count);
}
-asmlinkage long sys32_sendfile(int out_fd, int in_fd, compat_off_t *offset, size_t count)
+asmlinkage long sys32_sendfile(int out_fd, int in_fd, compat_off_t __user *offset, size_t count)
{
mm_segment_t old_fs = get_fs();
int ret;
}
asmlinkage long sys32_sendfile64(int out_fd, int in_fd,
- compat_loff_t *offset, s32 count)
+ compat_loff_t __user *offset, s32 count)
{
mm_segment_t old_fs = get_fs();
int ret;
extern int do_adjtimex(struct timex *);
-asmlinkage long sys32_adjtimex(struct timex32 *utp)
+asmlinkage long sys32_adjtimex(struct timex32 __user *utp)
{
struct timex txc;
int ret;
u32 __unused[4];
};
-asmlinkage long sys32_sysctl(struct __sysctl_args32 *args)
+asmlinkage long sys32_sysctl(struct __sysctl_args32 __user *args)
{
struct __sysctl_args32 tmp;
int error;
- size_t oldlen, *oldlenp = NULL;
- unsigned long addr = (((long)&args->__unused[0]) + 7) & ~7;
+ size_t oldlen;
+ size_t __user *oldlenp = NULL;
+ unsigned long addr = (((unsigned long)&args->__unused[0]) + 7) & ~7;
if (copy_from_user(&tmp, args, sizeof(tmp)))
return -EFAULT;
basically copy the whole sysctl.c here, and
glibc's __sysctl uses rw memory for the structure
anyway. */
- if (get_user(oldlen, (u32 *)A(tmp.oldlenp)) ||
- put_user(oldlen, (size_t *)addr))
+ if (get_user(oldlen, (u32 __user *)compat_ptr(tmp.oldlenp)) ||
+ put_user(oldlen, (size_t __user *)addr))
return -EFAULT;
- oldlenp = (size_t *)addr;
+ oldlenp = (size_t __user *)addr;
}
lock_kernel();
- error = do_sysctl((int *)A(tmp.name), tmp.nlen, (void *)A(tmp.oldval),
- oldlenp, (void *)A(tmp.newval), tmp.newlen);
+ error = do_sysctl(compat_ptr(tmp.name), tmp.nlen, compat_ptr(tmp.oldval),
+ oldlenp, compat_ptr(tmp.newval), tmp.newlen);
unlock_kernel();
if (oldlenp) {
if (!error) {
- if (get_user(oldlen, (size_t *)addr) ||
- put_user(oldlen, (u32 *)A(tmp.oldlenp)))
+ if (get_user(oldlen, (size_t __user *)addr) ||
+ put_user(oldlen, (u32 __user *)compat_ptr(tmp.oldlenp)))
error = -EFAULT;
}
copy_to_user(args->__unused, tmp.__unused, sizeof(tmp.__unused));
unsigned long st_ino;
};
-static int cp_stat64(struct stat64_emu31 *ubuf, struct kstat *stat)
+static int cp_stat64(struct stat64_emu31 __user *ubuf, struct kstat *stat)
{
struct stat64_emu31 tmp;
return copy_to_user(ubuf,&tmp,sizeof(tmp)) ? -EFAULT : 0;
}
-asmlinkage long sys32_stat64(char * filename, struct stat64_emu31 * statbuf)
+asmlinkage long sys32_stat64(char __user * filename, struct stat64_emu31 __user * statbuf)
{
struct kstat stat;
int ret = vfs_stat(filename, &stat);
return ret;
}
-asmlinkage long sys32_lstat64(char * filename, struct stat64_emu31 * statbuf)
+asmlinkage long sys32_lstat64(char __user * filename, struct stat64_emu31 __user * statbuf)
{
struct kstat stat;
int ret = vfs_lstat(filename, &stat);
return ret;
}
-asmlinkage long sys32_fstat64(unsigned long fd, struct stat64_emu31 * statbuf)
+asmlinkage long sys32_fstat64(unsigned long fd, struct stat64_emu31 __user * statbuf)
{
struct kstat stat;
int ret = vfs_fstat(fd, &stat);
asmlinkage unsigned long
-old32_mmap(struct mmap_arg_struct_emu31 *arg)
+old32_mmap(struct mmap_arg_struct_emu31 __user *arg)
{
struct mmap_arg_struct_emu31 a;
int error = -EFAULT;
}
asmlinkage long
-sys32_mmap2(struct mmap_arg_struct_emu31 *arg)
+sys32_mmap2(struct mmap_arg_struct_emu31 __user *arg)
{
struct mmap_arg_struct_emu31 a;
int error = -EFAULT;
return error;
}
-asmlinkage long sys32_read(unsigned int fd, char * buf, size_t count)
+asmlinkage long sys32_read(unsigned int fd, char __user * buf, size_t count)
{
if ((compat_ssize_t) count < 0)
return -EINVAL;
return sys_read(fd, buf, count);
}
-asmlinkage long sys32_write(unsigned int fd, char * buf, size_t count)
+asmlinkage long sys32_write(unsigned int fd, char __user * buf, size_t count)
{
if ((compat_ssize_t) count < 0)
return -EINVAL;
{
unsigned long clone_flags;
unsigned long newsp;
- int *parent_tidptr, *child_tidptr;
+ int __user *parent_tidptr, *child_tidptr;
clone_flags = regs.gprs[3] & 0xffffffffUL;
newsp = regs.orig_gpr2 & 0x7fffffffUL;
- parent_tidptr = (int *) (regs.gprs[4] & 0x7fffffffUL);
- child_tidptr = (int *) (regs.gprs[5] & 0x7fffffffUL);
+ parent_tidptr = compat_ptr(regs.gprs[4]);
+ child_tidptr = compat_ptr(regs.gprs[5]);
if (!newsp)
newsp = regs.gprs[15];
return do_fork(clone_flags, newsp, ®s, 0,
#ifndef CONFIG_64BIT
struct sel_arg_struct {
unsigned long n;
- fd_set *inp, *outp, *exp;
- struct timeval *tvp;
+ fd_set __user *inp, *outp, *exp;
+ struct timeval __user *tvp;
};
asmlinkage long old_select(struct sel_arg_struct __user *arg)
info.si_signo = signal;
info.si_errno = 0;
info.si_code = ILL_ILLOPC;
- info.si_addr = (void *) location;
+ info.si_addr = (void __user *) location;
do_trap(interruption_code, signal,
"illegal operation", regs, &info);
}
{
volatile __u8 *bp;
volatile __u16 *p;
+ unsigned char *s = addr;
if (CHECK_AX88796L_PORT(port)) {
p = (volatile unsigned short *)port88796l(port, 0);
- while (count--) *((unsigned char *) addr)++ = *p & 0xff;
+ while (count--) *s++ = *p & 0xff;
} else if (PXSEG(port))
- while (count--) *((unsigned char *) addr)++ = *(volatile unsigned char *)port;
+ while (count--) *s++ = *(volatile unsigned char *)port;
else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) {
bp = (__u8 *)PCI_IOMAP(port);
- while (count--) *((volatile unsigned char *) addr)++ = *bp;
+ while (count--) *s++ = *bp;
} else {
p = (volatile unsigned short *)port2adr(port);
- while (count--) *((unsigned char *) addr)++ = *p & 0xff;
+ while (count--) *s++ = *p & 0xff;
}
}
void rts7751r2d_insw(unsigned long port, void *addr, unsigned long count)
{
volatile __u16 *p;
+ __u16 *s = addr;
if (CHECK_AX88796L_PORT(port))
p = (volatile unsigned short *)port88796l(port, 1);
p = (volatile unsigned short *)PCI_IOMAP(port);
else
p = (volatile unsigned short *)port2adr(port);
- while (count--) *((__u16 *) addr)++ = *p;
+ while (count--) *s++ = *p;
}
void rts7751r2d_insl(unsigned long port, void *addr, unsigned long count)
maybebadio(insl, port);
else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) {
volatile __u32 *p = (__u32 *)PCI_IOMAP(port);
+ __u32 *s = addr;
- while (count--) *((__u32 *) addr)++ = *p;
+ while (count--) *s++ = *p;
} else
maybebadio(insl, port);
}
{
volatile __u8 *bp;
volatile __u16 *p;
+ const __u8 *s = addr;
if (CHECK_AX88796L_PORT(port)) {
p = (volatile unsigned short *)port88796l(port, 0);
- while (count--) *p = *((unsigned char *) addr)++;
+ while (count--) *p = *s++;
} else if (PXSEG(port))
- while (count--) *(volatile unsigned char *)port = *((unsigned char *) addr)++;
+ while (count--) *(volatile unsigned char *)port = *s++;
else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) {
bp = (__u8 *)PCI_IOMAP(port);
- while (count--) *bp = *((volatile unsigned char *) addr)++;
+ while (count--) *bp = *s++;
} else {
p = (volatile unsigned short *)port2adr(port);
- while (count--) *p = *((unsigned char *) addr)++;
+ while (count--) *p = *s++;
}
}
void rts7751r2d_outsw(unsigned long port, const void *addr, unsigned long count)
{
volatile __u16 *p;
+ const __u16 *s = addr;
if (CHECK_AX88796L_PORT(port))
p = (volatile unsigned short *)port88796l(port, 1);
p = (volatile unsigned short *)PCI_IOMAP(port);
else
p = (volatile unsigned short *)port2adr(port);
- while (count--) *p = *((__u16 *) addr)++;
+ while (count--) *p = *s++;
}
void rts7751r2d_outsl(unsigned long port, const void *addr, unsigned long count)
maybebadio(outsl, port);
else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) {
volatile __u32 *p = (__u32 *)PCI_IOMAP(port);
+ const __u32 *s = addr;
- while (count--) *p = *((__u32 *) addr)++;
+ while (count--) *p = *s++;
} else
maybebadio(outsl, port);
}
rq->flags &= ~REQ_STARTED;
- __elv_add_request(q, rq, ELEVATOR_INSERT_REQUEUE, 0);
+ elv_insert(q, rq, ELEVATOR_INSERT_REQUEUE);
}
static void elv_drain_elevator(request_queue_t *q)
}
}
-void __elv_add_request(request_queue_t *q, struct request *rq, int where,
- int plug)
+void elv_insert(request_queue_t *q, struct request *rq, int where)
{
struct list_head *pos;
unsigned ordseq;
- if (q->ordcolor)
- rq->flags |= REQ_ORDERED_COLOR;
-
- if (rq->flags & (REQ_SOFTBARRIER | REQ_HARDBARRIER)) {
- /*
- * toggle ordered color
- */
- if (blk_barrier_rq(rq))
- q->ordcolor ^= 1;
-
- /*
- * barriers implicitly indicate back insertion
- */
- if (where == ELEVATOR_INSERT_SORT)
- where = ELEVATOR_INSERT_BACK;
-
- /*
- * this request is scheduling boundary, update end_sector
- */
- if (blk_fs_request(rq)) {
- q->end_sector = rq_end_sector(rq);
- q->boundary_rq = rq;
- }
- } else if (!(rq->flags & REQ_ELVPRIV) && where == ELEVATOR_INSERT_SORT)
- where = ELEVATOR_INSERT_BACK;
-
- if (plug)
- blk_plug_device(q);
-
rq->q = q;
switch (where) {
}
}
+void __elv_add_request(request_queue_t *q, struct request *rq, int where,
+ int plug)
+{
+ if (q->ordcolor)
+ rq->flags |= REQ_ORDERED_COLOR;
+
+ if (rq->flags & (REQ_SOFTBARRIER | REQ_HARDBARRIER)) {
+ /*
+ * toggle ordered color
+ */
+ if (blk_barrier_rq(rq))
+ q->ordcolor ^= 1;
+
+ /*
+ * barriers implicitly indicate back insertion
+ */
+ if (where == ELEVATOR_INSERT_SORT)
+ where = ELEVATOR_INSERT_BACK;
+
+ /*
+ * this request is scheduling boundary, update
+ * end_sector
+ */
+ if (blk_fs_request(rq)) {
+ q->end_sector = rq_end_sector(rq);
+ q->boundary_rq = rq;
+ }
+ } else if (!(rq->flags & REQ_ELVPRIV) && where == ELEVATOR_INSERT_SORT)
+ where = ELEVATOR_INSERT_BACK;
+
+ if (plug)
+ blk_plug_device(q);
+
+ elv_insert(q, rq, where);
+}
+
void elv_add_request(request_queue_t *q, struct request *rq, int where,
int plug)
{
rq->end_io = end_io;
q->prepare_flush_fn(q, rq);
- __elv_add_request(q, rq, ELEVATOR_INSERT_FRONT, 0);
+ elv_insert(q, rq, ELEVATOR_INSERT_FRONT);
}
static inline struct request *start_ordered(request_queue_t *q,
else
q->ordseq |= QUEUE_ORDSEQ_POSTFLUSH;
- __elv_add_request(q, rq, ELEVATOR_INSERT_FRONT, 0);
+ elv_insert(q, rq, ELEVATOR_INSERT_FRONT);
if (q->ordered & QUEUE_ORDERED_PREFLUSH) {
queue_flush(q, QUEUE_ORDERED_PREFLUSH);
if (!rq->timeout)
rq->timeout = BLK_DEFAULT_TIMEOUT;
+ rq->retries = 0;
+
start_time = jiffies;
/* ignore return value. All information is passed back to caller
rq->data = buffer;
rq->data_len = bytes;
rq->flags |= REQ_BLOCK_PC;
+ rq->retries = 0;
blk_execute_rq(q, bd_disk, rq, 0);
err = rq->errors & 0xff; /* only 8 bit SCSI status */
config SYNCLINK_GT
tristate "SyncLink GT/AC support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && PCI
help
Support for SyncLink GT and SyncLink AC families of
synchronous and asynchronous serial adapters
config HISAX_AMD7930
bool "Am7930 (EXPERIMENTAL)"
- depends on EXPERIMENTAL && SPARC
+ depends on EXPERIMENTAL && SPARC && BROKEN
help
This enables HiSax support for the AMD7930 chips on some SPARCs.
This code is not finished yet.
config WINDFARM_PM112
tristate "Support for thermal management on PowerMac11,2"
depends on WINDFARM && I2C && PMAC_SMU
- select I2C_PMAC_SMU
+ select I2C_POWERMAC
help
This driver provides thermal control for the PowerMac11,2
which are the recent dual and quad G5 machines using the
if (kp->clipcount > 2048)
return -EINVAL;
if (kp->clipcount) {
- struct v4l2_clip32 *uclips = compat_ptr(up->clips);
- struct v4l2_clip *kclips;
+ struct v4l2_clip32 __user *uclips;
+ struct v4l2_clip __user *kclips;
int n = kp->clipcount;
+ compat_caddr_t p;
+ if (get_user(p, &up->clips))
+ return -EFAULT;
+ uclips = compat_ptr(p);
kclips = compat_alloc_user_space(n * sizeof(struct v4l2_clip));
kp->clips = kclips;
while (--n >= 0) {
- if (!access_ok(VERIFY_READ, &uclips->c, sizeof(uclips->c)) ||
- copy_from_user(&kclips->c, &uclips->c, sizeof(uclips->c)))
+ if (copy_in_user(&kclips->c, &uclips->c, sizeof(uclips->c)))
+ return -EFAULT;
+ if (put_user(n ? kclips + 1 : NULL, &kclips->next))
return -EFAULT;
- kclips->next = n ? kclips + 1 : 0;
uclips += 1;
kclips += 1;
}
} else
- kp->clips = 0;
+ kp->clips = NULL;
return 0;
}
static int put_v4l2_window32(struct v4l2_window *kp, struct v4l2_window32 __user *up)
{
- if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_window32)) ||
- copy_to_user(&up->w, &kp->w, sizeof(up->w)) ||
+ if (copy_to_user(&up->w, &kp->w, sizeof(up->w)) ||
put_user(kp->field, &up->field) ||
put_user(kp->chromakey, &up->chromakey) ||
put_user(kp->clipcount, &up->clipcount))
static inline int get_v4l2_pix_format(struct v4l2_pix_format *kp, struct v4l2_pix_format __user *up)
{
- if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_pix_format)) ||
- copy_from_user(kp, up, sizeof(struct v4l2_pix_format)))
- return -EFAULT;
+ if (copy_from_user(kp, up, sizeof(struct v4l2_pix_format)))
+ return -EFAULT;
return 0;
}
static inline int put_v4l2_pix_format(struct v4l2_pix_format *kp, struct v4l2_pix_format __user *up)
{
- if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_pix_format)) ||
- copy_to_user(up, kp, sizeof(struct v4l2_pix_format)))
- return -EFAULT;
+ if (copy_to_user(up, kp, sizeof(struct v4l2_pix_format)))
+ return -EFAULT;
return 0;
}
static inline int get_v4l2_vbi_format(struct v4l2_vbi_format *kp, struct v4l2_vbi_format __user *up)
{
- if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_vbi_format)) ||
- copy_from_user(kp, up, sizeof(struct v4l2_vbi_format)))
- return -EFAULT;
+ if (copy_from_user(kp, up, sizeof(struct v4l2_vbi_format)))
+ return -EFAULT;
return 0;
}
static inline int put_v4l2_vbi_format(struct v4l2_vbi_format *kp, struct v4l2_vbi_format __user *up)
{
- if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_vbi_format)) ||
- copy_to_user(up, kp, sizeof(struct v4l2_vbi_format)))
- return -EFAULT;
+ if (copy_to_user(up, kp, sizeof(struct v4l2_vbi_format)))
+ return -EFAULT;
return 0;
}
static inline int get_v4l2_standard(struct v4l2_standard *kp, struct v4l2_standard __user *up)
{
- if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_standard)) ||
- copy_from_user(kp, up, sizeof(struct v4l2_standard)))
- return -EFAULT;
+ if (copy_from_user(kp, up, sizeof(struct v4l2_standard)))
+ return -EFAULT;
return 0;
}
static inline int put_v4l2_standard(struct v4l2_standard *kp, struct v4l2_standard __user *up)
{
- if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_standard)) ||
- copy_to_user(up, kp, sizeof(struct v4l2_standard)))
- return -EFAULT;
+ if (copy_to_user(up, kp, sizeof(struct v4l2_standard)))
+ return -EFAULT;
return 0;
}
static inline int get_v4l2_tuner(struct v4l2_tuner *kp, struct v4l2_tuner __user *up)
{
- if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_tuner)) ||
- copy_from_user(kp, up, sizeof(struct v4l2_tuner)))
- return -EFAULT;
+ if (copy_from_user(kp, up, sizeof(struct v4l2_tuner)))
+ return -EFAULT;
return 0;
}
static inline int put_v4l2_tuner(struct v4l2_tuner *kp, struct v4l2_tuner __user *up)
{
- if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_tuner)) ||
- copy_to_user(up, kp, sizeof(struct v4l2_tuner)))
- return -EFAULT;
+ if (copy_to_user(up, kp, sizeof(struct v4l2_tuner)))
+ return -EFAULT;
return 0;
}
break;
case V4L2_MEMORY_USERPTR:
{
- unsigned long tmp = (unsigned long)compat_ptr(up->m.userptr);
+ compat_long_t tmp;
- if(get_user(kp->length, &up->length) ||
- get_user(kp->m.userptr, &tmp))
- return -EFAULT;
+ if (get_user(kp->length, &up->length) ||
+ get_user(tmp, &up->m.userptr))
+ return -EFAULT;
+
+ kp->m.userptr = (unsigned long)compat_ptr(tmp);
}
break;
case V4L2_MEMORY_OVERLAY:
static inline int get_v4l2_input32(struct v4l2_input *kp, struct v4l2_input __user *up)
{
- if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_input) - 4) ||
- copy_from_user(kp, up, sizeof(struct v4l2_input) - 4))
- return -EFAULT;
+ if (copy_from_user(kp, up, sizeof(struct v4l2_input) - 4))
+ return -EFAULT;
return 0;
}
static inline int put_v4l2_input32(struct v4l2_input *kp, struct v4l2_input __user *up)
{
- if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_input) - 4) ||
- copy_to_user(up, kp, sizeof(struct v4l2_input) - 4))
- return -EFAULT;
+ if (copy_to_user(up, kp, sizeof(struct v4l2_input) - 4))
+ return -EFAULT;
return 0;
}
static inline int get_v4l2_input(struct v4l2_input *kp, struct v4l2_input __user *up)
{
- if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_input)) ||
- copy_from_user(kp, up, sizeof(struct v4l2_input)))
- return -EFAULT;
+ if (copy_from_user(kp, up, sizeof(struct v4l2_input)))
+ return -EFAULT;
return 0;
}
static inline int put_v4l2_input(struct v4l2_input *kp, struct v4l2_input __user *up)
{
- if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_input)) ||
- copy_to_user(up, kp, sizeof(struct v4l2_input)))
- return -EFAULT;
+ if (copy_to_user(up, kp, sizeof(struct v4l2_input)))
+ return -EFAULT;
return 0;
}
config MTD_XIP
bool "XIP aware MTD support"
- depends on !SMP && (MTD_CFI_INTELEXT || MTD_CFI_AMDSTD) && EXPERIMENTAL && ARM
+ depends on !SMP && (MTD_CFI_INTELEXT || MTD_CFI_AMDSTD) && EXPERIMENTAL && ARCH_MTD_XIP
default y if XIP_KERNEL
help
This allows MTD support to work with flash memory which is also
if (essid->length) {
dwrq->flags = 1; /* set ESSID to ON for Wireless Extensions */
/* if it is to big, trunk it */
- dwrq->length = min(IW_ESSID_MAX_SIZE, essid->length);
+ dwrq->length = min((u8)IW_ESSID_MAX_SIZE, essid->length);
} else {
dwrq->flags = 0;
dwrq->length = 0;
static struct uart_port serial21285_port = {
.mapbase = 0x42000160,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = NO_IRQ,
.fifosize = 16,
.ops = &serial21285_ops,
* and restore the IER
*/
wait_for_xmitr(up, BOTH_EMPTY);
+ up->ier |= UART_IER_THRI;
serial_out(up, UART_IER, ier | UART_IER_THRI);
}
#elif defined(CONFIG_SOC_AU1550)
PORT(UART0_ADDR, AU1550_UART0_INT),
PORT(UART1_ADDR, AU1550_UART1_INT),
- PORT(UART2_ADDR, AU1550_UART2_INT),
PORT(UART3_ADDR, AU1550_UART3_INT),
#elif defined(CONFIG_SOC_AU1200)
PORT(UART0_ADDR, AU1200_UART0_INT),
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_4, 0, 0,
pbn_b0_4_1843200 },
+ { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
+ PCI_VENDOR_ID_AFAVLAB,
+ PCI_SUBDEVICE_ID_AFAVLAB_P061, 0, 0,
+ pbn_b0_4_1152000 },
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_232, 0, 0,
.port = {
.membase = (void *)IO_ADDRESS(INTEGRATOR_UART0_BASE),
.mapbase = INTEGRATOR_UART0_BASE,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = IRQ_UARTINT0,
.uartclk = 14745600,
.fifosize = 16,
.port = {
.membase = (void *)IO_ADDRESS(INTEGRATOR_UART1_BASE),
.mapbase = INTEGRATOR_UART1_BASE,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = IRQ_UARTINT1,
.uartclk = 14745600,
.fifosize = 16,
int ret = 0;
switch (up->port.iotype) {
- case SERIAL_IO_MEM:
+ case UPIO_MEM:
if (up->port.mapbase) {
*res = request_mem_region(up->port.mapbase, size, "serial");
if (!*res)
}
break;
- case SERIAL_IO_HUB6:
- case SERIAL_IO_PORT:
+ case UPIO_HUB6:
+ case UPIO_PORT:
*res = request_region(up->port.iobase, size, "serial");
if (!*res)
ret = -EBUSY;
size <<= up->port.regshift;
switch (up->port.iotype) {
- case SERIAL_IO_MEM:
+ case UPIO_MEM:
if (up->port.mapbase) {
/*
* Unmap the area.
}
break;
- case SERIAL_IO_HUB6:
- case SERIAL_IO_PORT:
+ case UPIO_HUB6:
+ case UPIO_PORT:
start = up->port.iobase;
if (size)
/* If we have not enough room in tty flip buffer, then we try
* later, which will be the next rx-interrupt or a timeout
*/
- if ((tty->flip.count + i) >= TTY_FLIPBUF_SIZE) {
- tty->flip.work.func((void *)tty);
- if ((tty->flip.count + i) >= TTY_FLIPBUF_SIZE) {
- printk(KERN_WARNING "TTY_DONT_FLIP set\n");
- return;
- }
+ if(tty_buffer_request_room(tty, i) < i) {
+ printk(KERN_WARNING "No room in flip buffer\n");
+ return;
}
/* get pointer */
continue;
error_return:
- *tty->flip.char_buf_ptr++ = ch;
- *tty->flip.flag_buf_ptr++ = flg;
- tty->flip.count++;
+ tty_insert_flip_char(tty, ch, flg);
} /* End while (i--) */
.port = {
.irq = SMC1_IRQ,
.ops = &cpm_uart_pops,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.lock = SPIN_LOCK_UNLOCKED,
},
.flags = FLAG_SMC,
.port = {
.irq = SMC2_IRQ,
.ops = &cpm_uart_pops,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.lock = SPIN_LOCK_UNLOCKED,
},
.flags = FLAG_SMC,
.port = {
.irq = SCC1_IRQ,
.ops = &cpm_uart_pops,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.lock = SPIN_LOCK_UNLOCKED,
},
.tx_nrfifos = TX_NUM_FIFO,
.port = {
.irq = SCC2_IRQ,
.ops = &cpm_uart_pops,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.lock = SPIN_LOCK_UNLOCKED,
},
.tx_nrfifos = TX_NUM_FIFO,
.port = {
.irq = SCC3_IRQ,
.ops = &cpm_uart_pops,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.lock = SPIN_LOCK_UNLOCKED,
},
.tx_nrfifos = TX_NUM_FIFO,
.port = {
.irq = SCC4_IRQ,
.ops = &cpm_uart_pops,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.lock = SPIN_LOCK_UNLOCKED,
},
.tx_nrfifos = TX_NUM_FIFO,
}
tty_insert_flip_char(tty, ch, flag);
ignore_char:
+ ;
} while (status & DZ_DVAL);
if (tty)
for (i = 0, dport = dz_ports; i < DZ_NB_PORT; i++, dport++) {
spin_lock_init(&dport->port.lock);
dport->port.membase = (char *) base;
- dport->port.iotype = SERIAL_IO_PORT;
+ dport->port.iotype = UPIO_PORT;
dport->port.irq = dec_interrupt[DEC_IRQ_DZ11];
dport->port.line = i;
dport->port.fifosize = 1;
.rtsirq = UART1_MINT_RTS,
.port = {
.type = PORT_IMX,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.membase = (void *)IMX_UART1_BASE,
.mapbase = IMX_UART1_BASE, /* FIXME */
.irq = UART1_MINT_RX,
.rtsirq = UART2_MINT_RTS,
.port = {
.type = PORT_IMX,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.membase = (void *)IMX_UART2_BASE,
.mapbase = IMX_UART2_BASE, /* FIXME */
.irq = UART2_MINT_RX,
/* Lower and upper byte of baud rate generator divisor. */
write_zsreg(channel, R12, regs[R12]);
write_zsreg(channel, R13, regs[R13]);
-
+
/* Now rewrite R14, with BRENAB (if set). */
write_zsreg(channel, R14, regs[R14]);
else
clear_bits |= DTR;
- /* NOTE: Not subject to 'transmitter active' rule. */
+ /* NOTE: Not subject to 'transmitter active' rule. */
up->curregs[R5] |= set_bits;
up->curregs[R5] &= ~clear_bits;
write_zsreg(channel, R5, up->curregs[R5]);
if (new_reg != up->curregs[R15]) {
up->curregs[R15] = new_reg;
- /* NOTE: Not subject to 'transmitter active' rule. */
+ /* NOTE: Not subject to 'transmitter active' rule. */
write_zsreg(channel, R15, up->curregs[R15]);
}
}
if (new_reg != up->curregs[R5]) {
up->curregs[R5] = new_reg;
- /* NOTE: Not subject to 'transmitter active' rule. */
+ /* NOTE: Not subject to 'transmitter active' rule. */
write_zsreg(channel, R5, up->curregs[R5]);
}
#include <asm/serial.h>
/* Standard COM flags */
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
/*
* SERIAL_PORT_DFNS tells us about built-in ports that have no
unsigned int irq;
unsigned int flags;
unsigned char io_type;
- unsigned char *iomem_base;
+ unsigned char __iomem *iomem_base;
unsigned short iomem_reg_shift;
};
port->mapbase = dev->hpa.start + MUX_OFFSET +
(i * MUX_LINE_OFFSET);
port->membase = ioremap(port->mapbase, MUX_LINE_OFFSET);
- port->iotype = SERIAL_IO_MEM;
+ port->iotype = UPIO_MEM;
port->type = PORT_MUX;
port->irq = NO_IRQ;
port->uartclk = 0;
/*
* Init remaining bits of "port" structure
*/
- uap->port.iotype = SERIAL_IO_MEM;
+ uap->port.iotype = UPIO_MEM;
uap->port.irq = np->intrs[0].line;
uap->port.uartclk = ZS_CLOCK;
uap->port.fifosize = 1;
/* we can support 3 uarts, but not always use them */
+#ifdef CONFIG_CPU_S3C2400
+#define NR_PORTS (2)
+#else
#define NR_PORTS (3)
+#endif
/* port irq numbers */
sa1100_ports[i].port.ops = &sa1100_pops;
sa1100_ports[i].port.fifosize = 8;
sa1100_ports[i].port.line = i;
- sa1100_ports[i].port.iotype = SERIAL_IO_MEM;
+ sa1100_ports[i].port.iotype = UPIO_MEM;
init_timer(&sa1100_ports[i].timer);
sa1100_ports[i].timer.function = sa1100_timeout;
sa1100_ports[i].timer.data = (unsigned long)&sa1100_ports[i];
.port = {
.membase = (void*) io_p2v (UART1_PHYS),
.mapbase = UART1_PHYS,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = IRQ_UART1INTR,
.uartclk = 14745600/2,
.fifosize = 16,
.port = {
.membase = (void*) io_p2v (UART2_PHYS),
.mapbase = UART2_PHYS,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = IRQ_UART2INTR,
.uartclk = 14745600/2,
.fifosize = 16,
.port = {
.membase = (void*) io_p2v (UART3_PHYS),
.mapbase = UART3_PHYS,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = IRQ_UART3INTR,
.uartclk = 14745600/2,
.fifosize = 16,
.port = {
.membase = (void *)0xff923000,
.mapbase = 0xff923000,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 61,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 0,
},
.type = PORT_SCIF,
.port = {
.membase = (void *)0xff924000,
.mapbase = 0xff924000,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 62,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 1,
},
.type = PORT_SCIF,
.port = {
.membase = (void *)0xff925000,
.mapbase = 0xff925000,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 63,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 2,
},
.type = PORT_SCIF,
.port = {
.membase = (void *)0xffe00000,
.mapbase = 0xffe00000,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 43,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 0,
},
.type = PORT_SCIF,
.port = {
.membase = (void *)0xffe10000,
.mapbase = 0xffe10000,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 79,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 1,
},
.type = PORT_SCIF,
up->port.irq = edev->irqs[0];
up->port.fifosize = SAB82532_XMIT_FIFO_SIZE;
up->port.mapbase = (unsigned long)up->regs;
- up->port.iotype = SERIAL_IO_MEM;
+ up->port.iotype = UPIO_MEM;
writeb(SAB82532_IPC_IC_ACT_LOW, &up->regs->w.ipc);
offset <<= up->port.regshift;
switch (up->port.iotype) {
- case SERIAL_IO_HUB6:
+ case UPIO_HUB6:
outb(up->port.hub6 - 1 + offset, up->port.iobase);
return inb(up->port.iobase + 1);
- case SERIAL_IO_MEM:
+ case UPIO_MEM:
return readb(up->port.membase + offset);
default:
offset <<= up->port.regshift;
switch (up->port.iotype) {
- case SERIAL_IO_HUB6:
+ case UPIO_HUB6:
outb(up->port.hub6 - 1 + offset, up->port.iobase);
outb(value, up->port.iobase + 1);
break;
- case SERIAL_IO_MEM:
+ case UPIO_MEM:
writeb(value, up->port.membase + offset);
break;
return;
up->type_probed = PORT_UNKNOWN;
- up->port.iotype = SERIAL_IO_MEM;
+ up->port.iotype = UPIO_MEM;
/*
* First we look for Ebus-bases su's
up[(chip * 2) + 1].port.membase = (void __iomem *)&rp->channelB;
/* Channel A */
- up[(chip * 2) + 0].port.iotype = SERIAL_IO_MEM;
+ up[(chip * 2) + 0].port.iotype = UPIO_MEM;
up[(chip * 2) + 0].port.irq = zilog_irq;
up[(chip * 2) + 0].port.uartclk = ZS_CLOCK;
up[(chip * 2) + 0].port.fifosize = 1;
up[(chip * 2) + 0].flags |= SUNZILOG_FLAG_IS_CHANNEL_A;
/* Channel B */
- up[(chip * 2) + 1].port.iotype = SERIAL_IO_MEM;
+ up[(chip * 2) + 1].port.iotype = UPIO_MEM;
up[(chip * 2) + 1].port.irq = zilog_irq;
up[(chip * 2) + 1].port.uartclk = ZS_CLOCK;
up[(chip * 2) + 1].port.fifosize = 1;
port->ops = &v850e_uart_ops;
port->line = chan;
- port->iotype = SERIAL_IO_MEM;
+ port->iotype = UPIO_MEM;
port->flags = UPF_BOOT_AUTOCONF;
/* We actually use multiple IRQs, but the serial
static int nic_wait(struct ioc3_driver_data *idd)
{
- volatile unsigned mcr;
+ unsigned mcr;
do {
- mcr = (volatile unsigned)idd->vma->mcr;
+ mcr = readl(&idd->vma->mcr);
} while (!(mcr & 2));
return mcr & 1;
unsigned long flags;
local_irq_save(flags);
- idd->vma->mcr = mcr_pack(500, 65);
+ writel(mcr_pack(500, 65), &idd->vma->mcr);
presence = nic_wait(idd);
local_irq_restore(flags);
unsigned long flags;
local_irq_save(flags);
- idd->vma->mcr = mcr_pack(6, 13);
+ writel(mcr_pack(6, 13), &idd->vma->mcr);
result = nic_wait(idd);
local_irq_restore(flags);
static inline void nic_write_bit(struct ioc3_driver_data *idd, int bit)
{
if (bit)
- idd->vma->mcr = mcr_pack(6, 110);
+ writel(mcr_pack(6, 110), &idd->vma->mcr);
else
- idd->vma->mcr = mcr_pack(80, 30);
+ writel(mcr_pack(80, 30), &idd->vma->mcr);
nic_wait(idd);
}
int save = 0, loops = 3;
unsigned long first, addr;
- idd->vma->gpcr_s = GPCR_MLAN_EN;
+ writel(GPCR_MLAN_EN, &idd->vma->gpcr_s);
while(loops>0) {
idd->nic_part[0] = 0;
read_lock_irqsave(&ioc3_submodules_lock, flags);
- if(idd->dual_irq && idd->vma->eisr) {
+ if(idd->dual_irq && readb(&idd->vma->eisr)) {
/* send Ethernet IRQ to the driver */
if(ioc3_ethernet && idd->active[ioc3_ethernet->id] &&
ioc3_ethernet->intr) {
idd->id = ioc3_counter++;
up_write(&ioc3_devices_rwsem);
- idd->gpdr_shadow = idd->vma->gpdr;
+ idd->gpdr_shadow = readl(&idd->vma->gpdr);
/* Read IOC3 NIC contents */
probe_nic(idd);
static int sg_grt_trans(unsigned int fd, unsigned int cmd, unsigned long arg)
{
int err, i;
- sg_req_info_t *r;
- struct compat_sg_req_info *o = (struct compat_sg_req_info *)arg;
+ sg_req_info_t __user *r;
+ struct compat_sg_req_info __user *o = (void __user *)arg;
r = compat_alloc_user_space(sizeof(sg_req_info_t)*SG_MAX_QUEUE);
err = sys_ioctl(fd,cmd,(unsigned long)r);
if (err < 0)
static int
lp_timeout_trans(unsigned int fd, unsigned int cmd, unsigned long arg)
{
- struct compat_timeval *tc = (struct compat_timeval *)arg;
- struct timeval *tn = compat_alloc_user_space(sizeof(struct timeval));
+ struct compat_timeval __user *tc = (struct compat_timeval __user *)arg;
+ struct timeval __user *tn = compat_alloc_user_space(sizeof(struct timeval));
struct timeval ts;
if (get_user(ts.tv_sec, &tc->tv_sec) ||
get_user(ts.tv_usec, &tc->tv_usec) ||
->offset[((vaddr)&4095)>>2]
#define __REG32(paddr) __REGV32(io_p2v(paddr))
-extern void omap_map_common_io(void);
+extern void omap1_map_common_io(void);
+extern void omap1_init_common_hw(void);
+
+extern void omap2_map_common_io(void);
+extern void omap2_init_common_hw(void);
#else
* simply bail out immediately through the slow path where the lock will be
* reattempted until it succeeds.
*/
-#define __mutex_fastpath_lock(count, fail_fn) \
-do { \
- int __ex_flag, __res; \
- \
- typecheck(atomic_t *, count); \
- typecheck_fn(fastcall void (*)(atomic_t *), fail_fn); \
- \
- __asm__ ( \
- "ldrex %0, [%2] \n" \
- "sub %0, %0, #1 \n" \
- "strex %1, %0, [%2] \n" \
- \
- : "=&r" (__res), "=&r" (__ex_flag) \
- : "r" (&(count)->counter) \
- : "cc","memory" ); \
- \
- if (unlikely(__res || __ex_flag)) \
- fail_fn(count); \
-} while (0)
-
-#define __mutex_fastpath_lock_retval(count, fail_fn) \
-({ \
- int __ex_flag, __res; \
- \
- typecheck(atomic_t *, count); \
- typecheck_fn(fastcall int (*)(atomic_t *), fail_fn); \
- \
- __asm__ ( \
- "ldrex %0, [%2] \n" \
- "sub %0, %0, #1 \n" \
- "strex %1, %0, [%2] \n" \
- \
- : "=&r" (__res), "=&r" (__ex_flag) \
- : "r" (&(count)->counter) \
- : "cc","memory" ); \
- \
- __res |= __ex_flag; \
- if (unlikely(__res != 0)) \
- __res = fail_fn(count); \
- __res; \
-})
+static inline void
+__mutex_fastpath_lock(atomic_t *count, fastcall void (*fail_fn)(atomic_t *))
+{
+ int __ex_flag, __res;
+
+ __asm__ (
+
+ "ldrex %0, [%2] \n\t"
+ "sub %0, %0, #1 \n\t"
+ "strex %1, %0, [%2] "
+
+ : "=&r" (__res), "=&r" (__ex_flag)
+ : "r" (&(count)->counter)
+ : "cc","memory" );
+
+ __res |= __ex_flag;
+ if (unlikely(__res != 0))
+ fail_fn(count);
+}
+
+static inline int
+__mutex_fastpath_lock_retval(atomic_t *count, fastcall int (*fail_fn)(atomic_t *))
+{
+ int __ex_flag, __res;
+
+ __asm__ (
+
+ "ldrex %0, [%2] \n\t"
+ "sub %0, %0, #1 \n\t"
+ "strex %1, %0, [%2] "
+
+ : "=&r" (__res), "=&r" (__ex_flag)
+ : "r" (&(count)->counter)
+ : "cc","memory" );
+
+ __res |= __ex_flag;
+ if (unlikely(__res != 0))
+ __res = fail_fn(count);
+ return __res;
+}
/*
* Same trick is used for the unlock fast path. However the original value,
* rather than the result, is used to test for success in order to have
* better generated assembly.
*/
-#define __mutex_fastpath_unlock(count, fail_fn) \
-do { \
- int __ex_flag, __res, __orig; \
- \
- typecheck(atomic_t *, count); \
- typecheck_fn(fastcall void (*)(atomic_t *), fail_fn); \
- \
- __asm__ ( \
- "ldrex %0, [%3] \n" \
- "add %1, %0, #1 \n" \
- "strex %2, %1, [%3] \n" \
- \
- : "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag) \
- : "r" (&(count)->counter) \
- : "cc","memory" ); \
- \
- if (unlikely(__orig || __ex_flag)) \
- fail_fn(count); \
-} while (0)
+static inline void
+__mutex_fastpath_unlock(atomic_t *count, fastcall void (*fail_fn)(atomic_t *))
+{
+ int __ex_flag, __res, __orig;
+
+ __asm__ (
+
+ "ldrex %0, [%3] \n\t"
+ "add %1, %0, #1 \n\t"
+ "strex %2, %1, [%3] "
+
+ : "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag)
+ : "r" (&(count)->counter)
+ : "cc","memory" );
+
+ __orig |= __ex_flag;
+ if (unlikely(__orig != 0))
+ fail_fn(count);
+}
/*
* If the unlock was done on a contended lock, or if the unlock simply fails
__asm__ (
- "1: ldrex %0, [%3] \n"
- "subs %1, %0, #1 \n"
- "strexeq %2, %1, [%3] \n"
- "movlt %0, #0 \n"
- "cmpeq %2, #0 \n"
- "bgt 1b \n"
+ "1: ldrex %0, [%3] \n\t"
+ "subs %1, %0, #1 \n\t"
+ "strexeq %2, %1, [%3] \n\t"
+ "movlt %0, #0 \n\t"
+ "cmpeq %2, #0 \n\t"
+ "bgt 1b "
: "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag)
: "r" (&count->counter)
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2005 by Ralf Baechle
+ * Copyright (C) 2005, 06 by Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 2005 MIPS Technologies, Inc.
*/
#ifndef _ASM_ABI_H
#include <asm/siginfo.h>
struct mips_abi {
- int (* const do_signal)(sigset_t *oldset, struct pt_regs *regs);
+ void (* const do_signal)(struct pt_regs *regs);
int (* const setup_frame)(struct k_sigaction * ka,
struct pt_regs *regs, int signr,
sigset_t *set);
* variations of functions: non-prefixed ones that preserve the value
* and prefixed ones that preserve byte addresses. The latters are
* typically used for moving raw data between a peripheral and memory (cf.
- * string I/O functions), hence the "mem_" prefix.
+ * string I/O functions), hence the "__mem_" prefix.
*/
#if defined(CONFIG_SWAP_IO_SPACE)
# define ioswabb(x) (x)
-# define mem_ioswabb(x) (x)
+# define __mem_ioswabb(x) (x)
# ifdef CONFIG_SGI_IP22
/*
* IP22 seems braindead enough to swap 16bits values in hardware, but
* not 32bits. Go figure... Can't tell without documentation.
*/
# define ioswabw(x) (x)
-# define mem_ioswabw(x) le16_to_cpu(x)
+# define __mem_ioswabw(x) le16_to_cpu(x)
# else
# define ioswabw(x) le16_to_cpu(x)
-# define mem_ioswabw(x) (x)
+# define __mem_ioswabw(x) (x)
# endif
# define ioswabl(x) le32_to_cpu(x)
-# define mem_ioswabl(x) (x)
+# define __mem_ioswabl(x) (x)
# define ioswabq(x) le64_to_cpu(x)
-# define mem_ioswabq(x) (x)
+# define __mem_ioswabq(x) (x)
#else
# define ioswabb(x) (x)
-# define mem_ioswabb(x) (x)
+# define __mem_ioswabb(x) (x)
# define ioswabw(x) (x)
-# define mem_ioswabw(x) cpu_to_le16(x)
+# define __mem_ioswabw(x) cpu_to_le16(x)
# define ioswabl(x) (x)
-# define mem_ioswabl(x) cpu_to_le32(x)
+# define __mem_ioswabl(x) cpu_to_le32(x)
# define ioswabq(x) (x)
-# define mem_ioswabq(x) cpu_to_le32(x)
+# define __mem_ioswabq(x) cpu_to_le32(x)
#endif
BUG(); \
} \
\
-static inline type pfx##read##bwlq(volatile void __iomem *mem) \
+static inline type pfx##read##bwlq(const volatile void __iomem *mem) \
{ \
volatile type *__mem; \
type __val; \
\
__BUILD_MEMORY_PFX(__raw_, bwlq, type) \
__BUILD_MEMORY_PFX(, bwlq, type) \
-__BUILD_MEMORY_PFX(mem_, bwlq, type) \
+__BUILD_MEMORY_PFX(__mem_, bwlq, type) \
BUILDIO_MEM(b, u8)
BUILDIO_MEM(w, u16)
#define BUILDIO_IOPORT(bwlq, type) \
__BUILD_IOPORT_PFX(, bwlq, type) \
- __BUILD_IOPORT_PFX(mem_, bwlq, type)
+ __BUILD_IOPORT_PFX(__mem_, bwlq, type)
BUILDIO_IOPORT(b, u8)
BUILDIO_IOPORT(w, u16)
const volatile type *__addr = addr; \
\
while (count--) { \
- mem_write##bwlq(*__addr, mem); \
+ __mem_write##bwlq(*__addr, mem); \
__addr++; \
} \
} \
volatile type *__addr = addr; \
\
while (count--) { \
- *__addr = mem_read##bwlq(mem); \
+ *__addr = __mem_read##bwlq(mem); \
__addr++; \
} \
}
const volatile type *__addr = addr; \
\
while (count--) { \
- mem_out##bwlq(*__addr, port); \
+ __mem_out##bwlq(*__addr, port); \
__addr++; \
} \
} \
volatile type *__addr = addr; \
\
while (count--) { \
- *__addr = mem_in##bwlq(port); \
+ *__addr = __mem_in##bwlq(port); \
__addr++; \
} \
}
#define TIF_NEED_RESCHED 3 /* rescheduling necessary */
#define TIF_SYSCALL_AUDIT 4 /* syscall auditing active */
#define TIF_SECCOMP 5 /* secure computing */
+#define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal() */
#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */
#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */
#define TIF_MEMDIE 18
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT)
#define _TIF_SECCOMP (1<<TIF_SECCOMP)
+#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
#define _TIF_USEDFPU (1<<TIF_USEDFPU)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define __NR_inotify_init (__NR_Linux + 284)
#define __NR_inotify_add_watch (__NR_Linux + 285)
#define __NR_inotify_rm_watch (__NR_Linux + 286)
-
+#define __NR_migrate_pages (__NR_Linux + 287)
+#define __NR_openat (__NR_Linux + 288)
+#define __NR_mkdirat (__NR_Linux + 289)
+#define __NR_mknodat (__NR_Linux + 290)
+#define __NR_fchownat (__NR_Linux + 291)
+#define __NR_futimesat (__NR_Linux + 292)
+#define __NR_newfstatat (__NR_Linux + 293)
+#define __NR_unlinkat (__NR_Linux + 294)
+#define __NR_renameat (__NR_Linux + 295)
+#define __NR_linkat (__NR_Linux + 296)
+#define __NR_symlinkat (__NR_Linux + 297)
+#define __NR_readlinkat (__NR_Linux + 298)
+#define __NR_fchmodat (__NR_Linux + 299)
+#define __NR_faccessat (__NR_Linux + 300)
+#define __NR_pselect6 (__NR_Linux + 301)
+#define __NR_ppoll (__NR_Linux + 302)
+#define __NR_unshare (__NR_Linux + 303)
/*
* Offset of the last Linux o32 flavoured syscall
*/
-#define __NR_Linux_syscalls 286
+#define __NR_Linux_syscalls 303
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
#define __NR_O32_Linux 4000
-#define __NR_O32_Linux_syscalls 283
+#define __NR_O32_Linux_syscalls 303
#if _MIPS_SIM == _MIPS_SIM_ABI64
#define __NR_inotify_init (__NR_Linux + 243)
#define __NR_inotify_add_watch (__NR_Linux + 244)
#define __NR_inotify_rm_watch (__NR_Linux + 245)
+#define __NR_migrate_pages (__NR_Linux + 246)
+#define __NR_openat (__NR_Linux + 247)
+#define __NR_mkdirat (__NR_Linux + 248)
+#define __NR_mknodat (__NR_Linux + 249)
+#define __NR_fchownat (__NR_Linux + 250)
+#define __NR_futimesat (__NR_Linux + 251)
+#define __NR_newfstatat (__NR_Linux + 252)
+#define __NR_unlinkat (__NR_Linux + 253)
+#define __NR_renameat (__NR_Linux + 254)
+#define __NR_linkat (__NR_Linux + 255)
+#define __NR_symlinkat (__NR_Linux + 256)
+#define __NR_readlinkat (__NR_Linux + 257)
+#define __NR_fchmodat (__NR_Linux + 258)
+#define __NR_faccessat (__NR_Linux + 259)
+#define __NR_pselect6 (__NR_Linux + 260)
+#define __NR_ppoll (__NR_Linux + 261)
+#define __NR_unshare (__NR_Linux + 262)
/*
* Offset of the last Linux 64-bit flavoured syscall
*/
-#define __NR_Linux_syscalls 245
+#define __NR_Linux_syscalls 262
#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
#define __NR_64_Linux 5000
-#define __NR_64_Linux_syscalls 242
+#define __NR_64_Linux_syscalls 262
#if _MIPS_SIM == _MIPS_SIM_NABI32
#define __NR_inotify_init (__NR_Linux + 247)
#define __NR_inotify_add_watch (__NR_Linux + 248)
#define __NR_inotify_rm_watch (__NR_Linux + 249)
+#define __NR_migrate_pages (__NR_Linux + 250)
+#define __NR_openat (__NR_Linux + 251)
+#define __NR_mkdirat (__NR_Linux + 252)
+#define __NR_mknodat (__NR_Linux + 253)
+#define __NR_fchownat (__NR_Linux + 254)
+#define __NR_futimesat (__NR_Linux + 255)
+#define __NR_newfstatat (__NR_Linux + 256)
+#define __NR_unlinkat (__NR_Linux + 257)
+#define __NR_renameat (__NR_Linux + 258)
+#define __NR_linkat (__NR_Linux + 259)
+#define __NR_symlinkat (__NR_Linux + 260)
+#define __NR_readlinkat (__NR_Linux + 261)
+#define __NR_fchmodat (__NR_Linux + 262)
+#define __NR_faccessat (__NR_Linux + 263)
+#define __NR_pselect6 (__NR_Linux + 264)
+#define __NR_ppoll (__NR_Linux + 265)
+#define __NR_unshare (__NR_Linux + 266)
/*
* Offset of the last N32 flavoured syscall
*/
-#define __NR_Linux_syscalls 249
+#define __NR_Linux_syscalls 266
#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
#define __NR_N32_Linux 6000
-#define __NR_N32_Linux_syscalls 246
+#define __NR_N32_Linux_syscalls 266
#ifndef __ASSEMBLY__
return (void __user *)(unsigned long)uptr;
}
+static inline compat_uptr_t ptr_to_compat(void __user *uptr)
+{
+ return (u32)(unsigned long)uptr;
+}
+
static inline void __user *compat_alloc_user_space(long len)
{
struct pt_regs *regs = current->thread.regs;
int preempt_count; /* 0 => preemptable,
<0 => BUG */
struct restart_block restart_block;
- void *nvgprs_frame;
+ void __user *nvgprs_frame;
/* low level flags - has atomic operations done on it */
unsigned long flags ____cacheline_aligned_in_smp;
};
#define segment_eq(a,b) ((a).ar4 == (b).ar4)
-static inline int __access_ok(const void *addr, unsigned long size)
+static inline int __access_ok(const void __user *addr, unsigned long size)
{
return 1;
}
case 1: { \
unsigned char __x; \
__get_user_asm(__x, ptr, __gu_err); \
- (x) = *(__typeof__(*(ptr)) *) &__x; \
+ (x) = *(__force __typeof__(*(ptr)) *) &__x; \
break; \
}; \
case 2: { \
unsigned short __x; \
__get_user_asm(__x, ptr, __gu_err); \
- (x) = *(__typeof__(*(ptr)) *) &__x; \
+ (x) = *(__force __typeof__(*(ptr)) *) &__x; \
break; \
}; \
case 4: { \
unsigned int __x; \
__get_user_asm(__x, ptr, __gu_err); \
- (x) = *(__typeof__(*(ptr)) *) &__x; \
+ (x) = *(__force __typeof__(*(ptr)) *) &__x; \
break; \
}; \
case 8: { \
unsigned long long __x; \
__get_user_asm(__x, ptr, __gu_err); \
- (x) = *(__typeof__(*(ptr)) *) &__x; \
+ (x) = *(__force __typeof__(*(ptr)) *) &__x; \
break; \
}; \
default: \
extern void elv_dispatch_sort(request_queue_t *, struct request *);
extern void elv_add_request(request_queue_t *, struct request *, int, int);
extern void __elv_add_request(request_queue_t *, struct request *, int, int);
+extern void elv_insert(request_queue_t *, struct request *, int);
extern int elv_merge(request_queue_t *, struct request **, struct bio *);
extern void elv_merge_requests(request_queue_t *, struct request *,
struct request *);
int id; /* IOC3 sequence number */
/* PCI mapping */
unsigned long pma; /* physical address */
- struct __iomem ioc3 *vma; /* pointer to registers */
+ struct ioc3 __iomem *vma; /* pointer to registers */
struct pci_dev *pdev; /* PCI device */
/* IRQ stuff */
int dual_irq; /* set if separate IRQs are used */
#define PCI_VENDOR_ID_AFAVLAB 0x14db
#define PCI_DEVICE_ID_AFAVLAB_P028 0x2180
#define PCI_DEVICE_ID_AFAVLAB_P030 0x2182
+#define PCI_SUBDEVICE_ID_AFAVLAB_P061 0x2150
#define PCI_VENDOR_ID_BROADCOM 0x14e4
#define PCI_DEVICE_ID_TIGON3_5752 0x1600
struct v4l2_clip
{
struct v4l2_rect c;
- struct v4l2_clip *next;
+ struct v4l2_clip __user *next;
};
struct v4l2_window
#ifdef CONFIG_SMP
-void *__alloc_percpu(size_t size, size_t align)
+void *__alloc_percpu(size_t size)
{
int i;
struct percpu_data *pdata = kmalloc(sizeof (*pdata), GFP_KERNEL);
projects / linux-2.6-omap-h63xx.git / commitdiff